Advance Label Ltd

A variety of high quality labels for electronic products, home appliances, consumer electronic products, etc.Long lasting and high temperature enduring.UL / CSA approved label.Security or barcode label.Support serial numbers and variable data printing.Customized materials, size, design contents.OEM &amp; ODM orders are welcome.

Electronic Product Label

Lisun Group (Hong Kong) Limited

1. RoHS Compliance Testing:•RoHS testing of electronic appliances•Alloy manufacturing RoHS test•RoHS testing of coating and plating•RoHS testing of plastics and plastic parts•Various hazardous element testing area 2. Product Instruction | What RoHS means?EDX-2A RoHS is a mandatory standard established by EU legislation. Its full name is “Restriction of Hazardous Substances” (Restriction of Hazardous Substances). This standard has been formally implemented since July 1, 2006 which is mainly used to regulate the materials and process standards of electrical and electronic products. And making it more conducive to human health and environmental protection. The purpose of this standard is to eliminate six items of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers in electrical and electronic products, and stipulate that the content of lead should not exceed 0.1%. The new directive 2011/65/EU (RoHS 2.0) to replace the 2002/95/EC (RoHS) new directive will take effect on July 21, 2011. Comparing RoHS2.0 and RoHS, the main changes are as follows:•Add Appendix I and IA of the original WEEE Directive as two appendices of RoHS.•From 1st,January, 2014 to 1st, January, 2017, medical equipment and monitoring equipment will be gradually included in the scope of RoHS control.•Manufacturers need to make an EC declaration of conformity and affix the CE mark before the product goes on sale. After the sub-electrical products on sale in market, relevant technical documents and EC declarations of conformity must be retained for at least ten years.•If the substances listed in Appendix III (such as HBCDD, DEHP, BBP, DBP, etc.) cause the human health and the environmental unacceptable harzards, it will be evaluated in accordance with the provisions of Articles 69 to 72 of the REACH Regulation, and this substance will be further included in the restricted substances in Appendix IV. The main test substances in RoHS requirements are as follows: Limit substance Limit content Hg 1000ppm CrVI 1000ppm Cd 100ppm Pb 1000ppm PBBs 1000ppm PBDEs 1000ppm 

RoHS Testing Equipment (EDXRF)

Superior Pulp Mould Ltd

Electronics Products

ESD simulator guns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. What is a ESD test?The static electricity generated by the human body to the object or between two objects may cause the electrical and electronic equipment circuits to malfunction or even be damaged. The ESD generator is designed for the withstanding ESD performance measurement for the assessment of electrical and electronic equipment. ESD61000-2/ESD61000-2A has a LCD touch screen in both English and Chinese. What is an esd simulator gun used for?Electrostatic discharge simulator is highest electrostatic voltage can be up to 30 kv, which is enough to cover the most severe standard grade of electrostatic voltage requirement (the voltage requirements of the grade 4 air discharge electrostatic is 15 KV). The ESD test gun can be used for the most of electrical and electronic equipment for electrostatic discharge test, and also can ensure comparability and reproducibility of test. Specifications: Product ModelESD61000-2ESD61000-2AOutput Voltage0.1~20kV±5%0.1~30kV±5%PolarityPositive/NegativePositive/NegativeEnergy Storage Capacitance150pF±10% (Replaceable)150pF±10% (Replaceable)Discharge Resistor330Ω±5% (Replaceable)330Ω±5% (Replaceable)Current Rise Time0.6~1ns0.6~1nsTesting FunctionsSingle, Count, 20pps, Air, Contact, IEC levelSingle, Count, 20pps, Air, Contact, IEC levelTrigger ModeMANUAL/AUTOMANUAL/AUTONumber of Discharge1~99991~9999Repetition0.05s~99.99s0.05s~99.99sWorking PowerAC220V (Option 110V) ±10%, 50/60HzAC220V (Option 110V) ±10%, 50/60HzCalibrate Report: Output Voltage (kV)First Peak Current (A)Current at 30ns (A)Current at 60ns (A)Rise Time (ns)27.294.102.200.93415.407.904.300.97623.2012.106.500.97829.4016.209.300.89-27.393.502.300.92-415.507.704.300.89-623.4011.906.300.90-831.8016.108.200.90Suggestions 1:We suggest to choose LISUN ESD-DESK ESD Gun Test Desk which is fully meet IEC/EN61000-4-2 and GB/T17626.2 to work with ESD61000-2 electrostatic discharge gun, the ESD-DESK already includes the following accessories: Test table, reference metal grounding plate, vertical coupling plate, horizontal coupling plate, insulating pad and 470K resistance cable. Suggestions 2:We suggest to choose LISUN ESD-CALA ESD Gun Calibrate Set which is fully meet IEC/EN61000-4-2 Ed2.0 and GB/T17626.2 to work with ESD61000-2 electrostatic discharge gun. The ESD-CALA includes the followings accessories: ESD Gun target mounting plate, ESD Gun calibration target, 20dB attenuator and cable for connecting oscilloscope and gun target.  

