家居用品，灯饰及建筑

搜罗全球顶尖家居用品，灯饰及建筑公司提供的家居用品，灯饰及建筑资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

家居用品，灯饰及建筑供应商和制造商

Home Products, Lights & Constructions

灯饰

搜罗全球顶尖灯饰公司提供的灯饰资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

灯饰供应商和制造商

Lights

照明配件及零件

home

搜罗全球顶尖照明配件及零件公司提供的照明配件及零件资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

照明配件及零件供应商和制造商

Lighting Accessories & Parts

联益电器制品厂有限公司

- 220-240V - 2.5A - 1.5m in length. 0.2m, 0.3m and 1m available - With power plug (BS, VDE &amp; CCC) - Designed for use with Kengo linkable products  #electrical parts, #lighting accessorires&amp;parts, #wire, #linkable, #connection system, #kengo, #BS, #VDE, #GS   

KSP Linkable Wire With Plug

Voltage: 250VCurrent: 2AMale and Female connectorCabel: 2 x 0.75mm2KSP Link wire available from 0.2m to 1.5m lengthConstruction: PA and PolycarbonateColour: White and BlackDesigned for use with Kengo Linkable fittingsDimension: 590mm (L) x 20mm (W) x 10mm (H)  Featues: KSP link system with male and female connectorCompact design for mains voltage wiring connectionConstructed from high quality materialSuitable for install at various applicationsTotal lighitng solutions for furniture industry, cabinets and wardrobes   #electrical parts, #lighting accessorires&amp;parts, #wire, #linkable, #connection system, #kengo, #BS 

KLS Linkable Wire

Voltage: 250VCurrent : 2.5AInput with ultraslim male plug (inlet)Output with ultraslim female socket (Outlet)Cable : 0.5meter, 2 x 0.75mm2Available 0.3M / 1.0M length and bare endsConstruction: High Impact PAColour: WhiteDimensions: Male plug – 9.6mm dia. and Female socket – 8mm dia.  Features: Ultra slim female socket with 8mm diameter onlyCompact design for mains voltage wiring connectionConstructed from high quality materialSuitable for install at various applicationsTotal lighitng solutions for furniture industry, cabinets and wardrobes   #electricalparts, #electrical, #lightingaccessories&amp;parts, #wiringaccessories, #kengo, #BS, #connection, #linkable 

Ultra Slim Connection System - Linkable Cable

- 250V~ 10A- Comply to EN60998-1, EN60998-2-1 standard- Zinc-plated steel cage Terminal- Ambient Temperature: T85-110oC- Colour in white and black  Features :  - A total solution for link up power connection- Constructed from quality material and meets BS Saftey Standards- Ideal for commercial, domestic and furniture lighitng solutions  #electricalparts, #electrical, #lightingaccessories&amp;parts, #wiringaccessories, #kengo, #connectionbox, #BS, #10A  

3 Way Connection Box 10A

Designs for 12V Lighting systemBlue coloured indicate as 12V versionAll models available as mains voltage connection system*24V green coloured version available  Features: Designed for connect with 6 light fittingsCompact design for mains voltage wiring connectionConstructed from high quality materialSuitable for install with 6 lightsTotal lighitng solutions for furniture industry, cabinets and wardrobes  #electricalparts, #electrical, #lighting accessoreis&amp;parts, #kengo, #BS, #connection, #low voltage, #12V 

Ultra Slim Connection System - Low Voltage Connection System

12 Way terminal blocks 450V~ 24A Wiring capacity Max. 4.0mm? Comply to EN60998-1, EN60998-2-1 standard Zinc-plated steel cage Terminal Ambient Temperature: T85-110?C Colour in white or black  Features: A total solution for link up power connectionConstructed from quality material and meets BS Saftey StandardsIdeal for commercial, domestic and furniture lighitng solutions  #electrical, #electricalparts, #terminalblock, #12way, #kengo, #wiring, #connection, #lighting accessories&amp;parts 

