广州威绰商品检测技术服务有限公司

During container loading supervision (CLS), V-Trust&#39;s inspector monitors the loading process, verifying product quantity, container condition and ensuring the proper handling of your cargo. Quality spot-checks are performed before loading to ensure your order meets your standards. However this examination is not as detailed as a Pre-Shipment Inspection.

Container Loading Supervision

Amit Lakshmi Sai Manufacturing

FindChinaSuppliers Here — HKTDC Online Marketplace, BestSourcingSolution For Buyers. Smart &amp; Reliable. Check out our suppliers fromChina, Hong Kong or asia.  sourcing products from china / asia  contact us now --  https://capsfactory.weebly.com/ https://newbagsfactory.weebly.com/ https://newbagsfactory.weebly.com/  

shipping agents, container shipping 

Guangdong Aoheng Environmental Protection Technology Co., Ltd.

1. The evaporation operation of several evaporators running in series makes the steam heat energy be used many times, so as to improve the utilization rate of heat energy, which is mostly used for the treatment of aqueous solution. In the process of three-effect evaporation operation, the first evaporator (called the first effect) takes the raw steam as the heating steam, and the other two (called the second effect and the third effect) takes the secondary steam of the previous effect as the heating steam, which can greatly reduce the amount of raw steam.  2.process - Characteristics The system is equipped with an efficient foam removal device to avoid material foam entrainment leading to material run-out. Adopt level automatic control system, automatic feed, automatic discharge of condensed water. Heater, preheater and condenser tube plate adopt integral tube plate to extend the service life of the equipment. Discharge using separation device, increase the discharge crystal content, after separation to obtain most of the crystal, mother liquid reflux is little, need to consume less heat energy, special energy saving. Forced circulation evaporation, which has the advantages of high heat transfer coefficient, evaporation strength, prevent wall and tube blocking, especially suitable for the evaporation process of crystal materials. The separator adopts DTB mode to effectively separate the turbid liquid and avoid the crystal entering the heat exchange tube. The pump self-circulating system is adopted to keep the crystal and mother liquid circulating at all times and avoid crystal deposition and pipe blocking.  3.case Project Name: Guangzhou XXXX Co., LTD Address: Guangzhou Processing scale: 6T/h Process flow: Physicochemical + biochemical +MBR system + roll RO+DTRO+ multi-effect evaporation Inlet water quality: COD≤20mg/L; Conductivity ≤1900us/cm Effluent standard: "Industrial Water Quality of Municipal Sewage Recycling" GBT19923-2005  The price is negotiable 

Multiple effect evaporator

multiple effect evaporator for efficient aqueous solution treatment

MVR evaporator, short for mechanical vapor recompression. MVR is a technology that reuses the energy of its own secondary steam, thereby reducing the need for external energy. The secondary steam is compressed by the compressor, the pressure and temperature can be increased, and the enthalpy increases accordingly. It is sent to the heating chamber left for evaporation as the heating steam, namely the steam, so that the material liquid can maintain the evaporation state, and the heating steam itself will transfer the heat to the material and become condensed into water. In this way, the steam originally to be discarded is fully utilized, the latent heat is recovered, and the thermal efficiency is improved. The price is negotiable 

Evaporator - MVR

Evaporator MVR for energy-efficient mechanical vapor recompression

 	 During container loading supervision (CLS), V-Trust&#39;s inspector monitors the loading process, verifying product quantity, container condition and ensuring the proper handling of your cargo. 	 Quality spot-checks are performed before loading to ensure your order meets your standards. 	 However this examination is not as detailed as a Pre-Shipment Inspection.  

Foundstate Industrial Co., LTD

Liquidplus

Demeter Green Ltd.

This is a miniature, light weight and cost effective design vacuum dehydration unit.It can applied directly to various types of machines reservoirs. ldeally suited forsmall volume system between 1000L to 3000L of lubricants fluid. lt dehydrate andcleans most types of oil such as lubricants fluid, hydraulic oil, transformerfluid,quenching oil and synthetic fluid. The system design is a fully automaticprocess through PLC control and only manual action is needed to emptying thecondensate and waste waterin the container.  

