我的采购

请输入包含最少两个字元或数字的关键字。

Shenzhen JDB Technology Co., Ltd.
查询

免责声明

本网页的连接可将阁下连往其他网址而阁下承认并同意,香港贸发局及其各联号公司对连接网址所提供的任何资讯的准确性或有效性,不负任何责任。

连接其他网址并不构成香港贸发局对该等网址或者该等网址所提供的资讯丶产品丶广告或其他材料的认可。

分享此页面
PCB Prototype Double Layer PCB Fabrication
分享此页面
品牌名称:
PCBGOGO
颜色:
GREEN
港口:
Shenzhen
付款方式:
T/T, PayPal
最低订购数量:
5 piece(s)
是否有包装:
是否可定制:
板厚:
0.4mm-2.4mm
最小线距:
0.1mm
最小线宽:
0.1mm
基板材质:
fr-4
铜厚:
1~3oz
最小孔径:
0.1mm
表面处理:
HASL WITH LEAD /HASL Lead free/enig
镀通孔种类:
镀通孔印制电路板
描述
联络供应商
描述
  •  PCBGOGO PCB Board Fabrication Capabilities
  • Items Fabrication Capabilities Remarks Picture
  • Layer Count 1-10 layers 1-10 Layers PCB fabrication will be provided online order by PCBGOGO. If your PCB order is over 10layers, please contact your customer service for quotation.  
  • Material FR-4 94V0/ Aluminum For FPC, HDI, ROGERS, HAlOGEN-FREE, HIGH TG ETC., contact your customer service.  
  • Maximum
  • PCB Size 500x1100mm The max. size of PCBGOGO PCB is 50*40cm. and we accept longer PCB board which max. length is 1100MM  
  • Minimum
  • PCB Size 3mm*3mm    
  • Maximum
  • Panel Size 50cm*45cm    
  • Minimum
  • Panel Size 7.5*7.5CM If you need v-cut, this is minimum panel size in PCBGOGO  
  • Tolerance
  • size of
  • board
  • (outline) ±0.2mm CNC tolerance is ±0.2mm, v-cut tolerance is ±0.5mm  
  • Board
  • Thickness 0.4-2.4mm The thickness we could fabricate is 0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4  
  • Tolerance
  • thickness of
  • board
  • ( t≥1.0mm) ±10% Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.  
  • Tolerance
  • thickness of
  • board
  • ( t≥1.0mm) ±0.1mm Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.  
  • Min. Line
  • Width 4mil(0.1mm) Min. Line Width is 0.1mm;In terms of multi-layer PCBs, Min. Line Width for inner-layer is 0.175mm, and  
  •     0.1mm/4mil for outer layer. if the minimum line width is less than 6mil , there will be an extra charge / fee.
  • Min. Line
  • Space 4mil(0.1mm) Min. Line Spacing is 0.15mm/6mil. If Min. Line Spacing is less than 6mil, it will charge extra fee.  
  • Outer Layer
  • Copper
  • Thickness 35um/70um/105um (1OZ/2OZ/3OZ) It means the thickness of copper in outer layer. 1 OZ=35um, 2OZ=70um, 3OZ=105um.  
  • Inner Layer
  • Copper
  • Thickness 35um/50um(1OZ/1.5OZ) Default is 1OZ, but if you have special requirement, 1.5 OZ is acceptable./td>  
  • Drill
  • Diameter
  • Range 0.2-6.3mm Min. Size of drill via CNC is 0.2mm. 6.3mm is maximum size.  
  • Annular
  • Ring ≥0.1mm(4mil) If Annular Ring is smaller but there is enough space, there is no limit for the Annular Ring size. But if there is not enough space coupled with dense lines, the Annular Ring size should be over 0.1mm.  
  • Finished
  • Hole Size 0.2--6.20mm Because the copper will cover the surface of hole, the Finished hole size is smaller than it is in Gerber file.
  •  
  •  

Shenzhen JDB Technology Co., Ltd.

Shenzhen JDB Technology Co., Ltd.

中国内地

您或许喜欢

确定要取消关注此供应商?