LISUN ELECTRONICS (SHANGHAI) CO., LTD

EMI receiver system is for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is made of full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for theEMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. Standard：CISPR15:2018/GB17743 “Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment”CISPR16-1 “Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-1: Radio disturbance and immunity measuring apparatus – Measuring apparatus”EN55015 “Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.”EN55022 “Radio disturbance characteristics – Limits and methods of measurement” System Configuration:• EMI-9KC Test System includes: EMI-9KC EMI Receiver built-in Attenuator (9K-1GHz), LISN Artificial Network Power, CDNE-M316 Coupling/Decoupling Network for Emission, Isolation Transformers and cables.• EMI-9KB Test System includes: EMI-9KB EMI Receiver (9K-300MHz), LISN Artificial Network Power, CDNE-M316 Coupling/Decoupling Network for Emission, Isolation Transformers, Attenuator and cables.• EMI-9KA Test System includes: EMI-9KA EMI Receiver (9K-30MHz), LISN Artificial Network Power, Isolation Transformers, Attenuator and cables. Optional instruments to work with the EMI-9KC, EMI-9KB and EMI-9KA EMI receivers:•LISUN LSP-500VARC/LSP-1KVARC Pure Sine Wave AC Power Source for EUT•LISUN SDR-2000B Magnetic Shielding Cabinet for the EMI Receiver System•LISUN VVLA-30M Three Loop Antenna to test 9k-30MHz radiation•LISUN AB-CLP Absorbing Clamp to test the home applications &amp; motor tools•LISUN VOL-CP RF Current Probe to the conducted disturbance voltage Specification:• Detection frequency range: 9kHz~1GHz (EMI-9KC), 9kHz~300MHz (EMI-9KB), 9kHz~30MHz (EMI-9KA)• Frequency stability: 1×10^-6• Frequency resolution: (9kHz~150kHz) 30Hz; (150kHz~30MHz) 1kHz• Test Tolerance: ±2 dB• Measure and Detection method: PK, QP and AV• Measure range: 20dBμV~140dBμV• Frequency scanning step frequency: 20Hz~2MHz• Sweep bandwidth: 200Hz; 9kHz; 120kHz• Connect PC via USB cable and software can run on Win7, Win8, Win10, Win11 

EMI Test Receiver

EMI Test Receiver for Electromagnetic Interference testing

SY2036 LED aging and life test rack is fully designed according to the IEC standards, and it can also be designed based on the customer request. SY2036 can test all kinds of lamps and luminaires, such as LED, CFL, HID indoor lamp and outdoor lamp. Feature:• PLC program and English/Chinese touch screen, easy for the operation and maintenance.• Built in over-current protection system. When the load’s current becomes too high, the device will give alarm and switch off the output to protect the transformer.• Contains 3 independent layers and each can work separately. It can test different kinds of EUT. Specification:• Input Power supply: AC220V (110V is optional), 50/60HZ, 12kVA• Built-in transformer: 0-250V 5kVA and 0-300V 5kVA (Other power is optional)• Maximum power for EUT: 5kVA and 12A (Other power is optional)• EUT and Number: 112pcs B22, 112pcs E27, 36pcs T5/T8/T12 Tube, 22pcs LED panel (Other EUT can be designed according to customer request)• ON/OFF test: Can be set on the touch screen with program• Test cycles: 0~99999（Adjustable） LISUN SY2036 LED Aging and Life Test Rack – After-sales Frequently Asked Questions (FAQ)LISUN SY2036 LED Aging and Life Test Rack were in the market for more than 10 years, LISUN engineers service team already summary the most of the After Sales Questions and Answers in the above link. Please read it carefuly, you can solve the most of the problems by yourself if you have some questions while using the instruments. LISUN will be continue to update this pages and more FAQ can be found in this topic link.  

