成都微敦信财贸易有限公司

Product Description: WD001 is a tough, resilient modified bitumen membrane manufactured to Weidun Specifications. Its core is a strong polyester that is coated with flexible SBS polymer-modified bitumen. Uses: WD001 Bitumen Membrane is designed for new roofing and re-cover applications, as well as in the construction of flashings. WD001 Bitumen Membrane is an ideal roofing membrane in Weidun modified bitumen systems.  Advantages: Durability - The membrane combines the strength of polyester reinforcement with the elongation of SBS-modified bitumen.Ease of use - Torch-applied is a mature method of applying the membrane.Lighter weight - The membrane weighs less than 4.5 kg per square meterWarranties - Product warranties and guarantees are available. Contact your sales representatives for detailed information.Product Application:   Torch-applied  Storage and Handling: To prevent damage, support rolls on end in an upright position and store in a clean, dry location. Cover as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.   Product Specifications:  Roll Size* : 10.0 m2 Roll Length: 10.0m Roll Width: 1.0m Roll Thickness 3.0mm; 4.0mm Rolls per Pallet 30 Full Pallet Weight: 1.5 tons Top side Surfacing PE Film or Aluminum Bottom Side Surfacing: PE Film  Note: Actual membrane dimensions are customizable; please contact your sales representative for support.   

SBS Bitumen Waterproofing Membrane

SBS Bitumen Waterproofing Membrane for roofing and construction

Product Description: Weidun® 002 Self-adhesive Membrane is a self-adhesive bituminous sheet waterproofing membrane. It's based on an SBS modified bitumen compound on a PE or aluminum film, formulated for hot and tropical climates.  Uses: Weidun® WD002 Self-adhesive Membrane is designed for the exterior of external walls and re-cover applications, as well as for the construction of any kind of roof waterproofing system. It is safer to apply since no open flame is required.  Advantages: Durability - The membrane combines the strength of fiberglass reinforcement with the elongation characteristics of SBS modified bitumen. Cold apply - No torch or open flame required. Save labor - rolls out flatter and provides easy installation. Lighter weight - The membrane weighs less than 4.5 kg per square meter.  Product Application: Cold-applied Note: Bitumen primer or cement mortar must be applied to the surface before the Self-adhesive membrane is used.    Storage and Handling: To prevent damage, support rolls on end in an upright position and store in a clean, dry location, covering as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.  Product Specifications:  Roll Size* : 20.0 m2 Roll Length: 20.0m Roll Width: 1.0m Roll Thickness 1.2mm; 1.5mm Rolls per Pallet 30 Full Pallet Weight: 1.3tons Top side Surfacing PE Film or Aluminum Bottom Side Surfacing: PE Film  Note: Actual membrane dimensions are customizable; please contact your sales representative for support.  Property        Standard Minimum Value            Weidun's ValueTensile strengthat 23℃ +/-2 (N/50mm)   &gt;200278Elongation at break at 23℃ +/-2℃, (%)  &gt;3048Tear strength at 23℃ +/-2℃ （N/50mm) &gt;2535Peal strength of membrane and mortar (N/mm) &gt;1.51.6Low-temperature flexibility, at -20 ℃No dropNo dropWater penetration(Maintain a water pressure of 0.3Mpa for 30 minutes)Non-penetrationNon-penetration 

Self-adhesive Bitumen Membrane

Self adhesive Bitumen Membrane for waterproofing roofs and walls

钧曜有限公司

   These are materials used to make a surface impervious to water.   It comes in a milk-character liquid that woud solidify into a transparent membrane.   Possesses a boiling point of 100 degrees celcius.   Water soluble and non-flammable.   Simple method of usage by mixing it with water.   No harmful substances that would cause health problems.  

