钉子

漳州市东方智慧型仪器表有限公司

 	 The ground search metal detectors can be used for the detection and identification of the metals underground 	 Alarm Mode: Light, audio (beep or earphone) 	 Adjustable sensitivity 	 Max. Depth: 1.5m 	 Lithium battery 	 Power Source: DC 5V / 0.6W, 1250mAh, lithium battery x 1pc  

Ground Search Metal Detector

美特(中国)有限公司

- Heavy duty rubberized cabinet
- Insulation testing up to 1000V
- Insulation breakdown voltage ramp feature
- Continuity feature
- Null function for accuracy
- Breakdown voltage diagnostic function
- Hands free function for use with continuity or insulation tests
- Fully protected against accidental connection to mains voltage
- Connection shown by red LED and an audible warning
- Visual and audible warning of voltage present
- Auto discharge of capacitive circuits
- Battery powered : 4 AA (R06 / LR06)
&nbsp; &nbsp;

Insulation and Continuity Tester

SHENZHEN VICIMETER TECHNOLOGY CO.,LTD.

VC60B+ Insulation Tester  Features: An accurate, reliable and easy-to-use insulation tester Large LCD display, easy to read Strong anti-magnetic and anti-jamming function Full function protection, anti high voltage circuit design Unit symbol display, easy to use High voltage and short circuit input alarm  Technical Data: Basic function Range Accuracy Resolution Insulation Resistance 250V±10% test voltage 0~200MΩ ±(4.0%+2) 100kΩ 500V±10% test voltage 0~200MΩ 100kΩ 1000V±10% test voltage 0~2GΩ 1MΩ Resistance 0~2kΩ ±(1.0%+5) 1Ω DCV 0~1000V 1V ACV 0~750V ±(1.5%+5) 1V  Special Function: Model VC60B+ Continuity alarm Less than 30Ω±10Ω Low battery indication Less than approx.7.5V Data hold √ LCD backlight Approx.10Sec. Function protection √ Input impedance 1MΩ Sampling rate 3 times/Sec. AC frequency response 50-200Hz Operation mode Manual range Max. display 1999 LCD size 75 x 52mm Power source 1.5V AA battery x6pcs, or external DC 9V power source Power consumption Quiescent current approx.3mA  General Characteristic: Color Orange and Gray Weight 580g (including battery) Meter size 176 (L) x116 (W) x63 (D) mm Standard accessory Test lead, shoulder strap, battery, operation manual Individual packing Gift box Master carton packing 20pcs Master carton size 37.5*36*43CM Master carton weight  17.5KG  

Vicimeter VC60B+ Insulation Tester for Motor, Cable, Electromechanical equipments

VC4060C ­­Digital Motor Checker  Features: Comprehensive Testing:3 in 1: Insulation resistance(IR), milliohm resistance and inductance;Efficient and Durable:*Data hold, backlight, low voltage indication, auto power off; *Simple operation, rapid status evaluation, and a shockproof rubber body. Application Areas:New energy vehicle repair, electrical installation, equipment maintenance,electronic manufacturing, power equipment installation, research, etc.Non-destructive Fault Detection:Detect rotor coil winding issues without disassembling the motor.*Identify open/short circuits and poor contact in winding coils.*Detect inductance differences caused by loose or broken rotor coils.*Test insulation between motor coil windings, between windings and motor casing. Technical specifications: Basic function Range Basic accuracy Resistance 200mΩ/2Ω/20Ω/200Ω ±(3.0%+10) Inductance 6mH/60mH/600mH/6H/99.99H ±(1.5%+5) Insulation 500MΩ for 500V, 6000MΩ for 1000V ±(4.0%+2) Special function: Model VC4060C Max. display 2000 Data hold √ Backlight display √ Operation method Manual/Auto range Auto power off Approx.15minutes Low battery indication Approx. less than 7.6V Sampling rate 3times/s LCD size 65×40mm Power supply 9V (6x1.5V AA) Power dissipation Quiescent current approx. 6mA Safety level CAT. III 600V General Info: Color Orange holster and Grey device Weight 480g (including battery) Meter size 200x92x50mm Standard accessory Test leads, battery, manual, handbag Packing Gift box Quantity per carton 20pcs 