LED Aging and Life Test Rack

LED Aging and Life Test Rack SY2036 for lamp testing

FUBI COMPANY

Stereo Test

The ZY-3 Needle Flamp Test apparatus is mainly used for testing lighting equipment, low-voltage electrical appliances, household appliances, power tools, electronic instruments, electronic meters, etc. Additionally, this instrument is also suitable for testing insulation materials, engineering plastics, and solid flammable materials. The needle flame test apparatus consists of a needle flame burner, a working chamber, and a temperature measuring device. The needle flame test apparatus utilizes a needle-shaped burner with a specified size (Φ0.9mm) and is fueled by a specific gas (butane or propane). The burner is oriented at a angle of 45° and ignited for a predetermined time onto the test specimen, evaluating the ignition hazard of small flames caused by internal fault conditions of the equipment based on whether the test specimen and the ignition pad ignite, the duration of combustion, and the length of the flame. Standard:IEC 60695-2-2:2021 “Fire hazard testing – Part 2: Test methods – Section 2: Needle-flame test”IEC 60695-11-5:2016 “Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance”IEC 62368-1:2023 “Audio/video, information and communication technology equipment – Part 1: Safety requirements” Specification:• Angle of burner: 45° (when in test) / 0° (when adjust the flame’s height)• Needle flame burning time: 0~999.9s±0.1s (adjustable, 30s in general)• After-flame time: 0~999.9s±0.1s, auto record and pause manually• Height of flame: 12mm±1mm• Gas: 95% butane (Note: Digital flow meter is optional with extra cost)•Test range of temperature: 0~1000℃• The temperature rises from 100℃±2℃ to 700℃±3℃ within 23.5 seconds±1s• Thermocouple: Φ0.5mm K type• Applied with touch screen and remote control• Number of burns for a single test: single or multiple burns can be set LISUN ZY-3 needle flame tester can run multiple times flame test in a single test automatically according to the Annex S S.1 of the IEC62368-1 standard: 

Needle Flame Test

Needle Flame Test apparatus for fire hazard evaluation.

The OTC-150A Ozone test chamber simulates the oxidative effect of ozone on materials in the natural environment. It generates ozone with a controllable concentration using a silent discharge tube, and combines with a precise temperature and humidity control system to replicate the aging process of materials in an ozone environment. Equipped with static/dynamic stretching functions, it can simulate the stress-bearing state of materials. Meanwhile, it monitors parameters such as ozone concentration, temperature and humidity in real time to ensure stable test conditions. Widely used in fields including rubber, textiles and cables, it is applied to verify properties like ozone cracking resistance of automotive rubber seals, ozone color fastness of outdoor textiles, and ozone aging resistance of cable sheaths. It provides scientific data for material R&amp;D and quality inspection, helps enterprises control the weather resistance of products, and effectively ensures the stable performance and safe service life of products during long-term use. Model List: LISUN ModelWorking Room Size (mm)Working Power SupplyOTC-150A500*500*600Single Phase 220-240V, 50/60Hz, 5kVAOTC-500A700*800*900Single Phase 220-240V, 50/60Hz, 6.5kVASpecification: Parameter CategorySpecific Parameter ItemsSpecification DetailsOzone Concentration ControlRegulation Range10~1,000pphmFluctuation Degree2~3pphmTemperature ControlRegulation Range0℃~60℃Fluctuation Degree±1℃Uniformity2℃Deviation±2℃Humidity ControlRegulation Range20%~90% RH（based on 20℃~40℃）Deviation±5%RHUniformity5%RHFluctuation Degree≤±3%RHSpecimen Testing ParametersSpecimen Holder Rotation Speed8~25mm/sFixture Elongation Rate5~45%Stretching Frequency0~30times /minuteMaximum Stretching Length0~90mm（adjustable）Stretching Test ModeA: Static Stretching Mode;B: Dynamic Stretching Mode;C: Intermittent Dynamic Stretching Test ModeGas CirculationGas Flow Velocity600±100mm/s（Forced Air Supply Circulation Mode）Control System and Data ManagementControllerSelf-Developed Ozone-Specific Control System (7-Inch Touchscreen)Data Export FormatEXCEL（Supports Multiple Data Processing Requirements）Data Export MethodsA: External USB Interface;B: RJ45 Network Port for Remote Computer Storage Environment and SafetyNoise≤75 decibel（Low-Noise Design）Equipment Operating Environment Temperature0~30℃Equipment Operating Relative Humidity≤85%RHEquipment Operating Atmospheric PressureNormal Pressure

