电子产品

搜罗全球顶尖电子产品公司提供的电子产品资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

电子产品供应商和制造商

Electronics

零件，组件和原材料

elec

搜罗全球顶尖零件，组件和原材料公司提供的零件，组件和原材料资讯。您可在贸发网采购平台即时谘询可靠和专业的产品供应商，以获取详尽的资料及报价。

零件，组件和原材料供应商和制造商

Parts, Components & Raw Materials

万保刚电子集团有限公司

Claf AC/DC Power Suppliers , DC/DC Converters 

Claf AC/DC Power Suppliers

Kingtronics International Company

 	 Voltage Range 100 to 1000 Volts Current 0.8 Amperes 	 0.8 AMPS Bridge Rectifier 	 MBS Package Bridge Rectifier 	 Available with MB1S, MB2S, MB4S, MB6S, MB8S, MB10S  

Bridge Rectifiers MB1S

Shenzhen HC Technology Co., Ltd.


SIM series single-phase off-grid inverter consist of 3 functional modules: solar controller, pure sine wave inverter and insolated transformer. The controller adapts MPPT technology and intelligent battery management design which is very efficient and smart; integrated pure sine wave inverter and low frequency isolated transformer makes it with excellent overload performance, suitable for a variety of electrical appliances. It supports mains/generator input, take advantages of old diesel generators, saving initial investment and operation maintenance cost.

SIM series is mainly applied in remote animal husbandry, fishery area and big family to solve people&rsquo;s electricity problems

Features
&Oslash;MPPT controller, maximize utilization of solar panels
&Oslash;Integrated design with controller, inverter and transformer
&Oslash;Pure sine wave output
&Oslash;Output isolated transformer, safe and stable
&Oslash; Mains/diesel generator input interface (optional)
&Oslash; Excellent overload capacity
&Oslash; Suitable for all sorts of electrical appliances
&Oslash; Intelligent battery management function
&Oslash;Complete protections
&Oslash;LCD display + LED status indicator

3000w  Hybrid Solar Inverter With Mppt Charge Controller

UNISONIC TECHNOLOGIES CO LTD

Featured is a&nbsp;2A step-down switching regulator&nbsp;which includes a reference voltage source, oscillation circuit, error amplifier and internal PMOS&nbsp;with PWM.&nbsp;It can provide low-ripple power, high efficiency,&nbsp;excellent transient characteristics. An over-current protection function and a short-circuit protection function are built inside, so the operation frequency will be reduced from 300KHz to 30KHz when OCP or SCP happens.
 
  Thermal shutdown function. 
  Built-in internal SW P-channel MOS. 
  Input voltage: 3.6V to 23V. 
  Output voltage: 0.8V to Vcc. 
  Duty ratio: 0% to 100% PWM control 
  Oscillation frequency: 300KHz typ. 
 

Step-Down Switching Regulator

宝克振国际(香港)企业有限公司

 	 BKZ0130PW RCD 1 gang socket. 	 Type: latching RCD-passive RCD, double pole. 	 Rated voltage: 230V AC. 	 Rated current: 13A max. 	 Frequency: 50Hz. 	 Trip current: 30mA. 	 Break time: 40m max. 	 Voltage surge: 4K (100kHz ring wave). 	 Endurance: 3000 cycles min. 	 Hit-pot: 2000V min. 	 Approval CE BS7288, BS1363. 	 Cable capacity: 3 x 2.5mm. 	 Minimum back box depth: 35mm 	 Application equipment, household appliances, etc. 	 Latching RCD (sometimes called passive) &ndash; when the power is lost due to an earth fault, the RCD trips out and isolates the circuit it is protecting. Latching RCD&rsquo;s do not trip during power cuts so they are great for fridges and freezers and also for protecting remote/unmanned areas. 	 This would also make them ideal for protecting some heating equipment set to &ldquo;frost protection&rdquo;, fish tanks, battery charging, and the protection of remote or unmanned areas.  How RCDs work: 	 RCDs work on the principle &quot;what goes in must come out&quot;. They operate by continuously comparing the current flow in both the active (supply) and neutral (return) conductors of an electrical circuit. If the current flow becomes sufficiently unbalanced, some of the current in the active conductor is not returning through the neutral conductor and is leaking to earth.  Examples of equipment recommended to be protected by an RCD: 	 Hand held electric power tools, such as drills, saws and similar equipment. 	 Tools such as jack-hammers, electric lawn mowers. 	 Equipment on construction sites. 	 Equipment such as appliances which move while in operation, such as vacuum cleaners and floor polishers. 	 Appliances in wet areas such as kitchens, including kettles, jugs, frying pans, portable urns, food mixers/blenders. 	 Hand held appliances such as hair dryers, curling wands, electric knives, etc. 	 Cord extension leads.  