VC4060C Digital Motor Checker for DC milliohm Insulation Inductance Testing

Features: 1.   New type holster, streamlined design, comfortable handle; 2.   Large LCD display makes reading clear; 3.   Strong antimagnetic and anti-interferential performance, full function protection; 4.   Auto power off when there is no measurement in 15 minutes; 5.   Unit symbol display, easy to read; backlight display; 6.   Insulation Resistance Test, inductance, True RMS, non-contact voltage detection, frequency/duty cycle, and data hold function.  Technical specifications: Basic function Range Accuracy DCV 600mV/6V/60V/600V/1000V ±(0.5%+5) ACV 6V/60V/600V/750V ±(0.8%+10) DCA 6mA/60mA/600mA/6A/20A ±(1.0%+5) ACA 6mA/60mA/600mA/6A/20A ±(1.5%+10) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±(0.8%+2) Capacitance 60nF/600nF/6uF/60uF/600uF/6mF/60mF ±(2.5%+5) Inductance 6mH/60mH/600mH/6H/60H/100H ±(1.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/50kHz (@ ACV range) ±(1.0%+3) Insulation 500MΩ for 500V, 2GΩ for 1000V ±(4.0%+2) Temperature -40℃~1000℃ | -40℉~1832℉ ±(1.0%+5) Special function:  Max. display 6000 Safety level CAT. III 600V True RMS √ NCV √ Function Protect √ Diode test √ Continuity test Warning sound when less than 50Ω Duty cycle measuring √ Data hold √ Backlight display √ Max-Min MAX., MIN. value and difference value between MAX and MIN Auto power off Approx.15minutes Low battery indication Approx. less than 7.6V Input impendence 10MΩ Sampling rate 3times/s AC frequency response 40Hz-2kHz Operation way Manual or auto range LCD size 65×40mm Power 6x1.5V AA battery Power dissipation Quiescent current approx. 6mA  General Info: Color Orange holster and Grey device Weight 480g (including battery) Meter size 200mm×92mm×50mm Standard accessory TL98A test leads, TL1358 crocodile clips test leads, TP01 temperature probes, 6pcs 1.5V AA battery, English manual, Black handbag. Packing Gift box Quantity per carton 20pcs Carton size 46.5*31.5*29.0cm GW per carton 17.0kg  

Vicimeter VC4060B+ Insulation Induction Multimeter for new energy applications

 	 Detect 2&quot;x4&quot; stud upto 0.75&quot; (18mm) thickness of drywall 	 Auto Calibration 	 With sound and light feedback 	 Compact in size and user friendly 	 Operated by 1.5V x 2 pcs. button cell batteries (LR44, AG13, L1154 etc.) 	 Batteries included  

Stud Detector with keychain_

This is a multifunctional metal detector with a sleek and elegant appearance. It is used to detect the presence of metal nearby. This metal detector is easy and safe to operate.

 Key Specifications/Special Features: 

- Detect metal&nbsp;
- Non-contact AC Voltage: 70-600VAC&nbsp;
- Continuity check: 0-50M ohm&nbsp;
- DC Polarity check: 6 - 36VDC&nbsp;
- Ionizer test&nbsp;
- Foldable sensing arm up to 90o&nbsp;
- Compact in size&nbsp;
- Audible and visible&nbsp;
- Battery powered : &nbsp;2 x 1.5V (L1154 / LR44 / AG13)&nbsp;
- Dimension (LxWxD) mm : 140x30x20&nbsp;
- Worldwide patent pending&nbsp;
- Originated, designed and developed by MEET

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Multifunctional Metal Detector