Ozone Test Chamber | Ozone Aging Test Chamber

Ozone Test Chamber OTC 150A for material aging simulation

Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. Salt spray test chamber is to assess the corrsion resistance of materials and coatings. This type of test is important for various industries to ensure the durability and reliability of products, especially those exposed to harsh environmental conditions, such as marine environmentals, automotives settings, or industrial applications. Specification: LISUN ModelYWX/Q-150YWX/Q-250YWX/Q-750YWX/Q-010YWX/Q-016YWX/Q-020Working room size 600*450*400900*600*5001100*750*5001200*800*5001600*1000*6002000*1000*600External dimensions1100*670*10501410*900*10501600*1050*12001700*1150*12002300*1250*14502800*1350*1450Capacity108L270L412L480L960L1200LSolution tank volume 15L25L30L32L40L45LWorking powerSingle -phase AC 220V/50Hz (60Hz available)Three -phase AC 380V/50Hz (60Hz available)1.5KW2.0KW2.5KW2.5KW5.0KW6.0KWSample space available 500*300*250800*450*250900*600*3001000*600*3001400*800*3501800*800*350Opening MethodManual controlManual controlManual controlStainless steel air spring supportCylinder supportCylinder supportWorking temperatureRoom temperature ~+55 ℃The temperature range of saturated barrelRoom temperature ~+70 ° C (Heating and filtering compressed air to reduce nozzle crystallization)Temperature performanceTemperature uniformity: ≤2 ℃   Temperature volatility: ≤ ± 0.5 ℃Salt spray deposition rate1-2ml/80cmm/h (take average of 16-hour test )Spray methodContinuous, intermittent, programmable testTest typeNeutral test (NSS), acid test (AASS), copper acceleration salt fog test (CASS)Safety protection mechanismLow water level alarm, over-temperature alarm (mechanical over-temperature protection + electronic over-temperature protection dual over-temperature protection), low air pressure alarmRequirements for air compressorsPrepared by the customer: air inlet pressure 0.4Mp or above, two-stage pressure regulation, spray pressure 0.07~0.17Mp (adjustable)Sample rackOne set of V -shaped grooves and O -type round sticks (combined with an angle of 20 ° ± 5 °). Special sample racks can be ustomized, and the load-bearing capacity is configured according to actual conditions.Standard accessories1 set of V -type/O -type sample racks, 2 bottles of sodium chloride (500g/bottle), 1 plastic rust -proof barrel (5L), 1 nozzleWorking environment requirementsThe ambient temperature is 5℃~30℃. Ventilation is recommended. When the temperature exceeds 30℃, it is recommended to adjust the room temperature through appropriate methods. The ambient humidity is below 80%Rh.

Salt Spray Test | Salt Spray Test Chamber

Salt Spray Test Chamber for corrosion resistance testing

Changchun Wancheng Bio-Electron Co., Ltd.

HCG Test Kit

Impulse Test Generator SUG-CCITT-A (Circuit 1, 10/700μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D, Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N). Standard:IEC 62368-1:2018“Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60065:2014 “Audio, video and similar electronic apparatus – Safety requirements”IEC 60950-1:2005 “Information technology equipment – Safety – Part 1: General requirements” Circuit reference 1 of Table D.1 generates 10/700 μs impulses (10 μs virtual front time, 700 μs virtual time to half value) as specified in ITU-T Recommendation K.44 to simulate lightning interference in the TELECOMMUNICATION NETWORK. Note:1. If you also need Circuit 2, 1.2/50μS, according to Figure D.1/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure K.1/ Tabke K.1 in IEC 60065:2014 Annex K , and Figure N.1/ Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255XXimuplse voltage generator2. If you also need Circuit 3, according to Figure D.2/ Table D.1 in IEC 62368-1:2018 Annex D (Or Figure N.2/Table N.1 in IEC 60950-1:2005 Annex N), it will beSUG255CXimuplse voltage generator  

Impulse Test Generator

Impulse Test Generator for telecommunication network testing

CF Instrument Accessories (Hong Kong) Ltd.

CF-737220 M4 Test Probe •Ø2mm test probe of brass pin on one end with M4 thread behind tip  on one end on one end •Probe tip length exposed as well as category can be adjusted by ratating the front body •Ø4mm rigid socket connection accepting Ø4mm shrouded or unshrouded plugs •Compliant with IEC61010-031: 2015 •Rated voltage: CAT II 1000V / CAT III 1000V &amp; CAT IV 600V •Rated current: 10A 

M4 Test Probe

M4 Test Probe with adjustable probe tip length

LEDLM-84PL LED Lumen Maintenance and Aging Life Test System is designed according toIES LM-84 and TM-28. It is used to test &amp; record the optical and electrical maintenance for LED luminaires. The software is based on Arrhenius model and TM-28 to calculate the LED life. The LEDLM-84PL needs to work withGDJW Series High and Low Temperature Chamber (Option is GW Series) andLSP-1KVARC AC Power Source. Please click to view the test report samples ofLM-84 and TM-28. LEDLM-80PL LED Lumen Maintenance and Aging Life Test System is designed according toIES-LM-80 andTM-21. It is used to test &amp; record the optical and electrical maintenance for single LEDs or LED module. The software is based on Arrhenius model and TM-21 to calculate the LED life. The LEDLM-80PL needs to work withGDJW Series High and Low Temperature Chamber (Option is GW Series) and and DC6010 Series DC Power Source. Please click to view the test report samples ofLM-80 and TM-21. LED has the feature of long life, but its life will be different with the different working condition and driver current. Generally the life will be around 50K hours. Different from the traditional lightsource, LED light will decay gradually rather than extinguish instantly.1) L70 (hour): time to 70% lumen maintenance2) L50 (hour): time to 50% lumen maintenance Standard:IES LM-84 “Measuring Optical Radiation Maintenance of LED Lamps, Light Engines, and Luminaires”IES-LM-80 ” LED Lumen Maintenance and Aging Life Test “LM-79-19 “Optical and Electrical Measurements of Solid State Lighting Products” Specification:• Record the changing curves of lumen, colorimetric and electrical parameters VS time• Test and record the light attenuation data within a short time, then software will predict the LED life• Introduction to Arrhenius Model, make the final result more reliable and efficient• The LEDLM-84PL test system works with LISUNGDJW-015AGDJW Series High and Low Temperature Chamber can test 8 LED luminaires at one time; the LEDLM-80PL test system works with LISUNGDJW-500AHigh and Low Temperature Chamber can test 16 single LEDs or LED module at one time . (Option 1: Up to 3 sets Temperature Test Chambers can be connected to work with LEDLM-84PL/LEDLM-80PL at the same time for testing. Option 2: Other sizeHigh and Low Temperature Chamber) 

