保迪安兴盛实业有限公司

	It is an auto-dialer alarm control panel with 8 hardware protection zones and 2 software zones for panic and duress alarms.	It is suitable for home and office protection.	When alarm occurs, it can send voice message up to 4 preset numbers and gives local alarm warning.	The system comes with one alarm control panel and one full feature master control console.

8-Zone Dialer Alarm

HA 268 auto dialer alarm control panel for home and office

ZHONG SHAN MARVEL SMART LED CO., LTD.

32-bit staircase controller, with a step-by-step illumination effect after realistic sensing 

32 STEPS STAIR CONTROLLER

HA-278 is an 8+16 zone alarm control panel that comes with auto-dialer and communicator. The dialer sends voice message / SMS to four preset telephone number and communicator has two channels for sending alarm reports to two stand alarm monitor stations of Contact ID format.The protection zones and the alarm output facilities are compatible with most of the sensors and output devices on the market. HA-278 is expandable to 24 zones; it is ideal security system for business and residential protections.HA-278 is not app controlled. End-user can remote arm, disarm and checking alarm status on their mobile phone. Here are the QR code for the app control. Welcome to download the app to learn more.Features for HA-278 Alarm 8+16 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingCompatible to HX-2716 16-Zone ExpanderContact ID®Format Communicator, For Communication to MS-270 Monitor StationLCD Display Easy Programming KeypadProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC / 24VDC OperationWeight: 2.2 Kg (The Control Panel); 250 g (The Keypad)Dimensions: 268(H) X 263(W) X 78(D) mm (The Control Panel); 125(H) X 188(W) X 23(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable SMS Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel

HA 278 Alarm Control Panel with auto dialer and communicator

A-263D &amp; HA-263K is a high performance local alarm control panel with 8 hardware protection zones in two partitions. The main advantage of it is all the main features are accomplished by direct jumper settings on the main circuit board. It is absolutely simple to set up and no learning is required. It is an ideal system for both “Do-It-Yourself” and professional users.The system is designed with two partitions in one enclosure. The two partitions are independently controlled for arm-disarm just like two alarm control panels, which gives the maximum flexibility for users convenience and protection arrangement. The lobby protection zone in the Common Partition is armed while both partition 1 and 2 are armed to give maximum protection; and it is disarmed while one of the partition is disarmed. This allows either partition to arm, while leaving the lobby for access into the other partition.The HA-263D comes with a Digital Keypad for arm-disarm control with user codes, which also offers additional features via programming through the keypad. The system can also work with key-switch and digital keypad in mixed operation.The HA-263K comes with one Key Switch Control Station for combined arm-disarm control of the whole system. Independent control of the two partitions requires two key switch control stations. The system can also work with key-switch and Digital Keypad in mixed operation. Features: Arm-disarm Controlled by Digital Keypad8 Zones in Two PartitionsIndependently Programmable User Codes for Partition 1, 2, &amp; The Whole SystemUser Codes Can Be 4-6 DigitsProgrammable Time for Entry Delay and Alarm DurationEach Protection Zone is Independently Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual TestingOn Board Software Zone for Panic AlarmsMaximum 4 Control Keypads or Key Switches Can Be ConnectedHome or Away OperationForced to Arm with The Faulty Zone(s) BypassedHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile Memory12V / 6.5Ah Back-up Battery (Not Included)16.5VAC OperationWeight: 2.5 Kg (The Control Panel &amp; The Keypad)Dimensions: 270(H) X 265(W) X 78(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad)

Alarm Control Panel with dual partition and programmable features

Highlighted here is a dual output full feature tri-tech keypad with card reader function. It has buttons for 0-9, *, #, and is combined with a proximity EM card reader in one unit. This keypad provides secure access control and is suitable for residential and commercial applications.
<ul>
	<li>Self-contained two output relay keypad.</li>
	<li>Vandal resistant and weatherproof.</li>
	<li>Digital keypad with buttons for 0-9, *, #.</li>
	<li>Combined with a proximity EM card reader in one unit.</li>
	<li>Dual output vandal resistant full feature tri-tech.</li>
	<li>Provide secure access control.</li>
	<li>Suitable for residential and commercial applications.</li>
</ul>


Keypad

Zhuhai Ltech Electronic Technology Co., Ltd

LTECHsuper panelSMART HOMESP-GW-12SWholehouseintelligenceis easy to control the devices and scenes in the toom with just one step. 