12 Way 450V Terminal Blocks - Steel Cage

Voltage: 250V Current : 2.5A Input with ultraslim male plug (Inlet) Output with 6 Way ultraslim female socket (Outlet) Cable: 0.5m, 2 x 0.75mm2 Available with BS / SAA / CCC plug and bare ends Construction: High Impact PA Colour : White Dimensions: 91mm (L) x 26mm (W) x 13mm (H)  Features: Designed for connect with 6 light fittingsCompact design for mains voltage wiring connectionConstructed from high quality materialSuitable for install with 6 lightsTotal lighitng solutions for furniture industry, cabinets and wardrobes   #electricalparts, #electrical, #lightingaccessories&amp;parts, #wiringaccessories, #kengo, #BS, #connection, #SAA, #CCC 

Ultra Slim Connection System - Six Way Connection Socket

Voltage: 250VCurrent : 2.5AInput with mains plug or bare ends (Inlet)Output with 6 Way ultraslim female socket 1 switching socket (Outlet)Cable: 1.5m, 2 x 0.75mm2Available with BS / SAA / CCC plug and bare endsConstruction: High Impact PAColour: WhiteDimensions: 102mm (L) x 26mm (W) x 13mm (H)  Features: Designed for connect with on/off switch to control max. 6 light fittingsCompact design for mains voltage wiring connectionConstructed from high quality materialSuitable for install at various applicationsTotal lighitng solutions for furniture industry, cabinets and wardrobes   #electricalparts, #electrical, #lightingaccessories&amp;parts, #wiringaccessories, #kengo, #BS, #connection, #SAA, #CCC 

Ultra Slim Connection System - Connection Socket W/Built-in Switching System)

Voltage: 250VCurrent : 2.5AInput with mains plug or bare endsOutput with ultraslim female socket (Outlet)Cable: 1.5m, 2 x 0.75mm2Available with BS / SAA / CCC plugConstruction: High Impact PAColour : WhiteDimensions: Female socket – 8mm dia. X 32mm (L)  Features: Ultra slim female socket with 8mm diameter onlyCompact design for mains voltage wiring connectionConstructed from high quality materialSuitable for install at various applicationsTotal lighitng solutions for furniture industry, cabinets and wardrobes  #electricalparts, #electrical, #lightingaccessoriesparts, #cable #wiringaccessories,#kengo, #BS, #SAA, #CCC, #connection, 

Ultra Slim Connection System - Supply Cable

Cord Grip with Short Skirt Model 490 Short Skirt only  Features: Durable, practical and exceptional valueClear terminals for easy wiring and installationManufactured from quality matrial and componentsCeiling roses and pull cord switches available with standard urea white and metal finishesMeets BS Safety Standards    #LED, #lampholder, #lightingaccessories&amp;parts, #ceiling, #white, #B22,#electricalparts, #ledbulb, #Kengo, #BS   

B22 Lamp Holder (T2)

宁波凯峰电器有限公司

Featured here is an IP44 socket for charging electrical devices. It comes in a compact size and has a lid for covering the electrical parts. This IP44 socket flaunts a long working life and delivers quick and efficient charging performance. 	 IP44 socket for charging electrical devices. 	 Compact size. 	 Texture exterior to ensure a firm grip. 	 With a lid for covering the electrical parts. 	 Long working life. 	 Quick and efficient charging performance.  

