广州瑞晶贤力信息科技有限公司

With demand-based control you can reach optimal comfort while minimizing energy consumption in sustainable buildings of the future. The Regio RCX room controller has a very flexible application for the installer that can configure almost every possible room application, without programming knowledge. It’s also installation-friendly with detachable bottom plate with terminals. Terminals are detachable to simplify measurement for maintenance. Controllers in different rooms and zones can be connected to a field bus enabling communication with a central SCADA system, via RS485 (BACnet, Modbus or EXOline).Regio RCX room controller also seamlessly integrates with our building management system Arrigo, our EXO-system range, as well as different sensors for a comprehensive solution. The stand-alone Regio controllers can easily be configured for a specific application via the Regin:GO app or Application Tool. 

Regin RCX-THCVP-D Regio RCX Smart Room Controllers 

Fan-coil thermostat with on/off outputs Electronic fan-coil thermostats for room temperature control. Automatic or manual changeover between heating and cooling. The thermostats have a function for 3-speed fan control (for fan-coil), a built-in temperature sensor, backlit display, and an input for a window contact or an occupancy detector. RCF-230CD* is BTL listed.  

REGIN RCF-230TD RCF-230CTD Fan-coil controller for thermal or 3-point actuators

REGIN RCF 230TD Fan coil controller for thermal or actuators

Comate (Hong Kong) Limited

Secondary oil and gas recovery treatment refers to the process of collecting the oil and gas generated when refueling vehicle fuel tanks into underground oil tanks through a sealed method. Due to factors such as complex refueling scenarios, high frequency of manual operations, massive data volume, and vulnerability to external weather and equipment interference, secondary oil and gas recovery has become a link in the oil and gas recovery process of gas stations that features high technical requirements, low recovery efficiency, and poor treatment effects. Its direct manifestation is the generally low qualification rate of the air-liquid ratio of refueling nozzles.The Oil and Gas Recovery Monitoring System developed by COMATE (HONG KONG) LIMITED integrates technologies such as oil and gas circuit flow measurement, air-liquid ratio controller, oil and gas circuit control valve, and central monitoring system. Based on the fueling volume of the refueling nozzle and the oil and gas recovery flow rate, it can control the oil and gas recovery volume in real time to ensure that the air-liquid ratio always meets the standards. Additionally, it centrally displays and stores the real-time and historical data of all fuel dispensers, realizing comprehensive monitoring of the oil and gas recovery system in gas stations, thereby helping to reduce VOCs (Volatile Organic Compounds) emissions.

The Vapor Recovery Compliance Monitoring and Control System

Vapor Recovery Compliance Monitoring System for gas stations

Fan-coil thermostat with on/off outputs Electronic fan-coil thermostats for room temperature control. Automatic or manual changeover between heating and cooling. The thermostats have a function for 3-speed fan control (for fan-coil), a built-in temperature sensor, backlit display, and an input for a window contact or an occupancy detector. RCF-230CD* is BTL listed.   

REGIN RCF-230D RCF-230CD Fan-coil thermostat with on/off outputs

REGIN RCF 230D Fan coil thermostat with on off outputs

Skyview Optical Company Limited

An Ultra-compact, High-performance and a full configurable unit 

NIDEK Compact refraction Unit

REGIN ExigoVido are controllers for heating and boiler control that make every step from installation to operation and maintenance easier than ever. Simply connect the controller, enter any settings as desired and start up. It can be used either stand-alone or integrated into a network. It has builtin support for many different languages and is designed for mounting on a DIN-rail, in a cabinet door or directly on a wall.  

REGIN HCV191DW-2 HCV192DW-2 HCV203DWM-2 ExigoVido – Configurable 230 V heating controller

