E-Label Solutions Company Limited

Base Station Product Code: E-A05 433MHz Transmission Technology Includes power adapter &amp; cables ~50m Transmission Distance Product Dimensions: 125mm * 110mm * 68mm 

Industrial Grade Base Station

Industrial Grade Base Station with 433MHz technology

Okystar Technology Co Ltd

 	 Wireless Bluetooth RF Transceiver Module serial RS232 TTL HC-05 	 Support Master and Slave mode, modify by AT commander 	 This Module can easily transfer the UART data through the wireless Bluetooth 	 Without complex PCB layout or deep knowledge in the Bluetooth software stack 	 You can combine this Bluetooth module with your system  Specifications: 	 Size: 37 x 17(L x W) 	 Operating Voltage: 3.3V 	 Operating Frequency Band: 2.4GHz unlicensed ISM band 	 Bluetooth Specification: V2.0+EDR 	 Output Power Class: Class 2 	 Flash Memory Size: 8Mbit  

HC-05 Wireless Bluetooth RF Transceiver Module Serial RS232 TTL HC05 for Arduino

HC 05 Wireless Bluetooth RF Transceiver Module for Arduino

Hanri lighting Co.,Ltd.

DESCRIPTIONWhen distance between gateway and light is too long(eg, greater than 200 feet), Range Extenders can be added between Gateway and lights, They amplify and reinforce the signals between all system devices, functioning as a ''mesh network''. Signal quality can be weakened by obstacles (walls, terrain, trees, etc,), temporary interference (other signals,static, electrical noise, magnetic fields, etc,), climate factors and more. For a stable setup, you must prevent sections of your bt network from losing connection by establishing a robust chain of range extenders (RE). Each extender is tied to one network only. When several networks exist on the same property, independent groups of extenders will be required for each network.   Hanri SMRESurface mounted range extender ideal for use in hardscape areas or on the exterior walls of structures. Installed where spacing between fixtures is significant, where elevation or obstructions might interupt signal and simply to strengthen the overall network. Mounting ears for attachment to vertical surfaces.5' wire lead.Add removable ½" threaded base to attach to RMB canopy mount or another base.Indicator light displays green when RE is active in a network.I watt.TypeRange ExtenderInput Voltage12V AC/DCControlWireless data transmission, app controlledOperating Frequency2403MHz x 2480MHzTransmission Range230 Ft. Max.HousingPolycarbonateWire5 inch ,18 AWG SPT-2WUsageFor lamps ONLYWarrantyFive year warrantyIP65 

Range Extenders BLE

Range Extenders BLE for amplifying signals in mesh networks

小未科技 (珠海) 有限公司

The ZigBee 3.0 Smart Gateway is a powerful IoT hub designed to connect and manage ZigBee smart devices through both 2.4GHz Wi-Fi and 10/100M Ethernet connections. Serving as the central controller of a smart home system, it enables seamless communication between ZigBee sensors, switches, lighting, security devices, and mobile applications, delivering a stable, reliable, and intelligent home automation experience. Supporting the ZigBee 3.0 protocol, the gateway provides excellent compatibility with a wide range of ZigBee devices and allows up to 128 sub-devices to be connected simultaneously, making it suitable for residential, commercial, hotel, office, and smart building applications. Users can choose either Wi-Fi or wired Ethernet networking according to different installation environments. The Ethernet connection offers enhanced stability, lower latency, and stronger anti-interference performance, making it ideal for projects requiring continuous and reliable communication. The gateway supports Bluetooth (BLE) provisioning for quick and easy network configuration, while remote OTA firmware upgrades ensure devices remain updated with the latest features and security improvements. Designed with an automatic recovery mechanism, the gateway performs a physical restart if abnormal operation is detected for more than three minutes, significantly improving long-term reliability and system stability. With its compact ABS housing and low power consumption, the gateway can be easily installed in homes, apartments, hotels, offices, retail stores, and smart community projects. It serves as the intelligent bridge connecting sensors, lighting, climate control, door locks, curtains, and other ZigBee-enabled devices into one unified smart ecosystem. Ideal for smart home brands, IoT solution providers, system integrators, distributors, telecom operators, and OEM/ODM projects. Key FeaturesZigBee 3.0 smart home gatewaySupports both Wi-Fi and wired Ethernet networkingConnects up to 128 ZigBee devicesBLE quick network provisioningRemote OTA firmware upgradeStable wired communication with RJ45 Ethernet portReliable ZigBee mesh networkingAutomatic abnormal operation recoveryCompact, low-power industrial designWide compatibility with ZigBee smart devicesEasy installation and deploymentOEM &amp; ODM customization supported

