Q Q International

The TENS device is a transcutaneous electrical nerve stimulator intended for symptomatic relief of chronic intractable pain and the temporary relief of pain associated with sore and aching muscles in the arm, shoulder, neck, back, waist, abdomen, and leg due to strain from exercise or normal household and work activities. 

wireless tens unit for period pain relief 

Lisun Group (Hong Kong) Limited

The SG61000-5 is an automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) . How does a surge generator work?The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching. It fully meets the IEC 61000-4-5, EN61000-4-5 and GB/T17626.5 standards. Specifications: LISUN ModelSG61000-5SASG61000-5SG61000-5H-SPSG61000-5H15-SPSG61000-5H20-SPSG61000-5HOutput Voltage(Open)1.2/50μs±20%1.2/50μs±20%1.2/50μs±20%1.2/50μs±20%1.2/50μs±20%1.2/50μs±20%Output Current(Short)8/20μs±20%8/20μs±20%8/20μs±20%8/20μs±20%8/20μs±20%8/20μs±20%Output Impedance2Ω and 12Ω2Ω and 12Ω2Ω, 12Ω and 500Ω2Ω, 12Ω and 500Ω2Ω, 12Ω and 500Ω2Ω, 12Ω and 500ΩOutput VoltageRange0~4.8KV±10%0~6KV±10%0~10KV±10%0~15KV±10%0~20KV±10%0~10KV±10%Output CurrentRange0~2.4KA±10%0~3KA±10%0~5KA±10%0~7.5KA±10%0~10KA±10%0~5KA±10%Surge Repetition1~9999 times1~9999 times1~9999 times1~9999 times1~9999 times1~9999 timesPolarityPositive, Negative or Automatic switchingPhase ShiftAsynchronous, Synchronization 0°~ 360° or Specific AngleSpecial FunctionN/ABuilt-in High voltage and current 2000:1 attenuator probe (6KV or less than 6KV surge generator is 1000:1), the probe can connect with LISUN OSP1102 directlyOperation WayButton InputTouch screen with super big LCD and built-in Windows CEDimensions(W*D*H)44*45*35cm44*45*35cm72*61*175cm72*61*175cm90*80*175cm44*45*155cmGross WeightAbout 30kgAbout 30kgAbout 120kgAbout 150kgAbout 180kgAbout 80kgCoupling Decoupling Network(Built-in CDN)Includes a AC440V/16A single phase CDNIncludes a AC440V/20A 3phases CDNCDN for Power Lines(External Optional)It can be selected according to the maximum output voltage of the surge and the maximum input of the EUT. Please visit LISUN CDN61000-5P to learn more details.N/ACDN for Communication Lines(External Optional)It can be selected according to the type of EUT, data transmission rate and surge output waveform. Please visit LISUN CDN61000-5C to learn more details.Isolution Transformerfor EUT(External Optional)LISUN ITEU-SP4K (220V Single Phase) or ITUS-SP2K (110V Single Phase)LISUN ITEU-TP10K or ITUS-TP5K

 SG61000-5 Surge Generator

Profit Charm Star Electrical Appliances Ltd

PC5209-Mini B/O Blower
<ul>
	<li>This mini blower is a very powerful and useful for cleaning keyboard, monitors, PC fans and the general areas surrounding a PC</li>
	<li>Batteries operated (Require 2 x AAA, not required)</li>
	<li>It is compact in size and easy to store</li>
	<li>It is lightweight and very handy to use in home and office</li>
	<li>Any colors are available.</li>
	<li>China Patent No. ZL 2019 3 1236585.4</li>
</ul>


PC5209-Mini B/O Blower

Luen Yick Electrical Mfg Co Ltd

- Comply to EN60998-1, EN60998-2-1 standards - Zinc-plated steel cage terminal - Ambient temperature : T85-110 oC - Housing made from Polypropylene (V-2 grade) or available for Polyamide 66 material - Colour in white or black - T04S :24A, wiring capacity Max. 4.0mm2; T06S : 32A, wiring capacity Max. 6.0mm2; T10S : 57A, wiring capacity Max. 10mm2; T16S : 76A, wiring capacity Max. 16mm2; T25S : 101A, wiring capacity Max. 25mm2 - Price for online purchase is for T04S  #electrical, #electrical parts, #terminal block, #12 way, #kengo, #wiring, #connection, #lighting accessories &amp; parts 

