我的采购

产品

服务

供应商

请输入包含最少两个字元或数字的关键字。

Phase Detector
Phase Detector
广州市铱泰电子科技有限公司

广州市铱泰电子科技有限公司

中国内地广东省

制造商

平均回覆时间

不适用

供应商资料最后更新: 2019年7月14日

2010年8月1日登录于贸发网

产品属性
产品型号:
ETCR1000A
品牌名称:
ETCR
颜色:
Red
尺寸:
70 x 75 x 30mm
港口:
Guangzhou
付款方式:
T/T
描述

Presented is a phase detector which is manufactured for positive and negative phase detection. The phase detector is designed to perform phase sequence checks and live line checks of a 3-phase circuit using a static induction voltage clip. The main console features a LED display for showing test status.

  • Function: phase detection positive/negative.
  • Display: LED.
  • Weight (g): 270.
  • Continuously using 200 hours.
  • The static induction voltage clips are used to be able to clip on a clayed wire.
  • Meets IEC-10101 (EN61010), CAT Ⅲ (600V) safety requirement.
  • Red LED lamps are used to make the indication visible in dimly lit areas.
  • The direction of phase sequence can be checked easily using the LED lamps, which blink in order.
  • Technical functions: phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and line maintenance.
  • Power supply: DC 3V AA Mn batteries (R6P) x 2pcs, continuously working for 200 hours.
  • Live voltage range: AC0~600V, 40~70Hz (Sine Wave Continuous Input)
  • Clamp wire size: diameter ø18mm, insulated wire available (equivalent to wire cross-sectional area 120mm²).
  • LED display.
  • Positive phase: four lights of phase detection rotate in clockwise direction, with intermittent short beeps.
  • Reverse phase: four lights of phase detection rotate in counterclockwise direction, continuous beep.
  • Live power: R-S and S-T lights on within voltage setting range.
  • Phase deficiency: R-S, S-T lights do not flash.
  • Open circuit: R-S, S-T lights do not flash.
  • Boot indication: boot indication light turns on after booting.
  • Auto power off after 3 minutes, the meter automatically cut off power supply.
  • Clamp lead length: 0.5m.
  • Meter weight: 180g (with battery).
  • Working temperature and humidity: -10℃~55℃; below 80% RH.
  • Storage temperature and humidity: -20℃~60℃; below 90% RH.
  • Maximum measured voltage: AC 600V.
  • Dielectric strength: 5.4kVrms.
  • Maximum rated power: 100mVA.
  • Safety provisions: EN61010-1: 2001, EN61010-031: 2002, pollution level 2, CAT III (600V), transient over-voltage 6000V.
  • Meter: 1 piece.
  • Carrying case; 1 piece.

您或许喜欢