Guangdong South HongMing (HK) Electronic Science & Technology Co Ltd

 	 Varistor is a sort of sensitive component which resistance value can vary with the applied voltage, it is widely used in the instantaneous overvoltage protection and surge absorption of Electronic-electrical equipment.      Features:     	 Great range of varistor voltage:  18V to 1.8KV  	 Fast response to transient voltage (ns) 	 High great withstanding surge current 	 Excellent non-linearity voltage 	 Symmetric V-I characteristics 	 No following-on current 	 Long life      Range of application:     	 Used in surge protection for IC, transistor, diode semiconductor switch circuit. 	 Used in communication, telemetering, electrical control and various electronic equipment. 	 Suppress the instantaneous overvoltage caused by electromagnetic valve and relay. 	 Supprss the instantaneous overvoltage caused by power supply. 	 Suppress the instantaneous overvoltage caused by electronic circuits 	 Lightning protection for various kind of electronic appliances.      Technical conditions:&nbsp;     	 Carry our standard of GB/T10193, GB/T10194, GB/T10195-1997 and SJ/T10348-10349. 	 Measurement conditions For varistors of 05D, 07D, 10D, 14D, 20D Series, voltage across the varistor measured under 1 m A DC. 	 Varistor voltage: The voltage between two terminals with the specified measuring current applied is expressed by letter V. 	 Maximum continuous operating voltage: The maximum sinusoidal RMS voltage or maximum DC voltage that can be applied continuously in the specified environmental temperature range. 	 Working ambient temperature: -40C ~ +85C&nbsp; 	 Storage temperature range: -40C ~ +125C  

Zhangzhou Eastern Intelligent Meter Co Ltd

Specification
Frequency Range: 100Hz~10kHz
Input Impedance : &gt;15M&Omega;
Ambient Noise Permitted : 100dB
Working Temperature : -10℃~55℃
Power Supply : 9V(6F22)battery
Size : 32 x 50 x 206mm(main part)
Weight : about 240g(long probe+main part)

Electronic Stethoscope

Introduction
This instrument is designed to identify and trace wires or cables without damaging the insulation. You can also use it in checking for short circuit and locating open circuit and so on. There are a Sender and a Receiver included in the instrument.

Operation Introduction

Can Products Co Ltd

 New design bass rocker can easily sync with the audio bass tones of movie or game to creat an even more realistic and sensational whole-body experience. Truly immerse youself in your chosen entertainment.&nbsp; 

- Size :&nbsp;138 x 138 x 62mm
- Impedance :&nbsp;4 ohm
- Frequency Response :&nbsp;35 - 300Hz
- Handling Power :&nbsp;50W
- Housing :&nbsp;Aluminum Die Cast





&nbsp;

5.4" Vibration Feedback Electric Bass Rocker

Introduction
This unit is an advanced detector. It can detect and locate metal, AC voltage and stud. In addition, it incorporates a measure tape.&nbsp; It can be used in construction, fitment, etc.
&nbsp;
Key Features
1. Find the stud center
2. Find wood and metal studs
3. AC scanning to trace hot wire
4. Metal scanning for finding nail, pipe, rebar, and other hidden metallic object.
5. Measure tape function
6. Auto power off
&nbsp;
Specifications
Detection depth:
Stud mode: Wood stud of 30 x 30mm : &le;14mm
Metal mode: Iron pipe of &Phi;20mm: &le;25mm
Voltage mode: Typical depth of 50mm for 90~250V at 50~60 Hz.
Operation condition: -7~40℃ below 75% RH
Storage condition: -20~50℃ below 85% RH
Battery: 6F22,9V
Dimension: 180(L) x 73(W) x 32(T)mm
Weight: about 213g ( including battery)