ZigBee 3.0 Smart Gateway with Wi-Fi & Ethernet | Wireless IoT Hub Supporting Up to 128 ZigBee Devices

ZigBee 3.0 Smart Gateway with WiFi and Ethernet support

Karin Technology Holdings Ltd

BT V4.0 / M0 MCU PCB Antenna QDIQ Support

Bluetooth Low Energy 4.0 Module (Nordic)

Sing Sun Technology (International) Limited

We are a manufacturer focused on anti-loss bluetooth trackers. We also provide PCBA solutions to integrate anti-loss tracking functionality into various industry products for our customers. Currently, our products have been applied in various product fields, such as bicycle lights, bicycle frames, luggage locks, wallets, pet collars, and more. Any innovative ideas and is looking to integrate anti-loss tracking features into your products, we would be happy to discuss potential cooperation. We offer excellent PCBA solution services that can help meet the intelligent needs of your products, enhancing their appeal and boosting their market competitiveness. We have an experienced engineering team capable of providing embedded design services to help customers integrate the Find My Anti-lost functionality into the products. Throughout the process, we can offer a comprehensive range of turnkey services, including registration, compliance, technical design, testing, and verification. The final deliverable to the customer is the PCBA.

MFI Findmy Anti-Lost Nordic SiNE Tag Smart Tracker PCBA Turnkey Solution

MFI Findmy Anti Lost Nordic SiNE Tag Smart Tracker

 	 USB to serial chip CH340G Controller ATmega328P-AU&nbsp; 	 Input Voltage (recommended) 7-12V&nbsp; 	 Digital IO pins 54 (of which 15 provide PWM output)&nbsp; 	 Analog input pins 16 DC Current per I/O Pin 40 mA SRAM 8 KB&nbsp; 	 Clock Speed 16 MHz&nbsp; 	 Operating voltage 5V&nbsp; 	 Input Voltage (limits) 6-20V&nbsp; 	 PWM channel 15&nbsp; 	 Flash Memory 256 KB of which 8 KB used by bootloader  

Mega 2560 R3 CH340G

Mega 2560 R3 CH340G with USB to serial chip

宏オ拓展有限公司

This Signal Repeater is a power device to extend the transmission distance.
<ul>
	<li>SUB-1G RF frequency 868MHz or 915MHz wireless transmission</li>
	<li>Extend the transmission distance up to 300m / 1000ft from transmitter(s) to receiver(s)</li>
	<li>Place the Signal Repeater in the middle of the transmitter and receiver</li>
	<li>The LED indication will lit when receive a valid signal from the transmitter and the receiver will then receive the signal from the repeater</li>
	<li>Can be wall mounted or table stand</li>
	<li>Simple operation, just place and usePower On / Off button &nbsp;</li>
</ul>


Wireless Signal Repeater

Signal Repeater extends wireless transmission distance up to 300m

NST Technology Limited Co.,Ltd

 	 A Wireless data transmission network platform 	 1. Short delay:300 modules as an example of automatic networking time in the 15s, single instruction data transmission time of 200ms to achieve a maximum of 6 hops (the system will automatically optimize the transmission time, so that the efficiency of the ultimate); 	 2. Take collision avoidance strategy, and by using frequency hopping mechanism flexible,effectively avoid the failure caused by system channel congestion and interference,and will send command data to specify the receiving device to complete the confirmation signal feedback sign with re transmission mechanism in transmission system; 	 3.Any node can switch to the center node, put an end to the center node failure caused the failure of the entire network; 	 4. In this micro module up to form 380 network node equipment; 	 5. Every time the signal transmission path between the nodes are re optimized, without recording road; 	 6. Diameter transfer table, put an end to a node due to failure due to transmission failure.  