Electrostatic Discharge Simulator

Prosoyo Technology Ltd

4.2 inches Electronic Shelf Label E-paper, Electronic Shelf Label Demo Kit 	 A mobile APP, change and monitor labels and more - with no need for software, severs, base station and PDA. 	 Easily assign / unassign labels in-aisle using a mobile APP. 	 A truly enterprise-class solution using only a single APP, offering the lowest total cost of ownership (TCO ) of any electronic shelf label vendor.  Bluetooth ESL Features : 	 No base station, no system, support mobile APP update.&nbsp; 	 Connection via scanning code, read and refresh immediately. 	 Multiple templates available. 	 Dotted electronic paper screen, wide viewing angle. 	 4 years battery life, battery can be replaced. 	 Use anytime, anywhere, no need to set up a limited installation environment. 	 Lowest cost installation and maintenance. 	 Reliability: Automates price update, self-monitoring operation of ESL in real time,&nbsp; high security encryption wireless protocol and the battery life lasts for four years or more. 	 Easy to use: Change prices of product in a few key strokes and price updates immediately, ESL display never goes down, continuous operation even when battery is out, extremely easy to install. 	 Simple, powerful :&nbsp; A mobile APP, change and monitor labels and more - with no need for software, severs, base station and PDA. 	 Lowest TCO :&nbsp; A truly enterprise -class solution using only a single APP, offering the lowest total cost of ownership (TCO ) of any electronic shelf label vendor.  

4.2 inches Electronic Shelf Label Demo Kit

IK01-06 Spring Impact Hammer is used to simulate the mechanical impact that the tested product may encounter in normal use, so as to check the ability of the tested product shell to withstand mechanical impact. It is suitable for mechanical strength test of enclosures, operating levers, handles, knobs, indicator lights, signal lights and lamp shades of accessories such as household and similar lighting fixtures, household appliances, and electronic products to ensure that the tested products can withstand possible reckless operations. and other accidents, so that the tested product can operate normally and safely and reliably. IK01-06 Spring Impact Hammer meet the following standards: IEC60068-2-75 “Environmental testing – Part 2-75: Tests – Test Eh: Hammer tests” &lt;Clauss 6 Test Ehb: Spring hammer&gt;, IEC60598-1, IEC/EN61010-1, IEC60065, IEC60320-1, IEC60335-1, IEC60400, IEC/EN60601-1, IEC60519-1, IEC/EN61058- 1, UL1244, EN60400, EN60730-1, GB/T2423.55, GB7000.1, GB4706.1, GB2099.1, GB/T8898. IK ratings are defined as IKXX. The “XX“ is a number from 00 to 07 indicating the degrees of protection provided by enclosures (including luminaires) against external mechanical impacts. The different IK ratings relate to the ability of an enclosure to resist impact energy levels measured in joules (J). IEC62262 specifies how the enclosure must be mounted for testing, the atmospheric conditions required, the quantity and distribution of the test impacts and the impact hammer to be used for each level of IK rating. Degrees of protection against external mechanical impacts: IK01IK02IK03IK04IK05IK06IK070.14J0.2J0.35J0.5J0.7J1J2JLISUN offers two types of IK spring impact hammers:• Single Type (one spring impact hammer for each IK level): IK01, IK02, IK03, IK04 , IK05, IK06, IK07• Universal Type (The six IK grades are concentrated into an adjustable spring impact hammer): IK01-06 

