Xintechnology Electronics Co., Ltd.

Description Xintec's Dual-tech Passive Infrared Detector (Microwave and Infrared) does not emit any energy, but only passively receives and detects infrared radiation from the environment. Its working principle is that once the infrared radiation from the human body comes in, the pyroelectric device will produce a sudden electrical signal and send out a siren when focused by the optical system. They are typically used outside of a building either in security systems or automatic lighting applications, though are also be used indoors as part of a wider security system. PIR motion sensors can be either used as a standalone device or be linked up with a network. This PIR detector features such as pet immunity to avoid unwanted alerts being triggered by animals.  Features ● MCU controlled ● Auto temperature compensation ● Special filter lens, white light immunity 10,000Lux ● IP55 ● Detection range/angle: 12m x 15m:80° ● Pet immunity up to 25KG  Application Widely used in homes, factories, schools, supermarkets, convenience stores, accounting offices, villas and other places.  

Dual-tech Passive Infrared Detector (Microwave and Infrared)

Microtech Technology Co Ltd

 	 Item: 3.5&quot; capacitive touch screen for Iphone 4/4S 	 Outline dimension: 55.8x112.35x1.3mm 	 Active area: 49.56x74.04mm 	 Type: glass or acrylic + ITO Film (max 4 layers) 	 Thickness: glass window 0.7mm,1.1mm,3.0mm 	 Acrylic window 1.0mm 	 ITO Film75&mu;m,100&mu;m,125&mu;m,180&mu;m 	 Low power state current draw0.8 mA typical 	 TSP connect IC&nbsp;COF or COB 	 Transparency: &ge;85% depends on the quantity of layers 	 Haze&nbsp;&le;2.5% depends on the quantity of layers 	 Operating response: &lt; 10ms 	 Transparency temperature: -20&deg;C ~+40&deg;C 	 Humidity: 20%~90% non-condensing surface hardness &nbsp;&ge;3H&nbsp; 	 Driver ICMSG2133&nbsp; 	 Multi-touch5-points&nbsp;  

iPhone Capacitive Touch Screen

   Outline dimension: 202.35*153.3 mm   Active area: 162.6*122.1 mm   RGB   6 PIN  

8.0 Inch Capacitive Touch Panel

   Display mode: capacitive touch panel.   Outline dimension: 164 x 100.0mm.   Active area: 154 x 93.05mm.   Remark: 1.0 pitch, 6 pin.  

7.0” Capacitive Touch Panel

it is widely used in detecting the presence of an object

Magnetic Proximity Sensor

Description Xintec Magnetic Door Contact consists of a reed contact and a permanent magnet. When the door or window is opened, the reed contact is opened as the magnet is taken away, the magnetic field altered and the signal line interrupted. The reed switch and magnet are mounted parallel to each other using the surface-mount housing.  Features ● No standby power supply, good air tightness, long service life  ● Screw or adhesive mount ● High-impact weatherproof brown ABS plastic case ● Multiple magnetic sensitivity range, can be matched with magnet trigger  ● High stability, high reliability, high consistency   Application Perfect for sliding doors and windows where space is limited 

Magnetic Door Contact/Magnetic Proximity Switch (Surface Mounted)

Description Xintec Magnetic Door Contact consists of a reed contact and a permanent magnet. When the door or window is opened, the reed contact is opened as the magnet is taken away, the magnetic field altered and the signal line interrupted. These are often used in rigorous environments of commercial and industrial applications. The low profile housing of the floor mount unit, containing reed switches, are encased in a specific potting material, preventing damage due to moisture or humidity.  Features ● No standby power supply, good air tightness, long service life  ● Adjustable to fit most door-channel widths ● Reed switch has deactivated rhodium on gold underplating for long service life ● Weatherproof IP66 – Epoxy sealed for weatherproof installation ● Heavy-duty aluminum alloy case ● High stability, high reliability, high consistency   Application Suitable for heavy doors, overhead roller shutters and gates. 

Magnetic Door Contact Sensor/Magnetic Proximity Switch (Overhead Roller Shutter)

Description Quad Photoelectric Beam Sensor of Xintec is designed for a wide variety of outdoor and indoor residential, commercial and industrial applications 100m, 150m, 200m, 250m outdoor or 500m indoor. It's engineered to provide many years of trouble-free reliable operation, with outstanding false alarm immunity, in virtually all weather conditions including snow, rain and fog.  Features ● Max. protection range: outdoor: 100m, 150m, 200m, 250m, indoor: 500m ● Adjustable optical axis: Horizontal ±90°, Vertical ±10° ● Adjustable response time: 35-500ms ● AGC Electronic Circuit Design, adapting to adverse weather ● Environmental Discrimination Control Function (EDC)  Application It provides ideal cost-effective solutions for medium to long-range applications such as perimeter protection of buildings, fences, warehouses, factories, parking lots, gardens, walls, etc. 

