DMX Dim Led Driver 100w 2100mA 100-277vac Plastic case Led Power Supply | 照明配件及零件

泉州斯玛斯电子科技有限公司

查询

比较及批量查询

DMX Dim Led Driver 100w 2100mA 100-277vac Plastic case Led Power Supply

Output:

Constant Current

PFC design:

Built-in active PFC function

Efficiency:

Up to 86.5%

Protections:

Open circuit/short circuit/over temperature/over load

Heat dissipation:

Cooling by free air convection

Waterproof performance:

IP20(EU); for dry and damp locations(US)

Design features:

DMX signal-end isolation,Driver parameters can be adjusted by NFC APP.

Dimming function:

DMX dimming, RDM dimming, flicker free

Application:

Suitable for the application of LED lighting

Others:

High efficiency, small size, high power factor, low THD

描述

联络供应商

Model		SMT-DI100W210-DMXP-T
Certificate		UL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCA
Output	Rated current	210mA-2100mA
	DC Voltage	12V-54V
	Rated power	100Wmax
	Voltage Tolerance	±30mA
	No-load voltage(Max.)	98Vmax
	Line Regulation	<0.1%
	Load Regulation	<0.1%
Input	Voltage Range	100-277VAC
	Frequency Range	47 - 63Hz
	Power Factor @ full load	≤0.95
	THD(Typ.) @ full load	<10%
	Efficiency @ full load	>88.5%@120VAC 60Hz >90.5%@230VAC 50HZ >90.5%@277VAC 60HZ
	No load power (Max)	<3W
	Standby power (max.)	<0.5W
	AC Current (Max.)	<1.33A
	Inrush Current (Typ.)	29.6A, 412us@50%Ipeak120V 56.8A, 120us@50%Ipeak230V
	Inrush Current (Typ.)	68.4A, 580us@50%Ipeak277V
	Leakage current	<0.5mA
Protection	Short Circuit	Hiccup mode, restarts automatically after fault condition is removed
	Over Load	≤120% Hiccup mode or Constant power mode, recovers automatically after fault condition is removed
	Over temperature	Ambient temp. over 55 ± 5℃, output current will be reduced to 50%;
		Ambient temp.Over 45 ± 5℃, recovers automatically after temp. drops.
		Ambient temp.over 75 ± 5℃, output current will be reduced to 0%;
		Ambient temp.Over 45 ± 5℃, recovers automatically after temp. drops.
Environment	Working TEMP	-40~+60℃ (see below derating curve)
	Working Humidity	20 -90%RH non-condensing
	Storage TEM.,Humidity	-40 - +80℃,10 - 95% RH
	TEMP.coefficient	±0.03%/℃(0 - 50℃)
	Vibration	10~500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y,Z axes
Safety & EMC	Safety standards	EN61347-1 EN61347-2-13 (EU) & UL8750 (US)
	Withstand voltage	I/P-O/P:3.75KVAC (EU) & I/P-O/P:1.8KVAC (US)
	Isolation resistance	I/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH
	EMC Emission	EN55015 EN61000-3-2,3 (EU) & FCC Part 15, Subpart B;ANSI C63.4:2014 (US)
	EMC Immunity	EN61000-4-2,3,4,5,6,11 EN61547 (EU)
	Lightning surge	DM:2KV CM:4KV
	Strobe test standard	IEEE 1789 flicker-free
Others	Net Weight	0.43KG
	Net Weight	0.43KG
	Dimension	375.834.824.1mm (LWH)
	Packing	3224.5355 50pcs /CTN
Notes	1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.
	2. To extend the driver's using life, please reduce the loading at lower input voltage .
	3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10.
	4. Dimming electrical circuit:
	Notice: This control circuit is isolated,but didn't evaluate Class 2.
	Please refer to the installation manual to connect the dimmer.
	CAUTlON: More than one power supply present.
	ATTENTION: presence de plusieurs alimentations électriques.