电子产品

搜罗全球顶尖电子产品公司提供的电子产品资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

电子产品供应商和制造商

Electronics

零件，组件及电器用品

elec

搜罗全球顶尖零件，组件及电器用品公司提供的零件，组件及电器用品资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

零件，组件及电器用品供应商和制造商

Parts, Components & Electrical Supplies

MDC Electronics Co.,Limited 

Bluetooth Optical Audio Receiver / Transmitter | Dual Antenna | Bluetooth 5 | 100 ft. Range 1.【5.8GHz&amp;5.2GHz Dual-band Wireless Stereo Audio Transmitter and Receiver】 Compared to the traditional 2.4GHZ, 5.8GHz&amp;5.2GHz Dual-band has a larger bandwidth, better stability and less interference. It fundamentally solves the situation of channel congestion and dropped lines.     2. 【Unique 2.4G Bluetooth 5.3 Connection】 The Transmitter &amp;Receiver can add Bluetooth functionality to your device, allowing you to enjoy wireless audio on devices that previously did not support Bluetooth. 3. 【HiFi Lossless Audio Quality &amp; 18ms Low Latency 】 The wireless audio transmitter is equipped with 192kHz/24bit high-resolution audio technology, which is clear and stable without noise, exceeding the sound quality standards of traditional CDS. The stable 5.8GHz&amp;5.2GHz dual-band wireless technology ensures that the wireless coaxial transmitter achieves ultra-low delay audio transmission of 18ms, and truly realizes audio synchronization.   4.【Plug &amp; Play with Long Distance-150ft】 Simple setup with no software installation required. Just connect with your audio sources (such as TV/PS2/PS3/DVD/MP4 and so on) to transfer audio wirelessly to speaker, subwoofer, amplifiers, soundbar, home stereo and so on.3pcs 5.8GHz&amp;5.2GHz dual-band antennas ensure higher transmission efficiency and more stable transmission, with barrier- free transmission distances of up to 50 meters (160 ft) outdoors and 30-50 meters (100-160 ft) indoors.  5.【Multiple Flexible Connection, Better Compatibility】Wireless transmitter receiver set with RCA input and output can easily connect with your TV, DVD, MP4 to transfer audio wirelessly to a powered speaker, subwoofer, amplifiers, home theater, stereo and so on. At the same time, it is also equipped with AUX IN port and 3.5mm headphone port, perfect for various appliances in the family.  6. Support mobile phones and computers to play stereo sound directly on the power amplifier device (No-bluetooth) or stereo through Bluetooth. 7. Support 24bit/192KHz which better than CD-Level audio experience.    8.RCA Input and Output &amp; AUX IN &amp; 3.5mm headphone Output Port,RCA cable can easily connect with your TV, PC, MP4, A/V reveiver to transfer audio wirelessly to a powered speaker, subwoofer, or home stereo. It is also equipped with AUX IN port and 3.5mm headphone port, perfect for various appliances in the family. 

Bluetooth Optical Audio Receiver / Transmitter | Dual Antenna | Bluetooth 5 | 100 ft. Range

5.8GHz&amp;5.2GHz Dual-Band Wireless Audio Transmitter Receiver for TV/PC, 160ft Long Range 0.018s Low Latency with built-in 2.4G Bluetooth 5.3 Receiver, Wireless Adapter Kit with RCA(3.5mm) Out/Input 1.【5.8GHz&amp;5.2GHz Dual-band Wireless Stereo Audio Transmitter and Receiver】 Compared to the traditional 2.4GHZ, 5.8GHz&amp;5.2GHz Dual-band has a larger bandwidth, better stability and less interference. It fundamentally solves the situation of channel congestion and dropped lines.     2. 【Unique 2.4G Bluetooth 5.3 Connection】 The Transmitter &amp;Receiver can add Bluetooth functionality to your device, allowing you to enjoy wireless audio on devices that previously did not support Bluetooth. 3. 【HiFi Lossless Audio Quality &amp; 18ms Low Latency 】 The wireless audio transmitter is equipped with 192kHz/24bit high-resolution audio technology, which is clear and stable without noise, exceeding the sound quality standards of traditional CDS. The stable 5.8GHz&amp;5.2GHz dual-band wireless technology ensures that the wireless coaxial transmitter achieves ultra-low delay audio transmission of 18ms, and truly realizes audio synchronization.   4.【Plug &amp; Play with Long Distance-150ft】 Simple setup with no software installation required. Just connect with your audio sources (such as TV/PS2/PS3/DVD/MP4 and so on) to transfer audio wirelessly to speaker, subwoofer, amplifiers, soundbar, home stereo and so on.3pcs 5.8GHz&amp;5.2GHz dual-band antennas ensure higher transmission efficiency and more stable transmission, with barrier- free transmission distances of up to 50 meters (160 ft) outdoors and 30-50 meters (100-160 ft) indoors.  5.【Multiple Flexible Connection, Better Compatibility】Wireless transmitter receiver set with RCA input and output can easily connect with your TV, DVD, MP4 to transfer audio wirelessly to a powered speaker, subwoofer, amplifiers, home theater, stereo and so on. At the same time, it is also equipped with AUX IN port and 3.5mm headphone port, perfect for various appliances in the family.  6. Support mobile phones and computers to play stereo sound directly on the power amplifier device (No-bluetooth) or stereo through Bluetooth. 7. Support 24bit/192KHz which better than CD-Level audio experience.    8.RCA Input and Output &amp; AUX IN &amp; 3.5mm headphone Output Port,RCA cable can easily connect with your TV, PC, MP4, A/V reveiver to transfer audio wirelessly to a powered speaker, subwoofer, or home stereo. It is also equipped with AUX IN port and 3.5mm headphone port, perfect for various appliances in the family. 

