深圳市金流明光电技术有限公司

LEDGEAR® C10 is part of the Kinglumi 3in1 compact LED drivers family with DALI-2, Push-DIM and 1-10V dimming. Beside C10(1W-20W), there’re also C11(20W-40W) and C12(40W-60W)suitable for indoor lighting. Available in both built-in and independent(with cable clamp) installations, they are especially suitable for small cut out hole downlights no less than 54mm diameter, or any other limited ceiling space installations. The drivers equipped with push-fitterminals, which enables easy installation, and the DIP switches located on side allows easy output current setting without opening the driver housing. 2 SKU of LEDGEAR® C10 with variable output voltage of 6-52V with 120-1050mA constant current output, fully perfect for all the LED modules with SELV input with 16 levels of current optional. These wide operating windows and easy wiring for LED modules makes it super flexibility and warehouse inventory reduction. These C10 drivers has continuous dimming down to 0.1% of full output current, and fade smoothly between 100% and 0.1%.  Features •   DALI-2, Push-DIM and 1-10V 3in1 dimming •   DALI approved and IEC 62386Part 101,102, 207 qualified •   Built-in or independent(with extra cable clamp) 2in1 application •   16 output current levels with wide range output voltage •   Continuous dimming down to 0.1% and fade smoothly between 100% and 0.1% •   Pst LM &lt;0.8; SVM &lt;0.3 much better than EU 2019/2020 requirement) •   Flicker free: flicker percentage &lt;3%(IEEE1789) •   ENHANCED amplitude dimming technology •   Suitable for Min. cut-out hole diameter 54mm for recessed downlights •   Constant light output(CLO) on request(factory set) •   Built-in with permanent memory for DALI and Push-DIM •   Reliable, Class II, SELV according EN 61347 •   Protection for output open load, short circuits, over voltage and over temperature •   Over 50,000 hrs lifespan, Five-year factory guarantee Benefits •   Full flexibility &amp; Optimized Inventorythanks to •   Twomodel covers wattages from1W to20W •   3in1 dimming, 2in1 application and 16in1 current levels •   Connection Interfaces •   DALI DT6, Push-DIM, 1-10Vdimming •   Strain relief with cable clamp •   Terminal blocks: push-fit terminals  Typical applications Fordownlight and spot light in both residential, commercial and decorative lighting application   

Ultra Compact DALI-2 one4all 20W Driver: 120-1050mA, 6-52V output, 0.1% dimming

LEDGEAR® C9, the most compact design DALI-2 looping LED driver in the world, which covering all the wattage within 22W(500mA) for indoor lighting, especially suitable for cut out hole no less than 66mm, and bigger but with small ceiling void. The driver equipped with push-fit terminals, which enable through wiring of Primary, DALI and Push wires throughout the driver, and save lots of time and effort on a site’s actual wiring work. The terminals allow quick cable connections without any tool, and also support a variety of wire gauge and cable thicknesses. Assembled with 4xDIP switches, the driver allows output current selectable, or programmed any output current by DALI. Variable output voltage of 14-40V with constant current output. These wide operating windows and easy wiring for LED modules makes it super flexibility and warehouse inventory reduction.    Product description Design DALI-2 &amp; Push-DIM 2in1 dimmingMin. cut-out hole diameter 66mm for recessed downlightsReliable, Class II, SELV according EN 61347ENEC, CE, CB approved by TUV SUD, SAA, Ctick qualifiedEco Design Directive (EU) 2019/2020 compliantTool-less installation and with through wiringENHANCED amplitude dimming technology±5% output current accuracy(under maximum load)Protection for output open load, short circuits, over voltage and over temperatureBuilt--in with permanent memory for DALI and Push-DIM, 100,000 times memory80°C Maximum case operation temperature(tc-point ¹)Operating temperature ¹: -25°C ~ +55°C, the humidity: 20% ~ 85%Over 55,000 hrs nominal lifespan at tc=65°CFive-year factory guarantee and lifetime technical support ¹“¹” Detailed data please refer to the " PARAMETERS" table .Features &amp; Benefits    Flexibility &amp; Optimized Inventory Both model covers wattages from 4.8W to 19W and differs in lifespanWattage selectable by 3xDIP switches.Push-fit secondary terminals for LED module wires  Human Centric Design Easy &amp; Quick connection with push-fit terminals and clip-on end cap for strain relief, super large wiring spaceLoop in &amp; loop out function, max.2.5mm2 cross section L, L, N, N, DA, DA,DA,DA stranded wire or solid wireLoose wiring inspection don't need to open the transparent end capConnection Interfaces DALI DT6, Push-DIMStrain relief with through wiring functionTerminal blocks: push- fit terminalsHousing Properties Casing: polycarbonate, whiteType of protection IP20Typical applications For downlight and spot light in both residential, commercial and decorative lighting applications   

