Zhejiang Zhaolong Interconnect Technology Co Ltd

Optical fiber performance meets 10 Gigabit multi-mode OM3, OM4; zero water peak single-mode OS2 optical cable jacket flame retardant grade meets low smoke and halogen-free or UL (OFNR, OFNP) and other high densityminiaturizationImported high-precision connector assembly, resistant to insertion and removal, low loss, good interchangeability, high-quality optical fiber ribbon, excellent optical performanceComponents are fully ground and 100% performance tested to ensure high-quality optical performanceA single bar can support 12~144 core capacity, save cabinet space length, jacket flame retardant level can be customized, plug and play structure, greatly reduce network management and maintenance costs, use high-quality environmentally friendly materials, meet RoHS requirements OPTICAL PERFORMANCE Typical insertion loss:                ≤ 0.50 dB(MPO Single mode/multimode) ≤ 0.30 dB(LC Single mode UPC) ≤ 0.20 dB(LC Single mode APC) ≤ 0.20 dB(LC multimode PC) Maximum insertion loss:              ≤ 0.35 dB(MPO Single mode/multimode) ≤0.15 dB(LC Single mode UPC) ≤ 0.20 dB(LC Single mode APC) ≤ 0.15 dB(LC multimode PC) Typical back reflection (single mode):     &gt;60 dB(MPO Single mode) &gt;20 dB(MPO multimode) &gt;50 dB(LC Single mode UPC) &gt;60 dB(LC Single modeAPC) &gt;30 dB(LC multimode PC) Minimum back reflection (single mode):  &gt;60 dB(MPO Single mode) &gt;20 dB(MPO multimode) &gt;55 dB(LC Single mode UPC) &gt;65 dB(LC Single mode APC) &gt;40 dB(LC multimode PC)  

MPO-LC fan-out jumper

MPO LC fan out jumper for high-performance optical fiber connections

10G SFP+ AOC is a high data rate parallel active optical cable. It uses high reliability 850nm VCSEL technology to overcome the bandwidth limitation of traditional copper cables. The transmission distance of OM3 multimode fiber can reach 150m.  

SFP+ 10G AOC

SFP 10G AOC high data rate active optical cable

Zhaolong OSFP (Octal Small Form Factor)-copper-assembly is embedded with eight high speed electrical lanes with 28G NRZ and 56G PAM-4 signaling protocols per channel, which can provide 200G( 8X 28G) and 400G(8X 56G PAM-4) total bandwidth to meet the needs FEATURES AND BENEFITSCompliant with IEEE 802.3cd (400GBASE-CR8) StandardCompliant with IEEE 802.3bj (100GBASE-CR4) StandardCompliant with IEEE 802.3by (25 Ethernet) StandardData Rate : NRZ 28G &amp; 56G PAM-4 Per Channel Total Bandwidth 400 Gbps(8X 56G PAM-4)Interface Compliant with OSFP MSALow Power Consumption &lt; 0.5W (Passive)Support Wire AWG : 32/ 30 / 28/ 27Support Length (Passive DAC) : 0.5- 3.0 MeterEEPROM Content follow CMIS Standard and can be customizedLSZH Products AvailableTARGET MARKET400G/200G Ethernet8x InfiniBand™ EDR,HDRFibre ChannelStorage, Switch, &amp; RAID SystemsHigh-Performance Computing (HPC)Network Interface Cards (NIC's)Telecommunication EquipmentData Center and Enterprise Storage Systems  

OSFP 400G to 8* SFP56 50G DAC

100G QSFP28 AOC refers to the optical transceiver at both ends of the optical cable to provide photoelectric conversion and optical transmission, transmission rate reaches 100Gb/s. And AOC is composed of two optical transceivers and one optical cable jumper. Features and Benefits Transmission data rate up to 25.3125Gbit/s per channelCompliant with QSFP+ MSA &amp; SFF-8665 standardCompliant with IEEE 802.3bj 100GBASE SR4Hot pluggable electrical interfaceDifferential AC-coupled high speed data interfaceOM3/OM4 Multi-mode optical fiber cable of up to 100m4 channels 850nm 25G VCSEL array4 channels 25G PIN photo detector arraySupports serial ID functionality thru EEPROMManagement Interface and digital diagnosticPower consumption&lt;2.5Wpower supply: 3.3VOperating temperature 0°C to + 70°CRoHS compliantTarget Market100Gbs EthernetInfiniBand FDR/EDRStorage, Switch, &amp; RAID SystemsHigh-Performance Computing (HPC)Network Interface Cards (NIC's)Telecommunication equipmentData center and enterprise storage systems 

