My Sourcing

LanguageEnglish

Products

Services

Suppliers

Please enter a valid keyword with 2 or more characters / numbers.

7W LED Spotlight Bulb
7W LED Spotlight Bulb
Jiashan Sunovo Lighting Technology Co.,Ltd

Jiashan Sunovo Lighting Technology Co.,Ltd

Zhejiang, Mainland China

Exporter, Manufacturer

Average Response time

N/A

SUPPLIER INFO LAST UPDATED: 31 Jul 2020

ADVERTISE SINCE: 31 Jan 2011

Product Attribute(s)
Model No.:
SV-LB-070BNG
Brand:
SUNOVO
Colour:
Black, White
Port:
Shanghai
Minimum Order Quantity:
1 piece
Description
This LED spotlight bulb comes with a sophisticated housing with good thermal dissipation. The LED light source lowers energy costs and has a long lifespan. The well-made bulb is an economical choice for the general lighting of various locations.
  • Watts: 7W.
  • Input voltage: AC90-265V.
  • Base: GU10.
  • Color temperature: 2,700-7,000K.
  • Luminous flux: 450-480lm.
  • CRI: +80.
  • Beam angle: 38 degrees.
  • Non-dimmable carton (pc): 100.
  • G.W. carton (kg): 7 cartons.
  • Measurement: 27 x 27 x 30cm.
  • Heat conductive plastic has a higher rate of thermal conductivity than normal plastic.
  • It can work in the field of cooling where only metal can be used.
  • Because of the development of thermally conductive plastic and its advantages compared to metal, more and more LED lights with heat conductive plastic housing have been seen in the market.
  • The possibility of using heat conductive plastic LED disperse its heat to cooler by heat conduction, then disperse it into surrounding by convection and radiation.
  • During this easy model, the function of heat dissipation factor only works from inside cooler to outside cooler.
  • During this process of dissipation, when the cooler's heat dissipation factor passes one certain value, there is only little difference between different materials.
  • Advantage of heat conductive plastic: comparison item: aluminum heat conductive.
  • Plastic working quality product efficiency (lead time).
  • Middle short processing temperature 700-750 260-300.
  • Mold life: short long.
  • Equipment complex easy need second time to process: yes.
  • No characteristic heat dissipation.
  • Factor: 100W/mk 10W/mk.
  • Thermal radiation factor: 0.1-0.2 0.8-0.9.
  • Toughness: good good (24kj/m2).
  • Stretching factor: good good (58Mpa).
  • Insurability: bad (electric conduction) good (high pressure resistant 4,000V).
  • Environment protection recycling: good good.
  • Environment protection: bad good.
  • Low-weight 40% lighter than aluminum.
  • Mass-production ability.
  • The cycle time are shortened to 12 minutes per part.
  • High-diversity injection molds.
  • The cost can be cut down with mass production.
  • Electricity-insulation.
  • The insulation treatment can be moved away.
  • HS code: 9405409000.

You may also like