The DALI controller converts a DALI or Push signal to phase-cut dimming. It can be used where you want a phase-cut dimmable luminaire in a DALI system. This DALI trailing edge phase dimmer can be used with many common, dimmable, line voltage LED lamps, high voltage halogen and incandescent lamps and electronic transformers.  It can realize savings on installation and wiring costs and will also reduce unnecessary waste of electronic equipment, making it an environmentally sound solution for a lighting control upgrade.

With immunity to EN 61547, safety to EN 61347 and providing protection from over temperature, short-circuit and overload (electronically reversible), this is a high quality product that will give you reliable protection and service. Its standby power consumption is <0.50 W.

Features

• DALI DT6/Push dim to the leading edge, trailing edge; and also DALI DT6 to Kinglumi TTW tunable white
• Automatic detection of load type
• Automatic switch to either leading or trailing edge
• Max. load 3- 400W for resistive; 3-300W for leading & trailing; 3-200W for TTW
• Dimming range: 10%-100%
• Take only one DALI address to control several dimming luminaires/lamps
• Built--in with permanent memory
• Suitable for both retrofit and new installations
• Working Ta=0°C ~ +50°C
• Five-year factory guarantee and lifetime technical support
• The phase dimmed output has a DALI Short Address, and can be including in up to 16 DALI Group Addresses and/or up to 16 DALI Scenes.

Benefits

• Less DALI address, easier for DALI commissioning and wiring
• Save you time and money thanks to the easy installation and less products cost
• Energy savings due to standby power<0.50W
• Quick and easy installation
• Min. cut-out hole diameter 66mm for recessed downlights

Connection Interfaces

• DALI, Push-DIM
• Strain relief with through wiring function
• Terminal blocks: pus- fit terminals

Protection Functions

• Over current                               
• Over voltage                                        
• Short circuit                                          
• Over temperature

Application

• Suitable for dimmable high voltage LED lamps, fluorescent lamps, halogen and incandescent lamps
• Suitable for all Kinglumi TTW products with tunable white function
• Commercial Buildings, Hotels, Health Care facilities, Education facilities, Museums, Art Galleries, Homes.