Socket KF-GBYCP-01

LISUN ELECTRONICS (SHANGHAI) CO., LTD

Impulse Voltage Generators | Impulse Generators | Impulse Withstand Voltage Tester |High VoltageSurge Generator is according to IEC255-5,GB-14711 , GB/T-14598.3, IS-13252-1, IEC60060,IEC60065,GBT17215.301 andGBT17215.322. The insulation performance test is suitable for all kinds of electrical and electronic products (such as energy meter, household appliances, low voltage electrical appliances and small power motors). Standard:IEC255-5 “Relays – Insulation tests”IS-13252-1 “Information technology equipment — Safety Part 1 General requirements”IEC60060 “IEC 60060-1-2010 High-voltage test techniques – Part 1 General definitions and test requirements”IEC60065 ” Audio, video and similar electronic apparatus – Safety-requirements”IEC 60255-5:2000/GB/T-14598.3″Electrical relays – Part 25: Electromagnetic emission tests for measuring relays and protection equipment”GB/T-3048.8 “Test methods for determining electrical properties of electric cables and wires.A.C. voltage tests” LISUN ModelSUG255LXSUG255MXSUG255PXSUG255PX-20KVSUG255PX-25KVSUG255PX-30KVRange of Output Voltage0～12kV0～20kV0～25kV0～30kVImpedance of Generator12Ω and 500Ω38Ω and 500Ω2Ω and 500ΩVoltage Output Waveform1.2 / 50μsPolarity of Output VoltagePositive and NegativeOperation ModeManually and AutomaticTest Repetition1～9999Interval Time3～9999s

Impulse Voltage Generators | Impulse Generators IEC255-5, IEC60065

DOMF61000-10 damped oscillatory magnetic field immunity test system includes damped oscillating wave generator and single ring coil. It’s designed for damping oscillation magnetic field immunity test. Standard:IEC 61000-4-10, EN61000-4-10/GB/T 17626.10 “Electromagnetic compatibility (EMC) – Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test; Amendment 1”IEC 255-22-1 “amortie 1 MHz Electrical relays – Part 22-1: Electrical disturbance tests for measuring relays and protection equipment – 1 MHz burst immunity tests”IEC 255-22-3 “Measuring relays and protection equipment – Part 22-3: Electrical disturbance tests – Radiated electromagnetic field immunity “ANSI C37.90 “Relays and Relay Systems Associated with Electric Power Apparatus “GB/T 14598.13 “Electrical disturbance tests for measuring relays and protection equipment Part 1: 1 MHz burst disturbance “ Specification: Magnetic Field Strength0~100A/mOscillation Frequency100kHz, 1MHzPulse PolarityPositive, Negative or Positive/Negative automaticRise Time75ns±20%AttenuationAttenuation to half value of first peak within fifth peak to tenth peakRepeat Frequency1~80Hz(oscillation frequency: 100kHz)-Adjustable; 1~500Hz(oscillation frequency: 1MHz)-AdjustableBurst Width1～9999s(Adjustable)Pulse Interval1～9999s(Adjustable)Test FunctionBuilt-in IEC standard test levels; Step voltage; Big LCD touch screen

Damped Oscillatory Magnetic Field Immunity Tester

Dongguan Deson Insulated Materials CO.,LTD

Description: FR4 Epoxy Fiberglass Laminate Sheet is made of electrical-purposed, alkali-free glass cloth impregnated with epoxy resin by hot pressing. It has good mechanical and dielectrical properties. Applicable to mechanical, electrical, electronic, electrical, and other fields. It is also used in the processing of insulating parts and processed into all kinds of insulating parts and equipment insulating structural parts, which can be used in wet environment conditions and transformer oil.  FR stands for flame retardant and denotes that the safety of flammability of FR4 is in compliance with the standard UL94V-0. The FR4 epoxy laminate has a smooth surface, no air bubbles, and no pits or wrinkles, but it allows for other defects that do not affect its use, such as scratches, indentations, stains, and small spots. The edges should be cut neatly, and the end faces must be free of delamination and cracks.  Features: 1. High mechanical performance under medium temperature. 2. Good electrical performance stability under high temperature. 3. Resist to acid and alkali. 4. Corrosion resistance.  Applications: Widely used plastics in the electronics field, primarily because water absorption is virtually nil, rendering it an outstanding insulator. 