Waterproofing Material

Waterproofing Material for creating water impervious surfaces

產品描述： Weidun® 002 自粘卷（全稱：自粘性瀝青防水卷材）是一種具備自粘膠層的冷施工防水材料，撕除隔離膜後可直接與基面粘結，無需明火與輔助材料。   使用場景： Weidun® WD002 自粘卷适用于平屋面，斜屋面，地下室和管廊隧道防水。  性能優勢： 耐久性 - 卷材結合玻璃纖維加固層嘅強度，同SBS改性瀝青嘅高延展特性。 冷施工 - 無需使用火槍或明火，杜絕施工風險。 省人力 - 鋪設平整順暢，安裝簡便快捷。 輕量化 - 每平方米重量少過4.5公斤。  施工方法： 鋪設自粘卷材前，必須先在基面塗刷瀝青底漆或水泥砂漿。    存放方法: 應將產品存放於通風、避光之處，並保持直立擺放，以減少環境變化對產品造成損壞。  卷裝尺寸： 卷裝尺寸*：20.0 平方米每卷長度：20.0 米卷材寬度：1.0 米卷材厚度：1.2毫米 / 1.5毫米每棧板卷數：30 卷整板重量：1.3 公噸表面層材質：PE 薄膜 或 鋁箔底面層材質：PE 薄膜  技術參數: Property     Standard Minimum Value            Weidun's Value抗拉強度 23℃ +/-2 (N/50mm)   &gt;200278最大斷裂延伸率 23℃ +/-2℃, (%)  &gt;3048抗撕裂強度 （N/50mm) &gt;2535卷材與水泥砂漿剝離強度 (N/mm) &gt;1.51.6低溫柔性 -20 ℃不流淌不流淌抗滲水性（保持7日，1.5巴水壓）不透水不透水 

自粘瀝青卷  自粘卷 免火卷

Weidun WD002 self adhesive waterproofing membrane

Product Description: Weidun 006 HDPE Waterproofing Membrane isclosely integrated with a concrete substrate, providingthe best waterproofing performance. HDPE membrane is widely used in underground and basement waterproofing projects. Uses: Weidun 006 HDPE Waterproofing Membrane is designed for areas that require waterproofing, such as basements, undergrounds, terraces, and green roofs.  Advantages: The membrane fully bonds with concreteMaintain high peel strength in soakingLength and width can be customizedNo open flame required Product Application: Self-adhesive on the substrate and use hot-weld equipment to seam the overlap.  Storage and Handling: To prevent damage, support rolls on end in an upright position and store in a clean, dry location. Cover as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.  Product Specifications: Roll Size* : 20.0 m2 Roll Length: 20.0m Roll Width: 1.0m Roll Thickness 1.2mm; 1.5mm Top side Surfacing PE Film or Sand Bottom Side Surfacing: PE Film or Self-adhesive Glue  Technical Data SheetProperty Standard Minimum Value Weidun Value Roll Length min(m) 10 10.01 Tensile Strength at 23°c (N/50mm) 300 357 Elongation at 23°C +/-2°C, (%) 300 400 Adhesive strength at 23°C (N/50mm) 1.5 1.5 Low temperature flexibility, at-20°C No crack No crack Peel strength between membrane and overlap (N/mm) 1.0 1.0 Puncture resistance (N) 350 398 Oil permeability/number of sheets 0 0 Heat resistance, at 80°C, 2 hours No drop No drop Water penetration (Maintain a water pressure of 0.3MPa for 120 minutes) Non- penetration Non-penetration 

HDPE Waterproofing Membrane

HDPE Waterproofing Membrane for effective basement and underground waterproofing.