5.8GHz&5.2GHz Dual-Band Wireless Audio Transmitter Receiver for TV/PC, 160ft Long Range 0.018s Low Latency with built-in 2.4G Bluetooth 5.3 Receiver, Wireless Adapter Kit with RCA(3.5mm) Out/Input

Good Mind Industries Co., Ltd.

The Dual LNB Power Inserter is designed to power either two LNB or two Inline Amplifiers at the same time. Zinc casting housing with grounding ears provide supreme reliability. 

Dual LNB Power Inserter

The ampiffer applications for indoor advanced HFC network installations in apartment buildings, hotels, schools, hospitals ..., having high RF amplification requirements. Designed with high gain this amplifier can be mounted directly to a wall with increased heat dissipation properties and low power consumption. The amplifer uses the latest 1.22GHz GaAs Push Pull techrology versions providing supenior distortion performance and low noise figure. 

1.2 GHz MULTI-DWELLING AMPLIFIER

嘉兴凯达电子有限公司

 Features:    Wiring kit for amplifier installation.   Include 6 cables and the required accessories.   Each cable has a jacket of different colors.   Offer good protection as well as easy identification.   Long cables allow flexible usage.   With connectors on the cables.   Allow easy amplifier installation.   
Cable:    1-17ft (5.2m) 0ga clear red power cable.   1-3ft (0.9m) 0ga clear black ground cable.   1-25ft (7.6m) 12ga clear speaker cable.   1-17ft (5.2m) 18ga clear blue remote wire.   1-17ft (5.2m) clear RCA cable.   1-3ft (0.9m) split loom tube.   
Accessories:    1-gold-plated ANL fuse holder.   1-gold-plated ANL fuse, 250 amp.   2-0ga ring terminals.   4-14ga-16ga spade terminals.   1-16-22ga spade terminals.   10-cable ties.  

Amp Wiring Kit

 Features:    Wiring kit for amplifier installation.   With 6 long and flexible cables.   Each cable with jackets in different colors.   Durable jacket keep cables well protected.   Easy to identify cables with their colors.   With connectors on the cables.   Come with all the required accessories.   Ideal for a neat and professional amplifier installation.   
Cable:    1-17ft (5.2m) 0ga clear blue power cable.   1-3ft (0.9m) 0ga clear silver ground cable.   1-20ft (6.1m) 14ga clear blue speaker cable.   1-17ft (5.2m) 18ga blue remote wire.   1-17ft (5.2m) RCA cable (clear and clear blue).   1-3ft (0.9m) split loom tube.   
Accessories:    1-nickel-plated ANL fuse holder.   1-nickel-plated ANL fuse, 250 amp.   2-0ga ring terminals.   2-0ga spade terminals.   5-14ga-16ga spade terminals.   4-self-tapping screws.   1-grommet.   10-cable ties.  