A Ad HOC Network Module

A Ad HOC Network Module for wireless data transmission

Shenzhen Xuanhuo Tribe Technology Co.,Ltd

 	 2.4GHz Dual Mode WiFi + Bluetooth Development Board 	 Ultra-low power consumption, works perfectly with the Arduino IDE 	 Support LWIP protocol, Freertos 	 Support Three Modes: AP, STA, and AP+STA 	 ESP32 is a safe, reliable, and scalable to a variety of applications  

ESP32 Demoboard

ESP32 Demoboard with WiFi and Bluetooth capabilities

Sollae Systems Co.,Ltd.

CSW-B85 is a Serial to WLAN converter board that is designed to be convenient to apply in user's system. This board type product helps your serial devices simply add wireless network connectivity. Supporting RS232/RS422/RS485 and LVTTL serial interfaces, CSW-B85 is available to be applied in a variety of devices due to its high extension. Furthermore, it features electrical durability and minimizing maintenance/repair cost with an ESD circuit. Since CSW-B85 is embedded with not only a chip antenna but also a socket for an external antenna, it can be used in various wireless network environments.
 
  Serial to WLAN converter board. 
  Supports various interfaces of a serial port (RS232/RS422/RS485/LVTTL). 
  Chip antenna and a socket for an external antenna embedded (selectable). 
  Interface for indicating the level of wireless LAN signal embedded. 
  ESD circuit for product protection embedded. 
  Provides 2.5mm long interface for an user connector. 
 

Serial to WLAN Converter Board

Serial to WLAN Converter Board for wireless connectivity

Raytac Corp

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.  Features 	 Multi-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

Nordic nRF52832 BLE Module

WIZnet H.K. Limited

Pictured here is a WiFi gateway module equipped with 802.11b/g/n wireless networking. It also boasts a short booting time of 20 seconds. The module is also&nbsp;compliant with the CE, FCC and KCC standards.
 
  Able to implement WiFi networking without the wireless driver or OS porting. 
  Support&nbsp;AP, station and gateway modes. 
  Easy configuration. 
 

Gateway Module

WiFi gateway module with 802.11b/g/n wireless networking

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

&nbsp;

Shenzhen Kelvin Electronics Co., Ltd.

 	 Frequency: 434MHz/868MHz/915MHz, 	 Antenna type: external 	 Modulation type: FSK+LoRa 	 Working current: 16mA 	 Working voltage: 9V 	 Coding type: private learning code  

5000m Transceiver Module

5000m Transceiver Module with FSK LoRa technology

GreenPeak Technologies B.V.

This is a ZigBee silicon radio chip with a professional structure for reliable performance. It comes in a small size with integrated software, tools and reference designs for seamless integration into residential and consumer electronics applications. This radio chip has an extra-long service life. 	 GreenPeak offers the full range of ZigBee silicon solutions. 	 Combine ultra-low power, affordable total bill of material and superior range/reliability for smart home applications. 	 Ultra low-power communications chips.  

ZigBee Silicon Radio Chip

ZigBee silicon radio chip with reliable performance

立奕企业股份有限公司

 2.4 GHz Transceiver module 
 Circuit shape by PLL with a &quot; Crystal&quot; 
 With a PA(Power Amplifier) on board 
 Long distance : 1000 ~ 1200 meters
 
   Frquency range : 2400 ~ 2482 MHz   Power supply : 3V   RX sensitivity : -&nbsp;90 dBm   RX input level : + 10 dBm   TX output power : +12 dBm   Current consumption - TX : 120 mA   Current consumption - RX : 24 mA   Current consumption -&nbsp;SLEEP :&nbsp;3.5&nbsp;uA   Data rate : 1000 bps = 1M bps    2 Pin distance : 2 mm +-0.05 mm
     Application :   Remote Control   Wireless Mouse   Home / Factory automation   Wireless security &amp; access control   Battery powered wireless devices   Wireless voice / headsets / Skype earphone and VOIP  

