电子产品

搜罗全球顶尖电子产品公司提供的电子产品资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

电子产品供应商和制造商

Electronics

零件，组件和原材料

搜罗全球顶尖零件，组件和原材料公司提供的零件，组件和原材料资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

零件，组件和原材料供应商和制造商

Parts, Components & Raw Materials

主动组件

elec

搜罗全球顶尖主动组件公司提供的主动组件资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

主动组件供应商和制造商

Active Components

雷松科技股份有限公司

 This is a Bluetooth class 2 (max. 4dBm) module. It is based on the CSR 8640 ROM version chip set which supports Bluetooth V3.0 standard. The embedded kalimba DSP co-processor supports advanced features such as echo cancellation, noise reduction, and stereo audio (A2DP profile) communications. Advanced user interface design allows multi-point HFP or A2DP connections and secures simple pairing. The integrated stereo DAC provide high quality audio performance with SNR up to 95dB. It can support digital audio bus such as PCM, I2S or SPDIF and the on chip switched-mode regulator and Li-ion battery charger eliminate the needs of external components and costs. It is the true single chip solution to audio applications. Internal ROM, serial flash and EEPROM enable the flexibilities of the module to meet various kinds of applications.

Product specification:    BC08 stereo ROM module (CSR 8640) with APTX.   Max.4dBm (Class2) module.   Bluetooth standard: Bluetooth 3.0.   RF power: 4dBm maximum.   Receiving sensitivity: -85dBm.   Program memory: ROM version.   Physical interfaces: digital PIOs, analogue IOs.   Supply voltage: 2.7V &ndash; 4.25V.   Integrated switched-mode regulator.   Integrated battery charger.   Embedded Kalimba DSP co-processor.   Integrated 16-bit stereo audio codec 93dB SNR for DAC.   CSR&rsquo;s latest CVC technology for narrowband and wideband voice connections including wind noise reduction.   Wideband speech supported by HFP v1.6.   Profile and mSBC codec.   Multipoint HFP connection to 2 phones for voice.   Multipoint A2DP connection enables a headset (A2DP) connection to 2 A2DP source device for music playback.   SBC, MP3, AAC, Fast stream support.   HSP v1.2/ HFP v1.6/ A2DP v1.2/ AVRCP v1.4.   Voice prompts (SPI flash).   RoHS compliant.   Dimension 13.4 x 13.4 x 2.7mm (8M SPI Flash for voice prompts); 13.4 x 13.4 x 1.9mm (EEPROM).   
Applications:    High quality wireless stereo headset.   High quality wireless stereo speaker.   Hands-free car kits.   VoIP or land line phones wireless headsets.   
Product benefits:    Cost effective ROM version.   Simple design and easy to use.   Flexible configurations for various kinds of applications.  

Stereo Rom Module

SimpLive Technology Co., Ltd.

From hardware technology, system platform &amp; application to Product line development,
SimpLive provide turkey solutions to meet all your requirements. By divided&nbsp;the whole System to Core Module and IO Board; it could simplify customer design process and expand product lines in the shortest time.

Simplive's Core Module include: CPU, Flash/Security SiP, DRAM, and Audio Codec. By standard core module design, it's could realize customize a new system in one month if core module is the same.

Simplive has smart TV stick, smart TV bar solution available and could ODM customer's project. 