Spring Impact Hammer IK Level Tester IEC 60068-2-75

Joinmax Digital Technology Ltd

AIpha B Set is an additional set of Alpha A Set, equipped with more sensors and command cards, which enriches the gameplay and programming functions of the set. The set also adopts physical programming method, making.children to realize programming ideas without using computers and other electronic equipment. At this stage, the addition of ultrasonic sensor,MIC sensor,Tilt sensor, and Potentiometer sensor can realize the interaction between the environment and machines, and between humans and machines. There are more than 350pieces of building blocks in the set, which allows students to build multiple robot cases with different shapes andf unctions. Note: "Alpha B Set" cannot be used alone, it needs to be used together with "Alpha SetA ". more: http://www.stemtown.com/products/post.asp?pid=80 

ZMROBO DIY STEM Education robot Card Coding Programming in School for Children Learning Building Assemble Plastic Blocks and Sensors

The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) &lt; Basic testing methods of Glow wire, basic testing methods of Glow wire device&gt;, UL 746A, IEC829, DIN695 and VDE0471. What is glow wire test?The Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. It uses high-temperature coating spraying on steel structure and imported instrument display, with easy operation and stable performance. The glow wire testing equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises. Specifications:• Heating temperature: adjustable continuously within the range of ≤500-1000°C, the accuracy of temperature is 1°C, the resolution of temperature is ±3°C• Glow-wire time: 0.1-999.9s，±0.1S(time range is adjustable)• Ignition time: 0.1-999.9s, auto record, manual pause• Flame-out time: 0.1-999.9s (auto record and manual pause)• Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm• Glow wire: φ4 nickel (80％) and chromium (20％) Made in specific dimensions.• Thermocouple: φ0.5 armored nickel &amp; chromium/nickel-chromium wire, K Type.• Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. To save the delivery cost for the oversea market, LISUN designed a compact version glow-wire tester weighing less than 50kg. (Customer need to prepare additional ventilation system for ZRS-3HS). What is glow wire capable?The glow wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such as hot components or overload resistors in a short period of time. It is one of the series of electrical and electronic components fire hazard test instruments. It is suitable for evaluating the flammability test and light-off temperature test of electrical equipment and its components and parts, as well as solid electrical insulating materials or other solid flammable materials. LISUN ZRS-3H Glow-wire Test Apparatus – After Sales Questions and Answers.LISUN ZRS-3H Glow-wire Test Apparatus were in the market for more than 10 years, LISUN engineers service team already summary the most of the After Sales Questions and Answers in the above link. Please read it carefuly, you can solve the most of the problems by yourself if you have some questions while using the instruments. LISUN will be continue to update this pages and more FAQ can be found in this topic link.  

Glow-wire Test Apparatus

ATC Corporation Limited

Type C Port + Quick Charge 3.0 portSpecially design for charging Airpod and you can also charge other devicesType C with PD 18W functionLED Power consumption indicatorCapacity: 10,000mAhOver-heating protectionOver-current protectionShort-circuit protection 

2 in 1 Power Bank for Airpod Gen 1 & 2

JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical &amp; electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades. The whole JL-X waterproof test system includes:•Drip Box (JL-12): The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x45mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. The sample can be over 150kg.•Swing Pipe Water Spray Test Equipment (JL-34): It is for IPX3 and IPX4 waterproof test. The semi-diameter of swing pipe is 1meter (Any other size is also available). The internal diameter of the swing pipe is 15mm. The sample rotating table diameter is 1000mm (Or other size according to the diameter of the swing pipe), and the height is adjustable. The rotation speed is 1~5rpm which is controlled by PLC panel.•Waterproof Jet Test Device (JL-56): With water supply device size is 780*580*1100mm, the nozzle diameter is ф6.3mm (IPX5 waterproof test ) and ф12.5mm (IPX6 waterproof test). The water flow is 12.5 ±0.625L/min for IPX5 and 100 ±5L/min for IPX6•Immersion tank Waterproof test Device (JL-7): It is for IPX7 waterproof test. The water tank size is 1000x1000x1200mm (Other size can be designed according to your request). It can test samples up to 120kg.•Immersion tank Waterproof test Device (JL-8): It is for IPX8 test. It can simulate a water depth of 0~50m. The water immersion tank diameter is 600mm and the height is 1200mm. The compressive stress is 10 atmospheres or design according to customer‘s request. 