12 Way 450V Terminal Blocks - Steel Cage

	220-240V AC, 32A	Manufactured to BS Standard	Meets all UK and EU Regulations	Dimensions: 87.5 mm (W) x 87.5 mm (H)	Stainless Steel	Key Card Switch	Grounding: Standard Grounding	Application:Commercial,Industrial,Residential / General-PurposeFeatures:	Modern and sleek screwless design	Ultra slim metal front plate made with premium grade material	High quality steel rockers and copper contacts	Integral gasket for moisture protection	Includes mounting screws for easy installation	Fits easily and quickly into 16 mm to 47 mm back boxes	Full fitting instructions for simple installation	Available with Stainless Steel, Polished Chrome, Black Nickel, Matt Black and Chrome, Matt White &amp; Polished Brass finishes

Screwless Flat Profile 32A Key Card Switch

AST Group Co Ltd

Petite in size, this coiling device engages a lovely little girl silhouette and boasts an overall colorful look to appeal eyes. It is undoubtedly a nifty promotional gift and souvenir for corporate events. Customized designs are also welcomed to suit personal preference.

Features:
&bull; Material: soft PVC/silicon/ATBC.
&bull; Petite shape.
&bull; Little girl design.
&bull; Polished rear.
&bull; Colorful appeal.
&bull; A neat promotional gift and souvenir idea.
&bull; Available with EN71, 3D versions and non-phthalates materials.
&bull; Welcome customized logos, shapes and designs.

Coiling Device

Input: 220-240V~50HzCombination contain:– 2 x 13A BS Socket– USB A &amp; C quick charger– Dual USB Output:Max. 12V 20WConstruction: Metal casingOptional other National Sockets:China, South Africa and Universal socketComply to CE, BS, RoHS and ErP Features:Suitable for undercabinet and undershelf mountingIdeal for kitchen, home office and work stationFull fitting instructions for simple installationSocket Available: BS(15A), CCC, UNI  #usbsocket, #stainlesssteelusbsocket, #metallicusbsocket, #undercabinetusbsocket, #usbchargingsocket, #bssocket 

Undershelf Power Unit

ULTMOST ELECTRONIC LTD

Better than similar products on the market: 1. After the battery is fully charged, the running time is TRULY longer than 60 minutes.   (The long operation time is not contributed from "light weight" but from the special gear transmission design. If an electric mop is too light, it lacks friction and cannot mop clean; if it is too heavy, it consumes power. This model has an appropriate weight, and through a special structural design, the battery can still work continuously for more than 60 minutes after a full charge.) 2. Use brushless motor  (Stable, efficient, power-saving, durable) 3. Install anti-collision strip to avoid damaging furniture 4. Mist water spray, spray more evenly 5. CONDENSER LENS lens spot light (not just a regular LED light) design, no dirt can escape 6. Install a long mop on the rear edge to wipe away residual water stains so that there are no residual water marks after mopping. 7. Install dual rear wheels to make the mop easier to move and store 8. The special water tank cover design prevents water from leaking out when the machine is tilted to remove or install mops. 9. Using RF wireless control and placing the battery on the main unit, there is no wire connection between the tow bar and the host; therefore, there is no hidden danger of wearing out the wires between the tow bar and the main unit due to frequent rotation of the tow bar. 

CORDLESS ELECTRIC MOP (Advanced Version)

- 220-240V- 10 Watt- For 10W G24q-1 PLC Lamp  Features :  - 13W and 18W available - Durable, practical and exceptional value- Clear terminals for easy wiring and installation- Manufactured from quality material and components- Ceiling roses and pull cord switches available with standard urea white and metal finishes- Meets BS Safety Standards  #electrical parts, #electrical, #lighting accessories &amp; parts, #wiring accessories, #ceiling accessories, #kengo, #BS, #10W, #13W, #18W 

Low Energy PLC Lampholder (10W)

ONLINESHOP SRL

 Touch switch and dimmerThe PNI SafeHome DIM101 touch and dimmer switch is an innovative, elegant and modern device that combines the classic functionality of a switch (On/Off) with light intensity control (dimmer). Touch sensitive on/off buttonOne of the outstanding aspects of this switch is its modern, minimalist and elegant design, which blends perfectly into any decor. The switch is equipped with a touch-sensitive panel, which allows the lighting to be controlled by simply touching its surface.   Adjusting the light intensity (dimming)The dimming function is another important aspect of this switch. With the help of this feature, the user can adjust the intensity of the light so as to create the right atmosphere for any moment or need, from a bright light for precision activities, to a softer light for a relaxing atmosphere. No neutral cable requiredThe PNI SafeHome DIM101 Dimmer and Touch Switch operates on an advanced technology that exploits the Live (Phase) power cable to provide the necessary power for operation. This eliminates the need for an additional Neutral wire, reducing the time, cost and effort associated with installing a conventional system.   