Super compact DALI-2 driver for downlights: covering 2-19W output

Super Compact DALI 2 Driver for Downlights

EMTRONS TECHNOLOGIES LTD

Extra Compact Universal LED Emergency Converter

荣大加利派有限公司

High QualityMaterial: Aluminium or ZamakColor: Various colorFinish: Electro-plating or E-coatingSize: Φ70**H10mmWeight: 70g

Aluminium Compact

万保刚电子集团有限公司

Claf AC/DC Power Suppliers , DC/DC Converters 

Claf AC/DC Power Suppliers

Ledoux Lighting Co. Ltd

Modular Lighting System 48V combines unornamented aesthetics with a multitude of configuration options and effortless installation. The outcome is an ecosystem of quality components perfect for spaces where constant flexibility and high performance are required.   

DC.TS0206-C

DC TS0206 C Modular Lighting System with flexible configurations

盛达发展有限公司

 Featured here is a DC motor&nbsp;with a lightweight and&nbsp;compact design. It is manufactured under strict quality supervision. This DC&nbsp;motor delivery exceptional performance with high stability.&nbsp;    Nominal voltage: 4.5V.   Operating voltage range: 1.0-4.5V.   Speed: 7,100rpm (no load), 5,600rpm (maximum efficiency).&nbsp;   Current: 0.05A (no load), 0.18A (maximum efficiency).   Torque: 0.100oz-in, 7.4g-cm.   Output wattage: 0.43W.   EFF: 51.1%.   Stall torque: 0.49oz-in, 35.5g-cm.   Weight:&nbsp;17.5g.   Typical Application: CD/DVD Player.  

CD Player DC Motor

CD Player DC Motor with high stability and compact design

Manson Engineering Ind'l Ltd

This new series of non-isolated digital DC-DC Step Down Converter with micro-processor control for fine adjustment of output voltage to optimally suit the loading condition. The 3 digit LED display shows: output voltage, current, operation mode and fault status It is further equipped with 4 special features:1. A full powered 2 Stage Charger with 14.3V Bulk &amp; 13.6V Float Charge.2. A Remote Control terminal that turns off the converter when the Ignition is switched off, preventing discharging of starter battery. This terminal can be used with other external on-off switch set up.3. A Remote Voltage Sensing at load point to ensure accurate output voltage for distant load/ battery to ensure optimal operation.4. An independent, separate and always-on output (0.5A 13.8VDC) for essential devices such as security system that requires a permanent dc source. It can also be used for the remote on off switch. Micro-Processor Control with switching mode power design.19 -36VDC Input with adjustable Output 12 to 15VDC in 0.2V step.3digit LCD display for Current, Voltage, Operation Mode and Protection Diagnosis .2 Stage full powered charger mode with 14.3V bulk and 13.6V float charge.Remote Voltage Sensing for optimal powering of distant load or charging battery.Remote control terminal auto On/ Off with ignition control and other external on/off switch.An independent always-on auxiliary output (0.5A, 13.8V) to power critical electronic device or the remote on off switch.8 fail- save protections of which 6 with diagnostic code at the LED display.Input under voltage warning has remote alarm connection.Optional accessory AVS-5025 vibration sensor to automatically control the On-Off charging operation without touching the car’s electrical system at all. This is ideal for non-technical users.Extensive ProtectionMulti-stage software based safety device with early warnings of impeding shut down faults for low input voltages. Most of the protections are self recoverable when conditions return to normal with 6 diagnostic code on the LED display. Input under voltage (self recoverable)Input over voltage (internal fuse)Output over voltage (self recoverable)Output short circuit (self recoverable)Output overload (self recoverable)Output (battery) reversed polarity (internal fuse)Over temperature (self recoverable)Fan Stuck Fault (jammed object removed -&gt; self recoverable)

SDC-5300 Series Programmable DC-DC Converter and Battery Charger

SDC 5300 Series Programmable DC DC Converter and Battery Charger

联益电器制品厂有限公司

Input: 220-240V~50HzCombination contain:– 3 x 13A BS Socket– 1 x LED Strip Light– 1 x Touch sensor dimmable switch– 2 x USB charger port– Dual USB Output: Total Max. DC 5.0V, 2.4A, 12.0WConstruction: Aluminium casingComply to CE, BS, RoHS and ErP  Features: Designed with sockets and lighting modules for undercabinet and undershelf mountingIdeal for kitchen, home office and work stationAvailable with hanging tray optionsModuler design, available in different combination10 types of power socket module available (BS, Schuko, NF, UL and SANS approved)   #powerstation, #powersocket, #powerstationwithlight, #usbpowersocket, #surfacemount, #powercharger, #usbdeskcharger, #desktopcharging#desktoppowerstation, #easyinstall 