IP Waterproof Test Equipment

Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. The salt fog test chamber meets the following standards: IEC60068-2-11 (GB/T2423.17), GB/T10125, GB/T1771, ISO9227, ASTM-B117, GB/T2423-18, QBT3826, QBT3827, IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, GJB150, DIN50021-75, ISO3768, 3769, 3770; CNS 3627, 3885, 4159, 7669 etc. ModelWork Room Size (mm)Exterior Size (mm)VoltagePower (KW)YWX/Q-150600x450x4001100x750x9301Phase/220V2YWX/Q-250900x600x5001500x900x11501Phase/220V2.5YWX/Q-7501100x750x5001700x1050x11501Phase/220V3.5YWX/Q-0101200x800x5001800x1100x12001Phase/220V3.5YWX/Q-0161600x1000x6002300x1300x13001Phase/220V5YWX/Q-0202000x1000x6002700x1400x15003Phase/380V7.5Specifications:• A waterproof structure is adopted between the chamber cover and chamber body, thus there is no salt spray overflow.• Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.• TheSalt Spray Chamber Working room temperature range：RT＋5℃~50℃ (The setting value cannot be lower than the current ambient temperature); Saturated barrel temperature: +40°C~+63°C;• Brine temperature: preheated by laboratory temperature; Temperature uniformity: ≤ ±2°C; Temperature fluctuation: ≤ ±1°C;• The Salt Spray Test time: 0-99,999m (adjustable); Settlement: 1-2ml/80cm²/h;• The Salt Spray Test Chamber Spray method: NSS (neutral) test, AASS (acidic) test, CASS (copper acceleration) test, custom test, programmable test, each test can choose continuous spray or intermittent spray (according to industry standards). The ratio of each test solution has a corresponding explanation in the test setting interface.• Sample holder: at an angle of 15 to 30 degrees from the vertical surface (with sample standard placed). Other irregular samples are recommended to remain tilted. The V-groove has a single weighing capacity of 3KG, and the O-bar has a single bearing capacity of 5KG. It is strictly forbidden to place samples under heavy weight. How do you do a salt spray test?1. First power on thesalt spray test chamber (plug in)2. Press the red power switch panel from left to right, respectively: the low water level A light is on, the low salt water B light is on, and the low water level C light is on.3. Pour distilled water directly into the test chamber, wait until the water level A indicator light off, and stop adding water. […more…] 

Salt Spray Test | Salt Spray Test Chamber manufacture

Shenzhen Weichengwang Packaging Co.,Ltd

 	 Product Material:&nbsp;Paper &amp; Paperboard 	 Paper Type:&nbsp;Art Paper, Cardboard, Coated Paper, Duplex Board, Fancy Paper, Kraft Paper, Newsprint Paper, Offset paper 	 Product Type:&nbsp;Brochure 	 Binding:&nbsp;Perfect Binding 	 Surface Finish:&nbsp;matt lamination 	 Printing Type:&nbsp;Offset Printing 	 Place of Origin:&nbsp;Guangdong, China (Mainland) 	 Brand Name:&nbsp;VVE 	 Model Number:&nbsp;VVE-W110 	 Item Name:&nbsp;Factory introduce perfect binding brochure with offset printing 	 Color:&nbsp;CMYK 	 Surface finishing:&nbsp;matt lamination 	 MOQ:&nbsp;200 pcs 	 Size:&nbsp;A4/A5/A6/Customized 	 Sample lead time:&nbsp;about 3 days 	 Brand:&nbsp;OEM and ODM are Available 	 Transport Method:&nbsp;Sea, Air or Express 	 Certificate:&nbsp;SGS ROSH 	 Delivery Time:&nbsp;About 7 days  

Kraft Brown Gift Box For Electronic Products

AC Electronic Ltd

Electronic Hook Switch Cable for remote desk phone call control (answer/end). This cable eliminates the need for a HL10 Handset Lifter. This cable works with Avaya desk phones and may work with additional manufacturers, check with our Product Configurator for more information. Replacement Note: The APV-63 EHS cable replaces the APV-62 cable and features compatibility with the Plantronics On-line Indicator accessory. 