LED Optical Aging Test Instrument

LED Optical Aging Test Instrument for lumen maintenance testing

UV aging test Chamber (also known as UV accelerated aging test chamber UV weathering aging test chamber, UV aging test machine) is a professional equipment for material weathering test. It uses UV lamps to simulate the ultraviolet radiation of natural sunlight, restores the dew and rain environment through condensation and water spray systems, and integrates high temperature, high humidity and other conditions to form a cyclic test program. It can reproduce the aging damage of materials that takes months to years to appear outdoors in a few days or weeks. The testing principle is based on simulating environmental accelerated aging: using UV lamps to simulate sunlight, condensing moisture to simulate rain and dew, placing the material in a cycle of alternating light and moisture, accelerating aging at a specific temperature, and quickly obtaining weather resistance data. The equipment is widely used in coatings, resins, plastics, rubber and other industries, covering automotive, electronics, pharmaceutical and other fields. It can simulate the damage of sunlight, rain and dew to materials, such as fading, powdering and cracking, helping enterprises screen new materials, optimize formulas and evaluate material performance, providing key support for product quality improvement and R&amp;D process acceleration. Reference standards: Standard NOStandard NameAATCC TM186Standard Practice for Accelerated Aging of Nonmetallic Materials: Fluorescent UV/CondensationASTM D3794Standard Test Methods for Resistance of Organic Coatings to the Effects of Accelerated WeatheringASTM D4329Standard Practice for Exposure of Plastics to Fluorescent Ultraviolet LampsASTM G151Standard Practice for Operating Light – and Water – Exposure Apparatus (Fluorescent UV – Condensation Type) for Exposure of Nonmetallic MaterialsASTM G154Standard Specification for Fluorescent Ultraviolet – Lamp Apparatus for Exposure of Nonmetallic MaterialsASTM G53Standard Practice for Operating Light – and Water – Exposure Apparatus (Fluorescent UV – Condensation Type) for Exposure of Nonmetallic MaterialsASTM D4329Standard Practice for Exposure of Plastics to Fluorescent Ultraviolet LampsDIN 53384Testing of plastics; artificial weathering, artificial light exposure and xenon arc exposure of plasticsISO 11507Plastics – Determination of resistance to photo – oxidation in the laboratory by measurement of changes in properties after exposure to fluorescent ultraviolet (UV – A) radiationISO 4892-3:2013Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent ultraviolet lampsJIS D0205Test methods for weather resistance of automotive partsSAE J2020Fluorescent Ultraviolet (UV) Condensation Exposure of Automotive Interior Nonmetallic MaterialsNote: Different standards have slightly different requirements for UV aging tests. We recommend that you confirm with LISUN engineers which standards each LISUN UV aging chamber model meets in order to accurately match your testing needs. 