REGIN HCV191DW 2 heating controller for easy installation and operation

EXOcompactEedo is a 230 V AC freely programmable controller. The controller provides builtin communication via EXOline, Modbus or BACnet for integration into Arrigo BMS or other SCADA systems. It can be used either as a stand-alone unit or as part of a larger system. The controller is well suited to act as a room controller and connects seamlessly to the room units in Regin’s ED-RU-… series. Technical data Supply voltage :230 V ~ (207…253 V ~ 50/60 Hz) Power consumption :11 VA without load, no display Protection class :IP20 Ambient humidity :Max. 95 % RH Ambient temperature :0…50 °C Storage temperature :-20…+70 °C Operating system :EXOrealC Battery backup: Memory and real-time clock, at least 5 years Mounting :DIN-rail Number of modules :8.5 Display :External (accessory) Dimensions, external (WxHxD) :149 x 121 x 58 mm Weight (incl. packaging) :0.37 kg Communication ports Ethernet :EXOline-TCP/IP, Modbus-TCP, BACnet/IP RS485 :EXOline, EFX, Modbus-RTU, M-Bus (through X1176) I/O data Analogue input b (AIb) :0…10 V DC Analogue input c (AIc) :PT1000 Digital input b (DIb) :Sourcing input type, GND is reference Condensation input a (CIa) :Input dedicated for Regin’s condensation detector KG-A/1 Analogue output a (AOa) :0…10 V DC, max. 5 mA, short-circuit protected Digital output_c (DOc) :Relay output 230 V AC, max. 3 A Digital output_d (DOd) :Triac output 230 V AC, max. 300 mA Digital outputs, total max. current (fuse) :6.3 A (6.3 AT 5 x 20 mm) Power output a (POa) :24 V DC, max. 50 mA Material Material, housing :Polycarbonate, PC Ethernet ports：1 RS485 ports:2 Display ：- AI : 3 DI: 3 CI: 1 AO: 4 DO: 5 ACCESSORIES ED-T70W:External touch display for controllers with web interface ED-T70W-2 :External handheld touch display for controllers with web interface ED-T7 :External touch screen display E3-DSP :External display EDSP-K3 :3 m cable for connecting an external display EDSP-K10 :10 m cable for connecting an external display EDSP-SPLIT :Cable splitter for connecting two display units to one controller E-CABLE2-USB :Cable for USB connection FMK2 :Front mounting kit, 12 modules FMCE :Front mounting kit, room for one controller TP-AE:Terminal protection kit for Ardo and Eedo controllers PLTCE :Set of angled plug-in terminal blocks BATTERY-4289: Replacement battery (CR2032)   

REGIN XCE163W-1 EXOcompact Eedo freely programmable controllers

REGIN XCE163W 1 freely programmable controller for building automation

Room controller, temperature Temperature controller for control of e.g. an EC fan or a damper in air handling or demandcontrolled ventilation applications. Technical data Supply voltage ： 85…230 V AC, 50/60 Hz Working range, temperature ：5…30 °C Outputs ：1 analogue output 0...10 V (RL &gt; 10 K) Mounting ：Room Protection class ：IP30 

REGIN AL230A Room temperature controller

EXOcompactArdo freely programmable controllers Small and compact controller with different types of communication, with or without built-in display. EXOcompact is equipped with various communication ports. Therefore it can either act as a stand-alone unit or be integrated with Arrigo BMS or other SCADA systems. User-friendly tools are available for flexible handling and easy access via the web server. Technical data Supply voltage ：24 V ~ (21…27 V ~ 50…60 Hz) / 20…36 V DC (not XCA20...) Power consumption：4 VA Protection class ：IP20 Ambient humidity ：Max. 95 % RH Ambient temperature ：0…50 °C Storage temperature ：-20…+70 °C Operating system ：EXOrealC Battery backup ：Memory and real-time clock, at least 5 years Mounting ：DIN-rail Number of modules ：8.5 Dimensions, external (WxHxD) ：149 x 121 x 58 / 149 x 136 x 58 (XCA20…) mm Communication ports Ethernet ：EXOline-TCP/IP, Modbus-TCP, BACnet/IP RS485 ：EXOline, EFX, Modbus-RTU, M-Bus (through X1176) M-Bus ：M-Bus Mini-Master I/O data Analogue input a (AIa) ：PT1000, 0…10 V, 0(4)...20 mA (requires external 10 or 500 Ω shunt), 0...200mV, DIN Ni1000, LGNi1000, 12 bits A/D Digital input a (DIa) ：24 V DC, floating contact, powered from +C (24 V DC) Digital input b (DIb) ：Sourcing input type, GND is ref (only available for XCA20…) Universal input a (UIa) ：AIa or DIa (see specifications above) Condensation input a (CIa) ：Input dedicated for Regin’s condensation detector KG-A/1 Analogue output a (AOa) ：0…10 V DC, max. 5 mA, short-circuit protected Digital output b (DOb) ：Mosfet output 24 V AC, max. 2 A, total max. 8 A +C output ：24 V DC, 0.15 A, short circuit-protected (not available for XCA20…) Material Material, housing ：Polycarbonate, PC   

REGIN EXOcompact Ardo freely programmable controllers XCA152DW-4  XCA152W-4 XCA153W-4 XCA203W-4 XCA282W-4