Super panel SP-GW-12S

Super panel SP GW 12S for smart home control

Featured here is a weatherproof, self-contained, mullion mount compact keypad loaded with the Tri-Tech MK-II operational software. It combines the functions of a digital keypad and a proximity EM card reader in one unit and can work in stand-alone mode. This keypad is expandable to work with the AR-2800 series auxiliary readers and keypads for multi-station operation. It is also compatible with the DA-2800 split-decoders to set up a high security access control system.
<ul>
	<li>Weatherproof, self-contained, mullion mount compact keypad.</li>
	<li>Loaded with the Tri-Tech MK-II operational software.</li>
	<li>Combine the functions of a digital keypad and a proximity EM card reader in one unit.</li>
	<li>Can work in stand-alone mode.</li>
	<li>Expandable to work with the AR-2800 series auxiliary readers and keypads for multi-station operation.</li>
	<li>Compatible with the DA-2800 split-decoders to set up a high security access control system.</li>
	<li>Slim rectangular shape.</li>
	<li>With keys for 0-9, *, # and doorbell.</li>
	<li>3 indicator lights.</li>
	<li>Excellent for residential and commercial security applications.</li>
</ul>


Digital Keypad Card Reader

Siqi Technologies (Shenzhen) Co.,Ltd

Surge series elegant and dynamic. The decorative panel in the middle extends the visual width, creating a boundless realm. The button design cleverly combines seawater ripples and ergonomics, presenting a romantic “visual illusion” in different light, flowing freely like waves. The knob is used to control volume, temperature, brightness, curtain opening and closing, etc., allowing space to encounter more inspiration. 

Surge Super Control Panel

Surge Super Control Panel for smart lighting and design

HA-266 is a compact auto-dialer alarm control panel with 6 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with a built-in full feature control console for ready installation.Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console.Features for Alarm 6 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 2 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 1.2Ah Back-up Battery (Not Included)12-16VDC OperationWeight: 1.2 Kg (The Control Panel); 220 g (The Keypad)Dimensions: 116(H) X 180(W) X 67(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel with auto dialer and multiple protection zones

DK-2823 MK-II is a self-contained three output relay Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2823A – Dual output surface mount keypadDK-2823B –Dual output surface mount keypad with door bell outputThe keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Three relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon rubber metal keytopSuitable installation on wallLED lighting control

RFID Access Control Keypad

DK-2891 MK-II<br>
&nbsp;<br>
​DK-2891 is a self-contained two output relay, vandal resistant and weatherproof keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad has been designed for stand alone access control applications. It is expandable to work with an optional decoder (DA-2800 or DA-2801) for high security split-decoded operation. The keypad is ideally for door strike and alarm arm-disarm controls. It is also a programmable industrial timer (from 1 second to over 24 hours) for automatic operator system. The DK-2891 has two versions. Version A comes with the Output Relay contacts 1 and 2 for door strike and auxiliary control respectively. The Version B comes with Output 1 for door strike and Output 2 for door bell activation.
<ul>
	<li>DK-2891A - Output Relay 1 , 2 Controlled by User Codes / Cards</li>
	<li>DK-2891B - Output Relay 1 Controlled by User Codes / Cards; Output 2 by Bell Button</li>
	<li>Operating Voltage: 12V DC Nominal; 11-15V DC</li>
	<li>Operating Current: 60mA (quiescent) to 100mA</li>
	<li>Operation Temperature: -20°C to +70°C</li>
	<li>Environmental Humidity: 5-95% relative humidity non-condensing</li>
	<li>Working Environment &amp; Ingress Protection: Indoor or Outdoor, IP-65 Weatherproof</li>
	<li>Proximity Card: Standard EM Card or Key fob, 125Khz</li>
	<li>The Timer: 1-99,999 Seconds (Over 24 Hours possible) Programmable Timer for O/P 1</li>
	<li>Egress Button: Programmable for Instant, Delay with Warning and/or Alarm Momentary or Holding Contact for the Exit Delay</li>
</ul>


Digital Keypad

Jiangsu Insona Communication Technology Co., Ltd.