RCD 1 Gang Socket

Shenzhen Pingsheng Electronics Co., Ltd.

MB10S Mini Bridge Rectifier

宝鸡威特电子有限公司

 Contact&nbsp;  	 Contact :2C 3C 4C 	 Contact Material :AgCdO 	 Contact Resistance :100m&Omega;(1A 6VDC) 	 Contact Load（resistive load)&nbsp; 	 2C 3C:&nbsp; 7A&nbsp; 250VAC/30VDC 	 4C:&nbsp; 5A&nbsp; 250VAC/30VDC 	 Max.Switching Voltage :250VAC/30VDC 	 Max.Rated Switching Current（Resistive Load) 	 7A(2C 3C)&nbsp; 5A(4C) 	 Max.Switching Power :1750VA/210W 	 Mechanical Endurance min :2&times;107ops 	 Electrical Endurance min :1&times;105ops  

7A 2C 4C Relay DC12V DC24V

佛山市南海赛威科技技术有限公司

Features:   Secondary side Constant Voltage (CV )and Constant Current (CC) control.   Wide VCC operating range (3.3V to 36V).   Trimmed 1% internal voltage reference.   Wired or open-drain output stages.   Low external component count.   Easy frequency compensation.   Low supply current: 0.5mA.   Operating temperature range: -40 to 125.  Applications:   Battery chargers.   Adaptors.   AC/DC LED lighting.  

Constant Voltage & Constant Current Controller

Features:   Proprietary &quot;&eta;-BalanceTM&quot; to boost light load efficiency.   Proprietary &quot;zero OCP/OPP recovery gap&quot; control.   Built-in soft start function.   All pins floating protection.   Very low startup current.   High-voltage CMOS process with excellent ESD protection.   Frequency reduction and burst mode control for saving energy.   Current mode control.   Built-in frequency shuffling.   Programmable switching frequency.   Built-in synchronous slope compensation.   Cycle-by-cycle current limiting.   Built-in leading edge blanking (LEB).   Constant power limiting.   Audio noise-free operation.   VDD OVP &amp; clamp.   VDD under voltage lockout (UVLO).  Applications:   Offline AC/DC fly-back converter.   AC/DC adapters.   Open-frame SMPS.   Set-top box power supplies.   ATX standby power.  

AC/DC PWM Controller

Shenzhen eMylo Technology Co., Ltd.

 	 TRANSMITTER: 	 Operating Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 334 	 Chip Type: 1527/2264 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Group Coding 	 Battery Type:12V 27A(not included) 	 Remote Distance: 20m(Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 54x30x13mm   RECEIVER:  	 Input Voltage: AC 220V 	 Operating Frequency: 433Mhz 	 Operation Way: Inching/Momentary, Self-locking/Latched, Interlocked/Toggle 	 Coding Way: Intelligent Learning 	 Output Type: Active output 	 Max load: 1000W 	 Ambient TEMP: -20℃ -65℃, Humidity&lt;95% 	 Factory Default: Self locking 	 Board DIM: 69 x 49 x 17mm 	 Case DIM: 75 x 65 x 29mm   PACKAGE INCLUDES:  	 2 x &nbsp;Transmitters 	 1 x &nbsp;Receiver 	 1 x &nbsp;English Manual  
 THREE MODES:  	 Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off. 	 Self-lock: press the one button, the reply turns on, press the button again, the reply turns off. 	 Interlock: press the one button, the reply turns on, press the next button, the reply turns off.   Steps:  	 Clear:&nbsp;Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.   Choose the mode:  	 Inter-lock:release the button after the light flashes once. 	 Self-lock:release the button after the light flashes twice. 	 Inching:release the button after the light flashes three times.   Link the remote control:  	 Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on. 	 Press a transmitter button, and the red light will flash, at this time, it means finished linking.  