Power Station - HDCS Series

Power Station HDCS Series with USB and LED features

CUPOWER EUROPE GMBH

The CUPOWER OUTDOOR COMPACT ON/OFF LED Driver Series is built to deliver reliable and flexible power solutions for outdoor lighting applications. These drivers offer NFC programmability, enabling easy current adjustments for various project requirements, and feature a flicker-free design for enhanced visual comfort. Each model in the series supports Constant Lumen Output (CLO), maintaining consistent brightness over time, and is designed for luminaires with Class I/II protection. With built-in isolation for added safety, the drivers provide an output current range from 100mA to 1500mA, and a maximum output power from 14W to 200W. These drivers come with a 5-year warranty, making them ideal for both residential and commercial installations that require long-lasting and efficient lighting solutions. Key Features: Built-in isolated adjustable power LED driver for reliable and safe operation.NFC programmable for flexible current adjustments.Flicker-free LED driver for smooth lighting control.Constant Lumen Output (CLO) ensures consistent lighting performance over time.Protection Class I/II compatibility for a wide range of luminaires.5-year warranty for guaranteed long-term performance. All parameters are displayed in the specification table for detailed reference.  Specification Table ModelOutput Current (mA)Max. Output Power (W)Input Voltage (V)ID ECSCB 14/230/100-550 NFC OUT100-55014230ID ECSCB 24/230/200-1050 NFC OUT150-105024230ID ECSCB 40/230/200-1050 NFC OUT150-105040230ID ECSCB 75/230/200-1050 NFC OUT150-105075230ID ECSCB 110/230/200-1050 NFC OUT150-1050110230ID ECSCB 165/230/200-1050 NFC OUT150-1050165230ID ECSCB 200/230/200-1500 NFC OUT150-1050200230  

OUTDOOR COMPACT ON/OFF LED Driver Series, 14W-200W, 100-1500mA, NFC Programmable, Flicker-Free, Constant Lumen Output, IP Rated, Class I/II for Luminaires

The CUPOWER COMPACT SELV Casambi LED Driver Series delivers flexible and intelligent lighting solutions for various applications. This series offers NFC programmability, constant lumen output (CLO), and DC emergency support, ensuring optimal performance and reliability. With flicker-free dimming from 1% to 100%, these drivers are ideal for precision lighting control. All models support i-Data functionality, anti-glow technology to prevent residual light when off, and are compatible with Class I/II luminaires. These features make the COMPACT SELV Casambi series an excellent choice for both commercial and residential environments that require advanced, flicker-free, and programmable lighting solutions. All parameters are displayed in the specification table for detailed reference. Specification Table ModelOutput Current (mA)Max. Output Power (W)Input Voltage (V)ID ECSCB 28/230/150-700 BH21 NFC CS150-70028230ID ECSCI 42/230/300-1050 NFC CS300-105042230ID ECSCB 42/230/300-1050 BH21 NFC CS300-105042230 

COMPACT SELV Casambi LED Driver Series, 28W-42W, 100-1050mA, NFC Programmable, Flicker-Free, Constant Lumen Output, DC Emergency Support, Class I/II for Luminaires

COMPACT SELV Casambi LED Driver Series with NFC programmability

Lumi Lime Lighting Engineering & Products Limited

DC WALLWASHERS Lumilime's DC Wallwasher series is designed for application where energy efficiency,electromagnetic interference, andlongevity areof concerns. Together with our dimming synchronizers, the wall washers are able to delivery high lumen efficiency in 0-10V and DALl dimming systems 

DC wall washer

天宝国际兴业有限公司

This power delivery quick charger comes in a compact rectangular design and has a foldable two-pin plug. It has a USB port for output and is suitable for mobile phones, tablets and other USB compatible devices. The PD quick charger offers 45W maximum power and provides safe and efficient charging. 	 Maximum power: 45W. 	 Output voltage range:&nbsp; 5V/9V/12V/15V/20V. 	 Output current range: 3A/3A/3A/3A/2.25A. 	 Input voltage range:&nbsp; 100-240Vac 50/60Hz. 	 Energy efficiency index: VI. 	 Compact rectangular design. 	 Foldable two-pin plug. 	 USB port for output. 	 Suitable for USB compatible devices. 	 Safe and efficient charging. 	 Applications: mobile phones, tablets, notebooks, game consoles and other IT communications and AV audio and video related electronic equipment.  