UV Aging Test Chamber

UV Aging Test Chamber for accelerated material weathering tests

The LS9955/LS9956Automatic Safety Test System (electrical safety analyzer) combines the following functions: Withstand Voltage Test (AC / DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test (LS9956 includes Power Test, LS9955 does not include Power Test). The equipment is mainly used for lighting fixtures, household appliances and motor tools safety test on the production line or in the R&amp;D laboratory. Standard:IEC/EN 60335-1:2023/GB 4706.1-2024 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 60335:2022 “Standard for Safety of Household and Similar Appliances, Part 1: General Requirements”IEC 60598:2024/GB 7000-2023 “Luminaires – Part 1: General requirements and tests”IEC 60950:2020 “Information technology equipment Safety –Part 1: General requirements “IEC 62368-1:2023/GB 4943-2022 “Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60601-1 3.1:2012/ GB 9706.1-2020 “Medical Electrical Equipment – Part 1: General Requirements For Basic Safety And Essential Performance” Specification:• Remote control device and can control by software (Optional)• Display all setting parameters and testing results in the same big LCD screen• PASS/FAIL limit values can be set.If the object fails the test, there will be a light/sound alarm• Test mode is programmable; 50 groups settings are available, 8 test steps per group• Quick discharge. Support 50Hz and 60Hz frequency; Electric safety wall detecting feature• The LS9955 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC) and Ground Resistance (GR)• The LS9956 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC), Ground Resistance (GR) and Power Withstand Voltage Test (AC/DC)Insulation Resistance Test (IR)Voltage RangeAccuracyCurrent RangeIR RangeAccuracyVoltage Range100~4000V± (5%+3V)AC: 0.10~20.00mADC: 0.10~12.00mA1.00~2000MΩ5% + 0.5MΩDC100~1000VLeakage Current Test (LLC)Grounding Resistance Test (GR)LLC RangeAccuracyVoltage RangeGR RangeAccuracyOutput Current0.10~20mA± (0.3%+5uA)AC10.0~300.0V0~600mΩ± (5%+2mΩ)AC1.00~30.00APower TestVoltageCurrentPowerPFAccuracyTest Time10~300V0.010~20.00A1.0~6000.0W0.2~1.0Class 0.50~999.9sP.S. The LS9955/LS9956 of Leakage Current Test (LLC) needs to work with LISUNITEU-SP1KS or ITUS-SP1KS Isolation Transformer (The Output is 1.06times of the input). The LS9955/LS9956 of Leakage Current Test (LLC) and Power Test need to work with LISUNLSP-1KVARC orLSP-1KVAS AC Power Supply. 

Automatic Safety Test System

Automatic Safety Test System for electrical safety analysis

Ningbo Rontek Electronic Co.,LTD

Very low stand-by power loss Plug-in Lithium Iron Phosphate battery Complete set with integrated electronics, LED module, housing, and battery Piloteer series -recessed spot emergency lights 5 years guarantee for electronic part SELV for output voltage 

Spot Light Manual test and self-test function

Spot Light Manual test and self test function

The XD-150LS Xenon Arc | Xenon Weathering Resistance| Xenon Lamp Aging Test Chamber is an important means for screening formulations and optimizing product compositions during the scientific research and production process. It is also an important part of product quality inspection. Applied materials such as coatings, plastics, geotextiles, textiles, fuels, aluminum-plastic panels, as well as automotive safety glass, automotive interior parts, exterior parts, and other products are required by relevant standards to undergo weather resistance tests. The main factors causing material aging are sunlight, temperature, and humidity. The Xenon Lamp Aging Test Chamber can simulate sunlight, rainwater, and dew. The materials to be tested are placed in a cyclic program of alternating illumination and moisture at a certain temperature for testing. It can reproduce the damages that occur outdoors in several months or even several years within just a few days or weeks. The Xenon Lamp Aging Test Chamber uses a xenon arc lamp that simulates the solar spectrum to reproduce the destructive light waves existing in different environments. It can provide corresponding environmental simulation and accelerated test basis for scientific research, product development, and quality control. It can be used for the selection of new materials, the improvement of existing materials, or the evaluation of changes in durability after the composition of materials is altered. It can effectively simulate the changes that materials undergo when exposed to sunlight under different environmental conditions. Note: Different standards have slightly different requirements for xenon lamp aging tests. We recommend that you confirm with LISUN engineers which standards each LISUN xenon lamp aging chamber model meets, so that they can accurately match your testing needs. Specifications: LISUN ModelXD-150LSXD-010LSXD-010LFTest ChamberInternal Dimensions(D*W*H)500*600*500mm1000*1000*1000mmExternal Dimensions(D*W*H)1030*1130*1900mm1730*1430*2100mmSample Test Rack Inside the ChamberFlat Panel-Type: Flat Panel size is 460*550mmFlat Panel-Type: Flat Panel size is 960*960mmDrum-Type: Can test 66 standard samples, each with a size of 190*70mmThe distance between the Center and the Sample Test Rack200~400mm (Adjustable)260~300mm (Fixed)TemperatureTemperature range in the chamberRT~80℃Black Panel Temperature45~85℃Temperature Fluctuation≤±0.5℃Temperature Deviation±2℃（With the light off）Temperature Uniformity≤2℃Heating Power2KW4.5KWHumidityHumidity Range20~95%R.H  Humidity Fluctuation+2%, -3%R.HHumidity Deviation≤±3%R.HHumidifying Power2KW3KW

