Shenzhen MicroNature Innovation Technology Co Ltd

A lamp controller linked with an LED driver, communicates byHigh-Speed Power Line Communication (HPLC). Remotely turn ON/OFF, dimming (0-10V/PWM), data collection, 90-264VAC, 2W, IP66, lightning protection.   Features:- Industrial-grade Quality:Aluminum alloy shell, compact in size, with an IP66 protection rating, and the maximum load is 400W. - Remote Control:Built-in PLC Communication Module, supporting remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. - Failure Detection &amp; Safety Protection:Supports active protection functions such as overcurrent and overload and can actively provide warnings and report faults. - Precise Measurement:Precise data collecting such as current, voltage, power, energy consumption, and temperature, with an error rate of less than 2‰. - Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.   The MC-1P Single Light Controller adopts broadband power line communication technology, which uses the existing power lines to realize communication without additional wiring, and reduces the construction cost. The communication speed is fast, and the peak rate at the physical layer can reach 0.507Mbit/s.   MC-1P single light controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status and so on. It uses Orthogonal Frequency Division Multiplexing (OFDM) modulation technology with strong anti-interference ability. Automatic fast networking is supported. A maximum of 15 level trunks are supported over a long distance.    Key Parameters: * Communication based on PLC (Power Line Carrier Communication) * Dimming: PWM / 0~10V * Operating voltage: 90-264VAC * Frequency: 50-60Hz * Static power: &lt; 2W * Output current: 0-8A±2% * Load power rating: ≤400W * Operating temperature: -40°C~+85°C * Industrial packaging protection: IP66     PLC Single Light Controller can be used with gateway/traditional power supply/streetlight to achieve the role of remote monitoring, control and management of the street lighting network, and ultimately achieve the purpose ofenergy saving,cost reductionandefficiency increase.                 N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Rewiring Economical Maintenance Difficult Difficult Difficult Easy    

PLC Single Light Controller, Dimming (0-10V/PWM), data collection, 90-260VAC, IP66

PLC Single Light Controller with remote dimming and data collection

浙江方大智控科技有限公司

 	 1.Remote switch on/off, maximum internal 16A relay outputs; 	 2.With dimming interface:0-10V and PWM; With current, voltage, power, power factor, power remote reading functionsl&nbsp; With energy accumulation, can be remotely cleared; 	 3.With high-pressure gas discharge lamps, LED lamp failure detection function; 	 4.With a high-pressure gas discharge lamp power &amp; compensation capacitor damage detection; 	 5.With active fault information reporting functions 	 6.Lightning protection function.  

Smart street lighting Dual Lamp Controller 

Products Description:  A lamp controller linked with an LED driver, communicates byHigh-Speed Power Line Communication (HPLC). Remotely turn ON/OFF, dimming(0-10V/PWM), data collection, 85-265VAC, 1-3W, IP66, lightning protection.  Features:  - Industrial-grade Quality:Aluminum alloy shell, compact in size, with an IP66 protection rating, and the maximum load ofsingle-channel is 800W. - Dual-channel control:Each channel can be independently controlled for power driving and data collection.  - Remote Control:Built-in PLC Communication Module, supporting remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. - Failure Detection &amp; Safety Protection:Supports active protection functions such as overcurrent and overload and can actively provide warnings and report faults. - Precise Measurement:Precise data collecting such as current, voltage, power, energy consumption, and temperature, with an error rate of less than 2‰. - Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.   The MC-2P Dual Light Controller adopts broadband power line communication technology, which uses the existing power lines to realize communicationwithout additional wiringand reduces the construction cost. The communication speed is fast, and the peak rate at the physical layer can reach0.507Mbit/s.  MC-2P Dual light controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status and so on. It uses Orthogonal Frequency Division Multiplexing (OFDM) modulation technology withstrong anti-interference ability. Automatic fast networking is supported. A maximum of15level trunks are supported over a long distance.   Key Parameters:  ·Communication based on PLC ·Dimming: PWM / 0~10V  ·Operating voltage: 85V-265VAC ·Overall power consumption: 1-3W ·Single-channel output current: 0-10A±2% Dual-channel output current: 0-20A±2% ·Single Load power rating: ≤800W Dual Load power rating: ≤1600W  ·Operating temperature: -40°C~+85°C  ·Industrial packaging protection: IP66   PLC Dual Light Controller can be used with gateway/traditional power supply/streetlight to achieve the role of remote monitoring, control and management of the street lighting network, and ultimately achieve the purpose ofenergy saving/cost reductionandefficiency increase.                N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Wiring Economical Maintenance Difficult Difficult Difficult Easy    

