Silicone rubber for tire mold making description:
Silicone rubber for tire mold making is white or red flowing liquidwith general hardness of 22-50A.
Silicone rubber for tire mold making operation:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around3 minutes . (If there is no vacuum machine,pls pour the mixture carefully and slowly down the side of the moldframe so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergentor soap water)on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Silicone rubber for tire mold making shelf life:
8-10 months when stored under 24°C in original unopened packages.
Silicone rubber for tire mold making package:
20kg/drum,25kg/drum and 200kg/drum
Silicone rubber for tire mold making certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8