QSFP28 100G AOC

QSFP28 100G AOC for high-speed optical transmission

Good Mind Industries Co., Ltd.

With more network devices connection at home or in SMB and also more usage of bandwidth for internet entertainment, the network needs higher speed and better performance. The 10GFESW-8M provides 8 multi-giga ports which support 10G/5G/2.5G/1G/100Mbps transmission rates for various network devices. Also, the 10GFESW-8M has auto-negotiation function to select the optimal speed for each connection. The 10GFESW-8M is an unmanaged switch, and the user could simply enjoy the fast connection without any support from the technician. 

8-Port 10Gbe Switch

8 Port 10Gbe Switch for high-speed network connections

OSFP to OSFP 400G DAC

SMT Hong Kong Ltd

Features           Multi-fiber termination of 4f,8f,12f &amp; 24f fiber Precision multi-fiber MT ferrule Push-pull latching Male and female connector type Bare &amp; ruggedized ribbon and mic round cable Insertion Loss ≤0.35dB(Singlemode) ≤0.7dB(Multimode) Operating temperature -40℃+85℃ Return Loss PC≥30dB APC≥50dB 

MPO multi fiber termination with precision connectors

Obsidian Strategics Inc.

A pair of E100 devices communicates over a 10 gigabit Ethernet wide area network (or WDM light path) through their optical ports. Each device connects to local InfiniBand infrastructure through 4X SDR InfiniBand ports. By handling the InfiniBand buffer credit extension, InfiniBand traffic is able to traverse the WAN without application-level consideration to flow control over the link. The buffer capacity allows normally very short reach InfiniBand to span any global network and maintain very high wire-speed efficiency. In addition to the 4X SDR IB port, two 10/100/gigabit Ethernet channels are also encapsulated over the WAN link - the E series devices do not process the Ethernet packets, which are merely passed to the remote side as if carried on a virtual cable. The local IP and Ethernet channels are independently processed. Over and above range-extension and native routing, Longbow E series features integrated in-line AES-256-GCM encryption and authentication. This transparent capability provides a 10Gbits/s, highly secure InfiniBand path between locations with no latency penalty, and no bandwidth penalty.
 
  Applications: Longbow E series devices are highly effective long distance bulk data transport solutions. 
  Completely bypassing TCP/IP stack tuning and flow control problems, native IB applications can simply move data over the WAN using RDMA transfers. 
  Sustained efficiency is very high, often above 95% of maximum over many thousands of miles. 
  The encryption and authentication functions are important to users with sensitive data to safeguard: medical data sets, financial services, and off-site replication. 
  Medical data sets: high resolution MRI scans can now exceed 1 Tbytes in size. DNA sequencers can generate many Tbytes per day. Patient confidentiality can prevent these large data sets from being moved without encryption. Financial services: high-frequency trading applications are extremely latency sensitive, and may benefit from zero-penalty strong encryption and authentication. 
  Off-Site replication: avoid encrypting at rest just to support use of an untrusted high-performance replication pathway. An equally important consideration is the control of access to the infrastructure itself. 
  Longbow E series provides high security without performance compromise. 
  Standard supplied optic transceivers. 
  Type: 1310nm LR XFP. 
  Connector type: duplex-LC SMF. 
  Raw bit rate: 10.3125 Gbits/s. 
  Wide area network interfaces: 
  Node type: host. 
  Physical layer: optical 10GBASE-LW/LR. 
  Ethernet payload: IPv4 or IPv6. 
  InfiniBand interface: connector: IB CX4 4X copper, SDR at 10Gbit/sec. 
  Node type: two-port switch. 
  Physical layer: InfiniBand architecture v1.1, with v1.2 powered port option. 
 

