GRG METROLOGY & TEST GROUP CO., LTD.

GRGTEST has been deeply involved in the automotive field and has established a complete industrial chain testing and verification capability from materials to complete vehicles. Focusing on the technological evolution requirements of intelligent connected and new energy vehicles, GRGTESTcontinuously improves its core testing capabilities to ensure the technological iteration and product innovation of industry enterprises. 

Vehicle-mounted Electronic Product Testing

Nemko Hong Kong Limited

Nemko offer expert testing various electrical vehicle charging connector, inlet and socket according to standards IEC 61296 series, and issue CB, and N mark certificate to demonstrate compliance.  

Testing of ELVH charging connector

广州勘帝德电子科技有限公司

CandidTech is a well-known automotive vision solution provider based in Guangzhou, China, whichis set up to provide products and services to OE market, with a total area of 10,000square meters. Our current product lines cover vehicle cameras for different applications:including rear view, front view, side view and around view, Dash Cameras,Panoramic View Systems, ADAS products and the like. We own our independent R&amp;D team, three dust-free workshops and six automatic production lines, CNAS accreditedlaboratory and experienced quality management team. What's more, our company has certified byIATF16949, VDA63 and ISO 45001, and we already got theCMMI LEVEL 3 CERTIFICATEwith our software design team. The camera reach the highest IP69K waterproof protection standard, meeting the strictest quality requirements for OE Market and Aftermarket at home and abroad. For now, we continuously supply to domestic and international mainstream vehicle manufacturers like Volkswagen, Toyota, Nissan etc.CandidTech adheres to the service concept of "customized service and the pursuit of zero defects", supported by a professional quality assurance (QA) team for continuously creating more value for our customers.    

Vehicle Vision System Supplier

HENGYANG YINBEI WATCH CO., LTD

mechanic movement One-stop Service from Design to Production 

REC Green Technologies Co., Ltd.

iFCU™ has successfully attained the Platinum recognition in CIC Green Product Certification.iFCU™adopted the patented technology with rotor of a permanent magnet to generate magnetic flux. Its advantages are to eliminate the source of power loss and achieve a high energy efficient operation.By replacing mechanical brushes, permanent magnet motor can also minimize the noise level and waste heat generation, thus improves motor lifespan.With variable speed drive, the motor further enhances efficiency system compared to traditional fixed speed AC motor designs.Major Features:Variable speed FCU fully controllable “AUTO” mode is available in iFCU™, stepless variable fan speed is controlled based on room temperature set point. Reduce energy use while maintaining comfortable condition, e.g. unoccupied mode to maintain the minimal RPM and energy ussage. Programme Customization to fit client’s application/configuration Tailor-made programme to work with different system and fit the occasions requirements. Modbus Thermostat, Room control unit (0-10V), Group Control, RPM adjustment &amp; wireless group control etc. Duct type sensor Installed in return-air box to control temperature accuracy up to ± 0.5oC to increase human comfort. Both high &amp; low static Applicable to both high &amp; low static pressure setting. Wi-Fi Control Can be controlled through any mobile device. 

iFCU™ Intelligent Fan Coil Unit (EC Motor / BLDC Motor / PM Motor)

新进科技有限公司

 This high-tech machine is designed for advanced pick-and-place and bonding technology. It supports chip mount&nbsp;with the minimum size of 0201 and IC mount with fine pitch in 0.3mm of QFP. The BGA or micro BGA has a diameter of 0.4mm with a 0.8mm pitch or a diameter of 0.3mm ball with 0.5mm pitch CSP. 
 
  Flip Chip Bonding: ACF, C4 and C5 Technology. 
  Aluminum wire bonding. 
 

Pick-and-Place and Bonding Technology

Svi Public Co Ltd

We provide fully turn-key solutions that integrate innovative EMS products with quality manufacturing. Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.
 
  Covering a wide industry. 
  Experienced in this field. 
 

EMS Turn-Key

UltraOne Technologies Limited

Services and Solutions: Intelligent Lighting System, Integrated AV Control 

Central Control System

Maanshan Brightness Lighting CO LTD

We have a professional design department that can customize products according to individual needs. Each product will be designed, customized and modeled based on your requirements. At the same time, the structural design of the product is convenient for installation and disassembly, making it easy for you to install, transport, disassemble and store. Thus, it can provide various cost savings for customers in multiple aspects. All products will be checked with customers from multiple aspects such as renderings and structural diagrams to ensure they meet your most satisfactory requirements.  If you want to know more about our products and services, please feel free to contact us. 