Simple switch with touch and dimmer PNI SafeHome DIM101, 1X700W, Live Wire

Manufactured to BS StandardCE and RoHS certifiedMeets all UK and EU RegulationsDimensions: 87.5mm(W) x 147.9mm(H)Stainless SteelFeatures: Decorative raised profile design in Stainless Steel finishMetal front plate and rocker switch made with high quality steel materialConstructed from high temperature resistant thermoset materialIntegral gasket for moisture protectionIncludes mounting screws for easy installationFits easily and quickly into 35mm to 47mm back boxesFull fitting instructions for simple installationAvailable with black or white inserts #wallsocket, #shaversocket, #shaveroutlet, #socketoutlets, #walloutlets, #wallsocket #premiummaterial, #goodprotection, #dualvoltageshaversocket, #115vsocket, #230vsocket 

Metal Curve Profile Dual Voltage Shaver Socket 115V/230V

Zhuhai Tessan Power Technolongy Co.,Ltd

15ft Flat Plug Extension Cord: The USB power outlet with long power cord, which solves the problem of space too far from the socket, such as living room, bedroom, home office; 45 Degree convenient space saving low profile flat head allows you to put a desk snug against the wall without the plug impeding it at allMultiple Security Protection: The surge protector with a 1050 joule energy rating can provide basic protection for your electronics from power surge attacks that might be caused by the unstable power supply, lighting, and storm; This multiple outlet strip also built in circuit breaker that will trip off automatically to protect your devices while the power overloads, keep your expensive computers, TV safe from circuit overload12 in 1 Desktop Charging Station: The desk power hub has 9 AC outlets and 3 USB ports; Its 15A heavy duty 15 ft power cord rated 1875W, so these AC outlets can handle more appliances; The USB port provides a 5V/2.4A max charging current in one port at a time and total 3A/15W output

Cube 09

 Electricity saverThe PN100 ES100 is designed to power the hotel room only in the presence of the guest. When the guest enters the room, inserts the card to turn on the power, and when leaving the room, the timer will give it 15 seconds after the card is pulled out to stop the power. Optional: 13.56 MHz RFID proximity cardA compatible accessory for this product is the 13.56 MHz EMC-05 PNI proximity card.  

PNI switch for power supply hotel room ES100 Mifare 13.56MHz, Electricity saver

Beautiful designing , small and portable, it does not affect the side socket and expands at the same time. For bedroom bedside, study room, home use, office use, using intelligent shunt chip. 

Wall Outlet Extender TS-222

Microtech Technology Co Ltd

Product numberMTR070WV60A-V1ProcessorCortex-A8 architecture, clocked at 1.0GHZMemory512MB of DDR3Flash256MB of Nand-FlashScreen size7 inchesResolution800x480DisplayWide temperature type, 64K colors or 260,000 colorsLED backlightLife &gt; 25000 hoursTouch screenFour-wire resistive touch screen (integrated driver in Wince system)Operating systemWindows CE 6.0 R3Protection classIP65 (front panel)Working conditions12-24V DC, 600mAOperating temperature・10~55℃・20~80℃ (Storage temperature)Working humidity10~90%RHHardware interfaceFour-way 3-wire RS-232 serial ports (C0M1, COM2, COM3, COM4), two of which (C0M1, COM2) can be used as RS-485 bus interface extensions (optional with isolation mode)A secondary isolated CAN bus interface. (optional)-Use the built-in W coin interface. (optional)One USB Device interface, support Active sync and PC synchronous communication and joint debugging applicationTwo-way USB Host interface, support mouse, keyboard, U disk and other devicesOne use 100M Ethernet interfaceSD/MMC interface, support SD card and MMC cardDC12V-24V, with isolated industrial electric boat case, higher reliabilityStructureplastic shellPanel size206.00x142.00 (mm)Hole Size195.60x131.60 (mm)NoticeWhen the serial port is connected, the GND ground of the two devices must be connected together to avoid burning the serial port chip and affecting the communication.  