Plantronics APV-63 Electronic Hook Switch Adapter for Avaya

Shibakawa (Hong Kong) Ltd

We have moulding machine production lines in Zhuhai city China and Thailand factories. They can be utilized for moulding injection for different business market products, such as electronic of home appliance, computer, hot water machine, automatic water tap, communication product, OA machine, CCTV, automotive, etc.  Additionally, we can play an OEM role by producing a tooling (Mould) if necessary, as we have tooling (Mould) department.  Many types of plastic materials are available for opening tooling and moulding injection.  We have a lot of experience of appearance parts that require microscopic surface concavo-convex control, especially from the macroscopic viewpoint, we are able to control a precision of 0.5mm dimensions in +/- is 0.05mm tolerance. The combination of micro and macroscopic control is our core competence of moulding technology. We can also control moulding precision until 0.1mm thickness.  The pictures are for electronic Tobacco or electronic cigarette, It can be used by PLA, PCTG, PETG, PC, PA12, etc. of engineering plastic material with stable thickness until 0.1mm.  We have 30 to 180tons of moulding Machines in China and Thailand factories.  Feature:  It can be moulding injection for different shape of thermoplastic products by tooling (Mould), and equipped with Electric Robot Arm. For different large-scale moulding products, we can independently make different assistant tools. It can be produced high-precision and complex difficult-scale products, and avoid the excellent performance of products with quality deviation and high conformity rate.  If you have any inquires, please contact us. 

OEM Moulding for Electronic Tobacco Filter Cover

Q Q International

Wondfo Sars-CoV-19 antibody test kits is the Leading POCT manufacture of lateral follow method, popular used in hospital , health care centre and school clinic. Easy operation and result come out in 10-15min.&nbsp;

20 individual pouches /box containing: 	 20 test cassettes for 20 people use and desiccant pouch. 	 20 pcs disposal droppers 	 Detection buffer 	 Instruction leaflet in English 4 pages 	 It passes EU DoN, pls check another picture for details.&nbsp;  

Covid-19 Antibody Test Kits 15min Show Outcome 

Quintet Industries Ltd

vEquipped with high precision "strain-guage" sensorvMeasure weightvEasy to read LCD displayvCapacity: 150kg/330lbvGraduation: 0.1kg/0.2lbvAuto-off function / Overload indicationv15mm Bamboo platformvProduct size: 300X300X26mmvDisplay size: 82X31mmvPower: self power generatedvPress button one time is enough for using around 1minutevPacking: Gift box size: 335X58X346mm   Carton size (6pcs/ctn): 407X353X376mm, NW: 15.8kg, GW: 19.2kg vContainer quantity: 20’: 4,960pcs, 40’: 10,500pcs, 40’HQ: 12,000pcs

ECO bathroom scale 

Guangdong South HongMing (HK) Electronic Science & Technology Co Ltd

Metallized Polypropylene Film capacitor High-pressure tolerance, high insulation resistance and low-profile, is suitable for the direct current, impulse and low-power circuits with high temperature.Specification Reference standard : IEC 60384-16, GB 10190Climate category : 40/105/21Rated temperature : 85CelsiusOperation temperature range: -40 ~ 105CelsiusRated voltage : 100Vdc ~ 2000VdcCapacitance range : 0.00047uF ~ 6.8uFCapacitance tolerance : +-5%(J), +-10%(K), +-20%(M) (20Celsius, 1kHz)Voltage proof between terminations : U=1.6UR, 5s (20celsius)Insultation resistance : 100Vdc &lt;=UR&lt;500VdcCR&lt;=0.33uF, IR&gt;=60000MΩ, CR&gt;0.33uF,t&gt;=20000MΩ.uF(20celsius, 100Vdc, 1min)UR&gt;=500VdcCR&lt;=0.33uF , IR&gt;=60000MΩ, CR&gt;0.33uF , t&gt;=20000MΩ.uF(20celsius, 500Vdc, 1min)Dissipation factor:1kHz : &lt;=0.001010kHz : &lt;=0.0020(CR&lt;=1uF) (20celsius)