Epoxy board

The LS9955/LS9956Automatic Safety Test System (electrical safety analyzer) combines the following functions: Withstand Voltage Test (AC / DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test (LS9956 includes Power Test, LS9955 does not include Power Test). The equipment is mainly used for lighting fixtures, household appliances and motor tools safety test on the production line or in the R&amp;D laboratory. Standard:IEC/EN 60335-1:2023/GB 4706.1-2024 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 60335:2022 “Standard for Safety of Household and Similar Appliances, Part 1: General Requirements”IEC 60598:2024/GB 7000-2023 “Luminaires – Part 1: General requirements and tests”IEC 60950:2020 “Information technology equipment Safety –Part 1: General requirements “IEC 62368-1:2023/GB 4943-2022 “Audio/video, information and communication technology equipment – Part 1: Safety requirements”IEC 60601-1 3.1:2012/ GB 9706.1-2020 “Medical Electrical Equipment – Part 1: General Requirements For Basic Safety And Essential Performance” Specification:• Remote control device and can control by software (Optional)• Display all setting parameters and testing results in the same big LCD screen• PASS/FAIL limit values can be set.If the object fails the test, there will be a light/sound alarm• Test mode is programmable; 50 groups settings are available, 8 test steps per group• Quick discharge. Support 50Hz and 60Hz frequency; Electric safety wall detecting feature• The LS9955 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC) and Ground Resistance (GR)• The LS9956 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC), Ground Resistance (GR) and Power Withstand Voltage Test (AC/DC)Insulation Resistance Test (IR)Voltage RangeAccuracyCurrent RangeIR RangeAccuracyVoltage Range100~4000V± (5%+3V)AC: 0.10~20.00mADC: 0.10~12.00mA1.00~2000MΩ5% + 0.5MΩDC100~1000VLeakage Current Test (LLC)Grounding Resistance Test (GR)LLC RangeAccuracyVoltage RangeGR RangeAccuracyOutput Current0.10~20mA± (0.3%+5uA)AC10.0~300.0V0~600mΩ± (5%+2mΩ)AC1.00~30.00APower TestVoltageCurrentPowerPFAccuracyTest Time10~300V0.010~20.00A1.0~6000.0W0.2~1.0Class 0.50~999.9sP.S. The LS9955/LS9956 of Leakage Current Test (LLC) needs to work with LISUNITEU-SP1KS or ITUS-SP1KS Isolation Transformer (The Output is 1.06times of the input). The LS9955/LS9956 of Leakage Current Test (LLC) and Power Test need to work with LISUNLSP-1KVARC orLSP-1KVAS AC Power Supply. 

Automatic Safety Test System

Hongkong Newlite Technology Limited

UL Listed for field or factory installationCertified for CA Title 20NFPA101(Life Safety Code)NFPA70(National Electrical Code)Waterproof 2-in-1 LED test button and indicator light included.5-Year WarrantyRoHS Compliant EMl (Radiated and Conducted)........FCC Part 15BProduct types reducing product SKUs for emergency options.Self-Test 

The JL-X includes the following water proof IP codes: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 ofIEC 60529). It is widely used in the authentication test organization for the products such as electrical &amp; electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades. Standard:IEC 60529:1989 +A1:1999 +A2：2013 “Degrees of protection provided by enclosures(IP Code)”IEC 60598 “Luminaires – Part 1: General requirements and tests”IEC 60335 “Household and similar electrical appliances – Safety – Part 1: General requirements”IEC 60034-5 “Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification”GB 7000.1 “Luminaires-Part 1：General requirements and tests” The whole JL-X waterproof test system includes:• Drip Box (JL-12): The drip box meets the test requirements of IPX1 and IPX2 in Clause 14.2.1-14.2.2 and Figure 3 of IEC 60529:1989 +A1:1999 +A2：2013. The drip box size is 800x800x45mm (LxWxH). The diameter of drip hole is 0.4mm. The distance between drip holes is 20mm. It can test samples over 150kg. •Swing Pipe Water Spray Test Equipment (JL-34):It meets the test requirements of IPX3 and IPX4 in Clause 14.2.3-14.2.4 and Figure 4 ofIEC 60529:1989 +A1:1999 +A2：2013. The radius of oscillating tube is 1meter (Any other size is also available). The internal diameter of the tube is 15mm. The sample turntable diameter is 1000mm (Other sizes are optional according to the diameter of the oscillating tube), and the height is adjustable. It includes a water tank. The rotation speed is 1~5rpm which can be set and controlled by PLC panel. • Spraying Nozzle and Splashing Water Hand held Test Device (JL-34S):It meets the test requirements of IPX3 and IPX4 in Clause 14.2.3-14.2.4 and Figure 5 ofIEC 60529:1989 +A1:1999 +A2：2013• Water pressure regulation requirement: The water pressure is adjusted to achieve the specified flow rate, and the required pressure range is 50 kPa to 150 kPa.• Test duration requirement: The test duration is 1 minute per square meter of the calculated surface area of the shell (excluding any mounting surface), and the minimum test time is 5 minutes.• The JL-34S includes the following: a pressure gauge, an 8m long water pipe and a Sprinkler with a 5mm Spray Nozzel. • Waterproof Jet Test Device (JL-56): It meets the test requirements of IPX5 and IPX6 in Clause 14.2.5-14.2.6 and Figure 6 of IEC 60529:1989 +A1:1999 +A2：2013. With a 780*580*1100mm size water tank, the nozzle diameter is ф6.3mm (IPX5 waterproof test ) and ф12.5mm (IPX6 waterproof test). The water flow is 12.5 ±0.625L/min for IPX5 and 100 ±5L/min for IPX6  