DescriptionProduct Description: Weidun®LQ004 Polyurethane Water-based Liquid Membrane is a safe and environmentally friendly, highly cost-effective liquid product widely used to prevent indoor leakage and moisture.  Uses: Weidun®LQ004 Polyurethane Water-based Liquid Membrane is designed for areas that require waterproofing, such as toilets, bathrooms, ponds, and roofs.  Advantages: Excellent waterproofing and immersionWeather-resistant and high elongationEnvironmental friendlyOne-component, easy to applyStorage and Handling: To prevent damage, store liquid emulsion and cement in a clean, dry location, covering as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.  Product Specifications: Bucket Size* : 20 L Bucket Height: 10.0m Bucket Diameter: 1.0m Buckets per Pallet: 30 Full Pallet Weight: 800 Kg Bucket Materials: Plastic 

Polyurethane Water-based Liquid Membrane

Polyurethane Water based Liquid Membrane for waterproofing applications

Product Description: Weidun®LQ003 Polymer Cement Liquid Membrane is a safe and environmentally friendly, highly cost-effective liquid product widely used to prevent indoor leakage and moisture.  Uses: Weidun LQ003 Polymer Cement Liquid Membrane is designed for areas that require waterproofing, such as toilets, bathrooms, ponds, and roofs.  Advantages: Excellent waterproofing and immersionWeather-resistant and high elongationEnvironmental friendlyEasy to apply Storage and Handling: To prevent damage, store liquid emulsion and cement in a clean, dry location, covering as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.   Product Specifications: Bucket Size* : 20 L Bucket Height: 10.0m Bucket Diameter: 1.0m Buckets per Pallet: 30 Full Pallet Weight: 800 Kg Bucket Materials: Plastic  Technical Data SheetProperty Standard Minimum Value Weidun Value Solid content (%) 70 72 Tensile strength No treatment (Mpa) 1.2 1.3 Heat treatment retention rate (%) 80 86 Immersion treatment retention rate (%) 60 68 Elongation at break (%) No treatment 200 225 Heat treatment 150 167 Immersion treatment 150 158 Adhesive strength (MPa) No treatment N/A 0.6 Heat treatment N/A 0.8 Immersion treatment N/A 0.7 Low temperature flexibility, at -10°C No crack No crack 

 Polymer Cementitious Waterproofing Coating

Polymer Cementitious Waterproofing Coating for effective moisture prevention

We are the sole agent of Australia made waterproofing material for used in the field of Building Construction. The brand name is “SHALEX SEALIT”. There are all together five products with different usage and different solution for waterproofing project.  The products are :  1. SHALEX SEALIT Multipurpose which is a base paint that used as prima for the others products. It will penetrate into the pores of the concrete to form a stopper so that to stop water getting through. It is made of Acrylic and is an ECO product. It has passed the BS6920-2014 test and can be used in water tank and swimming pool. And in the ASTM E514/D514M it passed with grade E (excellent)  2. SHALEX SEALIT Glaze is the finish layer apply after the Multipurpose if no other cover layer is being apply to. It is quite hard when it dry so to protect the surface. It is slightly shine when dry and transparent. Able to withstand UV. It is made of Acrylic and is an ECO product. It has passed the BS6920-2014 test can be used in water tank and swimming pool.  3. SHALEX SEALIT Membrane is made of Acrylic and is an ECO product, it is a thick milky serum which is good for Dampcourse. It also act as the sealant agent for crack happened in the concrete. It is semi-transparent when dry.  4. SHALEX Stickit is made of Acrylic and is an ECO product. It is used to repair loose object such as tiles; render; small crack on wall……No need to take off the defected substrate, just used the apparatus that provided to stick whatever loose area.  5. SHALEX Waterproof It – it is made of Acrylic and is an ECO product. It is in grey color. Complies with AS4858 Class III membrane. A safe to use one component product. It is highly flexible, accommodate movement and minor cracking in substrate – over 300% elongation. Permanently flexible, excellent resistance to embrittlement. It able to withstand UV, can be used on metal surface. It has passed the test of D624, D638, D570, D882 and D412  

SHALEX SEALIT 【Video】

SHALEX SEALIT waterproofing material for building construction

 This is a water-based general purpose waterproofing compound designed for use on a wide variety of substrates. It is especially suitable for sealing and protecting porous vertical masonry surfaces such as split-faced or decorative concrete blocks. 
 
  Dries to a clear low sheen finish. 
  Remains flexible to accommodate minor movement. 
  Can be over-painted with any acrylic paint. 
  Suitable as a primer for acrylic architectural topcoats, elastomerics and roofing paints. 
 