Metallized Polypropylene Capacitor

2.9 Inch BLE Electronic Shelf Label, Electronic Shelf Label ESL
<ul>
	<li>A mobile APP, change and monitor labels and more - with no need for software, severs, base station and PDA.</li>
	<li>Easily assign /unassign labels in -aisle using a mobile APP.</li>
	<li>A truly enterprise -class solution using only a single APP, offering the lowest total cost of ownership (TCO ) of any electronic shelf label vendor.</li>
</ul>
Bluetooth ESL Features :

<ul>
	<li>No base station, no system, support mobile APP update.&nbsp;</li>
	<li>Connection via scanning code, read and refresh immediately.</li>
	<li>Multiple templates available.</li>
	<li>Dotted electronic paper screen, wide viewing angle.</li>
	<li>4 years battery life, battery can be replaced.</li>
	<li>Use anytime, anywhere, no need to set up a limited installation environment.</li>
	<li>Lowest cost installation and maintenance.</li>
	<li>Reliability: Automates price update, self-monitoring operation of ESL in real time,&nbsp; high security encryption wireless protocol and the battery life lasts for four years or more.</li>
	<li>Easy to use: Change prices of product in a few key strokes and price updates immediately, ESL display never goes down, continuous operation even when battery is out, extremely easy to install.</li>
	<li>Simple, powerful :&nbsp; A mobile APP, change and monitor labels and more - with no need for software, severs, base station and PDA.</li>
	<li>Lowest TCO :&nbsp; A truly enterprise -class solution using only a single APP, offering the lowest total cost of ownership (TCO ) of any electronic shelf label vendor.</li>
</ul>


2.9 inch BLE Electronic Price Tag

EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is made of full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. The EMI Test System EMI-9KB fully meets CISPR15:2018, CISPR16-1, GB17743, FCC, EN55015 and EN55022. System Configurations:• EMI-9KC Test System includes: EMI-9KC EMI Receiver built-in Attenuator (9K-1GHz), LISN-A Artificial Network Power (16A with RS232 communication), CDNE-M316 Coupling/Decoupling Network for Emission, 3pcs isolation transformers and cables.• EMI-9KB Test System includes: EMI-9KB EMI Receiver (9K-300MHz), LISN-A Artificial Network Power (16A), CDNE-M316 Coupling/Decoupling Network for Emission, 3pcs Isolation Transformers, Attenuator and cables.• EMI-9KA Test System includes: EMI-9KA EMI Receiver (9K-30MHz), LISN-A Artificial Network Power (16A), 3pcs Isolation Transformers, Attenuator and cables. Option instruments to work with the EMI-9KC, EMI-9KB and EMI-9KA EMI receivers:• LISUN LSP-500VARC/LSP-1KVARC Pure Sine Wave AC Power Source for EUT• LISUN SDR-2000B Magnetic Shielding Cabinet for the EMI Receiver System• LISUN VVLA-30M Three Loop Antenna to test 9k-30MHz radiation• LISUN AB-CLP Absorbing Clamp to test the home applications &amp; motor tools• LISUN VOL-CP RF Current Probe to the conducted disturbance voltage Specification:• Detection frequency range: 9kHz~1GHz (EMI-9KC), 9kHz~300MHz (EMI-9KB), 9kHz~30MHz (EMI-9KA)• Frequency stability: 1×10^-6• Frequency resolution: (9kHz~150kHz) 30Hz; (150kHz~30MHz) 1kHz• Test Tolerance: ±2 dB• Measure and Detection method: PK, QP and AV• Measure range: 20dBμV~140dBμV• Frequency scanning step frequency: 20Hz~2MHz• Sweep bandwidth: 200Hz; 9kHz; 120kHz• Connect PC via USB cable and software can run on Win7, Win8, Win10, Win11 What is EMI ?EMI (Electromagnetic Interference) is electronic noise that interferes with cable signals and reduces signal integrity. EMI is usually generated by electromagnetic radiation sources such as motors and machines. Electromagnetic Interference has two types: conducted interference and radiated interference. Conducted interference refers to the coupling (interference) of signals on one electrical network to another electrical network through a conductive medium. Radiated interference refers to the interference source coupling (interference) its signal to another electrical network through space. 