Design and Customization Services

香港标准及检定中心有限公司 (STC)

Our Electrical Products Division offers a wide range of services to ensure the safety of office and home appliances, including: 	 Providing technical support services at different design stages 	 Offering a full scope of electrical safety testing service 	 Providing one-stop product safety testing and certification services according to customer specifications and relevant product standards, e.g. screening test for RoHS, tests for PAHs and California Energy Efficiency test  
Installation Accessories Safety Test 	 BS Plug without switch 	 13A socket outlet without switch 	 13A socket outlet with switch 	 2 way BS socket outlet adaptor 	 Mechanical Switch 	 Electronic Switch  

Installation Accessories Safety Test

大华金属制作有限公司

DAIWA offers customized signages that need to be declarated, including illuminated letters and steel letters. A feature signboard will make your store shine brilliantly.  Why Choose DAIWA？ - Compliant with Hong Kong Building Regulations; - We only use high-quality material, make sure your signboard remains fresh and durable over time. - We provide exceptional service and treat everyone with honesty – that’s our core promise.  Brand：DAIWA Optional Materials: Stainless Steel，Aluminum，Copper，Iron，Acrylic； Metal surface：Painted；Brushed, Satin or Mirror Polished (Plating are available)； Customised：YES Application：Indoor and outdoor, fit to facades, hang from canopies or bond to walls, mainly for stores. Industries：Office buildings, Hotels, Shopping Mall, Catering, hotel, medical, beauty, banks, retail and high-end industry, etc.          

Minor Works Signages Customized Signboard

Leading global provider of full turnkey box-build contract electronics manufacturing and design services to the industrial and professional electronics sectors. We have 4 factories located in Thailand, Austria, Slovakia and Hungary with 3,300 employees. 	 Industrial 	 Automotive 	 Telecommunication 	 Medical 	 Audio/video 	 etc.,  

EMS Electronic Manufacturing Services

Electronic Manufacturing Service
Our industry focus includes industrial products, high end telecommunications, office automation, professional audio and video products, automotive electronics, medical devices, etc. The advanced solutions are sure to keep you on the cutting edge.

Electronic Manufacturing Service

Unitronics Company Limited

Unitronics collaborates closely with customers and partners, understanding their needs and developing innovative solutions. We build long-term relationships based on trust, shared experience, and mutual success, enabling us to achieve business objectives together with customers.Our specialists precisely understand our customers' challenges and needs, and propose solutions to each problem through our technical support with system construction and software development, along with cooperation with the manufacturers and various know-how. We specialize in: Software DesignHardware DevelopmentFirmware Design &amp; DevelopmentApps developmentManufacturing Capabilities &amp; Support Services 

Total embedded electronic solutions

Shenzhen Huachuang hengda Technology,Ltd

The electronics manufacturing services(EMS) we provide cover almost the entire product cycle, from electronic design, prototyping, and PCB assembly, to cable and harness assembly, full system integration, product testing, and supply chain management. Our full-service electronic manufacturing services are characterized by superior quality and fast turnaround times, which enable us to meet the various project needs of our customers. 

Electronic Manufacturing Services

Nemko offer safety testing and certification of various types of vehicle charging connector, inlets, and socket outlet, ensure they comply with the standards IEC 62196 series. 

Testing of Vehicle connectors, inclets and socket outlet

 Sport Products Testing - Bike Testing 
STC is one of few testing laboratories accredited by Consumer Product Safety Commission (CPSC) &amp; China National Accreditation Service (CNAS) to perform bike testing and helmet testing under regulations 16 CFR 1512 and other national standards.
&nbsp;
Our Bike Testing services include:
 Children&rsquo;s Bike Testing Standards  	 America (16 CFR 1512) 	 China (GB 14746, ISO 8098) 	 Europe (EN 14765, ISO 8098)&nbsp;  Children&rsquo;s Bike Testing 	 Brake / Steering Testing 	 Saddles / Seat-pillars Testing 	 Frames and Front Fork Assembly Testing 	 Pedals Testing 	 Rims, Tires &amp; Tube Testing&nbsp;  If you have any further question, please feel free contact us at enquiry@stc.group or visit our website: https://www.stc.group/en/services/detail/sporting-goods