InfiniBand Range Extender

InfiniBand Range Extender for secure long-distance data transport

A pair of Longbow C400 devices communicates over 4, 2 or 1 10 Gbits/second WAN light paths at distances of up to 1,600km (1,000 miles), connecting locally to InfiniBand LAN infrastructure through 4X QDR, DDR or SDR InfiniBand (IB) ports. The Longbow C400 series devices report as two-port InfiniBand switches to the subnet manager - the fabrics at each end-point location unify into a single subnet. Longbow C400 devices perform buffer credit extension at the link level. When combined with up to four 10Gbits/second serialized optical data streams at the physical layer, they allow InfiniBand to reach much farther than any other technology. Since C400 series devices use a proprietary optical WAN encoding, they must be deployed in pairs, connected by direct light paths.
 
  Port 1 (LAN) QSFP supports 4X QDR, DDR and SDR InfiniBand LAN interfaces. 
  Port 2 (WAN) SFP+ supports four 10Gbits/second light paths. 
  Due to skew constraints between parallel optical WAN channels, it is recommended that C400s are deployed with CWDM WAN solutions, such as Obsidian's Rainbow C8 or Rainbow D9 devices, which were designed to carry multiple 4X QDR InfiniBand connections across a single fiber pair. C400 gracefully degrades InfiniBand port speeds if 10Gbits/second WAN channels are lost, for example QDR will degrade to DDR if one or two WAN links fail, and DDR to SDR if only a single WAN circuit remains. 
  Optics modules: type: SFP+ module (quad transceiver cage). 
  Connector: Duplex-LC. 
  Wavelength: (850, 1,310, 1,550nm, CWDM or DWDM; user provided). 
  Raw bit rate: 10.3125 Gbits/second per transceiver. 
  Optical interface: node type: two-port switch. 
  Physical layer: SFP+ specification. 
  Payload: IB link proprietary encoding. 
  Raw bandwidth: 40.0 Gbits/second max (QDR mode). 
  BER control: integrated high-gain FEC. 
  InfiniBand interface: connector: IB QSFP 4X, QDR at 32 Gbits/second (payload). 
  Node type: two-port switch. 
  Physical layer: InfiniBand architecture v1.2. 
  Subnet manager agent: integrated InfiniBand architecture v1.2. 
  VLs: 1 data and 1 management. 
  Port-to-port latency: 350ns (small packet store-and-forward). 
  Longbow C400 series ordering codes: C400: base chassis hardware with 300m range enabled without optics. 
  C400 license keys unlock required QDR link ranges: 10km, 40km, 80km, 400km, 1,600km link ranges are available as either annual or lifetime licenses. 
 

InfiniBand Range Extender for long-distance network connectivity

Crossbow R400-6 is a six-port InfiniBand router, supporting native routing between multiple InfiniBand subnets at full line rates and very low port-to-port latencies. Single subnets comprising just switches and HCAs have a single subnet manager and thus have a single LID space administrator, a simple topology and limited mechanisms for fault or control isolation. Crossbow enables a single InfiniBand fabric to span many subnets, providing many operational advantages. The ability to scale beyond a single LID space: a concern for very large InfiniBand installations. 

The potential to support many different subnet topologies (fat-tree, toroidal, mesh) in a single fabric without resorting to dropping out of InfiniBand to provide connectivity between them.
 