Waterproofing Compound

Waterproofing Compound for sealing and protecting masonry surfaces

Product Description: Weidun®LQ006 Polyurethane Solvent-Free Liquid Membrane is a liquid-applied polyurethane waterproofing membrane, featuring a solvent-free, highly permanent, elastic, cold-applied, and cold-curing design, making it a single-component system for long-lasting waterproofing.  Uses: Weidun®LQ06 Polyurethane Solvent-Free Liquid Membrane is designed for waterproofing areas that require hygienic-sensitive environments, such as potable Water Facilities, food industries, and corrosive environments.  Advantages: - Single component-Easy to use and sprayable - Handle full water immersion conditions - Impervious to water and aqueous chemicals - Solvent-free -suitable for portable water tank waterproofing  Storage and Handling:  To prevent damage, maintain proper ventilation in the storage area in a clean, dry location, covering as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.  Product Specification: Pail Size* 25L Pail Height 340.0mm Pail Diameter 270mm Pail Weight 25.0 kg Pails per Pallet 64 Full Pallet Weight 1.6 ton Technical Data SheetProperty Standard Minimum Value Weidun Value Solid content (%) 85 86.2 Surface dry time (%) 12 7 Through dry time (hour) 24 12 Tensile Strength at 23°C (N/50mm) 2.0 2.1 Elongation at 23°C +/-2°C, (%) 500% 580 Adhesive strength at 23°C(N/50mm) 1.5 1.5 Low temperature flexibility, at -35°C No crack No crack Water absorption (%) 5 3.3 Shore A hardness after 7 days 65 65 Crack bridging ability under standard conditions (mm) 4 4.22 Water penetration (Maintain a water pressure of 1.5bar for 7 days) Non-penetration Non-penetration  

Polyurethane Solvent-free Waterproofing Coating

Polyurethane Solvent Free Waterproofing Coating for hygienic environments

Product Description: Weidun® 008 EVA Waterproofing Membrane is a high-quality geotechnical composite material made from Ethylene-Vinyl Acetate copolymer. Designed for durability and flexibility, this membrane offers excellent waterproofing, puncture resistance, and chemical stability.   Uses： This versatile membrane is engineered for a wide range of applications, including but not limited to: Tunnel Engineering: Primary and secondary lining waterproofing for railways, highways, and subways. Underground Construction: Basements, sub-basements, and retaining wall protection. Landfill &amp; Waste Containment: Protective lining to prevent leachate contamination. Infrastructure: Bridge deck waterproofing and culvert linings. Mining: Heap leach pads and tailings storage facilities.  Product Advantages High Flexibility &amp; Elongation: The EVA formulation maintains excellent flexibility at low temperatures, allowing it to conform to irregular surfaces and accommodate structural settlement or cracking without tearing. Superior Chemical Resistance: Exhibits strong resistance to acids, alkalis, oil, and microbial corrosion, ensuring long-term performance in aggressive soil and water environments. Excellent Physical Properties: Features high tensile strength and puncture resistance, providing a robust barrier against sharp aggregates and construction stress. Environmentally Friendly:Non-toxic and free from volatile components, making it safe for use in potable water applications. Ease of Installation: Lightweight and flexible, it is easy to handle and install. Compatible with hot-wedge and extrusion welding techniques for secure, watertight seams.  Storage and Handling: Store in a clean, dry, and level area away from sharp objects that could puncture the material. Store in a cool, well-ventilated area. Avoid exposure to open flames or high-temperature environments. Keep away from solvents, fuels, grease, and extreme heat sources.   Technical Data Sheet Property  Standard Min Value     Weidun ValueLength         N/A      CustomizableTensile strength at + /- 2℃ 23℃ （Mpa)         15         18Elongation at + /- 2℃ 23℃ （%)         500         650Puncture resistant at + /- 2℃ 23℃ (1.0mm,N)         200         230     

EVA Waterproofing Membrane

EVA Waterproofing Membrane for durable and flexible waterproofing solutions.