PD Quick Charger

PD Quick Charger with compact design and foldable plug

Smar LED Lighting Guangzhou Co., Ltd

DOWNLIGHT, TRACKLIGHT, SPOTLIGHT COB 1)Meet EMC standard. 2)Dimmable IC. 3)Surge protection 2KV. 4)OTP, OVP, OCP.     Directly connect to the city power supply, without the need for an external driver. High-voltage linear IC. Dimmable. Power factor greater than 0.9. Has over-temperature protection, over-voltage protection, and over-current protection functions. E-mail: dale@smarledlighting.com www.smar-ledlighting.com 

Driver on board COB, driverless COB, Dimmable COB, COB Module, LED COB

Driver on board COB, driverless COB, Dimmable COB

Shenzhen Dikai Industrial Co Ltd

 	 Mini digital gauge or compact digital diamond gauge. 	 Product size: 88.5 x 47.4 x 14.4mm. 	 Measures in: 0-25mm by 0.01mm. 	 This compact digital gem gauge is excellent for convenience and accuracy. 	 Zero can be set at any position using the zero buttons; also you can lock the gauge at any position using the locking screw making it easy to select comparable size stones. 	 Simply change between millimeters and inches by using the interchange button. 	 Comes packaged in a quality compact case. 	 Diamond Gauge, Digital Gauge, Jewelry Gauge, Jewellery Gauge  

Mini Compact Digital Diamond Gauge in Deluxe Pouch Jewelry Digital Gauge 

Mini Compact Digital Diamond Gauge in Deluxe Pouch

鸿科电子实业有限公司

Highlighted here is a high performance LED module that allows you to easily control energy in a desired area. It employs a PWM dimmer for regulating lamp brightness by ensuring a controlled reduction in voltage. Requiring merely simple installation, this powerful item is surely a great one to use. 	 Module with a PWM dimmer. 	 Ensures a controlled reduction in voltage. 	 Enables regulated brightness. 	 Powerful and easy to install. 	 High performance and low maintenance. 	 Assists in energy control easily. 	 Input: 10-28V DC &gt; 800mA. 	 Output: 1-6 LED. 	 Max. 700mA (Vin &gt; VLED = 2V).  

XLD Eco-Dim DC-DC Dimmable LED Module

DONGGUAN DEQIAN ELECTRONICS CO., LTD

compact min portable handheld fan

CIXI LESHENG ELECTRICAL CO.,LTD

    Lesheng Electrical Appliances co..Ltd, AC charging pile is a piece of charging equipment developed to meet thecharging needs of new energy vehicles and is used in conjunction with electric vehicleon-board chargers to provide slow charging services for electric vehicles.This product is easyto install,portable,easy to operate,has a fashionable appearance,and is suitable for privateparking garages,public parking lots,residential parking lots,enterprise parking lots,and othertypes of open-air and indoor parking lots.Because this product is high-voltage equipment,please do not disassemble the shel or modify the wiring yourself.This charging pile adopts anintelligent type,with timing,electricity metering,optional charging,and a human-computerinteraction interface.    

3.5 kW AC  Portable Dis Charging Gun

Guangdong TND new energy technology Co., LTD

🌟 Key Product HighlightsDual Power Options: 80KW / 180KW output, compatible with most electric vehicles on the marketFast Charging: 200A/300A output current, charges EVs from 0-80% in ~30-60 minutesRugged &amp; Reliable: IP54 protection, operates in -25°C to +50°C extreme environmentsSmart Management: OCPP 1.6 protocol, OTA remote upgrade, real-time equipment monitoringUser-Friendly: 4.3-inch color LCD display, card swiping &amp; QR code payment options📊 Technical SpecificationsSpecificationDetailsShell MaterialSheet metal + tempered glassCharging InterfaceIEC 62196 Type 1Output Current200A / 300AMax Power80KW / 180KWInput VoltageAC 380V ±15%Output VoltageDC 200-1000VCable Length5MProtection LevelIP54Operating Temperature-25°C ~ +50°CNumber of Interfaces2Communication ProtocolOCPP 1.6Payment MethodsCard swiping / QR code scanning🔒 Safety &amp; Protection FeaturesOur DC charging pile is built with comprehensive safety mechanisms to protect both the charger and your vehicle:Over-voltage / under-voltage protectionOver-load / short-circuit protectionGrounding / over-temperature protectionLightning protection &amp; emergency stop functionLeakage protection for maximum safety🧠 Smart Management FunctionsOTA Remote Upgrade: No on-site maintenance needed for firmware updatesEquipment Monitoring: Real-time status tracking &amp; fault diagnosisLCD Display: Clear user interface for charging status &amp; pricingData Communication: Seamless integration with back-end management systemsIntegrated Card System: Supports membership cards &amp; payment card integration🛡️ Why Choose Our DC Charging Pile?Commercial-Grade Durability: Designed for high-traffic public charging scenariosWide Compatibility: Works with all IEC 62196 Type 1 electric vehiclesEasy Operation: Intuitive interface for end-users, simple management for operatorsFuture-Proof: OCPP 1.6 protocol ensures compatibility with global charging networks📦 Package Includes1 x 80/180KW DC Charging Pile2 x 5M charging cables with Type 1 connectorsMounting hardware &amp; user manual1-year manufacturer warranty⚠️ Important NotesProfessional installation required (input voltage: AC 380V)Suitable for commercial use only (not for residential home charging)Please confirm your vehicle's charging interface compatibility before purchase