4IN1 Multifunction Detector

ONLINESHOP SRL

Easily solve the problem of unstable voltage in your home.The single-phase voltage stabilizer with PNI SVM1000VA servomotor has been designed to keep the input voltage as stable as possible. When the mains voltage fluctuates, the stabilizer will automatically adjust the voltage as close as possible to the preset value. Servomotor voltage stabilizers have high capacity, high efficiency, no wave distortion, automatic voltage adjustment, long service life and performance. Servomotor voltage stabilizers have a wide range of applications. Depending on their capacity, they can connect: electromechanical equipment, industrial equipment, air conditioners, televisions, appliances, power tools, refrigerators and, in general, electronics that need stable voltage. Principle of operationWhen the unit measuring the input voltage detects a variation outside the preset range, it will send a signal to the control unit which will activate the actuator. The secondary voltage transformer will change the polarity and magnitude of the compensation voltage and will control the output voltage within the preset range. Copper coil: The coil is the basic component of the voltage stabilizer. The single-phase voltage stabilizer with PNI SVM1000VA servomotor uses high quality pure copper. Thus, the coil has a longer service life and a higher efficiency. 3 230V socketsThe two EU sockets on the front panel and the one on the back panel have undergone several connection tests to ensure that your appliances can be used safely. The maximum load supported by the PNI SVM1000VA voltage stabilizer is 800W 3.6A . The 800W 3.6A capacity of the stabilizer allows you to connect most household appliances, including TVs, printers, microwaves, fans and more. Protection functionsThe ventilation holes on both sides effectively disperse the heat generated in the conversion process. If there is an overload or short circuit, the built-in circuit breaker will cut off the power to protect your devices and then resume operation after giving you one minute to reduce the electrical load. Other protections: start delay, mechanical error, overcurrent, short circuit, overtemperature. 

PNI SVM1000VA voltage stabilizer with servomotor, 800W, 3.6A, 230V output

WK Electrical Accessories Ltd

 	 Easy to fit 	 Flush to wall 	 144mm x 144mm x 2mm 	 Material: ABS 	 Colour: White  

Blank Finger Plate

Meet (China) Ltd

 MS-148(30)VC&nbsp; (Cable &amp; Wire tracer ) Features :   	 CAT IV 1000V 	 NCV, Non-contact AC voltage detection 	 NCC, Non-Contact AC current detection, detect even through concrete walls, shielded / armored cable 	 Cable &amp; Wire tracer 	 Six LED indication for sensitivity level 	 Vibration feedback 	 Auto sensitivity 	 Auto / Rel. calibration 	 Precisely locate cable + wire 	 Super bright white LED torch 	 Low battery indication (2.6V approx.)   MS-783A (Transmitter) Features :  	 CAT II 300V 	 Transmit AC signal through concrete walls; shielded / armored cable 	 Internal fuse protection 	 Dual lamp indication  
&nbsp;

AC Detector with Cable & Pipe Tracer Kit Set

Low Battery Indication : The buzzer doesnt sound and the three LEDs&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; flash at the same time
Power Supply : 9V battery (6F22 or equivalent), or external power source&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;of dc 9V
Working Temperature : 0℃~50℃, relative humidity&lt;75％
Storage Temperature : -10℃~60℃, relative humidity&lt;85％
Size : Display unit : 185X61X31mm
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Sensor unit : 82X61X37mm
Weight : About 180g(without battery)

Car Park Indicator

Saicome Industries Ltd

Cordless &amp; Rechargeable Electric Appliances Manufacturer 

Saicome Industries Limited

 	 Designed in UK 	 Displays PFC/ PSC at same time as Loop reading 	 250/ 500/ 1000V insulation test with auto discharge 	 Test leads auto-null for continuity mode 	 RCD auto test mode for 30mA RCDs 	 RCD ramp test function 	 End of line calibration certificate included 	 Hand-free mode controlled by separate button 	 Single rotary dial for function selection 	 Mains polarity test 	 Colour coded lead set with clips and prodes 	 Battery powered: 4XAA (R06/ LR06)  