深圳市励骏光电有限公司

Wireless OBDII trip monitor Diagnostic Adapter for Android and iSO phones 	 Wireless Diagnostic Adapter CBlackbox-BT(BLE327)Bluetooth 4.0 	 Operate the diagnose on iphone/iPad and Android Smart phone via Bluetooth 4.0 	 Works with all OBD-II compliant vehicles 	 Wireless (Bluetooth 4.0) in10 meter 	 Software included for Android and iPhone 	 All Apps for Android and iPhone are designed by ourselves, download for free via Internet.  Functions: 	 Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions ). 	 Clear trouble codes and turn off the MIL (&quot;Check Engine&quot; light) 	 Display real-time driving data, including:	 		 Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Timing Advance, Horsepower,&nbsp; Engine load 	 	 	 All data are counted for each trip as each day, each week, each year. 	 Record every day and every month driving information. 	 Including the driving time, driving mileage, average speed, max speed, max RPM, fuel consumption, fuel cost. 	 Track each trip route in Google Map, including the starting time, stop time, driving time, Max speed, average speed, Max RPM, fuel consumption, Fuel cost. Etc. 	 Maintenance record and remind for oil reset, brake replace, air filter, wheeled transposition. tire, nozzle ,etc 	 Support mobiles: All iOS and Android smart phone with Bluetooth 4.0 	 iOS (iPhone 4S,5, 5C, 5S and later, iPad 2，iPad Air, iPad mini, iPad mini 2 and later) 	 At least Android 4.3 (support for Bluetooth 4.0 phones)  Vehicle Coverage 	 All OBD2 &amp; EOBD compliant vehicles with a 16-pin interface(include all 1996 and newer cars, light trucks and SUVs sold in the United States, all 2000 and newer sold in the Europe, Japan and Asian Area) CAN, VPW, PWM, ISO9141, KW2000 protocols compliant vehicles(including those equipped with the next-generation protocol Control Area Network.)  

Wireless OBDII Trip Monitor Diagnostic Adapter

港芝国际有限公司

Features:   A simple and accurate electromagnetic (EMF) gauss meter.  Specifications:   Size: 4x1-3/4x7/8 inch.   Weight: 2.5 oz. including battery.   Power: single 1.5V AAA alkaline battery (included).   Display: 10 high visibility LEDs.   Display range: 1.34 to 30 milliGauss.   Detection range: 50-60 Hz.   Accuracy: +/- 3dB over full range calibration traceable to NBS standards.  

Electrosensor (Electromagnetic Field Detector)

VC732A 3 1/­2 Digital Multimeter Features: New type holster, streamlined design, comfortable handle; Large LCD display makes reading clear; Strong antimagnetic and anti-interferential performance; Full function protection; Auto power off when there is no measurement in 15 minutes; Unit symbol display, easy to read; Lighting function, backlight display. True RMS, Non-contact voltage detect (NCV), relative value measurement, frequency/duty cycle and data hold function.  Technical Data: Basic function Range Basic Accuracy DCV 200mV/ 2V/ 20V/ 200V/ 1000V ± (0.5%+5) ACV 200mV/ 2V/ 20V/ 200V/ 750V ± (0.8%+10) DCA 200uA/ 2000uA/ 20mA/ 200mA/ 2A/ 20A ± (1.0%+5) ACA 200uA/ 2000uA/ 20mA/ 200mA/ 2A/ 20A ± (1.5%+10) Resistance 200Ω/ 2kΩ/ 20kΩ/ 200kΩ/ 2MΩ/ 20MΩ ± (0.8%+2) Capacitance 20nF/ 200nF/ 2uF/ 20uF/ 200uF/2000uF ± (2.5%+5) Frequency 10Hz/ 100Hz/ 1kHz/ 10kHz/ 100kHz/ 1MHz ± (0.5%+4) Temperature -40℃～1000℃/-40℉～1832℉ ± (1.0%+5)   Special function: Max. display 2000 True RMS √ NCV √ Data hold √ Function protection √ Torch function √ Backlight display √ Duty cycle 1%~99% Triode (hFE) test √ Diode test √ Continuity alarm Less than 50Ω Low battery indicator Approx. less than 2.4 V Auto power off About 15 minutes Input impedance 10MΩ Sampling rate 3 times/s AC frequency response 40Hz-1kHz Operation method Manual or Auto range LCD size 65x43.5mm Battery 3V (2*AAA battery) Power consumption Quiescent current about 2mA General Info: Meter color Orange + Grey Meter weight 306g (including battery) Meter size 190×92×50mm Standard accessory Test leads, battery, manual, TP01 temperature probe Standard packing 30pcs G.W. per carton 15kg Carton size 43.5*29.5*42.5cm  

VC732A High Figure Large LCD Display Digital Multimeter

  Introduction :  