DC 80/180KW Charging Pile EV Charger

Modular Lighting System 48V combines unornamented aesthetics with a multitude of configuration options and effortless installation. The outcome is an ecosystem of quality components perfect for spaces where constant flexibility and high performance are required.  

DC.TF0403-1

DC TF0403 1 Modular Lighting System with flexible configurations

Linkchamp Co Ltd

DC to DC Buck/Boost Converter 12/24/48V 10~50A https://www.dc-ac.com/product/new 10~50A Intelligent DC-DC® Boost Converter 12V to 24V 10~40A Intelligent DC-DC® Buck Converter 24V to 12V 5~15A Intelligent DC-DC® Buck Converter 48V to 12V 5~15A Intelligent DC-DC® Buck Converter 48V to 24V 75W Intelligent DC-DC® 4-IN-1 Buck-Boost Converter 10~60V to 12V 

DC to DC Buck/Boost Converter 12/24/48V 10~50A

DC to DC Buck Boost Converter 12 24 48V 10 50A

三煌电机制品有限公司

3 speeds: low, medium, highButton to switch on/offBattery: 3 x1.5V AA (Lr6)Size:96mm(w)x 47mm(d)x193mm(h)GB: 97mm(w)x 49mm(d)x198mm(h)Color: Black &amp; White

DCF-01 (Portable Fan)

DCF 01 Portable Fan with three speed settings

   Cixi Lesheng Electrical co.Ltd AC charging pile is a piece of charging equipment developed to meet thecharging needs of new energy vehicles and is used in conjunction with electric vehicleon-board chargers to provide slow charging services for electric vehicles.This product is easyto install,portable,easy to operate,has a fashionable appearance,and is suitable for privateparking garages,public parking lots,residential parking lots,enterprise parking lots,and othertypes of open-air and indoor parking lots.Because this product is high-voltage equipment,please do not disassemble the shel or modify the wiring yourself.This charging pile adopts anintelligent type,with timing,electricity metering,optional charging,and a human-computerinteraction interface.  

DC EV Charger

Our Power Station (Surface mount) with 2 x 13A BS socket with LED Strip Light and Dual USB Quick charger (USB-A and USB-C) is made from a high quality aluminium, housing a reinforced plastic module. With a unique design and stylish appearance, this station is suitable for installation for under cabinet in the home, office or any commercial property.  Input: 220-240V~50HzCombination contain:3 x 13A BS SocketDual USB Quick ChargerUSB-A Support : QC 3.0 Quick chargeUSB-C Support : QC 3.0 Quick charge and PD Quick ChargeSingle Quick Charge Output: DC 5.0V, 3.0A, 15.0W/ DC 9.0V, 2.0A, 18.0W/ DC 12.0V, 1.5A, 18.0W(According to different device, the smart circuit will auto detect and switch to 5V, 9V or 12V for quick charging performance)Dual USB Charge Output : Total Max. DC 5.0V, 4.0A, 20.0WOVC IIILED Strip LightLamp type: SMD LEDWattage: 6WLumen: 424lmLED colour: WarmwhiteConstruction: Aluminium casingManufactured to CE, BS and RoHS standardsMeets all UK and EU Regulations  Features: Suitable for Kitchen, Office, Hotel and Club HouseMost of the Tablet, Smartphone, Laptop (below 30W) or Electronic Device can be charged simultaneouslFull fitting instructions for simple installationPacking included mounting screwsCable 2M with BS Plug #powerstation, #powersocket, #surfacemount, #desktoppowerstation, #powerstationwithlight, #flexiblesurfacemount, #safepowersocket, #usbcharger, #superiorsafety  

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?