Core Module

深圳市源创通信技术有限公司

 Introduction:  	 Banana PI BPI-M2&nbsp;Ultra&nbsp;is the open source hardware platform,&nbsp;Banana PI BPI-M2&nbsp;Ultra&nbsp;is an quad core version of Banana Pi,it support WIFI on board. use R40 chip on board. and size&nbsp;only 92mm*60mm 	 Banana PI BPI-M2&nbsp;Ultra&nbsp;series run Android,Debian linux,Ubuntu linux, Raspberry Pi image and others image. 	 Banana PI BPI-M2&nbsp;Ultra&nbsp;&nbsp;hardware: 2GB DDR3 SDRAM, 8G eMMC flash on board,and SDIO wifi&amp;BT4.0 module on board. 	 Banana PI BPI-M2&nbsp;Ultra&nbsp;&nbsp;with Gigabit ethernet port, It can run with Android 6.0&nbsp;smoothly. it can easily run with the game it support 1080P high definition video output and 4K support, the GPIO compatible with Raspberry Pi B+ and can support raspbian Image 	 CPU quad-core cortex -A7 R40 	 GPU MALI-400 MP2 @ 500MHz 	 Memory 2GB DDR3 SDRAM (shared with GPU) 	 Storage Support MicroSD Card(up to 64GB)/eMMC(8GB onboard) 	 SATA 	 Onboard Network 10/100/1000Mbps ethernet (Realtek RTL8211E/D) 	 WiFi 802.11 b/g/n (AP6212) 	 Bluetooth BT4.0 (AP6212) 	 Video In CSI connector that supports 8-bit YUV422 CMOS sensor CSI, CCIR656 protocol for NTSC and PAL, 5MP camera, 1080p video @30Hz 	 Video Out HDMI 1.4 1080P60 	 MIPI DSI for RAW LCD panels 	 Audio Out 3.5 mm Jack and HDMI 	 Audio In On board microphone 	 Power Source 5V 2A DC port 	 USB Ports 3x USB 2.0, USB OTG(Micro USB) 	 Buttons Reset button, Power button, U-boot button 	 GPIO 40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground 	 LED Power status Led and RJ45 Led 	 IR Onboard IR receiver 	 OS Android and Linux etc.OS 	 Dimensions 92mm x 60mm 	 Weight 45g 	  Payment Term  	 T/T 	 Western Union 	 Paypal 	  Ensuring Quality  	 We have our own QC department, so we will check the quality before shipment. 	 If any problems on our products, we will offer free repairment, one-year warranty.  

Banana Pi M2 ultra Quad core R40 better than Raspberry Pi

Apal Technology Co Ltd

  This is a single chip recording IC in a rectangular shape. It can record speech and voice of up to 15-20 seconds. The recording IC provides high quality audio output with high volume and low power consumption.  
 
   Recording time: 15-20s.  
  Speech mix. 
 

Single Chip Recording IC

Raytac Corp

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

&nbsp;

Nordic nRF52832 BLE Module

Raytac&rsquo;s MDBT42Q-P512K is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.
About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 16 x (W) 10 x (H) 2.2 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  
&nbsp;

Raytac&rsquo;s MDBT42V and MDBT42V-P is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module:
1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference.
2. Compact size with (L) 8.6 x (W) 6.4 x (H) 1.5 mm.
3. Low power requirements, ultra-low peak, average and idle mode power consumption.
4. Be compatible with a large installed base of mobile phones, tablets and computers.
5. Fully coverage of BLE software stack
6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware.
7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified
8. FCC/IC/CE/Telec/SRRC safety regulation certification granted.

Features 	 Multi-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 20 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT lus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  
&nbsp;

Raytac&rsquo;s MDBT42Q-512K is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 16 x (W) 10 x (H) 2.2 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.FeaturesMulti-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

Nordic nRF5832 BLE Module

Raytac&rsquo;s MDBT42 is a BT5 and BT4.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52832 SoC solution, which incorporates: GPIO, SPI, UART, I2C, I2S, PWM and ADC interfaces for connecting peripherals and sensors.