Bike Testing

迈高达科技有限公司

PCB Design Service
Electronic Design Service
Mechanical Design Service

PCB Design Service

As a leading sign and metal production company in Hong Kong, Daiwa's goal is to make the design, ordering and installation process of signs transparent and simple. -Exhibition Showcase are supporting props for commodities and exhibits. They are usually designed to match the size and image of the items for easy viewing and storage.Whether for home decoration or commercial display, they are impeccable； -Good at using metal, combining artistic appreciation and practicality, to create a variety of Exhibition Showcase that meet the needs of customers； -Using professional lighting to create a beautiful and firm Lighting Exhibition Showcase； -No limit to the number of customized Exhibition Showcase； Optional Material：Wood, Acrylic, Stainless Steel, Copper, Aluminum，etc. Application：Shopping mall display cabinets, Store Showcases, Specialty Store Display Cabinets, Jewelry, Cosmetics Showcases, Exhibition Showcases, Image Display Cabinets, etc. Application industry：Tobacco and Wine specialty stores, Cosmetics and Skin Care Products Specialty Stores, Jewelry, Glasses and Watch Stores, Luxury Chain Stores, Daily Necessities Specialty Stores, etc.  Sample Display：Sample 1Sample 1 Front ViewSample 1 DetailSample 2Sample 3Sample 4 

Metal Products，Exhibition Showcase

Electronic manufacturing service, start from PCBA to Final Assembly. Factories located in Thailand, Austria, Slovakia and Hungary. 	 Audio 	 Medical 	 Telecommunication 	 Industrial 	 Transportation 	 etc.,  

Electronic Manufacturing Service - Audio Equipment

锦辉电子有限公司

PCBA -SMT Lines &amp; Through Hole Assembly -SMT: PCB size up to 534 x 610 mm -Able to handle 0201 chips -AOI   Box Build  -IPC-A-610 Class II Workmanship -Class III soldering available upon request -ICT -Burn in 

Production Line

Refined Motor Company Limited

Refined Motor Co. was born out of a pressing need to address the alarming rate of vehicle scrappage across the globe, driven by the rapid rise of electric vehicles. Founded by a group of engineers, the company set out to create a sustainable solution that would not only reduce waste but also promote the adoption of clean energy transportation.The company, witnessing the increasing number of traditional gasoline vehicles being discarded as more consumers opted for electric counterparts, recognized a unique opportunity. We believe that many existing vehicles still had significant potential and could be transformed into electric ones, thereby extending their lifespan and reducing environmental impact.Starting from a modest workshop, the team focused on developing an innovative conversion solution that could be optimize the conversion process. Our goal was to make the conversion process fast, accessible and affordable, allowing car owners to embrace electric mobility without the need to purchase entirely new vehicles.Refined Motor Co. rapidly gained traction by demonstrating the benefits of their conversions, including lower operating costs, reduced emissions, and improved performance. They partnered with leading institutions and automotive experts to promote awareness about the advantages of vehicle electrification.Today, Refined Motor Co. stands as a beacon of innovation in the automotive sector, paving the way for a future where fewer vehicles are scrapped, and more people can enjoy the benefits of electric driving. Our founding mission continues to inspire efforts to create a greener, more sustainable urban environment.  

Scalable Electric Vehicle Conversion

STC is the first non-governmental&nbsp;laboratory in Hong Kong to receive accreditation from&nbsp; Certification and Accreditation Administration of the People&rsquo;s Republic of China &nbsp;(CNCA) to provide comprehensive&nbsp; China&nbsp;Compulsory Certification &nbsp;(CCC) testing services.

Our laboratory in Dongguan, is the first non-government organization in China to obtain designated CCC testing laboratory status providing full scope CCC toy testing services and CCC testing services for information technology equipment, lighting products and audio-visual equipment.
&nbsp; &nbsp; &nbsp; &nbsp;
STC provides one-stop CCC and support services from application and document preparation to type testing and factory inspection to meet all local and oversea CCC needs.&nbsp;

  Information Technology Equipment &nbsp;(GB 4943.1-2011, GB 17625.1-2012, GB/T 9254-2008)  	 Microcomputers 	 Portable computers 	 Computer display devices and projectors 	 Computer Built-in power supplies, adaptors and chargers  If you have any further question, please feel free contact us at&nbsp; enquiry@stc.group &nbsp;or visit our website:&nbsp; https://www.stc.group/en/contact 

CCC China Compulsory Certificate for IT Equipment

香港通用公证行有限公司

Developing the highest quality electrical and electronic (E&amp;E) goods that are safe and energy efficient is a complex challenge in today’s competitive market. Our holistic Total Solution Services for E&amp;E products, delivered through our global network of accredited testing laboratories, ensure manufacturers and retailers have access to expert support at every stage of the product life cycle – from design, production and regulatory compliance to the import and export of goods. Our services include:   We understand regulations and standards for every product and target market, and we can help you reduce risk, improve efficiency and ensure compliance. Our experts can help you to incorporate critical construction criteria and compliance requirements from the design stage to the end of the product life cycle. Our Total Solution Services enhance market access and encourage growth. 

我的采购