Professional Multifunction 5 in 1 Tester

- Up to 100MHz bandwith, and max 1GS/s real-time sample rate
- 2/4 channels
- Max 10M record length
- Friendly UI : FFT or X-Y and waveform
- 2 views displayed on the same screen&nbsp;
- Multi-trigger option :
&nbsp; &nbsp;edge, video, slope, pulse and alternate
- USB isolation - less signal interference, more PC protection
- USB bus powering, and LAN remote control (optional)
- Ultra-thin body design, easy portability
- SCPI supported
- LabVIEW supported&nbsp;&nbsp;

VDS series PC Oscilloscope

Introduction
This thermometer is a hand-held, professional non-contact infrared thermometer. It is easy to use and features durable construction, high accuracy, wide measurement range, laser sighting, backlight, MAX/MIN/DIF/AVG temperature display, data hold, high and low alarm, adjustable emissivity, and automatic power-off.
&nbsp;
Specifications
Temperature Range:&nbsp; -50℃ to 1350℃ ( - 58℉ to 2462℉ )
Response Time:&nbsp; &lt; 1 sec
Spectral Response:&nbsp;&nbsp; 8&mu;m to 14&mu;m
Emissivity:&nbsp;&nbsp; Adjustable from 0.1 to 1.0 ( 0.95 default value )
Operating Environment:&nbsp;
&nbsp;&nbsp; Temperature:&nbsp; 0℃ to 40℃
&nbsp;&nbsp; Relative humidity:&nbsp; 10% to 95% RH, noncondensing @ up to 30℃
Storage Temperature:&nbsp;&nbsp; -20℃ to 50℃
Weight:&nbsp; about 325g ( including battery )
Size:&nbsp;&nbsp; 207 X 195 X 52mm
Battery:&nbsp; 9V battery, 6F22 or equivalent, 1 piece
Distance to Spot Ratio:&nbsp; 12 : 1

Non-contact Infrared Thermometer

Avantec Mfg Ltd

Feature ListPower Supply: 24VAC or 24VDC Modbus communication with 1 jumper setting for end-of-line and 2 jumper settings for bias DIP switch digit 8 selects baud rate 9600/19200 bps. Auto-search feature removed. DIP switch selects 0-127 slave address for Modbus All parameters can be monitored and adjusted through Modbus Designed for Din-rail installation Unpluggable Terminal Blocks  OPERATING SPECIFICATIONS Supply Voltage:             24VAC+/-15% or 24VDC +/-15% Power Consumption:          (TBA) Operating Temperature:        0 – 50 ºC Storage Temperature:         -10 – 60 ºC Operating Humidity Range:     5 – 95 %RH non-condensing Terminal Block:             26-14 AWG wire   

Modbus I/O Module LN820MOD

Alarm : &gt;80dB
Low battery indication : the unit sounds when there is no leak detected.
Operating temperature : -10℃~40℃
Storage temperature : -20℃~60℃
Battery : 12V,23A or equivalent, one piece
Size : 82mmX80mmX28.5mm
Weight : about 68g( including battery )

Water Leak Alarm

JJ Electronics Assembly Company

 Features:  	 Latest Technology COMOS Quartz 8 Bits Micro-Controller 	 Digital electronics general purpose time switch with daily and weekly programs 	 Repeat programs with 8 ON/OFF locations 	 LED indicate turn on 	 Shortest switching interval 1 minute 	 LCD indication for time-of-day, weekly &amp; switching status 	 NiMH rechargeable button cell back up battery for power reserve more than 200 hours after fully charged. NiMH is an environmental protection free green battery 	 Three ways manual override operating mode for ON/AUTO/OFF by push button 	 Simple and easy to program and operating by multi-function keys 	 Easy installation for DIN rail application 	 Protected with transparent front cover 	 Designed for full module of 35mm size 	 Safety Covers to cover terminals   Specification:  	 Input range: 220-250VAC or 110-125VAC 50/60Hz 	 Output: Resistive Load: 16AMPS@250VAC Max. 3,680 WATTS 	 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Inductive Load: &nbsp; 8AMPS@250VAC 	 Back Up Battery: 2.4VAC NiMH rechargeable battery 	 Battery life cycle: 1000 times from empty to fully charge 	 Battery reserve time: More than 200 hours after fully charge 	 Approval: CE, EMC, LVD  

DIN Rail Electronic Programmable Timer

Shenzhen Rengang ELectronics Co.,Ltd.

