My Sourcing

LanguageEnglish

Products

Services

Suppliers

Please enter a valid keyword with 2 or more characters / numbers.

2016 V4 Slim 3D Pen Support Power Bank
2016 V4 Slim 3D Pen Support Power Bank
Production Lead Time:
7 day(s)
JER Education Technology Co.,Limited
Guangdong, Mainland China
Wholesaler
Wholesaler
Average Response time:N/A
This label indicates the credibility and capabilities of a supplier in 3 levels: Gold, Silver and Bronze.
SUPPLIER INFO LAST UPDATED: Jan 31, 2020
ADVERTISE SINCE: Jan 31, 2014
Product Attribute(s)
Model No.:
RP600A-yellow
Brand:
OEM
Colour:
Blue, Purple, White, Yellow
Size:
(L x W x H) 175 x 17 x 20mm
Port:
Huangpu
Type of Payment:
TT, PayPal, Western Union
Minimum Order Quantity:
100
Package:
Yes
Customised:
Yes
Interface Type:
USB
Products Status:
Stock
Description
2016 new design slim 3D Pen can use power bank

Operation instructions

1.connect AC/DC adapter to AC power socket and 3D pen DC power socket (or use the USB cable to connect with the power bank which output is more than 2A), when the red LED turns on,the pen is in the stanby status.
2. press the filament loading button,it starts to heat,and the green light will flash,after around 40 seconds ,the green light stop flashing,it means it is ready for loading filament
3.insert the 1.75mm filament into the "filament loading hole",Keep pressing the "filament loading button",the material will be loaded . Hold till plastic material comes out from the nozzle ,it means the filament is ready.( Double press the button can load the filament automatically, press the button again to exit automatic mode)
4. temperature adjustment :open the black cover ,and use the plastic screwdriver to turn the temperature switch(clockwise temperature up,anticlockwise temperature down,each level is 15°C),temperature range is 130°C-240°C
5.speed adjustment :slip the speed controller to adjust the speed
6 unload filament:do as the Item 2,then press unload filament button ,the filament will move out automatically.(Double press the button can unload the filament automatically, press the button again to exit automatic mode)
7. replace nozzle set:open the black cover by the plastic screwdriver ,and remove the screw,then plug off the nozzle set
8. the pen will enter standby mode after 2 minutes no operation,and press the loading filament button to wake it up.
9.do not touch the nozzle during working

Note
1.heating time may be affected by environmental temperature
2.the filament end should be cut correctly before loading
3.suggest to unload the filament after finish drawing