PLC Dual Light Controller, Dimming(0-10V/PWM), data collection, 85-265VAC, IP66

PLC Dual Light Controller with dimming and data collection features

  Product Features Standard Interface: Complies with international NEMA standard interfaces.Remote Control: Supports remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. Safety Protection: Features active protection functions, including fault warnings and reporting. Precise Measurement: Collects data on current, voltage, power, energy consumption and temperature. Application Scenarios: Ideal for municipal Road lighting, tunnel lighting, and industrial lighting.Dimension DrawingWiring Diagram SAAS Cloud Platform Application Scenario Smart Street Lighting Smart Tunnel Lighting Supporting Products  

Smart 10%-100% Stepless Dimming PLC-IoT Light NEMA Interface Light Controller

Smart 10 100 Stepless Dimming PLC IoT Light Controller

 	 PLC transmission 	 Standard NEMA 7-PIN interface, plug and play； 	 Remotely turn ON/OFF, built-in 16A relay; 	 Support dimming interface: 0-10V(default) and PWM (customizable); 	 Remotely read electrical parameters: current, voltage, power, power factor and consumed energy; 	 Support recording total energy consumed and resetting. 	 Lamp failure detection: LED and HID lamp; 	 HID power failure and compensation capacitor failure; 	 Automatically report failure notification to server; 	 Automatically locate its father node(RTU); 	 Lightning protection; 	 Waterproof: IP65;  

Street Lighting Lamp Controller PLC NEMA

Product Description:  Concentrator, a communication bridge between the server (by 4G/Ethernet) and devices (by PLC). It has a built-in LCD display and smart meter, it supports 4 digital switches, updated by OTA, 3*220/380VAC, IP52, and lightning protection.     Features: -National Standard:Compliant with the National Power Grid Standards, compatible with both three-phase four-wire and three-phase five-wire systems.-Network Compatibility:Supports 4G / Ethernet. -Open Protocols:Supports MQTT and Modbus, enabling quick integration with third-party cloud platforms and devices.  -Local Control:Capable of independently executing lighting strategies and controlling sub-devices in offline mode.  -Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.        MG-E3 Smart Lighting Concentrator adopts thelatest PLC-IoT communication technologyand is used with PLC Single Light Controllers/Dual Light Controllers or PLC smart driver power supplies. It is capable ofcommunication managementanddata transmission,protocol conversion,data processing and forwardingand other functions and can facilitate users to understand, manage and control lighting devices anytime anywhere.  MG-E3 smart lighting concentrator has excellentterminal electromagnetic compatibilityperformance, can resist the interference of high-voltage spikes, strong magnetic fields, strong static electricity, lightning surges, and works undera wide range of temperature. It is sealed by ABSwaterproof and flame-retardantmaterial with wall-mounting adapter, compact and easy to install.                         High Level of Security:Utilizes Modbus encryption algorithm to ensure communication security and prevent data leakage.  Strong Stability:Supports automatic reconnection, exception recovery, and self-monitoring to ensure real-time device availability and normal system operation.    Key Parameters: ·LCD display.·PLC communication module.·OS: High-speed 32-bit ARM &amp; Linux.·Interface: Ethernet, RS485, and USB.·Network: 4G/Ethernet·Local Capacity: 500 lights at maximum·Point-to-Point Communication Distance: 2 kilometers at maximum·Networking: Supports Mesh networking technology.·Working temperature: -40℃~+70℃·Lighting Protection.·Memory capacity: 256MB.·Protection level: IP52.·Remote upgrade support.       N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No AdditionalRewiring Economical Maintenance Difficult Difficult Difficult Easy  