External wireless connectivity moisture meter is designed for use in wide applications, such as : 	 For locating water leaks behind walls, above ceilings and below floors. 	 For wood working, measure moisture content before finishing, painting processing. 	 For textile industries, regular check moisture content of fabrics and leathers, quality check to prevent mold. 	 For printing industries, check moisture content of paper before printing. 	 One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC to view data, record reading, capture picture with data on it and send the information to headquarter.  
  Key Specifications/Special Features :   	 Sense type : Spherical / pin-point non-destructive / remote pin 	 External output jack for pin type measurement 	 Replaceable sense stick &amp; stainless steel pins with protective cover 	 Auto zero calibration and self-calibraton check 	 Measuring : 6.0-87.6 (% WME) or 0.1-99.9 REL 	 Relative reading (Rel) 	 Large LCD with backlight display + Color 32 dot LED (bar type)&nbsp; 	 User pre-set selectable mode that is APO, alarm&nbsp; 	 Measure wood / concrete moisture&nbsp; 	 5V (DC) input 	 Auto Power Off when below 5.5V within : &lt; 10 secs. 	 Non-destructive measuring depth : 100mm / 4.0 inches max. 	 Low battery indication : &lt; 6.5V 	 Operating current : &lt; 70mA max. 	 Freeze / Hold reading 	 Audible sound 	 Standalone mode : without external wireless module 	 Wireless connectivity transmit data to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately) 	 Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately) 	 Battery powered : 1 x 9V (6F22 / 6LR61 / 1604)&nbsp; 	 Dimension (LxWxD) mm : 240x70x40 	 Weight (approx.) grams : 205 (without battery)&nbsp;  

Wireless Connectivity Moisture Meter with pin type and sense stick 

 	 With earphone 	 Desensitize button 	 Vibration alarm 	 LED light alarm 	 Audio alarm 	 E-SUN metal detectors have ever been used in the &quot;16th Congress&quot; &amp; &quot;Two Congress&quot;, being designated by Guard Department as security instruments at Tiananmen (Beijing, China) district  

Hand-Held Metal Detector

Widely used in electro-optical source, research teaching, industry inspection as well as agriculture researching and illumination control
Large LCD display 	 Backlight LCD display 	 Data-hold function  Specifications 	 Range:1~50000 Lux in 3 ranges 	 Sampling Rate: About 2 times/sec 	 Sensor: Silicon photodiode &amp; filter 	 Weight: 198g 	 Power Source: 9V (6F22) battery x 1pc  

Digital LUX Meter

联力香港实业有限公司

Customized contact probe, spring test probes, pogo pin connector and PCB test pin for PCB electronic product testing Spring Loaded Pogo Pin, test pin, contact probe and receptacle are developed especially for testing electrical requirements in a veriety of applications. They provide a reliable means to test in bare or loaded printed circuit boards and other circuitries where a number of contact points must be accessed.

&nbsp; 	 Brass Assembly components - Test Probe, Pogo Pin and Pin Interconnect 	 Material: Brass, Bronze, Beryllium Copper 	 Request Parts: Plunger, Barrel and Spring 	 Head Style: Concave, Convex, Flat, Spear Point, Serrated, Star, Spherical Radius 	 Diameter of Barrel: 0.68mm, 1.01mm, 1.37mm, 2.02mm, 2.36mm 	 Treatment: Nickel-plated or gold-plated over nickel 	 Spring Pressure: 80g, 100g, 150g, 200g, 250g 	 Reference: Pogo Pin connector, Test Probe, Contact Probe, pin connector, cnc machining pogo pin and probe 	 The probe has spring pressure of 80gms~150gms. 	 The gold plated allows current rating of 3A~10A. 	 These pins have contact resistance of 10ohm~50ohm and durability of 100,000 cycles. 	 The pin contact are made of brass, beryllium (Be) and copper (Cu). 	 Used for Printed circuit board electronic products testing  Why you select us:
1. Good quality stainless steel product
2. Unique design
3. Immediate quotation
4. Competitive price offer
5. prompt delivery
&nbsp;

Spring Loaded Pogo Pin

石家庄数英仪器有限公司

 	 Output: 1 channel 	 Direct digital synthesis technology 	 Crystal oscillation reference 	 Pulse: Logic Positive/Negative 	 High accurate time and frequency 	 Count burst or single burst both can be selected 6. trigger/frequency standard input channels 	 Data storage and recall 	 Optional GPIB and USB interface  

SU5303 Pulse/Pattern Generator

 	 Output: 2 channels 	 Max output frequency can reach to 400MHz&nbsp; 	 2GSa/s sample rate, 14-bit vertical resolution 	 The complete function of modulation, sweep and burst 	 Standard interface including USB Host &amp; Device and LAN  