Weidun® LQ008 Single-component pure Polyurea offers the ultimate protection for a wide range of coating needs. It is extremely resistant, waterproof, and instantly cured elastomeric coatings.  Uses: Weidun® LQ008 Single-component PurePolyureais designed for areas that require waterproofing, such as basements, stadiums, dams, ponds, water parks, and green roofs.  Advantages: ✅ Traffic-Resistant Surface: Holds up under active foot traffic. ✅ Permanent Waterproofing: Withstands long-term immersion in water. ✅ 15+ Year Exterior Durability: Excellent UV resistance for exposed conditions. ✅ High Strength &amp; Flexibility: Superior tensile strength and elongation to prevent cracking. ✅ Ease of installation: Can be hand-brushed.   Product Application: Can be brushed by hand. Please contact your sales representative for detailed information.  Storage and Handling: To prevent damage, support rolls on end in an upright position and store in a clean, dry location. Covering as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.  ProductSpecifications: Drum Size  200 L Drum Weight  200 kg  Technical Data Sheet Property Standard Minimum Value Weidun Value Solid content (%) 98 99.8 Tensile strength at 23℃ (Mpa) 15 19 Elongation at 23℃ +/-2℃, (%) 300 320 Surface dry time at 23℃ +/-2℃, (s) 120 38 Low-temperature flexibility, at -40 ℃                         No crack No crack Tear strength at 23℃ +/-2℃, (N) 450 621 Shore A hardness         80 90 Adhesion strength at 23℃ +/-2℃, (Mpa)         2.0 2.8 

Single-component Pure Polyurea 

Single component Pure Polyurea for ultimate waterproofing protection

火烤卷 Bitumen卷 瀝青卷

WD001 is a durable modified bitumen membrane for roofing.

产品介绍： Weidun®LQ006聚氨酯无溶剂液体防水膜，系一款即用型液态聚氨酯防水塗層 。采用无溶剂配方，具有永久弹性、可常温施工、常温固化，单组份设计，提供持久高效嘅防水保护。  适用地方： Weidun®LQ06 本产品专为对卫生要求高嘅场所防水而设计，例如饮用水设施、食品工业厂房，同埋其他潮湿或具腐蚀性环境。  产品优点：  单组份设计——开罐即用，可喷涂或辊涂，施工简便可长期浸水使用，防水性能持久抵挡水同各类水性化学物质无溶剂配方——安全环保，适合饮用水池等接触水体嘅防水工程 储存同处理:  请存放喺清洁、干爽、通风嘅地方，避免日光直射同极端温度。使用前后要盖好罐口，防止杂物同潮气进入。施工同储存期间，请注意环境条件，确保安全。  尺寸参数: Pail Size* 20L Pail Height 340.0mm Pail Diameter 270mm Pail Weight 20.0 kg Pails per Pallet 64 Full Pallet Weight 1.6 ton 产品技术参数Property Standard Minimum Value Weidun Value Solid content (%) 85 86.2 Surface dry time (%) 12 7 Through dry time (hours) 24 12 Tensile Strength at 23°C (N/50mm) 2.0 2.1 Elongation at 23°C +/-2°C, (%) 500% 580 Adhesive strength at 23°C(N/50mm) 1.5 1.5 Low temperature flexibility, at -35°C No crack No crack Water absorption (%) 5 3.3 Shore A hardness after 7 days 65 65 Crack bridging ability under standard conditions (mm) 4 4.22 Water penetration (Maintain a water pressure of 1.5bar for 7 days) Non-penetration Non-penetration  

聚氨酯防水塗層

Weidun LQ006 waterproofing membrane with high tensile strength

it is made of Acrylic and is an ECO product. It is in grey color. Complies with AS4858 Class III membrane. A safe to use one component product. It is highly flexible, accommodate movement and minor cracking in substrate – over 300% elongation. Permanently flexible, excellent resistance to embrittlement. It has passed the D624, D638, D570, D882, D412 tests. 它是用聚丙烯做的而且是環保材料. 是一種灰色的薄膜, 合乎 AS4858標準的第三級最高標準的薄膜要求. 是單一結構材料合乎安全使用, 有很高的彈性, 可迎合物料在裂開時的伸展力, 有300%的伸力. 永久有彈性, 有極脆性能. 已過D624, D638, D570, D882, D412的測試. 