IP Waterproof Test Equipments

Transient High Voltage Impulse Generator is a 1.2/50μs transient over-voltages tester. The shortest polarity interval time can be 1s. The standard voltage waveform complies with theIEC 60335, IEC61180, IEC 62052-11: 2003, IEC 61008-1: 1996, IEC 61009-1:1996, IEC 60947-1: 1995, IEC60060, IEC1036, etc. It is used for safety testing to determine if the clearance is fulfilled the safety requirement while the transient voltage in the circuit. Standard:IEC 60335 “Safety of household and similar electrical appliances Parts 1:General requirements”IEC 62052-11: 2003 “Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment”IEC 61008-1: 1996 “Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 1: General rules”IEC 61009-1: 1996 “Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 1: General rules”IEC 60947-1: 1995 “Low voltage switchgear and controlgear – Part 1:General rules”IEC60060 “High-voltage test techniques – Part 2: Measuring systems”IEC1036 “Alternating current static watt-hour meters for active energy(Classes 1 and 2) “ Specification:• Time of surge wave front: 1.2µs ± 30%• Time of half value of wave tail: 50µs ± 20%• Surge voltage: 1 ~ 12.5kV ≤ ±3%• Output Impendence: 42Ω• Polarity interval (Adjustable): 1 ~ 99s (According to the requirements of Clause 14 on page 43 of IEC60335:2010+A1:2013)• Surge times (Adjustable): 1 ~ 9999 times• Polarity: positive and negative• How to check the Waveform: Built-in surge voltage probe (1000:1), connect with LISUN OSP1102 Oscilloscope directly 