Power Line Carrier, PLC Smart Light Concentrator for Street Light/Industrial light, MicroNature MG-E3 Street Light Outdoor Gateway

PLC Smart Light Concentrator for street and industrial lighting

江门市立大照明有限公司

Feature of this LED controller：

This multi-functions controller which has digital indicating is specially designed to be used exclusively with LED lighting; its output has four wires three channels (common-anode)： 	 Touching Panel, easy for operating and safe. 	 Aluminum alloy housing is good for heat spreading directly. 	 DMX digital addresses setting and power off protecting 	 Working style: (master and slaver connecting mode, DMX mode, Independent mode） 	 Gray glass 10 scale adjustable. 	 Built in 10 set program 	 Compatible with DMX512 signal, such as DMX 512 control. 	 DMX dimmable and independent dimmable by pressing key  Specification: 	 Input Voltage:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; AC110V-240V 50HZ/60HZ 	 Output Voltage:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; DC110-240V 	 Output power rate:&nbsp;&nbsp; 1000W/120V&nbsp; 2000W/230V 	 Output current:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &le;3A&nbsp;&nbsp;&nbsp; 	 Output Connector:&nbsp;&nbsp; 4&nbsp; channels.&nbsp;&nbsp; 4-pin cables 	 Communication port:DMX512 communicate port (1:earth, 2:Data-, 3:Data+) 	 Working temperature:&nbsp;&nbsp; 0&deg;C~+35&deg;C (0&deg;F ~ +104&deg;F) 	 Net Weight:&nbsp;&nbsp; 0.7Kg 	 Dimension:&nbsp; L160 mm * W147 mm * H42 mm 	 Housing material:&nbsp; Silvery aluminum alloy 	 Metal Casting Process: Die Casting (Low Pressure)  

110-240V DMX Decoder and Controller

110 240V DMX Decoder and Controller for LED lighting

MicroNature MN-H2016 PLC Signal Isolator For Smart Lighting, Power Line Carrier Communication    Features  1.  Rail Installation: Standard rail design, compact appearance, easy to install inside distribution boxes.  2.  Complete Specifications: Provides various specifications of 2A, 16A, 40A, meeting various scenarios.  3.  Stable and Reliable: High-permeability magnetic core, effectively filters high-frequency noise signals within non-communication frequency bands.  4.  Safety Protection: Coil made of purple copper material, low heat generation, long lifespan, flame-retardant material casing.  5.  Application Scenarios: Municipal road lighting, tunnel lighting, industrial lighting, commercial lighting.                    PRECAUTIONS FOR USE   Operating Temperature Range -25℃ to +85℃(Temperature rise included) Rated Current 16Arms Rated Voltage 250Vac Rated Frequency 50/60 Hz Rated Temperature 40℃ Climatic Category 25/085/21                                 Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching. 

 MicroNature MN-H2016 PLC Signal Isolator For Smart Lighting, Power Line Carrier Communication

MicroNature MN H2016 PLC Signal Isolator for Smart Lighting

MicroNature MN-H202 PLC Signal Isolator For Smart Lighting, Power Line Carrier Communication    Features  1.  Rail Installation: Standard rail design, compact appearance, easy to install inside distribution boxes.  2.  Complete Specifications: Provides various specifications of 2A, 16A, 40A, meeting various scenarios.  3.  Stable and Reliable: High-permeability magnetic core, effectively filters high-frequency noise signals within non-communication frequency bands.  4.  Safety Protection: Coil made of purple copper material, low heat generation, long lifespan, flame-retardant material casing.  5.  Application Scenarios: Municipal road lighting, tunnel lighting, industrial lighting, commercial lighting.                   PRECAUTIONS FOR USE   Operating Temperature Range -25℃ to +70℃(Temperature rise included) Rated Current 40Arms Rated Voltage 250Vac Rated Frequency 50/60 Hz Rated Temperature 40℃ Climatic Category 25/085/21                                 Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching. 