REGIN EXOcompact Ardo freely programmable controllers

ExigoArdo are controllers for heating and boiler control that make every step from installation to operation and maintenance easier than ever. Simply connect the controller, enter any settings as desired and start up. It can be used either stand-alone or integrated into a network. It has builtin support for many different languages and is designed for mounting on a DIN-rail or in a cabinet door. Technical data Supply voltage : 24 V AC (21…27 V AC 50...60 Hz) / 20...36 V DC Protection class : IP20 Storage temperature : -20…+70 °C Mounting : DIN-rail Number of modules : 8,5 Display type : Backlit (LCD), 4 rows of 20 characters Configuration : PT1000/Ni1000/Ni1000LG/0-10 V Operating system : EXOrealC Clock : Real-time clock Memory backup : Backup of memory and real-time clock function Battery backup : CR2032 replacable Lithium cell Battery life : Min. 5 years Dimensions, external (WxHxD): 149 x 121 x 60 mm Serial port data Port type : RS485 Default protocol : EXOline Supported protocols : Modbus / EXOline / BACnet MS/TP Port isolation :Galvanic common mode voltage. Max. 150 V Communication speed : 9600 baud (1200...76800 baud) Parity : Odd/Even/None Stop bits : 1 or 2 TCP/IP port data Port type : Ethernet Default protocol : EXOline-TCP/IP Supported protocols : EXOline-TCP/IP / Modbus-TCP / BACnet/IP Material Material, housing, base : Polycarbonate (PC) 

REGIN ExigoArdo – Configurable 24 V heating controller HCA152W-4 HCA152DW-4 HCA282DW-4 HCA283DWM-4 HCA283WM-4

REGIN ExigoArdo Configurable heating controller for efficient operation

CorrigoArdo – configurable 24 V ventilation controller CorrigoArdo are controllers for ventilation control that make every step from installation to operation and maintenance easier than ever. Simply connect the controller, enter any settings as desired and start up. It can be used either stand-alone or integrated into a network. It has built-in support for many different languages and is designed for mounting on a DIN-rail or in a cabinet door.It can be connected to CLOUDigo for the possibility to monitor the system from any location. Technical data Supply voltage : 24 V AC (21…27 V AC 50...60 Hz) / 20...36 V DC Protection class : IP20 Storage temperature : -20…+70 °C Mounting : DIN-rail Number of modules : 8,5 Display type : Backlit (LCD), 4 rows of 20 characters Confi guration : PT1000/Ni1000/Ni1000LG/0-10 V Operating system : EXOrealC Clock : Real-time clock Memory backup :Backup of memory and real-time clock function Battery backup : CR2032 replacable Lithium cell Battery life : Min. 5 years Dimensions, external (WxHxD) : 149 x 121 x 60 mm Serial port data Port type : RS485 Default protocol : EXOline Supported protocols : Modbus / EXOline / BACnet MS/TP Port isolation : Galvanic common mode voltage. Max. 150 V Communication speed: 9600 baud (1200...76800 baud) Parity : Odd/Even/None Stop bits ; 1 or 2 TCP/IP port data Port type : Ethernet Default protocol : EXOline-TCP/IP Supported protocols : EXOline-TCP/IP / Modbus-TCP / BACnet/IP Material Material, housing, base : Polycarbonate (PC) 

REGIN CorrigoArdo – configurable ventilation controller VCA152W-4 VCA152DW-4 VCA282W-4 VCA282DW-4

REGIN CorrigoArdo configurable ventilation controller

MGM Industries & Company

Features:  * Wide choice-over 20 models available * Automatic temperature compensation * Automatic power management * With IP65 verification of waterproof and dustproof (only PDR-F series)   

Portable Digital Refractometers

Portable Digital Refractometers with automatic temperature compensation

Satisloh Asia Ltd.

The VFT-macromeets all requirements for high performance free-form and Rx generating designed for all lab sizes featuring the industry proven VFT fast tool technology which enables outstanding surface quality, form accuracy at high throughput and availability. The compact generatorsets a new standard in economics for manual lens production and combines high throughput with small footprint and low weight. This high-end generator commands full surface milling and high speed turning as well as engraving of back side lenses. The automated tool and axes calibration enables accurate and repeatable results.Beyond its outstanding processing features the VFT-macro also has a highly functional design. Benefits and featuresHigh performance free-form and Rx generatingAutomated axes and tool alignment for accurate resultsHigh throughput with full surface milling and bevelingUniform production quality and yield with inherently stable working chamber designEasy operationTechnical informationWorking ranges        Concave up to -14.5 dpt.Lens materials         CR39, polycarbonate, Trivex, High IndexCompressed air        6.5 barEnergy requirements    208-400 V, 50/60 Hz, 3 phase, 6 kVA, 16 ADimensions (w x d x h)   1100 x 1200 x 1500 mm / 43 x 47 x 59 inchesWeight              800 kg / 1764 lb