VCC-M360

VCC M360 miniature vacuum dehydration unit

Q-Nitto Hong Kong Limited

METAL INJECTION MOLDING  Country of Origin： Taiwan  What isMetal injection molding: Metal injection molding (MIM) is a metalworking process by which finely-powdered metal is mixed with a measured amount of binder material to comprise a "feedstock" capable of being handled by plastic processing equipment through a process known as injection mold forming.  Advantage to Client： ①The molding process allows complex parts to be shaped in a single operation and in high volume. ②Ability to mold metal texture comparable to plastic. ③Using a mould allows low cost mass production to be capable. ④Can avoid additional processing for lower the production cost. lathe etc. ⑤Able to produce horizontal holes and deep holes that die casting cannot make. ⑥The variety of metals capable of implementation within MIM feedstock are referred to as powder metallurgy, and these contain the same alloying constituents found in industry standards for common and exotic metal applications.  Made in Taiwan： ①Lower the Processing Cost.　　　　　　　 ②Stablize the product quality.　　　　　　　　 ③Capable of small to mass production.　　　  　  　　 ④Consistent production process.　　　  　  　　 ⑤High Completion of Infrastructure and highly unaffected by political unstability.  ※References：WIKI         

Metal injection molding products

美特(中国)有限公司

Moisture and Thermal Tracer (Dual Moisture Sensor) - MS-WITC3MT - Thermal object / surface temp.- Auto trace Hot / Cold leaks- Distance measure- Pin type surface moisture measure- Pin type Relative Surface Trace (RST) moisture- Relative Penetrate Trace (RPT) moisture - Wide applications and enable 24/7/365 continuously monitor, real time snap and store pictures with data measured into micro SD card / through hot spot of Smartphone or WiFi router connection to PC / Tablet / Smartphone. 

Moisture and Thermal Tracer

Moisture and Thermal Tracer for real-time monitoring

Cambi

Cambi THP is also widely used for treating sludge and/or organic waste (biowaste) to further improve digestion performance in efficiency, compact digesters, biogas production, and better biosolids quality by fully pathogens kill. Cambi has experience in THP for sludge treatment alone, for organic waste treatment alone, and for co-digestion of sludge and organic waste in Europe (Norway, Sweden, Denmark) and Asia (South Korea, China). Cambi THP co-digestion provides one plant for treating two types of substrates, contributing to waste treatment, bio-energy production, and bio-resource recycling for circular economy and reduction in GHG emission  

Thermal hydrolysis process

Cambi THP for efficient sludge and organic waste treatment

AEL (International Holdings) Ltd

廚餘再生俠是我們廚餘預處理系統，通過機械和生物技術將廚餘轉化為漿液 (有機顆粒懸液)，然後漿液會被儲存在一個封閉的漿液缸中，再由吸缸車收集並運輸到進一步處理的設施。系統在香港研發，致力於透過簡化廚餘投放和運輸以提高香港廚餘的收集和回收率。 

Food TranSmarter 廚餘再生俠 

Food TranSmarter for effective food waste recycling

Guangzhou Shangjie Environmental Protection Technology Co. , Ltd.

The carbon-based multiphase catalytic oxidation treatment technology can be used for waste gas treatment in industries such as plastic manufacturing, rubber processing, synthetic fiber production, fine chemicals, daily chemicals, chemical pharmaceuticals, biopharmaceuticals, pesticide manufacturing, fertilizer production, textile printing and dyeing, industrial sewage treatment, and food processing. The pollutants that can be treated include VOCs pollutants such as hydrocarbons, benzene series, alcohols, esters, and halogenated hydrocarbons, as well as odorous substances such as ammonia, hydrogen sulfide, trimethylamine, methyl mercaptan, and dimethyl sulfide. It is particularly used for the treatment of odorous organic waste gases with multi-component heteroatoms.  

(Clone) Multiphase Catalytic Oxidation Treatment System for Odorous Waste Gas / VOCs Organic Waste Gas

Multiphase Catalytic Oxidation Treatment System for Odorous Waste Gas

King Marketing Limited

47623

(Clone) (Clone) Multiphase Catalytic Oxidation Treatment System for Odorous Waste Gas / VOCs Organic Waste Gas

Wireless Connectivity Moisture / Thermal / AC leakage Tracer MS-WITC3MT1 7 in 1 functions Thermal object / surface temp.Auto trace Hot / Cold leaksDistance measurePin type, surface moisture measurePin type, Relative Surface Trace (RST) moistureRoller sensor, Relative Penetrate Trace (RPT / DPT) moisture to find seepage sourceDetect AC leakage on wall; ceiling, floors etc. Features: Thermal / Visual CameraTriple Object Temp. Meas.Dual Mode Wifi ConnectivityMonitoringTemp. AlarmCompatible External SensorAuto capture seepage waterDetect AC Leakage on walls etc.32GB micro SD Card StorageAuto trace Hot / Cold leaksRemote ControlDate / TimeData Logger MS - WITC3MT1 can be compatible with MEET External Sensor Series that have wide applications. Remote Moisture Probe (Optional) MS-AMP0206Hammer Probe (Optional) MS-EHPWall Cavity Probe (Optional) MS-EWCPBaseboard Probe (Optional) MS-EBPDeep Wall Moisture Probe (Optional) MS-AMP0207 