MicroNature MN-H2040 PLC Signal Isolator For Smart Lighting, Power Line Carrier Communication

MicroNature MN H2040 PLC Signal Isolator for Smart Lighting

CUPOWER EUROPE GMBH

Product Features Built-in isolated adjustable power LED driverCurrent adjustment via NFCFlicker free LED driverOutput current 100…550 mAMax. output power 14 WConstant lumen output (CLO)Current output default value 100 mAFor luminaires with protection class l, ll5 years warranty

Outdoor Compact On/Off LED Driver, 14W, 100-550mA, Flicker-Free, NFC-Control, Constant Lumen Output

Outdoor Compact On Off LED Driver, Flicker Free, NFC Control

 Product Features Integrated single-lamp controller and dimming power supply for easy installation. Constant current output with high-precision power metering features. Undervoltage, overvoltage, short circuit, and overheating safeguards. SaaS cloud platform enables remote management and real-time data analysis. Power Line Communication (PLC) Technology Communication Distance2 km point-to-point communication distanceLoad Capacity1 gateway controls 499 devicesStability99.99% stable communicationConvenienceNo rewiring required Dimension Drawing  SAAS Cloud Platform  

Power Line Communication Constant Current Dimming Power Supply

Built-in non isolated adjustable power LED driverDIP control adjusts the currentFlicker free LED driverOutput current 300...1050 mA by dip switch abjustMax. output power 42 WFor luminaires with protection class l,II5 years warranty 

Track LED Driver 42W, Non-Isolated, DIP Adjustable, 300-1050mA Output, Flicker-Free, For Class I/II Luminaires

Track LED Driver 42W, Non Isolated, Flicker Free

A lamp controller linked with an LED driver, communicates byHigh-Speed Power Line Communication (HPLC). Remotely turn ON/OFF, dimming (0-10V/PWM), data collection, 90-260VAC, 2W, IP66, lightning protection.  Features:- Industrial-grade Quality:Aluminum alloy shell, compact in size, with an IP66 protection rating, and the maximum load is 400W. - Remote Control:Built-in PLC Communication Module, supporting remote switching, dimming (0-10V / PWM), configuration, and OTA upgrades. - Failure Detection &amp; Safety Protection:Supports active protection functions such as overcurrent and overload and can actively provide warnings and report faults. - Precise Measurement:Precise data collecting such as current, voltage, power, energy consumption, and temperature, with an error rate of less than 2‰. - Application Scenarios:Municipal Road lighting, tunnel lighting, and industrial lighting.   The MC-1P Single Light Controller adopts broadband power line communication technology, which uses the existing power lines to realize communication without additional wiring, and reduces the construction cost. The communication speed is fast, and the peak rate at the physical layer can reach 0.507Mbit/s.   MC-1P single light controller uses power line communication to collect data and report input current, voltage, active power, energy, power factor, temperature, on/off light status and so on. It uses Orthogonal Frequency Division Multiplexing (OFDM) modulation technology with strong anti-interference ability. Automatic fast networking is supported. A maximum of 15 level trunks are supported over a long distance.   Key Parameters: * Communication based on PLC (Power Line Carrier Communication) * Dimming: PWM / 0~10V * Operating voltage: 90-260VAC * Frequency: 50-60Hz * Static power: &lt; 2W * Output current: 0-8A±2% * Load power rating: ≤400W * Operating temperature: -40°C~+85°C * Industrial packaging protection: IP66     PLC Single Light Controller can be used with gateway/traditional power supply/streetlight to achieve the role of remote monitoring, control and management of the street lighting network, and ultimately achieve the purpose ofenergy saving,cost reductionandefficiency increase.               N/A DALI KNX Bus RS-485 PLC-IoT Communication Medium TP TP TP Power Line Point-to-point Communication Distance 0.1 km 1 km 1 km 2km Mesh Networking NO NO NO Support Network Node Scale 64 200 32 500 Deployment Cost Requires Rewiring   High Cost Requires Rewiring   High Cost Requires Rewiring   High Cost No Additional Rewiring Economical Maintenance Difficult Difficult Difficult Easy 