  Faster subnet manager operation (since the work is distributed across multiple subnet managers): again facilitating scaling. 
  Controlled inter-organizational InfiniBand connectivity without sharing management sovereignty or dropping out of InfiniBand fabric (particularly relevant when combined with Longbow wide area InfiniBand connectivity). 
  Fault isolation: very large systems need not be dependent on a single subnet's connectivity. Each of R400-6's six InfiniBand ports can belong to different subnets; the R400-6 providing InfiniBand specification-compliant GID-based routing between them. 
  Management: Ethernet: full duplex 10/100/1000 Base-T Ethernet with auto MDI-X. 
  Protocol support: IPv4, IPv6, HTTP/HTTPS, SNTP, DNS, ZeroConf and DHCP. 
  GUI: web based interactive management. 
  User management: single user account. 
  HTTP: SSL v2/v3 and TLS with HTTP digest challenge/response password exchange. Configuration: through web GUI or via a text configuration file. 
  Firmware: web upgradeable. 
  Primary/secondary high-availability flash storage with scrubbing. 
  InfiniBand interface: connector: IB QSFP+ 4X, QDR at 32Gbits/second (payload). 
  Node type: six-port switch or router. 
  Physical layer: InfiniBand architecture v1.2.1. 
  Subnet manager agent: integrated InfiniBand architecture v1.2.1. 
  GID routing entries: up to 65,536 (unicast) and up to 32,768 (multicast). 
  Port-to-port latency: 250ns (small packet store-and-forward). 
  Packet routing rate: up to 80 million packets per second per port. 
  VLs: 4 data and 1 management. 
 

Six-Port InfiniBand Router

Six Port InfiniBand Router for scalable networking solutions

UIT Data Storage Asia Ltd

Intel&rsquo;s third-generation 10 GbE controller, the Intel&reg; 82599 10 gigabit Ethernet controller continues to build on the innovative trends set by its predecessor. The Intel 82599 10 gigabit Ethernet controller is a single-chip, dual-port 10 GbE implementation in a 25x25 mm package. It reduces bill of materials (BOM) cost and design complexity by integrating serial 10 GbE PHYs and provides both simple firmware interface (SFI) and KR interface. The device is designed for high performance and lower memory latency. Wide internal data paths eliminate performance bottlenecks by efficiently handling large address and data words. With industry-leading power consumption, a small footprint, and integrated PHYs, the controller is ideally suited for server blades, LAN on motherboard (LOM), network interface card (NIC), and mezzanine card implementations. 	 Dual 10Gb SFP+ fibre channel over Ethernet ports. 	 PCI-e interface. 	 Single-chip, dual-port 10 GbE implementation in a 25x25 mm package.&nbsp; 	 Reduces bill of materials (BOM) cost and design complexity. 	 Integrating serial 10 GbE PHYs, provide both simple firmware interface (SFI) and KR interface. 	 Designed for high performance and lower memory latency. 	 Eliminate performance bottlenecks by efficiently handling large address and data words. 	 Industry-leading power consumption, small footprint, integrated PHYs. 	 Ideally suited for server blades, LAN on motherboard (LOM), network interface card (NIC), and mezzanine card implementations. 	 *Product photos posted here are for reference only, may vary to the actual product.  

Ethernet Network Adapter

Ethernet Network Adapter with Intel 82599 dual port technology

The Intel Ethernet converged network adapter X540 is the latest innovation in Intel&rsquo;s leadership to drive 10 Gigabit Ethernet (10 GbE) into the broader server market. This adapter hosts Intel&rsquo;s latest Ethernet silicon, the Intel&reg; Ethernet controller X540, which is used by many OEMs as a single-chip solution for LAN on Motherboard (LOM) to deliver 10 Gigabit Ethernet on the latest server platforms. 	 Dual 10Gb RJ45 cooper Ethernet ports. 	 PCI-e interface. 	 Full height and low profile. 	 For to driving 10 Gigabit Ethernet (10 GbE) into the broader server market.&nbsp; 	 Designed to host the Intel&reg; Ethernet controller X540 	 Used by many OEMs as a single-chip solution for LAN on Motherboard (LOM). 	 Deliver 10 Gigabit Ethernet on the latest server platforms. 	 *Product photos posted here are for reference only, may vary to the actual product.  