EMI Test Receiver

MGM Industries & Company

   Black exterior with contrast panels and buttons.   Easy-to-use buttons to aid smooth operation.   Good quality screen for clear viewing.   Four levels of brightness/contrast.   Four color mode.   Snapshot to bring your object closer.   Magnification can increase up to 15X or 32X.   Smart, compact and easily portable.   Allows user to magnify small objects and keep record of them.   Suitable for outdoor field research or antique studying.  

Digital Magnifier

LS2090 LED Power Driver Test Instrument is the comprehensive test instrument for LED driver power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: input (AC&amp;DC), output (AC&amp;DC), output start (DC), harmonic and displacement factor (DF). The LS2090 usually works with LISUN LSP-500VARC pure sine AC Power Source and LISUN M9822 DC Electronic Load. The LSP 500VARC provides constant adjustable voltage for the driver under test, and the M9822 is used to simulate the LED source. The software can run on Win7, Win8, Win10, Win11. Specification:1. Input Characteristics Test (AC)• Measures the input voltage, current, power, power factor, power frequency• The fundamental frequency scope of the current and voltage: 45Hz~65Hz;Narrowband range: 45Hz~5kHz; Broadband range: 45Hz~1MHz.• Voltage range: 3~300 V (CF=1.67); Current range: 5mA ~ 2.7A (CF=3); Power range: 0.015~800W; Power factor range: 0.000~1.000. 2. Input Characteristics Test (DC)• Measures voltage, current, power.•Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4000W 3. Output Characteristics Test (AC)• Measures lamp voltage, lamp current, lamp power.•Lamp voltage range: 3~300V (CF=3); Lamp current range: 5mA~2.7A(CF=3); Lamp power range: 0.015~800W 4. Output Characteristics Test (DC)• Measures output lamp voltage, lamp current, lamp power, ripple wave current.•Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4KW; Ripple wave current range: 5mA~2.5A. 5. Output Start Characteristics Test (DC)• Changing curve and data of the lamp voltage and lamp current within 0~2 seconds.•Lamp voltage range: 3~500V;Lamp current range: 5mA~8A 6. Harmonic TestingTotal harmonic and the harmonic component of 0~50 times, wave ratio, initial phase angle, peak phase angle and the phase Angle. 7. Displacement Factor (DF) TestingThe LS2090 is an update version for WT2080, the LS2090 has the Displacement Factor (DF) Testing function. P.S. The LS2090-IEC with additional software (need to add extra cost on LS2090) can fully meet EN/IEC6100-3-2:2019. Please click here to see theLS2090-IEC additional Test Report Sample.  