Amplifier Wire Kit

Qingyuan Sertong Electronic Technology Co., Ltd

Wireless microphone (one-drag-two microphone) 

Wireless microphone (one-drag-two microphone), power amplifier and speaker, special for KTV singing. S-100

Shenzhen MicroNature Innovation Technology Co Ltd

Product Description  MP-6500 PLC Module is a fully integrated Power Line Communication (PLC) communication module with ultra-compact size, compact structure, and simple wiring. It can be widely used in various PLC instant communication applications, such as smart street lighting, smart homes, smart parking, central air conditioning, and ubiquitous power Internet of Things (IoT) terminal devices.   Features - State Grid Standard: The product specifications and pin design comply with the national power grid standards.- Three-phase Coupling: Compatible with three-phase four-wire or three-phase five-wire systems.- Stable Communication: External ultra-strong LD signal amplifier, high sensitivity, strong anti-interference capability, long transmission distance.-Rapid Networking: Fast networking in a 200-node scale and 2-level network scenario within 10 seconds.- Multiple Interfaces: Supports UART/PWM/GPIO/SPI/ADC/I2C- Applicable Products: Concentrator gateway, three-phase gateway.  The module size and interface ofMP-6500 PLC Modulecomply with the State Grid QGDW 1375.2-2019 standard.  MP-6500 PLC Module is based on the Hi3921EV100 chip, which integrates high-speed/low-speed multi-mode power line carrier communication modem and ARM Cortex-M3 processor. The Hi3921EV100 chip supports P1901.1 and supports OFDM/FSK modulation.  The onboard external Line-Driver improves the transmission signal strength to meet customers' long-distance requirements.  MP-6500 PLC Module is equipped with the LiteOS open-source operating system for the Internet of Things, providing a more open development environment and a faster, more secure operating system.             Module NameMP-6500Main ICHi3921EV100Main InterfacesPLC, UARTCommunication MethodPower line carrier communication, supports. P1901.1, supports OFDM/FSK modulation.SizeL*W*H: 92.8mm*63.8mm*26.1mmStatic Power≤0.10W (no packet transmission during networking)Operating Voltage12VDC ±3%Operating Temperature-40°C to +85°CStorage Temperature-40°C to +125°C                 Shenzhen MicroNature Innovation Technology Co., Ltd.is a national high-tech enterprise specializing in PLC-IoT smart industrial lighting solutions. The company integrates design, research and development, manufacturing, and marketing. We haveleading High Speed Power Line Communication (HPLC) technology, anopen SAAS platform,well-established smart hardware systemandabundant experiencein industrial-grade smart lighting solutions such as Municipal Road lighting, tunnel lighting, and factory lighting...   If you are interested in our products, please feel free to contact us. We look forward to hearing from you.  Thank you for watching.  

Power Line Carrier PLC Module for Smart Street Light Industrial Lighting Parking Lot Lighting MicroNature MN-L80A Module

宁波利声音响器材有限公司

Frequency response: 50-18KHz SPL Max: 123dB Power: RMS(400+100W), Program power(800+200W), Peak powder( 1600+400W) Input: XLR/TRS Combo*2, USB, Bluetooth, RCA Stereo*1 Output: XLR*1 Limiter: Software Driver: Woofer 15"*1, Tweeter 1.75"*1 Cabinet: PP Grille: Steel with black powder coat Power supply: AC100-240V 50/60Hz 

PRX-6415A38-7DSP

DongGuan AS AUDIO Co. Ltd.

Specifically to drive subwoofers efficiently, reproduce deep and impactful bass.  Excellent performance at Harmonic Distortion (THD) and signal-to-noise (S/N). 

Class-D Subwoofer Amplifier  with DSP PCBA modules

Weit Electric Appliance Co., Limited

 	 Volume control, impedance matching, from 25W to 100W Rms.  

Volume Control

 	 Outdoor volume control 	 Impedance matching optional: 100V or 70V 	 Different power available  

ODVC Volume Control

King Line Technology Co., Limited

Audio Amp with Battery Pack for PS4 	 Power on/off, Volume control and mic mute knob 	 1200mAH rechargeable batteries for up to eight hours playing 	 Protect cirucit for safety charging and usage 	 on/off button on battery pack 	 LED indicator - red for charging and green for full charged  

Audio Amp with Battery Pack

Inspower Co., Ltd.

Inspower&rsquo;s hybrid amplifiers&nbsp;are designed for communication applications. The amplifiers use LDMOS FET devices over substrate via chip on board. The input and output matching and bias circuits are integrated. The module is internally matched to 50ohms and operates directly from 28V making system integration very simple.
 
  50&Omega; RF impedance, fully integrated matching. 
  Single supply operation: nominally 28V. 
  High gain. 
  High output power. 
  No matching circuit needed. 
  ROHS compliant applications. 
  CDMA/WCDMA/LTE/GSM. 
  High power amplifier driver. 
  Repeater. 
  RRH. 
 

