- Suit for LED high bay with 0-10V dimming function.

- Manual test and remote control test.

- Built-in high power AC relay to control normal led driver operation.

- Used with Lithium iron phosphate battery.

- 3hours duration

- IP65 Waterproof and independent battery pack that can be easily replaced by hand. Battery pack with built-in charging and discharging protection board. - Both AC input as well as output and dimmer input as well as output use waterproof PG connector.

- Ambient range  ta 0....45℃

- Standard lifting ring and safety rope.

- Self-test function. Comply with IEC62034 self-test standard.

- Press and hold the test switch or the test key of the remote control in the emergency mode to enter into rest mode. In rest mode, the battery is completely disconnected from the inverter,  and the small leakage current can make its storage time longer.

- Red and green led indicator.

- The first power-on use will enter into the function self-test to help users quickly determine the compatibility with lamps. 

- Failure hold mode.

  In the faulty mode, press test button over 15 seconds while connecting mains  power after clearing faulty situation, faulty mode can be canceled, meanwhile  it enters into initial mode.