This product is a multifunctional scene panel with built-in Bluetooth chip, which supportssingle device, group, and scene control without a gateway. The device itself is poweredby 110V-240V power and comes with 4 relay load outputs. The panel supports 4 button，5 button and 6button combinations, with backlighting. It supports click, and long press operations, andlinkage with lighting, curtains, or other devices within the inSona system. 

inSona  LJ series scene panel

    Output relays for door lock &amp; door bell.    Stand alone door lock operation.    Simplified version of the DK-2862/DK-2866.    Available with touch sensing or tact-switch keyboard.    Operation environment &amp; ingress protection: all weather, IP55.    Weatherproof ABS plastic housing in black color.    Weight: 200g.

DK-9520 is a single relay output keypad. It is a simple function keypad with easy programming method. The keypad has two operation mode, which is Single-User Mode and Multi-User Mode. The keypad compatible with two operation modes: (1) Single-User Mode –Simply require only one each user code for door open. One Code Mode. (2) Multi-User Mode –Up to 100 user code for door open. The code can have length of 4-8 digits for higher security. Features: Single relay output for door lock and equipment controlOptional single or multi-user modeDifferent levels of user code modeVisitor code programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon rubber keytopSuitable installation on wall

Simple Access Control Keypad

Simple Access Control Keypad for secure door entry

    The DK-2810 is an economy self-contained single relay output slim keypad.    It combines the functions of digital keypad and proximity EM card reader in one unit designed for stand alone operation.    It is an ideal keypad mainly for door strike in access control or arm-disarm control of an alarm system.    It can also be a programmable industrial timer (with the timing of 1 second to over 24 hours) for automatic operator systems.Main features of DK-2810:    Stand alone electric lock in access control.    Compatible with fail-secure or fail-safe electric lock.    1,000 user pins and / or cards.    50 visitor codes programmable for one time; or valid for 1 to 99 hours.    Over 100 million combinations for user pins.    Super user code operates output relay, also makes system inhibit or resets inhibit.    Programmable intelligent egress button controls “going out” with delay, Warning and button contacting manners of momentary or holding contact.    Common user pin, group user pins &amp; private user pins for working with the EM card for various levels of security enhancement.    On-off selectable for pacifier tone, standby flashing LED.    Output relay 1 N.C. &amp; N.O. dry contacts, 5A / 24VDC maximum.    Extremely long programmable timer for output relay; 1 second to over 24 hours.    Tamper switch N.C. dry contact; 50mA / 12VDC.    Door bell button N.O. dry contact; 50mA / 12VDC.    Operating voltage: 12VDC nominal; 11-15VDC.    Operating current: 40 (quiescent) to 90mA (relay active).    Environment temperature: -20°C to +70°C.    Environment humidity: 5-95% relative humidity, non-condensing.    Operation environment &amp; ingress protection: indoor only, IP-50.    ABS plastic housing.    Weight: 180gs.    Dimensions: 117 (H) x 117 (W) x 21 (D) mm.    Specifications are subject to change for modifications without notice.    Status: in mass production.

Digital Access Keypad

广州瑞晶贤力信息科技有限公司

EXOcompactArdo freely programmable controllers Small and compact controller with different types of communication, with or without built-in display. EXOcompact is equipped with various communication ports. Therefore it can either act as a stand-alone unit or be integrated with Arrigo BMS or other SCADA systems. User-friendly tools are available for flexible handling and easy access via the web server. Technical data Supply voltage ：24 V ~ (21…27 V ~ 50…60 Hz) / 20…36 V DC (not XCA20...) Power consumption：4 VA Protection class ：IP20 Ambient humidity ：Max. 95 % RH Ambient temperature ：0…50 °C Storage temperature ：-20…+70 °C Operating system ：EXOrealC Battery backup ：Memory and real-time clock, at least 5 years Mounting ：DIN-rail Number of modules ：8.5 Dimensions, external (WxHxD) ：149 x 121 x 58 / 149 x 136 x 58 (XCA20…) mm Communication ports Ethernet ：EXOline-TCP/IP, Modbus-TCP, BACnet/IP RS485 ：EXOline, EFX, Modbus-RTU, M-Bus (through X1176) M-Bus ：M-Bus Mini-Master I/O data Analogue input a (AIa) ：PT1000, 0…10 V, 0(4)...20 mA (requires external 10 or 500 Ω shunt), 0...200mV, DIN Ni1000, LGNi1000, 12 bits A/D Digital input a (DIa) ：24 V DC, floating contact, powered from +C (24 V DC) Digital input b (DIb) ：Sourcing input type, GND is ref (only available for XCA20…) Universal input a (UIa) ：AIa or DIa (see specifications above) Condensation input a (CIa) ：Input dedicated for Regin’s condensation detector KG-A/1 Analogue output a (AOa) ：0…10 V DC, max. 5 mA, short-circuit protected Digital output b (DOb) ：Mosfet output 24 V AC, max. 2 A, total max. 8 A +C output ：24 V DC, 0.15 A, short circuit-protected (not available for XCA20…) Material Material, housing ：Polycarbonate, PC   