Shalex Sealit Waterproof It

Shalex Sealit Waterproof It is an eco-friendly waterproofing solution.

It is used as prime for our other product. It form a stopper to prevent water pass through. It has passed the BS6920-2014 test.

Shalex Sealit Multipurpose (Base)

Shalex Sealit Multipurpose Base Layer for waterproofing

 	 Basic layer for waterproofing on concrete, cement board, masonry, wood dry clear and penetrative agent.  

Multipurpose Base Layer

Multipurpose Base Layer for waterproofing various surfaces

This waterproof material is finely packed in a durable barrel. It is manufactured under strict QC to promise quality you can rely on. This waterproof material is ideal for tents.
 
  SHALEX glaze. 
  Featured in the caravan world. 
  For tents. 
 

Waterproof Material

Waterproof Material for tents and construction applications

Foshan Qijun Polymers Co.,Ltd

Butyl waterproof tape

產品描述： Weidun®LQ003 英泥質防水塗層为抗濕熱性能通過加速老化測試（≥10年耐久性） 可抵禦華南地區年均95%濕度環境，解決「回南天」結露難題。  使用場景：  住宅項目：廚衛地台、外牆內側防潮層 商業空间：酒店浴室、數據機房防結露處 特殊區域：地鐵上蓋物業變形縫補強  性能優勢： 雙重環保保障 零甲醛、無溶劑配方  粵港地區適配性 抗濕熱性能通過加速老化測試（≥10年耐久性） 可抵禦華南地區年均95%濕度環境，解決「回南天」結露難題  經濟施工方案 每毫米厚度覆蓋成本較傳統瀝青材料低40% 支持瓷磚膠直接粘貼，免除界面處理工序  存放方法: 應將產品存放於通風、避光之處，並保持直立擺放，以減少環境變化對產品造成損壞。   桶装尺寸： 桶尺寸*：20.0 L  Technical Data SheetProperty Standard Minimum Value Weidun Value Solid content (%) 70 72 Tensile strength No treatment (Mpa) 1.2 1.3 Heat treatment retention rate (%) 80 86 Immersion treatment retention rate (%) 60 68 Elongation at break (%) No treatment 200 225 Heat treatment 150 167 Immersion treatment 150 158 Adhesive strength (MPa) No treatment N/A 0.6 Heat treatment N/A 0.8 Immersion treatment N/A 0.7 Low temperature flexibility, at -10°C No crack No crack   

英泥質防水塗層

SHALEX SEALIT Multipurpose which is a base paint that used as prima or along to give a good resolution of waterproofing. It can also used before other water based product. It will penetrate into the pores of the concrete to form a stopper so that to stop water get through. It is made of Acrylic and is an ECO product. It has passed the BS6920-2014 test and the ASTM514/E514 test of prevent water penetration and leakages test with excellent result. 這是底油, 可獨立使用或用作其他產品的底油以便完成防水工作, 它會滲透入石屎的毛細孔凝固成一個塞子以防止水通過. 它是用聚丙烯環保材料, 己取得BS6920-2014証書及ASTM514/E514防水浸透測試的優異成績. 