7inch 800*480 All-in-one terminal Windows CE Embedded industrial touch screen with WIFI

   General description:    This LVDS interface board can be applied to CMI AT070TN94,TM070RD13, AT080TN52   V.1, AT102TN03 V.9   Color TFT LCD   It could generate all kinds of timing control signal to   The LCD source and gate drivers, please check with LCD specification carefully before using this board       Application scope:    Security   PC monitor   Industry control monitor   POS   Medical equipment       Features:    LVDS input and TTL input (optional)   Power input: DC + 3.3V, 5V (optional)   Dimmable for backlight   Operating temperature: 200 to 700&deg;C      IF YOU HAVE ANY QUESTION ,PEASE&nbsp;CONNECT US FOR MORE DETAILS!
NO.0755-83725193
http://www.microtech-lcd.com/
&nbsp;

TCon Board LVDS, Input or TTL Input to RGB Interface Timing Control Board

Sync with Amazon Alexa and Google Home through the Tuya Smart applicationYou can control the PNI SmartHome WP800 socket directly from the Amazon, Alexa or Google Assistant smart speaker. Synchronize the Tuya Smart application with the Amazon Alexa application or Google Assistant and you can give commands that allow you to control the electricity in your home. From anywhereRemote control from your mobile phone to all appliances in the house, you will make it simple, just connect the electrical equipment to the smart socket SmartHome WP800 and so you can have control over your home no matter where you are at that time. Everything on the phone you can monitor consumption on the connected socket. 

PNI SmartHome WP800 Wi-Fi internet-enabled smart plug, Tuya Smart App, compatible with Amazon Alexa and Google Home

Tek Electronics (HK) Co Ltd

ABB ProcessMaster FEP300 series electromagnetic flow meter: FEP311.                        FEP315               FEP315(without explosion protection).              (Zone 2 / Division 2)         (Zone 1 / Division 1) Sensors FEP321.                               FEP325.                  FEP325 (without explosion protection)         (Zone 2 / Division 2)          (Zone 1 / Division 1) Transmitters: FET321.                               FET325.                  FET325 (without explosion protection)         (Zone 2 / Division 2)          (Zone 1 / Division 1) Measured error Default: 0.4 % of measured value, 0.2 % of measured valueNominal diameter range DN 3 ... 2000 (1/10 “ ... 80 ")Process connection6) Flange in accordance with DIN 2501 / EN 1092-1, ASME B16.5 / B16.47, JIS, AS2129Nominal pressure PN 10 … 100, ASME CL 150, 300, 600, 900, 1500, 2500Liner Hard rubber (DN 15 ... 2000), soft rubber (DN 50 ... 2000), PTFE (DN 10 ... 600),PFA (DN 3 ... 200), ETFE (DN 25 ... 600), Linatex (DN 50 ... 600)Conductivity &gt; 5 μS/cm (20 μS/cm for demineralized water)Electrodes Stainless steel, Hastelloy B, Hastelloy C, platinum-iridium, tantalum, titanium, tungsten carbideProcess connection material Steel, stainless steelIP rating IP 65, IP 67Measuring medium temperature -25 ... 180 °C (-13 ... 356 °F)Power supply 100 ... 230 V AC (-15 / +10%), 24 V AC (-30 / +10%), 24 V DC (-30 / +30%)current output 4 ... 20 mA, active or passivePulse output Can be configured locally as active or passive using softwareSwitch output / switch input Optoelectronic coupler, programmable functionDisplay Graphical display, configurableHousing Integral mount design: choice of single-compartment housing or dual-compartment housing.Communication HART protocol (standard), PROFIBUS PA, FOUNDATION Fieldbus (option)Explosion protection approvals • ATEX / IECEx zone 1, 2, 21, 22• FM / cFM Cl 1 Div 1 (≤ DN 300), Cl 1 Div 2• NEPSI zone 1, 2• GOST zone 1, 2Pressure Equipment Directive 97/23/EC Conformity assessment in accordance with category III, fluid group 1CRN (Canadian Reg.Number) On request  