Ethernet Network Adapter for 10 Gigabit Ethernet connectivity

迅龙多媒体有限公司

 10G Ethernet PCI-Express Card 

Features &amp; Specification 	 Compliant with PCI Express Revision 3.0/2.0 	 PCI-Express 4-Lane(x4) interface 	 Supports line rate of 8.0GT/s and 5.0GT/s per lane 	 A high performance 10G BASE-T Ethernet controller card 	 Backward compatible to 5G/2.5G/1000/BASE-T /100 BASE -TX networking 	 100Mbps/1000Mbps/2.5Gbps/5Gbps/10Gbps data rate auto negotiation operation 	 100 meter over Cat 6a at 10Gbps, 100 meter over Cat 5e (or better) at 5Gbps / 2.5Gbps / 1Gbps 	 Compliant with IEEE 802.1ae / 802.3an/bz 	 Supports Wake-on-LAN(WoL) 	 Supports 16k Jumbo Frames 	 Supports Windows 10 / 8.x / 7 32 / 64-bit,&nbsp;Linux 3.2 and above  

PCI Express 10G LAN Card

 Dual 2.5G Multi-Gigabit Ethernet PCI-Express Card 

Features &amp; Specification 	 Supports two 2.5-Gigabit LAN ports on one card 	 Compliant with PCI Express Revision 2.1 	 PCI-Express 1-Lane(x1) interface 	 Supports standard and low profile chassis 	 Backward compatible to 1000, 100. 10 BASE-TX with auto-negotiation 	 Fully compliant with IEEE 802.3, 802.3u, 802.3ab 	 Supports full duplex flow control (IEEE 802.3x) 	 Supports IEEE 802.1P Layer 2 Priority Encoding 	 Supports IEEE 802.1Q VLAN tagging 	 Crossover Detection and Auto-Correction operation 	 Supports jumbo frame to 16K bytes 	 Supports Real WoW technology that enables remote wake-up of a sleeping PC through the internet
	&nbsp;Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) 	 Support system Windows 10 / 8.x / 7 / Vista / XP / 2000 / ME / 98SE / Server 2003-2008 32/64-bit, Linux, MAC OS, DOS 	 Default Packaging: White box with a product sticker  

PCI Express Dual 2.5 G Multi Gigabit LAN Card

PCI Express Dual 2 5 G Multi Gigabit LAN Card

Paxcomm

 	 Intelligent network monitoring switch 	 10GE 32 ports manageable  

Monitoring TAP

Monitoring TAP - Intelligent network monitoring switch with 32 ports

 	 Intelligent network monitoring switch 	 10GE 48 ports manageable  

Monitoring TAP - Intelligent network monitoring switch with 48 ports

 2.5G Multi Gigabit Ethernet PCI-Express Card 

Features &amp; Specification 	 Compliant with PCI Express Revision 2.1 	 PCI-Express 1-Lane(x1) interface 	 Supports standard and low profile chassis 	 Backward compatible to 1000, 100. 10 BASE-TX with auto negotiation 	 Fully compliant with IEEE 802.3, 802.3u, 802.3ab 	 Supports full duplex flow control (IEEE 802.3x) 	 Supports IEEE 802.1P Layer 2 Priority Encoding 	 Supports IEEE 802.1Q VLAN tagging 	 Crossover Detection and Auto-Correction operation 	 Supports jumbo frame to 16K bytes 	 Supports Real WoW technology that enables remote wake-up of a sleeping PC through the internet
	&nbsp;Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload(Large send v1 and Large send v2) 	 Support system Windows 10 / 8.x / 7 / Vista / XP / 2000 / ME / 98SE / Server 2003-2008 32/64-bit, Linux, MAC OS, DOS 	 Default Packaging: White box with a product sticker  

PCI Express 2.5 G Multi Gigabit LAN Card

OPTOMIND Inc.

 	 4-Channel Full-Duplex Active Optical Cable 	 Data Rate: Up to 100Gbps bi-directional 	 Cable Length: Up to 100m  

Cable

4 Channel Full Duplex Active Optical Cable

 	 Intelligent network monitoring switch 	 10GE 24 ports manageable  

Monitoring TAP - Intelligent network monitoring switch with 24 ports.

Shenzhen Glgnet Electronics Co., Ltd

This is an SFP connector with 12 ports. It is sturdily constructed to promise durability. This item is professionally designed to ensure reliable connection.
 
  2 x 6 SFP connector. 
  SFF-8431, MSA multilateral agreement, 
  Certification: IEEE 802.3ae. 
 

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?