 LED Power Driver Tester

LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table is according to IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 and other relevant standards. • LVD-100KG: Combined the Vertical and Longitudinal total 4 directions in one test table.• LVD-100KG-6D: Combined the Vertical, Level and Longitudinal total 6 directions in one test table. Measurements:Sine Wave, Frequency Modulation, Sweep Frequency, Programmable, Frequency Doubling, Logarithm, High Acceleration speed, Amplitude Modulation, Time Control, Full-function Computer Control, simple and easy to set the acceleration and amplitude. Specifications:• Vibration table size: 500*500mm (Other size can be designed)• Vibration: 0~5mm (Adjustable range P-P). Vibration waveform: sine wave (half wave and full wave). Acceleration speed: 0~20g (Adjustable)• Maximum test load capacity: 100kg• Accuracy: Frequency can be displayed to 0.01 Hz. Precision: 0.1 Hz.• Sweep frequency function (1~600Hz): (Upper frequency, Lower frequency, Time range) It can set real standard arbitrarily to sweep frequency back and forth• Programmable Function (1~600Hz): It can set 15 segments in one test with different parameters (frequency/amplitude/time/acceleration), and it can be recycled• Frequency doubling function (1~600Hz): 15 segments multiplied-increase:1)Low to high frequency2)High to low frequency3)Low to high and then to low frequency, it can be recycled• Logarithmic function (1~600Hz), 3 modes of logarithm/can be recycled:1)Lower to upper frequency2)Upper to lower frequency3)Lower to upper and then to lower frequency• Measuring instrument: To display amplitude, acceleration speed and the maximum acceleration speed Why do we measure vibration?Vibration test is to simulate the various vibration environment impacts encountered by the product in the transportation, installation. This test is to simulate the various impacts encountered by the product in the transportation, installation and use environment. This kind of vibration environmental impact is used to determine whether the product can withstand various environmental vibrations. LISUN LVD-100KG Electrodynamic Vibration Generator System – After Sales Questions and Answers.LISUN LVD-100KG Electrodynamic Vibration Generator System were in the market for more than 10 years, LISUN engineers service team already summary the most of the After Sales Questions and Answers in the above link. Please read it carefully, you can solve the most of the problems by yourself if you have some questions while using the instruments. LISUN will be continue to update this pages and more FAQ can be found in this topic link.  

Electrodynamic Vibration Generator System

LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer – Flicker Tester is equipped with Class A fast photometric probe, so the sampling speed is up to 100kHz. It fully meets the requirement of BASIC, Energy Star V2.1, IEC TR 61547-1:2020 IEC-Pst, CA CEC, ASSIST, CIE TN006-2016 CIE SVM, IEEE Std 1789 standards, etc. It is professional for flicker test of LED lights and lamps, energy-saving lamps, etc. According to EU directives 1194/2012, 2009/125 / EC, SASO2902, COMMISSION DELEGATED REGULATION (EU) 2019/2015, COMMISSION REGULATION (EU) 2019/2020 and IEC60969 “Self-ballasted Lamps for General Lighting Services—Performance Requirements” and other requirements. 1. Lamp Flicker test interface needs to work with LISUN Integrating Sphere, DC Power Source and Standard Light Source, it also can be added in LISUN LPCE-2 /LPCE-3 Integrating Sphere System or LSG-6000/LSG-1890B/LSG-1800A Goniophotometer or LSG-6000CCD/LSG-1890BCCD/LSG-1800ACCD Goniospectroradiometer, please click here to see the Lamp Flicker Test Report Sample: 2. Lamp Start and Run-up Test: Please click here to see the Lamp Start and Run-up Test Report Sample. The LSRF-3 needs to work with LISUN’s LSP-500VARC AC Power Source (With Trigger Function) or LSP-500VARC-Pst (IEC-Pst AC Power Source) to test the Start and Run-up time of lamps which is according to clause 11.4 Start Time Test Method &amp; clause 11.5 Run-Up Time Test Method in the US Standards of Energy Star V2.1,and SASO2902 Table 13: 3. According to IEC TR 61547-1:2020, The LSRF-3 do the Light Pst V measure on AC Stable as below Figure 1a , and also can do the Light Pst LM(I) measure on AC Fluctuation as below Figure 1b. Note: The Light Pst LM(I) measurements need to work with LISUN’s LSP-500VARC-Pst (IEC-Pst AC Power Source)   

Lamp Start, Run-up Time and Flicker Test System

Astrotech International Ltd

Custom LCD Display Module, LCM, TFT, Custom OLED Display LCD/LCM/TFT/OEM/ODM, Custom/Semi-custom/Wide Temp Display Applications: Industrial Displays, Automotive Displays, Medical Displays, IOT Displays. Products: Monochrome Display, Colour Display, VATN Display, Touch Display, High Brightness Display, Wide Temp Display Electronic component # Liquid-crystal display 

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?