Transceiver RF Module Board

Transceiver RF Module Board for long-distance wireless communication

深圳市源创通信技术有限公司

Bpi G1 Smart Home Controller

   CSW-M85 is a compact-sized wireless LAN converter with Ralink RT 3070 WLAN for serial devices that helps simply add wireless network connectivity to your equipment without changing software. By applying it, therefore, you can not only reduce installation/maintenance cost and risk, but shorten development time to add network capability to your system.   As CSW-M85 is embedded with a chip antenna and socket for an external antenna, it can be used for various wireless network environments.   3.3 logic level UART to wireless LAN converter.   Wireless LAN RF embedded.   Chip antenna and a socket for an external antenna embedded.   Infrastructure and Ad-hoc network.   1 port of UART with speed up to 230.4kbps available on RS232/422/485 extension.   WLAN security protocols: WEP, WPA-PSK (TKIP/AES) and WPA2-PSK (TKIP/AES).  

Serial to Wireless LAN Module

Serial to Wireless LAN Module for easy network connectivity

禾伸堂企业股份有限公司

   Sub 1GHz.   434MHz.   Wireless.   Radio frequency.   Advanced module.   Excellent performance.   High technology.   Highly reliable.   Easy integration with hardware equipment.   Wide communication range and high network reliability.   Industry standard design.  

Wireless RF module-Sub

Wireless RF module Sub with advanced performance and reliability

   Circuit shape by PLL with a &quot;Crystal&quot;.   Distance range between TRA1-A &amp; B : 400 ~ 500 meters.   Frquency range : 433.92 MHz.   Power supply : 5V DC.   ASK RX sensitivity : - 108 dBm.   FSK TX Output Power : +15 dBm.   Data rage : 300 ~ 2400 bps.   Local Oscillator is make of low cost PLL structure.   TRA1-B a match TRA1-A.   Application :Two-way Car Alarm, Security Systems, Remote Control.  

Transceiver RF Module

Transceiver RF Module for car alarms and security systems

 	 MDBT40-P is a BT4.0 &amp; BT4.1 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF581xxx SoC solution incorporates: GPIO, UART, I2C and ADC interfaces for connecting peripherals and sensors. 	 The Merit of MDBT40-P Module 	 Dual Transmission Mode of BLE &amp; RF 2.4G upon customer preference. 	 Long Working Distance (Over 80M in open space) 	 Declaration ID already included hardware and all Nordic applied profiles. 	 31 GPIO 	 FCC (USA)&amp;IC(Canada)&amp;CE(EU)&amp;Telec(Japan)&amp;KC(Korea)&amp;SRRC(China) certificate granted. 	 Fully coverage of BLE software stack including: 	 Proximity Profile; Heart Rate Profile; Health Thermometer Profile; 	 Blood Pressure Profile; Running Speed &amp; Cadence Profile; 	 HID Over GATT Profile; Alert Notification Profile; Glucose Profile; 	 Cycling Speed &amp; Cadence Profile 	 Fully support customers to suit the needs of any application!  

Nordic nRF51822 BLE Module

Nordic nRF51822 BLE Module with dual transmission mode

Shown here is an ethernet gateway module boasting simple and quick network implementation. This piece supports firmware customization for various serial devices. It can also be operated easily with the user-friendly configuration program.
 
  High stability and reliability. 
  Support serial command for on-site configuration without PC. 
  Certification: RoHS. 
 

Ethernet Module

Ethernet Module for quick network implementation and customization

ESP8266 ESP-01S Serial Wifi Wireless Module Compatible with Arduino 	 The ESP8266 microcontroller integrates a Tensilica L106 32-bit RISC processor, which is extra-low power consumption and reaches a maximum clock speed of 160 MHz.&nbsp; 	 80% of the processing power is available for the developers using.&nbsp; 	 And there&#39;s a lot of resources available for the ESP8266&#39;s development, and ESP-01S module is compatiable with Arduino.  Specification: 	 Package: DIP-8&nbsp; 	 Flash: 8Mbit 	 Dimension: 24.7*14.4*11.0mm 	 Serial/UART baud rate: 115200 	 Antenna: Onboard&nbsp; 	 Update Version of the ESP-01, totally compatible with ESP-01, while have a better performance and recommoned to replace the ESP-01 with ESP-01S  

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?