Shalex Sealit Multipurpose (base layer)

Shalex Sealit Multipurpose base layer for waterproofing

Weidun®️005 TPO Roofing Membrane refers to thermoplastic polyolefin, a type of single-ply roofing membrane material. It’s commonly used in commercial and residential roofing applications. TPO roofing is known for its durability, flexibility, and resistance to ultraviolet light and chemical exposure. Uses Weidun 005 TPO Roofing Membrane is considered a good option for single-ply roofing systems due to its excellent physical properties, ease of installation, and minimal maintenance requirements. Advantages Highly durable and resistant to punctures, tears, and impacts. Excellent resistance to UV radiation, ozone, and chemical exposure, ensuring longevity. Flexible, allowing for easier installation and adaptability to a variety of roof designs and shapes. Heat-welded seams create strong bonds, enhancing the overall strength of the roofing system. Recyclable, making it an environmentally conscious choice compared to some other roofing materials.  Storage and Handling To prevent damage, support rolls on end in an upright position and store ina clean, dry location, covering as necessary to protect from environmental damage. Monitor environmental conditions during storage. Product Specifications Roll Size* 20.0m Roll Length 10.0m Roll Width 2.0m Roll Thickness 12mm; 1.5mm Top side Surfacing Smooth; Fleeced-back Bottom Side Surfacing Smooth; Self-adhesive  Technical Data Sheet Property Standard Minimum Valve  Weidun Value Elongation at 23℃ +/-2℃, (%) 500 500 Low-temperature flexibility, at -10 ℃                         No crack No crack Water penetration ( Maintain a water pressure of 1.5bar for 7days )  Non-penetration  Non-penetration Angle Tear Strength (N/mm) 65 67 Thermal Treatment Dimensional Change Rate (%) 4 2.8 Joint Peel Strength (N/mm) 8 6 Tensile Strength at 23℃ (Mpa) 15 15.8 

TPO Sheet Membrane

TPO Sheet Membrane for durable and flexible roofing solutions

 This is clear waterproof coating designed to enhance and protect a wide range of porous surfaces. It is low-odor, low-VOC coating formulated on self cross linking nanopolymers. It has many benefits over traditional acrylic coating such as excellent early water and blush resistance, short drying time, superior exterior durability, low dirt pickup, excellent adhesion and resistance to a range of harsh chemicals. 
 
  Can be applied to damp surfaces and also has good resistance to &lsquo;green concrete&rsquo;. 
  Non-yellowing. 
  Demonstrates resistance to hot tyre pickup. 
  Performs well in demanding situations like wet areas and pools surrounds. 
  Can be used for a wide range of projects where a clear hard protective finish is required. 
 

Waterproof Coating

Waterproof Coating enhances and protects porous surfaces.

Weidun® LQ002 Sprayable Polyurea offers the ultimate protection for a wide range of coating needs. It is extremely resistant, waterproof, and instantly cured elastomeric coatings.    Uses: Weidun LQ002 Sprayable Polyurea is designed for areas that require waterproofing, such as basements, stadiums, dams, ponds, water parks, and green roofs.  Advantages: ✅ Traffic-Resistant Surface: Holds up under active foot traffic. ✅ Permanent Waterproofing: Withstands long-term water immersion. ✅ 15+ Year Exterior Durability: Excellent UV resistance for exposed conditions. ✅ High Strength &amp; Flexibility: Superior tensile strength and elongation to prevent cracking.    Product Application: Spray with professional spraying equipment. Please contact your sales representative for detailed information.  Storage and Handling: To prevent damage, support rolls on end in an upright position and store in a clean, dry location. Covering as necessary to protect from environmental damage. Monitor environmental conditions during storage, handling, and application.  ProductSpecifications: Drum Size  200 L Drum Weight  200 kg  Technical Data Sheet Property Standard Minimum Value Weidun Value Solid content (%) 98 99.8 Tensile strength at 23℃ (Mpa) 15 18 Elongation at 23℃ +/-2℃, (%) 500 650 Surface dry time at 23℃ +/-2℃, (s) 120 38 Low-temperature flexibility, at -40 ℃                         No crack No crack Tear strength at 23℃ +/-2℃, (N) 450 621 Shore A hardness           80 90 Adhesion strength at 23℃ +/-2℃, (Mpa)           2.0 2.8 

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?