HPLC Single Light Controller Dimming (0-10V/PWM), data collection, 90-260VAC, IP66

HPLC Single Light Controller with dimming and data collection

佛山市华全电气照明有限公司

It is the constant voltage LED driver mainly for landscape lighting and signage applications. The product is IP67 waterproof, 6kV surge protection level, wide operating temperature, aluminum housing with fully potting inside. It is robust and can work in harsh outdoor environment. It is slim design with 380*45*26mm, can be install in many applications flexibly. The power is 250W, output voltage is 24V, can be 0-10V dimming with range 0.1-100%. More parameter please refer to product specification. 

250W 0-10V DIM Outdoor Constant Voltage LED Driver

泉州斯玛斯电子科技有限公司

ModelSMT-12030-VT-PSMT-24030-VT-PSMT-48030-VT-PCertificateUL / FCC / Class POutputDCRateVoltage12V24V48VVoltage Tolerance±5%Vo±2.5%Vo±1.25%VoLoad Regulation≤2%LineRegulation≤0.5%Rated current2.5A1.25A0.63ARated power30WVoltage Ripple500mVp-p400mVp-p350mVp-pOvershoot voltage&lt;1%(full load),&lt;2%(no load)Output voltAdjustment12-13V24-26V48-50VOutput mode selectionThe DIP switch in the "ON" position represents the PWM (Pulse - Width Modulation) mode, and in the "1" position represents the VR (Modulation of DC Voltage) mode.Switching the output mode requires the power to be cut off for 3 seconds and then powered on again for the mode switching to take effect.InputVoltage Range100-277VACFrequency Range47 - 63HzPower Factor@ full load&gt;0.98@120VAC   &gt;0.95@277VACTHD(Typ.) @ full load&lt;20%@120V    &lt;20%@277VEfficiency@ full load&gt;78%@120VAC   &gt;79%@277VACAC Current(Max.)≤0.4A @120VAC  ≤0.16A@277VACInrush Current (Typ.)25A,120us@50%Ipeak 120VAC   60A,136us@50%Ipeak 277VACLeakage current≤0.5mAProtectionShort CircuitHiccup mode, can be automatically restored after abnormal removalOver Load≤120%,Constant - Current Mode, automatic recovery after exceptionOver temperatureWhentheambienttemperatureexceeds55℃±5℃,theoutputisturnedoffEnvironmentWorking TEMP.-40~+40℃ (see below derating curve)Working Humidity20 - 90%RH non-condensing Storage TEM.,Humidity-40 ~ +80℃,10 - 95% RH non-condensing TEMP.coefficient±0.03%/℃(0 ~ 50℃)Vibration10 ~ 500Hz, 2G 12minutes/cycle, XYZ axis 72 minutes eachSafety &amp; EMCSafety standardsUL8750 CAN/CSA-C22.2 No.250.13Withstand voltageI/P-O/P:1.88KVACIsolation resistanceI/P-O/P:&gt;100MΩ/500VDC/25℃/70%RHSurge Immunity TestAC Power Line:Differential Mode 2KVEMC ImmunityFCC/ICES do not request this testEMC EmissionFCC Part15 Subpart B;ANSI C63.4:2017;ICES-005 Issue 5OthersNet Weight250gDimension155*54*19.7mm(L*W*H)Packing40 pcs/ CTNNotes1. Unless otherwise specified, all specifications are measured at 120V input, rated load, and 25℃ ambient temperature.2.In the case of low input voltage, derated output should be used to ensure a long service life.3.default states:①The output mode is PWM output by default.②The dimming curve is a gamma2.2 curve.3. LEDdriverMeetstheharmonicemissionsrequirementsofANSIC82.77-10. 