Xenon Lamp Aging Test Chamber

Xenon Lamp Aging Test Chamber for material weathering tests

MGM Industries & Company

The iHealth® COVID-19 Antigen Rapid Test is a lateral flow assay intended for the qualitative detection of nucleocapsid protein antigen from SARS-CoV-2.  This test is authorized for non-prescription home use with self-collected anterior nasal (nares) swab samples from individuals aged 15 years or older with symptoms of COVID-19 within the first 7 days of symptom onset. This test is also authorized for non-prescription home use with adult-collected nasal swab samples from individuals aged 2 years or older with symptoms of COVID-19 within the first 7 days of symptom onset.  This test is also authorized for non-prescription home use with self-collected anterior nasal (nares) swab samples from individuals aged 15 years or older, or adult collected anterior nasal swab samples from individuals aged 2 years or older, with or without symptoms or other epidemiological reasons to suspect COVID-19 when tested twice over three days with at least 24 hours (and no more than 48 hours) between tests.  This product has not been FDA cleared or approved; but has been authorized by FDA under an EUA; This product has been authorized only for the detection of proteins from SARS- CoV-2, not for any other viruses or pathogens; and, The emergency use of this product is only authorized for the duration of the declaration that circumstances exist justifying the authorization of emergency use of in vitro diagnostics for detection and/or diagnosis of COVID-19 under Section 564(b)(1) of the Federal Food, Drug and Cosmetic Act, 21 U.S.C. § 360bbb-3(b)(1), unless the declaration is terminated or authorization is revoked sooner.  Disclaimer: If you’re currently experiencing COVID-19 symptoms, please contact your primary care physician (PCP) for immediate guidance. iHealth® COVID-19 Antigen Rapid Test may take several days to ship. This is not a PCR test and not valid for travel. The manufacturer of the iHealth® COVID-19 Antigen Rapid Test requires test kits be stored at temperatures between 36o and 86oF (2o - 30oC). Any extended exposure of the test kit to temperatures beyond this range may affect quality of test results. If you have ordered home delivery of the test kit and expect temperatures in your area to be outside of this range at time of delivery, it is recommended that you arrange for someone to be home at or near time of delivery to receive the test kit. 

 COVID-19 Antigen Rapid Test Self-Test at Home

COVID 19 Antigen Rapid Test for self-testing at home

The JL-X includes the following water proof IP codes: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 ofIEC 60529). It is widely used in the authentication test organization for the products such as electrical &amp; electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades. Standard:IEC 60529:1989 +A1:1999 +A2：2013 “Degrees of protection provided by enclosures(IP Code)”IEC 60598 “Luminaires – Part 1: General requirements and tests”IEC 60335 “Household and similar electrical appliances – Safety – Part 1: General requirements”IEC 60034-5 “Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification”GB 7000.1 “Luminaires-Part 1：General requirements and tests” The whole JL-X waterproof test system includes:• Drip Box (JL-12): The drip box meets the test requirements of IPX1 and IPX2 in Clause 14.2.1-14.2.2 and Figure 3 of IEC 60529:1989 +A1:1999 +A2：2013. The drip box size is 800x800x45mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. It can test samples over 150kg. •Swing Pipe Water Spray Test Equipment (JL-34):It meets the test requirements of IPX3 and IPX4 in Clause 14.2.3-14.2.4 and Figure 4 ofIEC 60529:1989 +A1:1999 +A2：2013. The radius of oscillating tube is 1meter (Any other size is also available). The internal diameter of the tube is 15mm. The sample turntable diameter is 1000mm (Other sizes are optional according to the diameter of the oscillating tube), and the height is adjustable. It includes a water tank. The rotation speed is 1~5rpm which can be set and controlled by PLC panel. • Spraying Nozzle and Splashing Water Hand held Test Device (JL-34S):It meets the test requirements of IPX3 and IPX4 in Clause 14.2.3-14.2.4 and Figure 5 ofIEC 60529:1989 +A1:1999 +A2：2013• Water pressure regulation requirement: The water pressure is adjusted to achieve the specified flow rate, and the required pressure range is 50 kPa to 150 kPa.• Test duration requirement: The test duration is 1 minute per square meter of the calculated surface area of the shell (excluding any mounting surface), and the minimum test time is 5 minutes.• The JL-34S includes the following: a pressure gauge, an 8m long water pipe and a Sprinkler with a 5mm Spray Nozzel. • Waterproof Jet Test Device (JL-56): It meets the test requirements of IPX5 and IPX6 in Clause 14.2.5-14.2.6 and Figure 6 of IEC 60529:1989 +A1:1999 +A2：2013. With a 780*580*1100mm size water tank, the nozzle diameter is ф6.3mm (IPX5 waterproof test ) and ф12.5mm (IPX6 waterproof test). The water flow is 12.5 ±0.625L/min for IPX5 and 100 ±5L/min for IPX6  

IP Waterproof Test Equipments

IP Waterproof Test Equipments for comprehensive waterproof testing.