VFT-macro

VFT macro high performance free form and Rx generating machine

Room controller, temperature and CO2 Temperature and CO2 controller for control of e.g. an EC fan or a damper in air handling or demand-controlled ventilation applications. Technical data Supply voltage :85…230 V AC, 50/60 Hz Temperature range :5…30 °C Working range, CO2 :0…2000 ppm Outputs :1 analogue output 0...10 V (RL &gt; 10 K) Mounting :Room Protection class :IP30  

REGIN ALC230A Room controller, temperature and CO2

A series of compact, economic and versatile stand-alone controllers without communication.They are pre-configured and intended for smaller applications. The controllers are easy to install, commission and control. Technical data Supply voltage : 24 V AC ±15 % / ...10-230 model: 230 V AC Power consumption : 4 VA Ambient temperature : 0…50 °C Storage temperature : -40…+50 °C Ambient humidity : Max. 90 % RH Mounting : DIN-rail Number of modules : 7 Protection class : IP20 Display : Backlit LCD, numeric/graphic, language-independent symbols Dimensions (WxHxD) : 123 x 123 x 60 mm Clock : Week-based 24-hour clock (models with 10 I/Os only) Inputs Analogue inputs (AI)：PT1000 Digital inputs (DI) ： Closing potential-free contact Universal inputs (UI) ： 0...10 V DC or digital Setpoint input (SPI) ： For an external PT1000 setpoint device, e.g. TG-R4/PT1000 or TBI-PT1000 Outputs Analogue outputs (AO) ： 0...10 V DC, short-circuit protected Digital outputs (DO) ： OP10 and OP10-230 only. Triac 24 V AC, 0.5 A (3-point control or alarm output) and one change-over relay 230 V AC, 5 A (fan start) 

REGIN Optigo – Controllers for simple applications OP5U OP10 OP10-230

REGIN Optigo Controllers for simple applications OP5U OP10 OP10 230

Humidity and temperature transmitter for Modbus communication, room mounting Technical data Supply voltage :24 V AC ±10 % / 15…35 V DC Output :Modbus Power consumption :&lt; 1 W Transformer power :≥ 2 VA Working range, temperature :0…50 °C Accuracy, temperature :±0.2°C at 20°C Working range, humidity :0…100 % RH Accuracy, humidity :±2 % RH at 20°C Communication :Modbus RTU Mounting :Room Dimensions :100 x 85 x 30.5 mm Protection class :IP30 Description ：RH + °C  

REGIN HTRC10 HTRC10-D Humidity and temperature transmitter for Modbus communication, room mounting

REGIN HTRC10 humidity and temperature transmitter for Modbus

Compressed air is one of the crucial power sources in the manufacturing industry, and the improvement of compressed air energy efficiency has received widespread attention over the past 20 years. To achieve the goals of energy conservation and emission reduction, users require reliable and efficient monitoring solutions to integrate various metering instruments within the factory campus. This enables comprehensive access to data such as flow rate, temperature, pressure, and dew point throughout the entire compressed air process—from air generation and post-treatment to transmission and final consumption. Based on this data, the system can be continuously optimized to achieve sustainable improvements in energy efficiency.Addressing the common issues of traditional monitoring systems, such as complex wiring, low scalability, and high costs, as well as the problem that IoT data cannot truly achieve privatization, COMATE (HONG KONG) LIMITED has launched the brand-newLocal Deployed Wireless Compressed Air Efficiency Monitoring System. The system leverages self-developed devices by COMATE, including theDS610 Edge Computing Server andCompanel Data Logger, and adopts wireless communication technologies such as LoRa and Bluetooth for data collection and transmission. It eliminates the need for wiring, significantly reduces deployment costs, and features extremely strong device scalability. This provides users with a private-domain data wireless monitoring solution that enables on-site data collection and storage.

Local Deployed Wireless Compressed Air Efficiency Monitoring System

Valves intended for on/off control of hot or cold water in heating or cooling systems. The valves can only be used together with Regin’s RVAFC actuators. The valves are available as both 2- and 3-way models. Technical data Application : Heating systems, cooling systems, fan-coil units, ventilation systems Media: Hot water, cold water, glycol-mixed water (max. 50 % glycol) Media temperature : 2…94 °C Pressure rating : PN16 (240 psi) Connection : Internal thread BSP according to ISO 228/1 Material Body : Brass CW614N Ball :EPDM O-rings :EPDM   

REGIN ZFCM215X ZFCM220X ZFCM223X ZFCM232X ZFCM315X 2- and 3-way on/off valves, DN15-32, kvs 3.2-10