PWM & VR output Switchable 277Vac Triac Dimming Constant Voltage 12V 24V LED driver 30W 

PWM VR output Switchable 277Vac Triac Dimming LED driver

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.  1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                         Model NO. P8-060E048 Output Power 60W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years                        Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.         

MicroNature 60 Watts Smart LED Driver Constant Power Output Voltage Cover 30-48V Build-in PLC Module Remote Control, Dimmable

MicroNature Smart LED Driver with remote control and dimmable features

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.     1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                               Model NO. P8-240E048 Output Power 240 W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years                              Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.        

MicroNature 240 Watts Smart LED Driver Constant Power Output Voltage Cover 30-48V Build-in PLC Module Remote Control, Dimmable

MicroNature Smart LED Driver with remote control and dimmable features.

Zhuhai Ltech Electronic Technology Co., Ltd

 	 Fully Digital circuit design, excellent performance and long working life 	 PWM digital dimming, maintain the best LED&#39;s CRI (color rendering index) 	 Standard logarithmic dimming curve, the human eye visual feel more comfortable 	 60000:1 wide 	 Dimming range, 0-100% full dimming range 	 LED start at 0.1% possible 	 Power factor0.99 	 Efficiency 86% 	 THD(Total Harmonic Distortion)10% 	 Short circuit / Over-temperature /Over load protection 	 Current consistent in multi LED driver working, balanced light 	 Class 2 security isolation power supply 	 Compliant with SELV(Safety Extra Low Voltage) standard 	 Model: DMX-150-12-F4M1 	 Dimming Interface: DMX512 / RDM, Push Dim 	 Input Voltage Range: 100-240Vac &plusmn;10% 	 Power Factor: PF0.99/115Vac , PF0.95/230Vac, at full load 	 Efficiency: 91% 	 Output Voltage: 12Vdc 	 Output Power: Max. 150W 	 Input Current: 115Vac=1.6A, 230Vac=0.8A  

DMX/RDM LED Intelligent Dimming Driver 

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.    1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                            Model NO. P8-150E048 Output Power 150W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years                               Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.        

MicroNature 150 Watts Smart LED Driver Constant Power Output Voltage Cover 30-48V Build-in PLC Module Remote Control, Dimmable

 100-277 Vac triac dimmable 36 watt constant voltage led strip driver
Features   	 Output constant voltage type 	 Input voltage range 100-277VAC&nbsp; 	 Class 2, Class P, Type HL approval 	 Built-in PFC function&nbsp;/ Efficiency &gt; 82%&nbsp;/ PF&gt; 0.99 	 Dimming range: 0~100%&nbsp;/ load: 5~100% 	 Protections:short circuit/over voltage/over heat 	 IP20&nbsp;design for indoor&nbsp;dry or damp environment&nbsp;installations 	 Cooling by free air convection&nbsp;&nbsp; 	 Work with leading edge and trailing edge triac&nbsp;dimmers&nbsp;available 	 PWM output, does not change the color index 	 Full protection aluminum&nbsp;housing, for dry, damp, wet location 	 Strong compatibility, flicker-free dimming 	 Suitable for LED lighting and moving sign applications 	 Compliance to worldwide safety regulations for lighting 	 7 years warranty   &nbsp;Dimming Operation   	 Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer. 	 Compatible with Leading edge or trailing edge triac dimmers, but trailing edge dimmers work better.. 	 Please try to use dimmers with power at least 1.5 times as the output power of the driver.  

Triac Dimmable Constant Voltage LED Strip Driver

Shenzhen Jisim Technology Co.,Ltd.