Shenzhen Jiduoduo Dianzi Shangwu Co.,Ltd

Description: Quantity:1setColor: Black / RedMaterial: PVC Specification:1. With rubber shrouded, it is comfortable to grip2. Universal multi-meter plug, convenient to use3. It is one of the useful tools that will brings a lot of convenience for your electronic workPackaging List: 1 X PT1005 Test Lead 

ANENG PT1005B Test Lead

Vicimeter Technology (Hong Kong) Co., Ltd.

AC Ⅱ Non-contact Voltage Tester  Features: Inductive testingWire-circuit testingAC 90V~1000V SensitivityIntelligent single chip controlNon-contact voltage detectionHigh-quality engineering plasticsPortable easy-to-use voltage testerLED-flashlight &amp; Audible-dick function Specifications:Model AC II Sensitivity range AC 90V~1000V Voice alarm  √ Lighting function √ NCV function √ Battery 2pcs 1.5V AAA Battery continuous use 6 hours Battery standby for 1.5 years Safe category CAT IV 1000V General Info: Tester Color Orange + White + Black Tester weight 45g Tester size 150(L) x 20(W) x15 (D) mm Standard Packing Including Tester, blister-card, battery (outside the tester) Individual Packing Style Blister-card Master carton packing 200pcs Master carton size 65*25*45CM Master carton weight 14.5KG  ! Warning Do not place this voltage detector near voltageover 1000V AC. 

Vici AC II Voltage Detetcor 90V-1000V AC Volt Test Pen

Vici AC II Voltage Detector for non-contact voltage testing

Urine pH Test Strips

Yiwu GreaTeam Toy Co., Ltd

45G SLIME + 1PC TOY / PCS ,24PCS/DSP BOX 12BOX/CTN

TEST TUBE SLIME W/CREATURE

Vici VC1508B+ Inductance test 500MΩ 20GΩ Insulation test Multimeter  Features: 1. Insulation Resistance measurement, accept remote-control test; 2. Inductance, True RMS, non-contact voltage detection, frequency/duty-cycle tests; 3. Large LCD display makes reading clear; 4. Strong antimagnetic and anti-interferential performance, full function protection; 5. Auto power off when there is no measurement in 15 minutes; 6. Unit symbol display, easy to read; backlight display; 7. MAX/MIN value hold, Data hold, backlight functions;   . Technical specifications: Basic function Range Accuracy DCV 600mV/6V/60V/600V/1000V ±(0.5%+5) ACV 6V/60V/600V/750V ±(0.8%+10) DCA 6mA/60mA/600mA/6A/20A ±(1.0%+5) ACA 6mA/60mA/600mA/6A/20A ±(1.5%+10) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+2) Capacitance 60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Inductance 6mH/60mH/600mH/6H/60H/100H ±(1.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/60kHz ±(1.0%+3) Insulation 500MΩ for 500V, 20GΩ for 1000V ±(4.0%+2) Temperature -40℃~1000℃ | -40℉~1832℉ ±(1.0%+5)  Special function:  Max. display 6000 Safety level CAT. III 600V True RMS, NCV √ Insulation remote control test √ Function Protect √ Diode test √ Continuity test Warning sound when less than 50Ω Duty cycle measuring √ Data hold √ Backlight display √ Max-Min MAX., MIN. value and difference value between MAX and MIN Auto power off Approx.15minutes Low battery indication Approx. less than 7.6V Input impendence 10MΩ Sampling rate 3times/s AC frequency response 40Hz-2kHz Operation way Manual or auto range LCD size 65×40mm Power 6x1.5V AA battery Power dissipation Quiescent current approx. 6mA  General Info: Color Orange holster and Grey device Weight 480g (including battery) Meter size 200mm×92mm×50mm Standard accessory TL-98A test leads, TL-1358 black crocodile clip test lead, TL-1508 black test lead, TP01 temperature probes, 6pcs 1.5V AA battery, English manual, Black handbag. Packing Gift box Quantity per carton 20pcs Carton size 46.5*31.5*29.0cm GW per carton 17.0kg  

Vici VC1508B+ Inductance test 500MΩ 20GΩ Insulation test Multimeter

Vici VC1508B Inductance test 500M Insulation test Multimeter

VivaChek Biotech (Hangzhou) Co., Ltd.

