This LED spotlight bulb comes with a sophisticated housing with good thermal dissipation. The LED light source lowers energy costs and has a long lifespan. The well-made bulb is an economical choice for the general lighting of various locations.

• Watts: 7W.
• Input voltage: AC90-265V.
• Base: GU10.
• Color temperature: 2,700-7,000K.
• Luminous flux: 450-480lm.
• CRI: +80.
• Beam angle: 38 degrees.
• Non-dimmable carton (pc): 100.
• G.W. carton (kg): 7 cartons.
• Measurement: 27 x 27 x 30cm.
• Heat conductive plastic has a higher rate of thermal conductivity than normal plastic.
• It can work in the field of cooling where only metal can be used.
• Because of the development of thermally conductive plastic and its advantages compared to metal, more and more LED lights with heat conductive plastic housing have been seen in the market.
• The possibility of using heat conductive plastic LED disperse its heat to cooler by heat conduction, then disperse it into surrounding by convection and radiation.
• During this easy model, the function of heat dissipation factor only works from inside cooler to outside cooler.
• During this process of dissipation, when the cooler's heat dissipation factor passes one certain value, there is only little difference between different materials.
• Advantage of heat conductive plastic: comparison item: aluminum heat conductive.
• Plastic working quality product efficiency (lead time).
• Middle short processing temperature 700-750 260-300.
• Mold life: short long.
• Equipment complex easy need second time to process: yes.
• No characteristic heat dissipation.
• Factor: 100W/mk 10W/mk.
• Thermal radiation factor: 0.1-0.2 0.8-0.9.
• Toughness: good good (24kj/m2).
• Stretching factor: good good (58Mpa).
• Insurability: bad (electric conduction) good (high pressure resistant 4,000V).
• Environment protection recycling: good good.
• Environment protection: bad good.
• Low-weight 40% lighter than aluminum.
• Mass-production ability.
• The cycle time are shortened to 12 minutes per part.
• High-diversity injection molds.
• The cost can be cut down with mass production.
• Electricity-insulation.
• The insulation treatment can be moved away.
• HS code: 9405409000.