1.Magnetic suction lamp specific dimming driver 2.Four wire magnetic track achieves 0/1-10V dimming function 3. Supports 0/1-10V, PWM, Rx dimming, and can achieve a slow start effect 4. One millionth ultra deep dimming and multi lamp synchronous dimming function 5.150-700mA 12 level output current, set through dip switch 6.Built in MCU, unique dimming algorithm, no flicker, no noise 7. Seamless docking with major smart brands' 0-10V control systems 8. Small size suitable for STUCCHI standard magnetic lamp housing, with an ultra long lifespan 9. Output short circuit, open circuit, overload protection 10. Holding electric hot plug and unplug 

0-10V magnetic suction lamp dimming driver   no flicker  Support slow light startup

0 10V magnetic suction lamp dimming driver

深圳市熠辉照明科技有限公司

The STB27FD Dimming Driver Series is designed for LED high bay fixtures with 0–10V dimming. With an IP65-rated, easily replaceable battery pack and waterproof PG connectors, the series is built for durability and flexible installation. LED Dimming Driver — the STB27FD Series Suitable for LED high bay fixtures with 0–10V dimming function.Manual test and remote-control test.Built-in high-power AC relay to control normal LED driver operation.Red and green LED indicators.Standard lifting ring and safety rope.5-year warranty.Waterproof Standard IP65 waterproof.Waterproof PG connectors for AC input/output and dimmer input/output.Temperature Management Operating range: 0°C to 45°C.Battery and Emergency Features Independent battery pack, replaceable by hand.Used with lithium iron phosphate battery.3-hour working duration.Battery pack includes built-in charging and discharging protection board.First power-on triggers a lamp compatibility self-test.Faults activate hold mode; reset with a 15-second test button.Series Models STB27FD-09T-LFPB4S1PSTB27FD-20T-LFPB4S2P

Dimming Driver

Dimming Driver for LED high bay fixtures with IP65 rating

Nanjing Licon IoT Technology Co.,Ltd

● Standardised connection with NEMA、Zhaga、CSA051, easily installation for street lights controlling and dimming. ● Compatible with various communication method:RS-485/HPLC/ZigBee/LoRa/NB-IoT/4GCat.1etc. ● Installed on the top of lighting fixture,lower than 8m from the the ground,which benefits the transmission of wireless signals. ● Plug and play installation, no wiring required. ● Flame-retardant PC material shell, anti-aging and unbreakable ● Built-in Antenna and communication module,no needs to open holes ● Adopts industrial-grade MCU and power metering chips, high reliability. ● Installed on each lamp, and can be commanded by centralized platform or mobile APP to realize the lighting control of area or road. ● With alarm functions of abnormal on/off of lamp,lamp malfunction,communication failed etc. ● 0~10V/PWM dimming output for LED street light dimming(optional) 

NEMA streetlight controller

NEMA streetlight controller for efficient street light management

MicroNature Smart LED Driveris an AC/DC intelligent dimmable power supply that adopts latest generation PLC-IoT communication technology and is equipped with a SaaS cloud platform. It has advantages such asfast networking,wireless installation,long communication distance, andeasy maintenance. Through the collection, uploading, and analysis of big data, and the application of cloud technology, it enables remote management and operation of user devices. It comprehensively enhances energy utilization efficiency and the level of intelligence, greatly reducing manual maintenance costs.  1.   Industrial-grade quality:The body is made of full aluminum alloy, compact in size, with an IP66 protection rating, and isolated power supply. 2.   Dual-function design:Built-in power line carrier module, supports remote control, integrates single lamp controller and dimmable power supply functions. 3.   Safety protection:Supports active protection functions such as overcurrent and overload, supports active warning and fault reporting. 4.   Precise measurement:Accurately collects current, voltage, power, energy consumption, temperature, etc., with an error rate of less than 2‰. 5.   Suitable scenarios:Municipal Road lighting, tunnel lighting, industrial lighting.                         Model NO. P8-110E048 Output Power 110W Working Temperature -40℃~50℃ Storage Temperature -40℃~80℃ IP Rating IP67 Input Voltage 90-274 V Rated crossflow voltage 30-48 V Input Voltage Frequency 50/60 Hz Safety Certification Designed in compliance with IEC/EN 61347-1, EN 61347-2-13, and UL 1310 standard requirements. Operation Life 5 Years                            Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.        

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?