TFG2942A Arbitrary Waveform Generator

 Features: 

- 200 - 250VAC&nbsp;
- Neon indication for wiring conditions&nbsp;
- Test BS 1363 sockets&nbsp;
- 30mA RCD / ELCB trip test&nbsp;
- Dimension (LxWxD) mm : 50x52x50&nbsp;
- Packaging: Standard PVC Sliding blister card

&quot;FREE&quot; shipping cost arranged by &quot;First Come First Serve&quot;. Valid to 31 Mar 2018 for samples ordering only.

Socket Tester

 	 Measuring range: 400V max 	 Range: 3mV, 30mV, 300mV, 3V, 30V, 300V/400V 	 ​Frequency range: 5Hz~3MHz  

SM2130 AC Millivolt Meter

深圳泰瑞谷科技有限公司

 OM126  	 NW: 0.26kg (0.57lb), GW: 0.35kg (0.77lb)  

Scanner Reader

雷鸣五金有限公司

Displayed here is a 6 in 1 screwdriver for watch repair. This screwdriver is made of strong replacement reversible straight blades for screwdrivers in 6 sizes stored in the handle. It is equipped with an adjustable clamp. 	 6 in 1 screwdriver for watch repair. 	 Replacement reversible straight blades in 6 sizes. 	 Blades can be stored in the handle for added convenience. 	 Equipped with an adjustable clamp. 	 Knurling on the body to provide a firm grip. 	 High durability. 	 Easy to exchange different blades. 	 Practical and versatile tool.  

Watch Repair Screwdriver

Ulinktek (Shenzhen) Industries Co., Ltd.

Visually inspect the interiors of pipelines, plumbing systems and storm drains with this rugged and reliable pipeline video inspection system. This presented system is equipped with eighteen high-beam white LEDs and a 7/10” TFT LCD monitor so it lights up the interiors of the pipelines and displays clear images to facilitate effective checking. Combining a user-friendly design, a high-quality construction and durable materials, this system is the key to guiding maintenance and repair work. Equipped with a 7"/10" TFT LCD monitor.Waterproof.DVR ready through USB port.OPTION: 20/30/40M CABLE WITH METER COUNTER OPTION: 23MM METAL CAMERA/ WITH AUTO-LEVELING FUNCTION/WITH TRANSMITTER OPTION: 4400MAH LI-ION BATTERY OR 6600MAH LI-ION BATTERY 

Waterproof Pipe Video Inspection System 

    SpringBar tool     or pin remover is used for remove the spring bars in the watches. They have various design and easy to use. Aluminum spring bar remover with point and fork end pieces.
   Product Specifications:    	 Model: TUM1002-BK 	 Description: Watch Band Link Pin Remover 	 Plating: Black-plated 	 Material: Aluminum 	 Easy to use to change the strap&nbsp;and band. 	 Replacement: Spare pin and spare fork can be changed. 	 Light and can be coated any color, e.g. blue, gold, black. white... etc. 	 The company logo is available by using a Laser or Silkscreen treatment method. 	 OEM design is accepted  Why you select us: 	 Good quality stainless steel product 	 Unique design 	 Immediate quotation 	 Competitive price offer 	 Prompt delivery  

Spring Bar Tool Pin Remover

 	 Plastic watchband stand holder for holding the band tightly with different width. 	 Easy to use&nbsp;for watchmaker to fit the band. 	 Imprint silkscreen company logo are available. 	 handy tool for watch, mostly use with hammer and punch pin.  

Why you select us:
1. Good quality stainless steel product
2. Unique design
3. Immediate quotation
4. Competitive price offer
5. prompt delivery

Watchband Stand Holder for Band

菁盛企业有限公司

Shown here is&nbsp;a&nbsp;cable testing kit designed for&nbsp;networks, phones, coaxial cables, etc. The tester is equipped with a large LCD display. This cable testing kit is built to last for years. 

 
  LCD resolution:&nbsp;144 x 64 dots. 
  Tests cables and circuits. 
  Measures the lengths of LAN and coaxial&nbsp;cables. 
  Tone generator mode. 
  Tone tracers. 
  Finds and identifies multiple LAN cables. 
 

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?