Product DescriptionDC Axial Cooling Fan , 200*200*60mm Fan With Aluminum Frame What are axial fans used for?In general, an axial-flow fan is suitable for a larger flow rate with a relatively small pressure gain and a centrifugal fan for a comparatively smaller flow rate and a large pressure rise. They are used to supply fresh air, suck air from return air trenches, suck air from rotary filters, exhaust air out, etc.  Optional Function  1. Waterproof Level: IPX5~IP68, fans could be working in a wet environment, outdoor, or underwater with waterproof protection. 2. Wire leading: 2 wires(red wire:positive;black wire:negative) 3 wires(red :positive;black :negative;yellow: PWM) 4 wires(red :positive;black :negative;Yellow :PWM;white:FG) 3. Additional function: auto-restart, temperature control speed, speed detection, stoppage alarm, waterproof, etc. 4. We default 220mm wire length without connector, which could be customized as your request. we just need the picture of the connector and rank of wires to confirm. 

DC Axial Cooling Fan , 200*200*60mm Fan With Aluminum Frame

Sun Yin Crystal Industry Co Ltd

This component is made of sapphire crystal glass which has a hardness that ranks nine out of ten in the Mohs scale, making it the hardest material second to diamond. It is also designed to be anti-impact, anti-scratch. The sapphire crystal glass is skillfully crafted to ensure high quality and is great for repairs and replacements of machinery. Sapphire crystal glassElectronic useElectronic componentElectronic glassHigh quality &amp; craftsmanshipAvailable custom design &amp; drawingAvailable any coating &amp; metallizationVicker hardness: 2000 - 2500 daN / mm2Tensile strength: 26 daN / mm2Flexural strength: 35 - 39 daN / mm2Welcome inquiry for any drawing &amp; details

Sapphire Glass Electronic Used Component

Zero New Materials (Hong Kong) Co., Limited

TGGT series thermally conductive silicone gel is a two-component flexible silicone with low stress and high thermal conductivity. It is often used to fill the gaps of heating components to eliminate component assembly tolerances. At the same time, because it is vulcanized after automatic dispensing and assembly, it effectively reduces the stress damage to components. The cured thermally conductive silicone gel has similar properties to the thermally conductive pad, has excellent high temperature resistance and aging resistance, and can work for a long time at -40~200℃. Product Description TGGT series thermally conductive silicone gel is a two-component flexible silicone with low stress and high thermal conductivity. It is often used to fill the gaps of heating components to eliminate component assembly tolerances. At the same time, because it is vulcanized after automatic dispensing and assembly, it effectively reduces the stress damage to components. The cured thermally conductive silicone gel has similar properties to the thermally conductive pad, has excellent high temperature resistance and aging resistance, and can work for a long time at -40~200℃.  Features and Advantages: 1、Thermal conductivity 1.0-3.0W/( m·K) 2、Low compression force application, adjustable curing time 3、Easy to dispense with low viscosity 4、Excellent temperature resistance and chemical resistance 5、Excellent electrical insulation  Applications: Encapsulation of power module Protection and packaging of electronic components and parts communication equipment, cooling module of computers Memory modules, power semiconductors New energy vehicle, between battery pack and liquid-cooling plate  Specifications: Barreled: 20KG (A and B glue will be packed separately) and can also be customized according to customer requirements.  Basic Physical Properties: basic physical properties Model test method GGT-10 GGT-15 GGT-20 GGT-30 before curing Appearance A yellow black grey blue visual B white white white white visual Viscosity(Pa·s) A 100 250 350 400 ASTMD2196 B 100 250 350 400 ASTMD2196 Mixing ratio(A:B) 1:1 / operating time(h) 1～2 / after curing Dielectric strength(KV/mm) ≥7 ASTM  D149 Dielectric constant(@1MHz) ≤4 ASTM  D150 Dielectric loss(@1MHz) 0.01 ASTM  D150 Volume resistivity(Ω·cm) 1.0×1013 ASTM  D257 RoHS Compliant PASS / Hardness (Shore 00) 50 50 50 50 ASTM D2240 Density (g/cm3) 2.0 2.3 2.5 3.0 ASTM D792 Flame retardant rating V-0 V-0 V-0 V-0 UL94 Thermal conductivity(W/m·K) 1.0 1.5 2.0 3.0 ASTM D5470   