Transient High Voltage Impulse Generator | IEC60335

The EDX-2 series energy scattered X-ray fluorescent spectrometer is realized by analyzing the element characteristic X-ray wavelength and strength of the element emitted by the sample. The elements contained in the sample are determined according to the different elements characteristics of the X -ray wavelength, and the content of the element in the sample can be determined by comparing the strength of the different elemental spectrum. SpecificationEDX-2AEDX-2ACEDX-2ABEDX-2ABCEDX-2TTypeNon -pumping air desktopVacuum desktopWeight50KG55KGTest time200S100SSample cavity size610*320*100mm (L*W*H)510*310*120mm（Non -vacuum）Ф100*70mm（vacuum）Test environmentatmosphereVacuumDetectorSi-pinSDDResolution149 Electronic Volt129 Electronic VoltOutput tube pressure, current50KV/600uA（Can automatically set）50KV/600uA（Can automatically set）Test sample typeSolid, liquid, powderNon -vacuum: solid, liquid, powderPumping vacuum: solidContent analysis range2ppm–99.99%2ppm–99.99%Test itemsTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 1：RoHSTypic Application 3:Coating and Plating ThicknessTypical application 2:alloy analysisTypical application 2:alloy analysisTypical application 2:alloy analysisTypic Application 3:Coating and Plating ThicknessTypic Application 3:Coating and Plating ThicknessMetal test element rangeCan not testAll elements in thePeriodic Table of Elements from 16-S to 92-U are available for alloy analysis (iron, copper, stainless steel,Au (gold),Pt (platinum) , etc)All elements in thePeriodic Table of Elements from 11-Na to 92-U are available for alloy analysis (magnesium aluminum alloy, ore component, iron, copper, stainless steel,Au (gold),Pt (platinum) , etc)Typic Application 1（LISUN Model：EDX-2A、EDX-2AB、EDX-2AC、EDX-2ABC、EDX-2T）: Restriction of Hazardous Substances (RoHS) 1.0 Directive Testing for electronic and electrical products, components, plastics and plastic parts. Click here to download the ROHS 1.0 test report sample. The main test substances in RoHS requirements are as follows: Limit substance Limit content Hg 1000ppm CrVI 1000ppm Cd 100ppm Pb 1000ppm PBBs 1000ppm PBDEs 1000ppm 

RoHS Testing Equipment – Element Analysis – Thickness Gauge (EDXRF)

The ZRS-3H Glow-wire Test Apparatus is used to test the flammability of plastic sheets or other insulating materials. The specimen is exposed to a high temperature glow wire (nickel/chrome wire) through a standard test procedure. It is used to identify whether the insulating material does not reach a certain temperature or ignite to prevent fire hazards around it. What is glow wire test?The Glow wire tester ZRS-3H/ZRS-3HS is mainly used to test the ignition performance, ignition temperature, flammability and flammability index of lighting equipment, electronic products and household appliances. The equipment adopts high-temperature sprayed steel structure and imported instrument display, which is easy to operate and has stable test performance. This equipment is mainly used for flame retardancy testing by QC departments and related enterprises. Standard:IEC 60695-2-1:2021(VDE0471:2019) “Fire hazard testing – Part 2: Test methods – Section 1/sheet 1: Glow-wire end-product test and guidance”IEC 60695-2-11:2021(GB/T5169.10-2006)”Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end products (GWEPT)”IEC60695-2-10:2000 “Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure”IEC 60695-2-12:2021 “Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods – Glow-wire flammability index (GWFI) test method for materials”IEC 60695-2-13:2000 “Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods – Glow-wire ignition temperature (GWIT) test method for materials”IEC 60335:2023 “Household and similar electrical appliances – Safety – Part 1: General requirements”UL 746A:2021 “Standard for Polymeric Materials – Short Term Property Evaluations”IEC 829 Specification:• Heating temperature: adjustable continuously within the range of 25~1100°C, the accuracy of temperature is 3°C, the resolution of temperature is ±1°C• Glow-wire time: 0.1-999.9s，±0.1s(time range is adjustable)• Ignition time: 0.1-999.9s (auto record, manual pause)• Flame-out time: 0.1-999.9s (auto record, manual pause)• Glow wire pressure on test specimen: 0.95±0.1N. Limiting pressure depth is 7mm.• Glow wire: φ4 nickel (80％) and chromium (20％). Made in specific dimensions.• Thermocouple: φ1 armored nickel-chromium/nickel-aluminum wire, K Type.• Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. 