ABB Electromagnetic flow meter FEP311/FEP315/FEP321/FEP325/FET321/FET325

1920*1080 high brightness 750 nits 11.6 inch LCD IPS screen EDP tft display LCD module This module is a color active matrix LCD module incorporating Oxide TFT (Thin Film Transistor).It is composed of acolor TFT-LCD panel, driver ICs, a control circuit and power supply circuit. Graphics and texts can be displayed on a1920×3×1080 dots panel with 262144 colors by using eDP (Embedded Display Port) Ver1.2 interface and supplying +3.3VDC supply voltage for TFT-LCD panel driving.In this TFT-LCD panel, color filters for excellent color performance is incorporated to realize brighter and clearerpictures, making this Module optimum for use in multi-media applications.Optimum viewings are in all directions. 9serial4paralel LED structure.Backlight-driving LED controller is built in this Module. eDPtransfer rate specification: 2.7Gbps/2 lane. ParameterSpecificationUnitRemarksPanel Size11.6”inchNumber of Pixels1920*RGB(3)*1080pixelsActive Area256.32(H) × 144.18(V)mmPixel pitch0.1335(H) x 0.1335(V)smmOutline Dimension267.72(H)*164.42(V)*6.1(D)Number of Colors16.7MDisplay ModeNormally BlackDisplay FormatRGB vertical stripeLuminance (cd/m^2)750(TYP.)nitInterfaceeDPBacklightWhite LEDOperation Temperature0~50℃Storage Temperature-20~60℃WeightTBDg  

1920*1080 High Brightness 750 Nits 11.6 inch LCD IPS Screen EDP TFT Display LCD Module

Non-blocking 4 sided Vertical design Mini Size &amp; Stable Base Overload Protection Switch 6ft Heavy Duty Copper extension cord low profile flat plug Grounded light &amp; Protected light 

Tower power strip TPS03

Kingtel & Sela Technology Corp.

 . USB PD/QC3.0 suits Apple, SAMSUNG,  OPPO, VIVO, HUAWEI, XIAOMI, etc. for  quick charge . 5 US sockets . USB-C: PD 20W/QC 3.0 for quick charge  USB-2A: 5V 2A . A master switch with LED indication . Lightning/Surge protection (optional) . Overload protection (optional) . Product length: 1.8m . Power: 110-125V AWG#18 (9A) 1125W . Safety shutter to protect children from the  risk of electrical shock . Fireproof ABS+PC housing . Over 15000 times plug in and out . High quality cooper sheet with high  conductivity . Desk/Wall mounting 

US-3015PD US Power Extension with 5 Outlets, A master switch, USB PD 20W/QC3.0 for Quick Charge, Lightning & Overload Protection

ABB Cabinet-built single drives ACS880-07. Model list: ACS880-07-0061A-7 ACS880-07-0084A-7 ACS880-07-0096A-5 ACS880-07-0098A-7 ACS880-07-0105A-3 ACS880-07-0119A-7 ACS880-07-0124A-5 ACS880-07-0142A-7 ACS880-07-0145A-3 ACS880-07-0156A-5 ACS880-07-0169A-3 ACS880-07-0174A-7 ACS880-07-0180A-5 ACS880-07-0206A-3 ACS880-07-0210A-7. ACS880-07-0240A-5 ACS880-07-0240A-5 ACS880-07-0246A-3 ACS880-07-0260A-5 ACS880-07-0271A-7 ACS880-07-0293A-3 ACS880-07-0330A-7 ACS880-07-0361A-5 ACS880-07-0363A-3 ACS880-07-0370A-7 ACS880-07-0414A-5 ACS880-07-0430A-3 ACS880-07-0430A-7 ACS880-07-0460A-5 ACS880-07-0470A-7 ACS880-07-0503A-5 ACS880-07-0505A-3 ACS880-07-0522A-7 ACS880-07-0583A-5 ACS880-07-0585A-3 ACS880-07-0590A-7 ACS880-07-0635A-5 ACS880-07-0650A-3 ACS880-07-0650A-7 ACS880-07-0715A-5 ACS880-07-0470A-7 ACS880-07-0503A-5 ACS880-07-0505A-3 ACS880-07-0522A-7 ACS880-07-0583A-5 ACS880-07-0585A-3 ACS880-07-0590A-7 ACS880-07-0635A-5 ACS880-07-0650A-3 ACS880-07-0650A-7 ACS880-07-0715A-5 ACS880-07-0721A-7 ACS880-07-0725A-3 ACS880-07-0800A-7 ACS880-07-0800A-7+A004 3AUA0000142718 ACS880-07-0820A-3 ACS880-07-0820A-5 ACS880-07-0880A-3 ACS880-07-0880A-5 ACS880-07-0900A-7 ACS880-07-0950A-7+A004 ACS880-07-0990A-3+A004 ACS880-07-0990A-5+A004 ACS880-07-1070A-5 ACS880-07-1140A-3 ACS880-07-1140A-3+A004 ACS880-07-1160A-7 ACS880-07-1160A-7+A004 ACS880-07-1250A-3 ACS880-07-1250A-3+A004 ABB Liquid-cooled drives, ACS880-07LC Series Model List:                          ACS880-07LC-0390A-7 ACS880-07LC-0430A-7 ACS880-07LC-0480A-7ACS880-07LC-0530A-7 ACS880-07LC-0600A-7 ACS880-07LC-0670A-7 ACS880-07LC-0750A-7 ACS880-07LC-0850A-7 ACS880-07LC-1030A-7 ACS880-07LC-1170A-7 ACS880-07LC-4840A-7 ACS880-07LC-0530A-7+A004 ACS880-07LC-0600A-7+A004 ACS880-07LC-0670A-7+A004 ACS880-07LC-0750A-7+A004 ACS880-07LC-0850A-7+A004 ACS880-07LC-1030A-7+A004 ACS880-07LC-1170A-7+A004 ACS880-07LC-1310A-7+A004  ACS880-07LC-1470A-7+A004 ACS880-07LC-1660A-7+A004 ACS880-07LC-1940A-7+A004 ACS880-07LC-2180A-7+A004 ACS880-07LC-2470A-7+A004 ACS880-07LC-2880A-7+A004 ACS880-07LC-3260A-7+A004 ACS880-07LC-3580A-7+A004 ACS880-07LC-4050A-7+A004 ACS880-07LC-4840A-7+A004 ACS880-07LC-5650A-7+A004 ACS880-07LC-6460A-7+A004 ACS880-07LC-5650A-7 ACS880-07LC-6460A-7  

