This steriliser disinfects using UV-C light, photocatalysis and plasma ions and features an intelligent CPU auto-sensing mode and night light time control.

This product is designed for use in sanitary conditions only. It is powered by the incorporated mains plug.

It kills 99.9% of bacteria and viruses through three levels of sterilisation (UV light, photocatalysis and plasma Ions).

The product is maintenance-free and the filter does not need to be cleaned or changed.

There is no secondary pollution emitted from this product.

Operation

Disinfection, sterilisation, air purification and night light

1. Directly plug in the unit to a wall socket to power on the product.

2. Use the ON/OFF switch to alternate between sensor mode, always-on mode and shutdown mode.

3.By default, the unit switches to sensor mode (indicated by the blue light) when powered on. This mode is controlled by the PIR infrared body sensor; human body movement within the detection range will activate the purifier. The purifier (fan, plasma purifier and UV light) will operate for 1 hour once activated. If the sensor detects dim ambient light, the night light will turn on for 5 minutes when human body movement is detected.

4. Press the ON/OFF button again to toggle to always-on mode (indicated by the green light). In this mode, the air purifier will operate continuously. If the sensor detects dim ambient light, the night light will turn on for 5 minutes when human body movement is detected.

5. Press the ON/OFF button again to toggle to shutdown mode. In this mode, press the ON/OFF button again to toggle between the other modes.

6. The night light intensity can be adjusted between 4 levels (Off/Low/Medium/High); the default setting is Medium. To adjust the intensity, hold down the ON/OFF button for 2 seconds. To set the intensity, press the ON/OFF button to toggle between levels. The intensity level will be stored for future use. In the event of a power failure, all functions and settings will be reset.