AC 220v 1000w 2 Channel Wireless Relay with Transmitter

 TRANSMITTER:  	 Operating Voltage: 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 126 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Pads 	 Battery Type: 12V 27A(not included) 	 Remote Distance: 20m (Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 54 x 30 x 13mm   RECEIVER:  	 Input Voltage: AC 220V 	 Operating Frequency: 433Mhz 	 Operation Way: Inching, Self-locking 	 Coding Way: Intelligent Learning 	 Output Type: Active output 	 Max load: 1000W 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Factory Default: Self-locking 	 Board DIM: 45 x 30.5 x 17mm 	 Case DIM: 65 x 37 x 22mm   Package Includes:  	 1 x Transmitter (Battery is not included) 	 4 x&nbsp; Receivers 	 1 x English Manual   Three modes:  	 Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off. 	 Self-lock: press the one button, the reply turns on, press the button again, the reply turns off. 	 Interlock: press the one button, the reply turns on, press the next button, the reply turns off.   Steps:  	 Clear: Press &amp; hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.   Choose the mode:  	 Inching:release the button after the light flashes once. 	 Self-lock:release the button after the light flashes twice. 	 Inter-lock:release the button after the light flashes three times.   Link the remote control:  	 Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on. 	 Press a transmitter button, and the red light will flash, at this time, it means finished linking.  

AC 220v 1000w 4 x 1 Channel RF Wireless Relay with Transmitter

TRANSMITTER 	 Operating Voltage: DV 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 4.7M 	 Chip Type: 1527/2264 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Group Coding or Bonding Pads 	 Battery Type: 2pcs 3V CR2016 Batteries(not included) 	 Remote Distance: 100m(Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 60x38x13mm  
RECEIVER 	 Input Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Coding Way: Intelligent Learning 	 Output Type: Active Output 	 Max load: 10A 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Factory Default: Self-locking 	 Board DIM: 45x30.5x17mm 	 Case DIM: 65x37x22mm  
PACKAGE INCLUDED
2X Transmitters (Battery is not included)
1X Receiver
1X English Manual

Three modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inchingmomentary:release the button after the light flashes once.
Self-lock/latched:release the button after the light flashes twice.
Inter-lock/toggle:release the button after the light flashes three times.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

DC 12V 1Channel 433Mhz RF Wireless Relay with Transmitter

TRANSMITTER 	 Operating Voltage: DC 6V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 334 	 Chip Type: EV1527 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Group Coding 	 Battery Type: 2pcs 3v 2016 button cells(not included) 	 Remote Distance: 20m(Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 60x30x12mm  
RECEIVER 	 Input Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Coding Way: Intelligent Learning 	 Output Type: Active Output 	 Max load: 10A 	 Ambient TEMP: -30℃-70℃, Humidity&lt;95% 	 Factory Default: Interlocked 	 Board DIM: 45x30.5x17mm 	 Case DIM: 65x37x22mm  
Package Includes:
2X Transmitters (Battery is not included)
1X Receiver
1X English Manual

Three modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inching/momentary:release the button after the light flashes once.
Self-lock/latched:release the button after the light flashes twice.
Inter-lock/toggle:release the button after the light flashes three times.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

DC 12V 1Channel 433Mhz Wireless Relay with Transmitter

RECEIVER 	 Input Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Operation Way: Inching, Self-locking, Interlocked 	 Coding Way: Intelligent Learning 	 Output Type: Passive Output 	 Max load: 10A 	 Ambient TEMP: -20℃ -65℃, Humidity&lt;95% 	 Factory Default: Self-locking 	 Board DIM: 69x49x17mm 	 Case DIM: 75x65x29mm  
TRANSMITTER 	 Operating Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 126 	 Chip Type: 2260 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Welding code 	 Battery Type: 12V 27A(not included) 	 Remote Distance: 20m (Theoretical value) 	 Ambient TEMP: -30℃ -70℃ , Humidity&lt;95% 	 Product DIM: 50x39x12mm  
Package Includes:
2X Transmitters (Battery is not included)
1X Receiver
1 x English manual