ABB Industrial Drives ACS880-07 ACS880-07LC

Easily solve the problem of unstable voltage in your home.The single-phase voltage stabilizer with PNI SVM1000VA servomotor has been designed to keep the input voltage as stable as possible. When the mains voltage fluctuates, the stabilizer will automatically adjust the voltage as close as possible to the preset value. Servomotor voltage stabilizers have high capacity, high efficiency, no wave distortion, automatic voltage adjustment, long service life and performance. Servomotor voltage stabilizers have a wide range of applications. Depending on their capacity, they can connect: electromechanical equipment, industrial equipment, air conditioners, televisions, appliances, power tools, refrigerators and, in general, electronics that need stable voltage. Principle of operationWhen the unit measuring the input voltage detects a variation outside the preset range, it will send a signal to the control unit which will activate the actuator. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage and will control the output voltage within the preset range. Copper coil: The coil is the basic component of the voltage stabilizer. The single-phase voltage stabilizer with PNI SVM1000VA servomotor uses high quality pure copper. Thus, the coil has a longer service life and a higher efficiency. 3 230V socketsThe two EU sockets on the front panel and the one on the back panel have undergone several connection tests to ensure that your appliances can be used safely. The maximum load supported by the PNI SVM1000VA voltage stabilizer is 800W 3.6A . The 800W 3.6A capacity of the stabilizer allows you to connect most household appliances, including TVs, printers, microwaves, fans and more. Protection functionsThe ventilation holes on both sides effectively disperse the heat generated in the conversion process. If there is an overload or short circuit, the built-in circuit breaker will cut off the power to protect your devices and then resume operation after giving you one minute to reduce the electrical load. Other protections: start delay, mechanical error, overcurrent, short circuit, overtemperature. 

PNI SVM1000VA voltage stabilizer with servomotor, 800W, 3.6A, 230V output

Yusan Industries Limited

 Protection: Safety standard: EN60065, 60950  Safety Certified by UL, C-UL, CE, GS, FCC  High Efficiency, level VI  Low Ripple &amp; Noise  Output over voltage protection  Output over current protection  Over power protection  Short circuit protection on all outputs,automatic recovery function  ESD protection"  Input voltage and current: 100-240VAC, 50/60Hz output voltage and current: 3-12V Output Power:5W  Features:Smart Home Devices Wide range output voltage selection: 3-12V Compact design, with USB jack 100% Burn-In at full rated load MTBF: 100,000 hours 100% Hi-Pot tested Standby consumption less than 0.15W UL Plug  

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?