Quad Photoelectric Beam Sensor (Outdoor&Indoor)/Active Infrared Intrusion Detector with Frequency Selection

Product Features Used for water level detection of toilet, sink, water tank, etc.Simple structureEasy maintenanceEasy to installConvenient commissioningRapid responseSuitable for detecting various water levels

Capacitance Sensor

Wear resistance and high temperature resistanceSimple structureEasy maintenanceEasy to installConvenient commissioningRapid responseWidely used  ParameterRatingContact FormA type (normal open) contactSensor Working Distance ON6.2± 2 mmSensor Working Distance OFF ≥10mmMax. Contact Rating10WMax. Switching VoltageDC 100VMax. Carrying CurrentDC 0.5AMax. Switching CurrentDC 1.0AInitial Contact Resistance700 mΩ MaxInsulation Resistance1000000000Ω Min. (DC 500V)Breakdown VoltageDC250V Min.(Cut-off Current 1mA,in 1 minute)Electrical Life10000000 operations Min. (DC 100V, 0.1A，Load R)Shock Resistance30G MaxVibration ResistanceVibration frequency of 10~55Hz. Amplitude of 1.52mm at(X, Y, Z) 3 directions, 2hours.Wire StrengthThe wire is hanging a weight of 3 kg for 1 minute or above. The wire should not be come out.Mechanical Life100000000operations Min.（No load）Operating Temperature-10℃ ~ +80℃.Operating LiquidWater、oilOperating HumidityRH 95% Max

Flow Sensor

Product features  It is applicable to water medium, with specific gravity ranging from 0.60 to 0.85 The working temperature reaches 95 ℃, and the withstand voltage is 5kg / cm2 It is used in petroleum processing, food processing, chemical industry, water treatment, pharmacy, electric power, papermaking, metallurgy, shipbuilding, boiler and other industries A variety of specifications are available and can be customized for customers 

Float

Wear resistance and high temperature resistanceSimple structureEasy maintenanceEasy to installConvenient commissioningRapid responseWidely used Contact type: Form A contact (normally open)Closed working distance: 6.2± 2 mmDisconnect working distance: ≥10mmMaximum contact capacity: 10WMaximum switching voltage: DC 100VMaximum energizing current: DC 0.5AMaximum switching current: DC 1.0AWorking temperature: -10℃ ~ +80℃Applicable liquid: water, oilWorking environment humidity: RH 95% Max

Simple structureLow energy consumption during movementStable dynamic characteristicsFast responseWorking stably in harsh environment

Capacitive Sensor

Feature List1. Accurately detects vehicle brake pedal distance displacement by 3D hall effect technology 2. Process distance displacement data, output the PWM data of brake pedal distance 3. ECU regulates the hydraulic pressure value according to the PWM data of brake pedal distance 4. Report PWM data of brake pedal distance to EDR by CAN bus technology  

Brake Pedal Force Sensor

Feature List   · Detect the rotation speed of the vehicle speed gear    · Compatible with CAN data bus technology · Detection accuracy 1%      

Vehicle Speed Sensor

It is widely used in detecting liquid level in high temperature environment e.g. 100 DegCThe flow switch is highly-sensitive, long-lasting, simply-structured, small in contact surface. Its requirement for medium’s flow rate, cleanliness and flow is low.

Product Features Wide action range Customizable Embedded cylindrical plastic shell Small size, easy installation and high reliability Wear resistance and high temperature resistance Stable switching operation Long service life It has anti-contact protection and higher safety performance Product Size (unit: mm)  Image Caption  Product Specification    Parameter Rating Contact Form A type (normal open) contact Magnet Spec. Size17.8×9.5×4.5(mm),Surface Magnetic≥3120Gauss Sensor ON 6.5 mm Min. Sensor OFF  15.2 mm Max Max. Contact Rating 10W Max. Switching Voltage AC 150V Max. Carrying Current DC 1.0A Max. Switching Current DC 0.5A Initial Contact Resistance 500mΩ Max Insulation Resistance 108Ω Min. (DC 500V) Breakdown Voltage DC250V Min.(Cut-off Current 1mA,in 1 minute) Electrical Life 106 operations Min. (DC 100V, 0.1A，Load R) Shock Resistance 30G Max Vibration Resistance Vibration frequency of 10 ~ 55Hz. Amplitude of 1.52 mm at (X, Y, Z), 3directions, 2hours. Mechanical Life 107 operations Min. (No load) Operating Temperature -10℃~ +80℃ Operating Humidity RH 80% Max         

it is used to detect low flow rate of liquid e.g. 50mL/Min

Low Flow Rate Flow Sensor

Description Xintec Magnetic Door Contact consists of a reed contact and a permanent magnet. When the door or window is opened, the reed contact is opened as the magnet is taken away, the magnetic field altered and the signal line interrupted. Recessed magnetic door contacts are made with the same magnetic reed switches used for surface-mount alarm contacts. Instead of a rectangular housing, recessed magnetic door contacts have a cylindrical case. This makes them easy to install simply by drilling a hole.  Features ● No standby power supply, good air tightness, long service life  ● Strong one-piece construction ● Brown case, high-impact ABS plastic ● High stability, high reliability, high consistency   Application Used for steel framed doors and windows where space is limited or to avoid unsightly installations 

Magnetic Door Contact/Magnetic Proximity Switch (Recessed)

	It is widely used in detecting liquid level in high temperature environment e.g. 100 DegC

Multiple Poles SUS Level Sensor

It is widely used in detecting liquid level in high temperature environment e.g. 100 DegC

Single Pole SUS Level Sensor

Flow sensor is highly-sensitive, long-lasting, simply-structured, small in contact surface. Its requirement for medium's flow rate, cleanliness and flow is low.Reed switch type/Hall typeA variety of standard and professional customizationCan detect low flow (0.1ml/min)

Working environment: automotive circuitSimple structureConvenient maintenanceEasy to installROHS certificationquick response

Conductivity Sensor

Feature List    · Keep monitoring and recording the vehicle front end sensor data    · Provide real data which cannot be tampered and deleted when the accident occurs · Built-in backup power · Compatible with CAN data bus technology · Provide data extraction interface ·Provide data analysis tools  

My Sourcing

Unfollow the following supplier?

Unfollow the following supplier?