Two modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inching//momentary:release the button after the light flashes three times.
Self-lock/latched:release the button after the light flashes twice.
Inter-lock/toggle:release the button after the light flashes once.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

DC 12V 2Channel 433Mhz RF Wireless Relay with Transmitter

TRANSMITTER 	 Operating Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 4.7M 	 Chip Type: 2264 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Pads 	 Battery Type: 12V 23A(not included) 	 Remote Distance: 150m (Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 105x48x15mm  
RECEIVER 	 Input Voltage: AC 220V 	 Operating Frequency: 433Mhz 	 Operation Way: Inching, Self-locking 	 Coding Way: Intelligent Learning 	 Output Type: Active output 	 Max load: 1000W 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Factory Default: Self-locking 	 Board DIM: 45x30.5x17mm 	 Case DIM: 65x37x22mm  
Package Includes:
1X Transmitter (Battery is not included)
6X Receivers
1X English Manual

Three modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inching:release the button after the light flashes once.
Self-lock:release the button after the light flashes twice.
Inter-lock:release the button after the light flashes three times.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

AC 220V 1000W 6*1Channel RF Wireless Relay with Transmitter

TRANSMITTER 	 Operating Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 334 	 Chip Type: 1527 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Group Coding 	 Battery Type: 12V 27A(not included) 	 Remote Distance: 20m(Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 54x30x13mm  
RECEIVER 	 Input Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Coding Way: Intelligent Learning 	 Output Type: Active Output 	 Max load: 10A 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Factory Default: Self-locking 	 Board DIM: 45x30.5x17mm 	 Case DIM: 65x37x22mm  
PACKAGE INCLUDED 	 2X Transmitters (Battery is not included) 	 2X Receivers 	 1X English Manual  
Three modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inching/momentary:release the button after the light flashes once.
Self-lock/latched:release the button after the light flashes twice.
Inter-lock/toggle:release the button after the light flashes three times.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

DC 12V 2*1Channel 433Mhz RF Wireless Relay with Transmitter

TRANSMITTER 	 Operating Voltage: 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 126 	 Chip Type: 2260 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Bonding pad welding code 	 Battery Type: 12V 27A(not included) 	 Remote Distance: 20m (Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 85x63x12mm  
RECEIVER 	 Input Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Coding Way: Intelligent Learning 	 Output Type: Active output 	 Max load: 10A 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Factory Default: Self-locking 	 Board DIM: 45x30.5x17mm 	 Case dia: 65x37x22mm  
PACKAGE INCLUDED
1X Transmitter (Battery is not included)
4X Receivers
1X English Manual

Three modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inching/momentary:release the button after the light flashes once.
Self-lock/latched:release the button after the light flashes twice.
Inter-lock/toggle:release the button after the light flashes three times.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

DC 12V 4*1Channel 433Mhz RF Wireless Relay with Transmitter

TRANSMITTER 	 Operating Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 334 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Group Coding or Pads 	 Battery Type: 12V 27A(not included) 	 Remote Distance: 20m (Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 54x30x13mm  
RECEIVER 	 Input Voltage: AC 220V 	 Operating Frequency: 433Mhz 	 Operation Way: Inching, Self-locking, Interlocked 	 Coding Way: Intelligent Learning 	 Output Type: Active output 	 Max load: 1000W 	 Ambient TEMP: -20℃ -65℃, Humidity&lt;95% 	 Factory Default: Interlocked 	 Board DIM: 45x30.5x17mm 	 Case DIM: 65x37x22mm  
PACKAGE INCLUDED
1X Transmitter (Battery is not included)
1X Receiver
1X English Manual