Glow-wire Test Apparatus

The electromagnetic interference generated during the normal operation of a vehicle can enter the power and signal lines of onboard electronic devices through conduction and coupling, leading to reduced functionality, temporary malfunctions, or even damage. The EMS-ISO 7637 Multifunctional Immunity Test System For Automotive Electronics simulates various typical electromagnetic disturbances produced during vehicle operation, while also replicating the changes in the vehicle’s power supply under conditions such as engine startup, switching of electronic devices, and battery charging/discharging. The waveforms generated by the EMS-ISO 7637 system comply with the immunity testing requirements of most automotive manufacturers for onboard electronics. Standard:ISO7637-2 “Road Vehicles – Conductive Coupling Electrical Interference – Part 2 Electrical Transient Conductivity Tests for Power Lines“ISO7637-1 (GB-T21437.2 )”Road vehicles – Electrical disturbances from conduction and coupling – Part 1: Definitions and general considerations” Technical Characteristics:• Operation Interface: It features a large LCD color display and adopts a main module expansion architecture, offering a high level of intelligence. The system is user-friendly and facilitates easy operation, as well as future upgrades and updates.• Designed for 12V/24V automotive electronic immunity test.• Tested Product Capacity: DC 80V/100A, unified port output.• Built-in various host interfaces and it can work with LISUN software on a PC.• The software includes all relevant standards, and customers can also add or update the standards. System Configuration:Note: Please click here to download the EMS-ISO7637 System Brochure and EMS-ISO7637 and LISN200 CNAS Calibrate Certificate to learn more. Product NameLISUN ModelSpecificationMultifunctional Immunity Test instrument HostLIS-7600Mainly responsible for parameter configuration and status control of various waveform modules, and can be connected to a computer to enable upper-level control.P1/2a SimulatorLIS-7610Pulse 1 &amp; Pulse 2aP2b/4 SimulatorLIS-7620Pulse 2b &amp; Pulse 4P3 SimulatorLIS-7630Pulse 3a &amp; Pulse 3bP5a/5b SimulatorLIS-7650Pulse 5a &amp; Pulse 5bArtificial NetworkLISN200Transient conducted emission EMI test, in conjunction with the TES200N as an integrated unit.SwitchTES200NTransient conducted emission EMI test, integrated with the LISN200 as a single unit.Capacitive Coupling Clamp (CCC)(Optional)VFTCISO 7637-3 testing, automotive electronic interference test.Current Injection Probe(Optional)F-120-6AISO 7637-3 Inductive Coupling Probe (ICC) testing, specifically for slow pulse ISO 7637-3 testing.

Multifunctional Immunity Test System For Automotive Electronics

 东莞市石龙富华电子有限公司

 Features:  	 Protections against: short-circuit/ over-current/ over-voltage/ overload/ over temperature 	 Comprehensive protection can effectively prevent lightning strikes 	 IP20 design for indoor application 	 High efficiency within a wide range of output power 	 Fireproof plastic housing 	 LED load less than 100%  
 Electrical specifications:  	 Input voltage range: 180 to 264V AC 	 Efficiency: 88% 	 THD: ＜20% 	 Power factor: &gt;0.9 	 MTBF: &ge;150,000 Hours,MIL-HDBK-217F(25℃)  
 Environment parameters:  	 Humidity: 5 to 95% RH 	 Operating temperature: 0 to 40℃ 	 Storage temperature: -20 to 60℃ 	  Safety:  Meets CCC(GB19510), CE(EN61347) 	  EMC standards:  EN55015, EN61347, EN61000, GB17743, GB17625,FCC PART 15 	  Dimensions (L x W x H):  125 x 62 x 34mm 	  Weight:  230g 	  Applications:  Industrial computer LED lighting  

60W LED Driver 61347

洋鑫科技股份有限公司


 Features&gt;&gt;  	 Compatibility with DALI standard (IEC62386 Part 102 &amp; Part 206) 	 DALI signal line regardless of pole 	 Screw-less connector, easy to install 	 Selectable output for PWM / DC 0-10V / DC 1-10V 	 Selectable dimming curve for logarithm or linear 	 Build-in Relay to turn ON/OFF driver completely 	 3 years warranty   Specifications&gt;&gt; 