About the module: 	 1. Dual Transmission mode of BLE &amp; 2.4Ghz RF upon customer preference. 	 2. Compact size with (L) 13.8 x (W) 8.8 x (H) 1.9 mm. 	 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 	 4. Be compatible with a large installed base of mobile phones, tablets and computers. 	 5. Fully coverage of BLE software stack 	 6. BLE &amp; RF transmission switching helps products fit all operation system and most hardware. 	 7. BT5 &amp; BT4.2 Bluetooth Specificaiton Certified 	 8. FCC/IC/CE/Telec/KC/SRRC safety regulation certification granted.  Features 	 Multi-protocol 2.4GHz radio 	 32-bit ARM Cortex &ndash; M4F processor 	 512KB flash programmed memory and 64KB RAM 	 Software stacks available as downloads 	 Application development independent from protocol stack 	 On-air compatible with nRF51, nRF24AP and nRF24L series 	 Programmable output power from +4dBm to -20dBm 	 RSSI 	 RAM mapped FIFOs using EasyDMA 	 Dynamic on-air payload length up to 256 bytes 	 Flexible and configurable 32 pin GPIO 	 Programmable peripheral interface - PPI 	 Simple ON / OFF global power mode 	 Full set of digital interface all with Easy DMA including: 	 3 x Hardware SPI master ; 3 x Hardware SPI slave 	 2 x two-wire master ; 2 x two-wire slave 	 1 x UART (CTS / RTS) 	 PDM for digital microphone 	 I2S for audio 	 Quadrature demodulator 	 12-bit / 200KSPS ADC 	 128-bit AES ECB / CCM / AAR co-processor 	 Lowe cost external crystal 32MHz &plusmn; 40ppm for Bluetooth ; &plusmn; 50ppm for ANT Plus 	 Lowe power 32MHz crystal and RC oscillators 	 Wide supply voltage range 1.7V to 3.6V 	 On-chip DC/DC buck converter 	 Individual power management for all peripherals 	 Timer counter 	 5 x 32-bit 	 3 x 24-bit RTC 	 NFC-A tag interface for OOB pairing  

MacroSilicon Technology Co., Ltd.

 	 MS2100 is a video and audio processor chip 	 Can convert AV and S-video signals to USB signal 	 Also can covert audio signal to USB signal and USB video and audio signals follow USB UVC and UAC protocol 	 Can play or recode video and audio signals through USB interface 	 As built-in MCU, using the ROM code and without driver installation, MS2100 is very simple to use  
 Applications:  	 Security and protection monitoring 	 Video and audio record 	 Medical 	 Industrial camera  

MS2100 Chips

Uchi Optoelectronic (M) Sdn. Bhd.

 As shown is an electric module with a sophisticated layout. This piece can operate stably with reduced power consumption. The module can be widely applied to household appliances, medical equipment, telecommunication equipment, testing equipment, industrial instruments, etc. 
 
  Certification: EC-1275/2008. 
  Easy to install and maintain. 
 

Electric Module

BeStar Electronics Industry Co., Ltd.

The ultrasonic sensor sends ultrasonic waves to the air. It then detects the ultrasonic echoes from impediments. This piece is also completed with a multipurpose design.
 
  Guard against theft &amp; alarm system, range finders, automatic doors, back sonar of cars, parking meters, water level, etc. 
  Easy to install and maintain. 
 

Ultrasonic Sensor

TRULY SEMICONDUCTORS LTD

The compact camera module is finished with a sophisticated construction. It can be applied widely in mobile phones, cars, consumer electronics, computers, etc.&nbsp; 	 Other applications: industrial, medical, computer industry, etc. 	 Various sensor solutions are available. 	 Experience tunning team.  

Compact Camera Module

 	 MS7024 is a TV encoder device targeting handheld, portable video applications such as digital still cameras and similar portable embedded systems 	 Device is able to encode the video signals and generate synchronization signals for NTSC and PAL standards 	 Supporting NTSC-M, NTSC-J, NTSC-433, PAL-B/D/G/H/I, PAL-M, PAL-N and PAL-60 formats for TV output 	 Device can via 24/16/8bit digital input selector that supports different input data formats, including RGB and YUV  
 Applications:  	 Video converter/set-top-box 	 Car infotainment device 	 Portable/desktop visualizer 	 Video matrix  

MS7024 Chips

Tekall Enterprise (Hong Kong) Co.

   Frequency: 315/433MHz, ASK.   Power supply: 2.1 to 5V, 4mA.   Receiver sensitivity: -112dBm.   High receiver sensitivity.  

我的采购