REGIN EXOcompact Ardo freely programmable controllers XCA152DW-4  XCA152W-4 XCA153W-4 XCA203W-4 XCA282W-4

REGIN EXOcompact Ardo freely programmable controllers

DK-2821 MK-II is a self-contained single output relay Keypad. It combines the digital keypad and proximity EM card reader in one unit. The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Single relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchBack-lit silicon rubber metal keytopSuitable installation on wall

Access Control Keypad with Card Reader

DK-2836A/B MK-II is a self-contained dual output relay, vandal-resistant and weatherproof Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2836A– Dual output surface mount keypad DK-2836B–Dual output surface mount keypad with door bell output The keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Dual relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansionDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopSuitable installation on wall

深圳中电投资有限公司

  with white STN LCD display  Resistance type touch screen with steam temperature and time adjustable  comes with a lamp, fan, FM radio and alarm function remote control  

Steam cabin control system

Steam cabin control system with adjustable steam temperature

Featured here is a self-contained digital access control keypad designed for standalone electric locks operating with 12V DC power supply. It uses a 3amp solid state output contact and is virtually compatible with any fail-safe or fail-secure electric locking devices. This keypad flaunts field proven reliability and is a cost-effective solution for residential and commercial installations.
<ul>
	<li>Self-contained digital access control keypad.</li>
	<li>Designed for standalone electric locks operating with 12V DC power supply.</li>
	<li>3amp solid state output contact.</li>
	<li>Virtually compatible with any fail-safe or fail-secure electric locking devices.</li>
	<li>With buttons for 0-9, *, #, and doorbell.</li>
	<li>With 3 indicator lights for mains, door and inhibit.</li>
	<li>Field proven reliability.</li>
	<li>Cost-effective solution for residential and commercial installations.</li>
</ul>


Security Access Keypad 

Dual function device combines with Cellular Dialer and Gate Opener in one unit. Compatible with all Alarm Control Panels and Access Control Keypads and gate openers.

Cellular Dialer + Gate Opener

Cellular Dialer Gate Opener with advanced alarm features

	DK-2862 is a touch sensing full feature access control keypad combines with EM card reader.	It employs Tri-Tech operation software that compatible with split-decoder and auxiliary keypad/readers for high security split-decoded and multi-station operations.

Touch Sensing Access Control Keypad

32-bit Bluetooth staircase controller, can be controlled through a mobile app, with customizable adjustment modes 

BLUETOOTH  32 STEPS STAIR CONTROLLER

DK-2851 MK-II is a self-contained three output relay, vandal-resistant and weatherproof Keypad. It combines the digital keypad and proximity EM card reader in one unit. DK-2851A – Three output surface mount keypadDK-2851B –Three output surface mount keypad with door bell outputThe keypad compatible with three operation modes: (1) Stand-Alone Mode – Keypad and Electric Lock (2) Multi-Station Mode – Keypad, Auxiliary Keypad and Electric Lock (3) Split-Decoded Mode – Keypad, Split Decoder and Electric Lock In these three-operation modes, split decode has the highest security protection for home and office. Features: Three relay output for door lock and equipment controlBuilt-in real-time clock for inhibition modeOptional multi-station, split-decode for expansion26-bit, 34-bit or 37-bit Wiegand data outputDifferent levels of user modeInterlock for dual keypad installationDuress and alarm output for external deviceVisitor password programable with timeOutput relay change be toggle or time modeBuilt-in tamper switchVandal-resistant weatherproof with back-lit metal keytopSuitable installation on wall or mounting on gooseneck post

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?