Wireless Connectivity Moisture / Thermal / AC leakage Tracer

Wireless Connectivity Moisture Thermal AC leakage Tracer

Ferrari Logistics ( Asia ) Ltd

 	 1. &nbsp;Global / domestic transportation and hand-carry services for jewerlly &amp; luxury 	 2. &nbsp;Security &amp; guarding services 	 3. &nbsp;Warehousing services 	 4. &nbsp;Quality control services 	 5. &nbsp;Global/private events 	 6. &nbsp;Insurance 	 7. &nbsp;Fine art services  

Forwarder

Forwarder for global and domestic transportation services

香港祥莱股份有限公司

Removes 60 liters of moisture per day (30℃, 80%RH)Small and light design with efficient performanceRotational molding housingHot gas bypass for low temperature defrostBuilt-in sensors monitor RH and temperatureElectrical control, auto-restart when power failureOperating running hour counterLGR system availableFaster maintenance by removing entire housing easily, front bracket for convenient storageDroppable air filtersRemovable strong 300MM EVA tires for easy of mobility and goodbalance when being wheeled up stairsSelf drainage and automatic pump outQuick disconnect coupling for drainage pipe connected easily and fastStackable for space savingPatented designOptional:Mechanical control systemLoading Quantity: 20GP/40GP/40HQ: 143/287/288PCS 

Commercial Dehumidifier  XTRACT  

Commercial Dehumidifier XTRACT removes 60 liters of moisture daily

NEW STAR ENERGY LIMITED

MARS II 7in1 Commercial ESS

HQTS Group Ltd

 	 We provide a wide range of testing services to help you to achieve regulatory and legal compliance globally. 	 Our testing covers textile and garments testing, toys and children products testing, footwear and clothing testing, household products testing, glass and ceramic testing, candle testing, and ISTA package testing, etc.  

Testing

Testing services for regulatory and legal compliance globally

新田商标印刷厂有限公司

Make sure your customers don&rsquo;t ruin their newly bought clothes from your company by using this heat transfer care label. This label includes information like care label symbols, materials and more, so your customers can know how to handle the garments properly. Unlike traditional sewn-in labels, this one is effortlessly transferred by heat, so there would not be label edges that irritate users with sensitive skin. Let your consumers know all crucial information without the annoying sensation by employing this heat transfer care label.&nbsp; 	 Material: heat transfer.&nbsp; 	 Features your brand name, logo, size, materials, care label symbols, country of origin and serial number.&nbsp; 	 Processed with screen print.&nbsp; 	 Can be easily transferred to garments with heat.&nbsp; 	 Avoid harsh edges that irritate sensitive skin. 	 For all clothing manufacturers and designers.&nbsp;  

Heat Transfer Care Label

Heat Transfer Care Label for easy garment care instructions

This technology, developed based on advanced oxidation scrubbing (ZL2011205321585, Integrated Device for Treating Organic Waste Gas by Advanced Oxidation Scrubbing, authorized on August 15, 2012), incorporates carbon-based catalysts and active oxygen molecule technology, overcoming the limitations of advanced oxidation scrubbing and forming a novel multiphase catalytic oxidation treatment technology for odorous/VOCs waste gas. 

(Clone) Multiphase Catalytic Oxidation System for Malodorous Organic Waste Gases

Multiphase Catalytic Oxidation System for Malodorous Organic Waste Gases

Model No. : Automotive Turbocharging Parts Material : SUS316L Purpose : Use for Automobile transmission turbine steam pressure Size : L132.6mm x H9.8mm OEM? : Yes, can add logos  MOQ : 2,000pcs SPQ : 100pcs   

Axis (Automotive Turbocharging Parts)

MGM Industries & Company

Multi-Position Magnetic Stirrer

Multi Position Magnetic Stirrer for scientific research and extraction

Hong Kong Shindo Ltd

Guaranteed to elevate your design and project.Customized sizes and colors.For price information, please contact us directly.

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?