REGIN ZFCM215X on off valves for heating and cooling systems

Corollary Equipment: Kjeldahl Apparatus, Soxhlet Extractor, Crude Fiber Analyzer, AAS, ICP-MS, Electrophoresis System, Rheometer, Automatic Synthesizer, Fermentation Apparatus, Rotary Evaporator, Extraction andCondensation Device, SPE Apparatus.  Features: * Cooling system adopt TECUMSEH compressor in order to ensure cooling efficiency, and reduce noise. * PID temperature controlling technology is adopted. Cooling method is not the traditional start-stop type, EEV technology improve the stability. * Over-temperature protection and auto-alarm function is used in refrigeration control system to avoid damage temperature medium  caused by abnormal liquid temperature value. * Water level observation window and automatic water level detection device, automatic alarm when low liquid level. * Water current detection device is adopted. When external cycle closed or blocked, internal cycle will be switched automatically. * High performance circulating water pump guarantee the long time continuous running, and good sealing avoid leakage. The pressure of pump is      0~1.5 bar, adjustment is available by rotary knob. Pressure value is displayed. * Color LCD screen display more running data and dynamic identifier. Easy to monitor.   

Recirculating Chiller

Recirculating Chiller with advanced cooling and monitoring features

Regio Mini room controllers Stand-alone controllers for control of heating and cooling in a single zone or room The Regio Mini controllers can be configured for a specific application via the display or dipswitches (in most cases, though, the default settings can be applied). The controllers have a built-in temperature sensor. Alternatively, an external temperature sensor can be connected. RC is the basic model in the range. The other models have various functions, indicated by the letters in the product name: D = Display, F = Fan control (3-speed), H = Hidden setpoint, O = Occupancy button, T = 3-point output   

REGIN Regio Mini room controllers RC RC-O RC-H RC-DO RC-DFO RC-T RC-TO RC-DTO

Regio Mini room controllers for heating and cooling control

上海康拓光学设备有限公司

Installation Distance: 0.15-0.2M phoropter center line to mirror (equivalent to the standard 5 meters optometry distance) Number of Charts: 33 (Distance), 7 (Near)  Chart Type: Tumbling E, Alphabet, Numbers, Children charts, Cross Cylinder, Astigmatism Clock Dial, Cross Grid, Fixation Spot, Stereo, Red &amp; Green Panel, Worth 4-dot, Horizontal &amp; Vertical Coincidence, Schober etc. Charts Control: Control Panel of AP-800 auto phoropter Charts Size: 210(W)*80(H)MM  Output interfaces: USB, LAN, RS232, which can realize interconnection with other equipment, such as AP-800 auto phoropter, FA-100/FA-100K auto refractometer and computer. Wireless Connection WIFI and Bluetooth are available. Light source: LCD backlight, LED fill light Voltage: AC100-240V, 60Hz/50Hz Power: 75VA Dimension: 450(W)*555(H)*470(D)MM 

CM -00 Tabletop Refraction System

CM 00 Tabletop Refraction System for optometry

Guangdong Aoheng Environmental Protection Technology Co., Ltd.

MVR evaporator, short for mechanical vapor recompression. MVR is a technology that reuses the energy of its own secondary steam, thereby reducing the need for external energy. The secondary steam is compressed by the compressor, the pressure and temperature can be increased, and the enthalpy increases accordingly. It is sent to the heating chamber left for evaporation as the heating steam, namely the steam, so that the material liquid can maintain the evaporation state, and the heating steam itself will transfer the heat to the material and become condensed into water. In this way, the steam originally to be discarded is fully utilized, the latent heat is recovered, and the thermal efficiency is improved. The price is negotiable 

Evaporator - MVR

Evaporator MVR for energy-efficient mechanical vapor recompression

Room temperature controller for 0...10 V DC or 3-point actuators This room controller is primarily intended for control of heating or cooling in zone control systems. It has an input for a presence detector (occupancy control). The controller also has an input for change-over, which makes it possible for the control function to switch between heating and cooling. Technical data Supply voltage: 24 V AC, ±15 % 50...60 Hz, 2 VA Output : 0...10 V DC, 1 mA or 3-point, 24 V AC, 1 A Inputs : Two digital and one NTC sensor Setpoint : 0...40 °C P-band :0.5...50 K Protection class :IP20 

REGIN AL24A1T Room temperature controller for 0...10 V DC or 3-point actuators

REGIN AL24A1T Room temperature controller for heating and cooling

Features: * High precision and wide range of tamp control. * Blowing a large number of samples at one time. * Blowing each sample independently. * Amount of airflow can be adjusted. * Easy operation; safe and reliable to use. * 12-month warranty.   

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?