RF Hybrid Amplifier

Vdson Industrial Company

 	 Input: 100 to 240Vac 	 Output: +/-35V/2.0A; +/-15V/0.5A;+5V/2.0A 	 Standard: EN60065  

Amplifier Power Supply

宁波哲诚进出口有限公司

Featured is a comprehensive amp wiring kit that contains the wire and hardware necessary for amplifier installation. The set of cables includes a ground cable, an RCA cable, a speaker cable, a power cable and more. Well kept in a storage box, this set lets you install the amp system by yourself safely, efficiently, and economically.

&bull; A comprehensive set that contains the wire and hardware necessary for amplifier installation.
&bull; Well kept in a storage box.
&bull; Let users install the amp system by themselves safely, efficiently, and economically.
&bull; Include multiple cables in the kit:
&nbsp; 1) 3FT 10GA ground cable.
&nbsp; 2) 17FT RCA cable.
&nbsp; 3) 25FT speaker cable.
&nbsp; 4) 17FT 10GA power cable.

Aurum Technologies Ltd

This audio power cord features a flexible construction to fit into almost any tight space. It is constructed of PCOCC wires to deliver no-compromise performance. This power cord is a cost-effective reference-caliber power cable for use with high-current amplifiers. 	 Feature a flexible construction. 	 PCOCC and silver-plated PCOCC wires. 	 Come with Au coating. 	 Passive frequency inductance wiring network. 	 Deliver no-compromise performance. 	 Fit into almost any tight space. 	 Perfect for use with high-current amplifiers.&nbsp;  

Audio Power Cord

Core Electronics Co., Ltd.

This RF carbonyl core can be used at the maximum frequency rating of 1GHz as it has a low core loss with an excellent characteristic at high frequencies. It is applicable to computers, digital amplifiers, home appliances, heating products, mobile phones and switched-mode power supplies.&nbsp; 

 
  Effective in noise reduction. 
  Available in different sizes. 
  OEM&nbsp;order is welcome. 
 

RF Carbonyl Core

UNISONIC TECHNOLOGIES CO LTD

Power Management IC、Amplifier / Comparator IC、Analog SwitchesSpecial Application ICs

DNet Solution (HK) Company Limited

   Powered volume control switch with built-in amplifier.   Support 4 sources of audio in (4 external sources).   Support 2 speaker outputs.   Built-in amplifier with selectable power output.   Powered by 12 V DC.   One track button, single control.   Gold-tone appearance to show off a high-class touch.   Finely manufactured for style and durability.   Complete the audio system at your home, offices, and more.  

Volume Control Switch

Just-For-You Enterprise Co.,Ltd.

 This&nbsp;low-frequency transformer is designed for audio amplifiers.&nbsp;Made professionally, this&nbsp;transformer is compact and versatile. This high&nbsp;quality&nbsp;transformer is also easy to install.&nbsp; 
 
  High quality. 
  Power transformer series. 
  Widely applied to audio amplifiers. 
 

Low-Frequency Transformer

Rara Electronics Corporation

This power film resistor features a non-inductive design, which&nbsp;is suitable for high-speed SW power sources, high precision CRT and high-speed pulse handling circuits. The thin style and small package is ideal for high-density electronic instruments. It is specially designed&nbsp;with a durable heat sink mounting.
 
  Available in complete thermal flow designs. 
  Applications: color video amplifier for CRTs, emitter resistors of power SW circuits, snubber circuits, VHF amplifiers and&nbsp;load resistor for pulse generations. 
 

Power Film Resistor

Inchange Semi Co Ltd

This power transistor is one of the typical product in the power transistor series in the To-3pN package. They are used to control or amplify electric currents and electronic signals. They can be used in any arbitrary electronic appliances from radios, lamps and ballasts, phones and microphones, to amplifiers, power supplies, AV products and televisions.
    Available in transistors with different properties from collector and emitter, voltage and current  Available in transistors with different current gains, sustaining voltage and saturation voltage  Available in various standard package sizes  OEM projects are welcomed  

Power Transistors

This power transistor is one of the typical product in the power transistor series in the To-3 and TO-66 packages. They are used to control or amplify electric currents and electronic signals. They can be used in any arbitrary electronic appliances from radios, lamps and ballasts, phones and microphones, to amplifiers, power supplies, AV products and televisions.
    Available in transistors with different properties from collector and emitter, voltage and current  Available in transistors with different current gains, sustaining voltage and saturation voltage  Available in various standard package sizes  OEM projects are welcomed  

我的采购