NeuroTrac® Obstetric TENS is the perfect solution for obstetrics and labor pain relief practices. With preset program and two completely different channels, this device is definitely a user-friendly choice for a convenient operation. Compact, light and reliable, this gadget serves as a portable helper for patients.
- Two-channel: individually isolated circuits.
- Amplitude: 0-80 mA into 500 Ohm load; indication only.
- Actual mA will tend to be less than indicated due to electrode impedance.
- 1000 Ohms load (Electrodes in poor condition) limited to 70 mA (max.).
- 1500 Ohms load limited to 65 mA at the maximum.
- Type: constant current, max. output voltage 180 Volts +10 / -30 Volts.
- Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
- Pulse width: 220μS [2% accuracy].
- Pulse rate: 90Hz (continuous mode) [2% accuracy].
- Mode: continuous (Boost mode).
- Burst mode: bursts of 9 pulses [200 μS] at 150 Hz, repeating twice every second (rest mode).
- Ramp up time: 0.8 seconds from rest to boost.
- Time duration: continuous until it is switched off.
- Comes with low battery indicator.
- Battery symbol flashes on/off once every second (battery goes below 6.9 volts +/- 0.2 volts).
- Turns off as the voltage goes below 6.6 (+/- 0.2) volts.
- Open electrode detection: reset to zero (output channel A or B).
- Working conditions: +10 to +30 degrees centigrade, 0-90% humidity.
- Storage and transport: -10 to +50 degrees centigrade, 0-90% humidity.
- Physical dimensions: 108 x 62 x 23 mm.
- Weight: 0.09 kg without battery, 0.14KG with battery.