Three modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inching:release the button after the light flashes once.
Self-lock:release the button after the light flashes twice.
Inter-lock:release the button after the light flashes three times.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

AC 220V 1000W 1Channel RF Wireless Relay Receiver with Transmitter

TRANSMITTER 	 Operating Voltage: DC 12V 	 Operating Frequency: 433Mhz 	 Vibration Resistance: 4.7M 	 Modulation: ASK (Stable, less interference) 	 Encode Type: Group Coding or Pads 	 Battery Type: 2pcs 3V CR2016 Batteries(not included) 	 Remote Distance: 100m(Theoretical value) 	 Ambient TEMP: -30℃ -70℃, Humidity&lt;95% 	 Product DIM: 60x38x13mm  
RECEIVER 	 Input Voltage: AC 220V 	 Operating Frequency: 433Mhz 	 Operation Way: Inching, Self-locking 	 Coding Way: Intelligent Learning 	 Output Type: Active output 	 Max load: 1000W 	 Ambient TEMP: -20℃ -65℃, Humidity&lt;95% 	 Factory Default: Self-locking 	 Board DIM: 45x30.5x17mm 	 Case DIM: 65x37x22mm  
Package Includes:
1X Transmitter (Battery is not included)
1X Receiver
1X English Manual

Three modes:
Inching: press&amp;hold one button, the reply turns on, release the button, the reply turns off.
Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
Interlock: press the one button, the reply turns on, press the next button, the reply turns off.

Steps:
Clear:
Press&amp;hold the program button on the receiver, the red light will turn on and stay on for about 5 seconds.

Choose the mode:
inching:release the button after the light flashes once.
Self-lock:release the button after the light flashes twice.
Inter-lock:release the button after the light flashes three times.

Link the remote control:
Press the program button on the receiver until the red light turns on, and then release the program button, the red light will stay on.
Press a transmitter button, and the red light will flash, at this time, it means finished linking.

AC 220v 1000w 1Channel RF Wireless Relay Receiver with Transmitter

XP Power (China) Electronics Co Limited

 	 Features: 	 Moisture, high pressure; 	 Anti &nbsp;interference ability; 	 Small size, easy to install; 	 Low temperature rise, high efficiency; 	 High &nbsp;quality raw materials, long life; 	 Excellent performance, environmental quality; 	 Cost-effective; 	 Core can choose PC40 / 44/95; 	 Careful design; 	 Advanced manufacturing process; 	 Strict quality control links 	 Technical Parameters: 	 Rated frequency: 15K120K Hz 	 Effective cross-sectional area AE: 3239mm2; 	 Inductance coefficient AL: 13001900 &plusmn; 25% (nH / N2); 	 Efficiency: ≧ 95%; 	 Operating temperature: 40 ℃ to + 155 ℃; 	 Storage temperature: 25 ℃ to + 85 ℃; 	 Storage humidity: 30 to 95% 	 Meet UL insulation system requirements: class F grade, class H level 	 Application: 	 LED drive power, switching power supply, T5 / T8 / T10 fluorescent, adapter, inverter power supply, household appliances, etc.  

EDR Type SMPS Transformer with Ferrite Core

Ningbo Lishun Relay Company Limited

Relay LS-T73 3FF

Yangzhou Yangjie Electronic Technology Co., Ltd

This is a series of rectifiers. There are 4-terminal bridge rectifiers that turns AC into DC power. There are also diode rectifiers that restricts and constricts current flow in an electronic circuit.   Available in through-hole package and surface mount SMD package  Available in rectifiers and diodes for different working environment  Available in loose pack or roll form  

Rectifier

HY ELECTRONIC (CAYMAN) LIMITED

   Bridge rectifier: cell, GPP, three phase and Schottky type.   Packages: 4-in-line, SMD, KBPC.  

Bridge Rectifier

Changzhou Zhongguang Electronic Co., Ltd

 The rectifier bridge is suitable for use in most common applications. It is professionally made to ensure reliable performance. There are various designs available for your selection. 
 
  High quality. 
  Available in MB10S, DB107, KBP, KBPC, KBL, GBJ, GBL and GBU. 
 

我的采购