 Electrical Specification: &nbsp; &nbsp; &nbsp; MIN. &nbsp;TYP. &nbsp; MAX. 
Input Voltage(VAC): &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;90 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;290
Power Consumption(W): &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.6 &nbsp; &nbsp; &nbsp; 3
 DALI Bus Current Consumption (mA): &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;2
Suitable Electric Wire (AWG): &nbsp; &nbsp; &nbsp; &nbsp;22 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;16
PWM Frequency(Hz): &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;500
PWM High Level Voltage (VDC): &nbsp; &nbsp; &nbsp; &nbsp;9.5 &nbsp; &nbsp; 10 &nbsp; &nbsp; 10.5
PWM Low Level Voltage (VDC): &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;0
PWM Output current sourcing (mA): &nbsp; &nbsp;-60 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 60
DC 0/1-10V output accuracy: &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &plusmn;3% 
 DC Output current sourcing (mA): &nbsp; &nbsp; &nbsp;-5 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 60 

 Other Functional Description: 
Compatibility DALI Standard: IEC62386 Part-102 &amp; Part-206
DALI Input reversed protection: Yes
Number of output channel: 1
Output channel short protection: Yes
Weight:  100g&plusmn;10% 
Dimensions (L&times;W&times;H): 150&times;40&times;28 mm
Operating Temperature Range: -20~+40&deg;C
Relay Switch (1 channel ): 2A /Max inrush current 70A
&nbsp;

LED DALI Interface Converter

IEC62471-2006(CIE S009) Photobiological Safety of Lamps and Lamp System and IEC TR62471-2(2009) Guidance on Manufacturing Requirements Relating to Non-laser Optical Radiation Safety have be published addressing hazard to human (mostly eye and skin), and are completely suitable to assess the optical radiation safety of non-laser sources, such as LED products, UV radiation in general lighting products and etc. The hazard exposure level of optical radiation may be related from 200nm to 3000nm. It is based on the measurement of spectral irradiance and spectral radiance in specified measuring geometry relating with exposure duration. Standard:IEC62471-1/EN62471-1 “Photobiological safety of lamps and lamp systems”CIE S009 / GB/T 20145” Photobiological Safety of Lamps and Lamp Systems”IEC62471-6:2022 “Photobiological safety of lamps and lamp systems – Part 6: Ultraviolet lamp products”IEC62471-7:2023 “Photobiological safety of lamps and lamp systems – Light sources and luminaires primarily emitting visible radiation”IEC/EN 60598/GB 7000.1 “Luminaires-Part1:General requirements and tests”IEC/EN 60432 “Incandescent lamps – Safety specifications – Part 1: Tungsten filament lamps for domestic and similar general lighting purposes”IEC60335-2-27 “Household and similar electrical appliances; Safety – Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation”IEC60335-2-59 “Household and similar electrical appliances – Safety – Part 2-59: Particular requirements for insect killers” The IEC 62471 measurement equipment is specialized for the optical radiation hazard exposure level measurement in IEC 62471. •Actinic UV hazard exposure (weighted irradiance from 200nm to 400nm) for the skin and eye•Near-UV hazard exposure (irradiance from 315nm to 400nm) for the eye•Retinal blue light hazard exposure (weighted radiance from 300nm to 700nm)• Retinal blue light hazard exposure(weighted irradiance, 300-700nm) – small light source• Retinal thermal hazard exposure (weighted radiance from 380nm to 1400nm)•Retinal thermal hazard exposure (weighted radiance; 780-1400nm) – weak visual stimulus•Infrared radiation hazard exposure (irradiance from 780nm to 3000nm) for the eye• Thermal hazard exposure (irradiance from 380nm to 3000nm) for the skin Specification:•Wavelength range: 200nm to 800nm (EN62471-A), 200-1500nm (EN62471-B) and 200-3000nm (EN62471-C)• Wavelength accuracy: 0.1nm(UV), 0.2nm(VIS), 0.4nm(IR)• Optical path design: Simulate the imaging optical path of the human eye to accurately evaluate the effective radiation of the human eye’s retina• Incident aperture: Φ7mm light-receiving aperture, suitable for measurement requirements in all scenarios• Measuring field of view (fully meeting the standard requirements according to the radiation duration):1) Effective radiant luminance measurement: 1.5mrad~110mrad (1.7mrad, 11mrad, 100mard)2)Effective irradiance measurement: 100mrad, 1.4rad and 2πsr  

我的采购