FOB (Fecal Occult Blood) serves as an early warning sign for colorectal cancer and other gastrointestinal diseases. A sample of approximately 50mg, collected from at least 5 different parts of the stool, is required for testing. Each year, over one million patients worldwide suffer from gastrointestinal bleeding and need early screening.  The VivaDiag FOB Rapid Test Strip adopts the colloidal gold method, delivering results in 10 minutes. For professional use by healthcare workers only, it facilitates early screening and diagnosis of gastrointestinal diseases. 

VivaDiag FOB Rapid Test

VivaDiag FOB Rapid Test for early screening of gastrointestinal diseases

The ZRS-3H Glow-wire Test Apparatus is used to test the flammability of plastic sheets or other insulating materials. The specimen is exposed to a high temperature glow wire (nickel/chrome wire) through a standard test procedure. It is used to identify whether the insulating material does not reach a certain temperature or ignite to prevent fire hazards around it. What is glow wire test?The Glow wire tester ZRS-3H/ZRS-3HS is mainly used to test the ignition performance, ignition temperature, flammability and flammability index of lighting equipment, electronic products and household appliances. The equipment adopts high-temperature sprayed steel structure and imported instrument display, which is easy to operate and has stable test performance. This equipment is mainly used for flame retardancy testing by QC departments and related enterprises. Standard:IEC 60695-2-1:2021(VDE0471:2019) “Fire hazard testing – Part 2: Test methods – Section 1/sheet 1: Glow-wire end-product test and guidance”IEC 60695-2-11:2021(GB/T5169.10-2006)”Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end products (GWEPT)”IEC60695-2-10:2000 “Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure”IEC 60695-2-12:2021 “Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials”IEC 60695-2-13:2000 “Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignition temperature (GWIT) test method for materials”IEC 60335:2023 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 746A:2021 “Standard for Polymeric Materials – Short Term Property Evaluations”IEC 829 Specification:• Heating temperature: adjustable continuously within the range of 25~1100°C, the accuracy of temperature is 3°C, the resolution of temperature is ±1°C• Glow-wire time: 0.1-999.9s，±0.1s(time range is adjustable)• Ignition time: 0.1-999.9s (auto record, manual pause)• Flame-out time: 0.1-999.9s (auto record, manual pause)• Glow wire pressure on test specimen: 0.95±0.1N. Limiting pressure depth is 7mm.• Glow wire: φ4 nickel (80％) and chromium (20％). Made in specific dimensions.• Thermocouple: φ1 armored nickel-chromium/nickel-aluminum wire, K Type.• Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. 

Glow-wire Test Apparatus

Glow wire Test Apparatus for flammability and ignition testing

Vici VC4060B+ Inductance test 500MΩ 20GΩ Insulation test Multimeter  Features: 1.  New type holster, streamlined design, comfortable handle; 2.  Large LCD display makes reading clear; 3.  Strong antimagnetic and anti-interferential performance, full function protection; 4.  Auto power off when there is no measurement in 15 minutes; 5.  Unit symbol display, easy to read; backlight display; 6.  Insulation Resistance Test, True RMS, non-contact voltage detection, inductance, frequency/duty cycle, and data hold function.  Technical specifications: Basic function Range Accuracy DCV 600mV/6V/60V/600V/1000V ±(0.5%+5) ACV 6V/60V/600V/750V ±(0.8%+10) DCA 6mA/60mA/600mA/6A/20A ±(1.0%+5) ACA 6mA/60mA/600mA/6A/20A ±(1.5%+10) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+2) Capacitance 60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Inductance 6mH/60mH/600mH/6H/60H/100H ±(1.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/60kHz ±(1.0%+3) Insulation 500MΩ for 500V, 20GΩ for 1000V ±(4.0%+2) Temperature -40℃~1000℃ | -40℉~1832℉ ±(1.0%+5) Special function:  Max. display 6000 Safety level CAT. III 600V True RMS √ NCV √ Function Protect √ Diode test √ Continuity test Warning sound when less than 50Ω Duty cycle measuring √ Data hold √ Backlight display √ Max-Min MAX., MIN. value and difference value between MAX and MIN Auto power off Approx.15minutes Low battery indication Approx. less than 7.6V Input impendence 10MΩ Sampling rate 3times/s AC frequency response 40Hz-2kHz Operation way Manual or auto range LCD size 65×40mm Power 6x1.5V AA battery Power dissipation Quiescent current approx. 6mA  General Info: Color Orange holster and Grey device Weight 480g (including battery) Meter size 200mm×92mm×50mm Standard accessory TL98A test leads, TL1358 crocodile clips test leads, TP01 temperature probes, 6pcs 1.5V AA battery, English manual, Black handbag. Packing Gift box Quantity per carton 20pcs Carton size 46.5*31.5*29.0cm GW per carton 17.0kg  

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?