LEDGEAR® C9, the most compact design DALI-2 looping LED driver in the world, which covering all the wattage within 22W(500mA) for indoor lighting, especially suitable for cut out hole no less than 66mm, and bigger but with small ceiling void.

The driver equipped with push-fit terminals, which enable through wiring of Primary, DALI and Push wires throughout the driver, and save lots of time and effort on a site’s actual wiring work. The terminals allow quick cable connections without any tool, and also support a variety of wire gauge and cable thicknesses. Assembled with 4xDIP switches, the driver allows output current selectable, or programmed any output current by DALI. Variable output voltage of 14-40V with constant current output. These wide operating windows and easy wiring for LED modules makes it super flexibility and warehouse inventory reduction.

     Product description

• Design DALI-2 & Push-DIM 2in1 dimming
• Min. cut-out hole diameter 66mm for recessed downlights
• Reliable, Class II, SELV according EN 61347
• ENEC, CE, CB approved by TUV SUD, SAA, Ctick qualified
• Eco Design Directive (EU) 2019/2020 compliant
• Tool-less installation and with through wiring
• ENHANCED amplitude dimming technology
• ±5% output current accuracy(under maximum load)
• Protection for output open load, short circuits, over voltage and over temperature
• Built--in with permanent memory for DALI and Push-DIM, 100,000 times memory
• 80°C Maximum case operation temperature(tc-point ¹)
• Operating temperature ¹: -25°C ~ +55°C, the humidity: 20% ~ 85%
• Over 55,000 hrs nominal lifespan at tc=65°C
• Five-year factory guarantee and lifetime technical support ¹
• “¹” Detailed data please refer to the " PARAMETERS" table .

Features & Benefits

      Flexibility & Optimized Inventory

• Both model covers wattages from 4.8W to 19W and differs in lifespan
• Wattage selectable by 3xDIP switches.
• Push-fit secondary terminals for LED module wires

     Human Centric Design

• Easy & Quick connection with push-fit terminals and clip-on end cap for strain relief, super large wiring space
• Loop in & loop out function, max.2.5mm² cross section L, L, N, N, DA, DA,DA,DA stranded wire or solid wire
• Loose wiring inspection don't need to open the transparent end cap

Connection Interfaces

• DALI DT6, Push-DIM
• Strain relief with through wiring function
• Terminal blocks: push- fit terminals

Housing Properties

• Casing: polycarbonate, white
• Type of protection IP20

Typical applications

• For downlight and spot light in both residential, commercial and decorative lighting applications