thermally conductive silica gel

Ming's Hardware Co Ltd

These are spare parts made for application to electronics and electrical products. The metal parts are carefully constructed to offer a long lifespan. The metal part is a crucial part of various electronics and electrical appliances. 	 Material: metal. 	 Round shape. 	 Pointed tip. 	 With screw threads on one end. 	 Durable construction. 	 Offer a long lifespan. 	 Applicable to electronics and electrical products.  

Electrical Component

Luen Yick Electrical Mfg Co Ltd

- Comply to EN60998-1, EN60998-2-1 standards - Zinc-plated steel cage terminal - Ambient temperature : T85-110 oC - Housing made from Polypropylene (V-2 grade) or available for Polyamide 66 material - Colour in white or black - T04S :24A, wiring capacity Max. 4.0mm2; T06S : 32A, wiring capacity Max. 6.0mm2; T10S : 57A, wiring capacity Max. 10mm2; T16S : 76A, wiring capacity Max. 16mm2; T25S : 101A, wiring capacity Max. 25mm2 - Price for online purchase is for T04S  #electrical, #electrical parts, #terminal block, #12 way, #kengo, #wiring, #connection, #lighting accessories &amp; parts 

12 Way 450V Terminal Blocks - Steel Cage

 FAQ1. Q: Are you a factory or trading company?A: We are a factory.2. Q: How many workers do you have? What is your monthly capacity?A: Generally we have 800 workers in our factory with 5 production lines. In peak season, we have more than 120 workers. Our monthly capacity is 1.3 million per month.3. Q: What is your factory located? How can I visit there?A: Our factory is located in Shenzhen city, Guangdong Province, China, about 30 mins far away from Shenzhen airport by car. Warmly welcome visit our factory.4. Q: Can you make the fan with our company's logo?A: Yes. Usually speaking, if the quantity reached 2000 pieces we can do that.5.Q: How can I get samples? What is the delivery time of mass production?A: 1). Samples can be delivered by courier like FedEx, EMS, DHL, TNT, etc within 1-5 days after receiving payment.2). For mass production, delivery time is about 7-15 days after receiving deposit or full payment. 

3010 DC Cooling Fan 30x30x10mm 5v/12v

These are spare parts designed for electronics and electrical products. The parts are sturdily constructed and are durable. These electrical parts guarantee performance and stability of the electronics or electrical products applied. 	 Material: metal. 	 Square shape. 	 Round holes in the corners. 	 Round tube in the middle. 	 Sturdily constructed. 	 Long service life. 	 Guaranteeing performance and stability. 	 Designed for electronics and electrical products.  

These are replacement parts carefully designed to be applied to a variety of electronic devices and electrical appliances. The parts are sturdily molded for an extended lifespan. These metal parts make sure the electronic or electrical products provide high performance and stability. 	 Material: metal. 	 Round shape. 	 With threaded holes. 	 Long life expectancy. 	 Sturdily molded for an extended lifespan. 	 High performance and stability. 	 Applicable to a variety of electronic devices and electrical appliances.  

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?