雅迪勤(亚太)有限公司

 Specification of KRD Series Refrigerated Desiccant Combination Air Dryer 

1.Air capacity:1.2-6.5Nm3/min
2.Max.working pressure: 6-10bar(g)
3.Outlet air pressure dew point:-40℃-70℃
4.Cooling method: Air-Cooled
5.Inlet temperature: 0℃-45℃
6.Power Supply: 220V-380V/50-60HZ
7.Purge air: &le;3~5%

 Features of Refrigerated Desiccant Combination Air Dryer 

In order to meet with the very demanding air dryness requirement, ADEKOM has developed a series of refrigerated / desiccant combination air dryer, the benefits of purge air loss and low power consumption from refrigerated air dryer and the benefit of low pressure dew point desiccant dryer are combined to achieve super dry air with minimum energy consumption. 	 Dry air outlet at low dew point 	 Extended desiccant service life 	 Lower maintenance costs 	 Refrigeration and drying units, filters are all located at one skid for easier access 	 Advanced auto-mode control system 	 Less purge air amount is required. Since the compressed air is already dry, purge air amount can be reduced to 3%  

Refrigerated Desiccant Combination Air Dryer

 Specification of Energy Saving Two Stage Oil Electric Industry Screw Compressor 

1.Air capacity:61.00-51.50m3/min
2.Max.working pressure: 7,8,10,13bar(g)
3.Motor power: 280-315kW
4.Cooling method: Air-cooled/Water cooled available
5.Discharge pipe connection: DN125
6.Power Supply: 380V/50-60HZ

 Features of ADEKOM Two Stage Compression&nbsp;Energy Saving Oil Injected Rotary Screw Air Compressor 

 1.Low energy consumption  	 To ensure air is compressed with isobaric ratio in first stage and second stage compression and to reduce compression work and suction temperature for secondary stage compression, air discharged from first stage is cooled drastically by oil spread cooling in the coupling cavity between stages.Use two stage compression instead of one stage compression to achieve required pressure can achieve 10%~15% adiabatic efficiency and energy saving. 	 Two stage screw compression technology uses isobaric ratio principle to set the inter-stage pressure for the first and second stage compression, which not only reduces compression ratio for each stage of compression and air leakage, but also greatly improves volumetric efficiency and adiabatic efficiency. Use two stage compression to achieve required pressure can achieve 93%volumetric efficiency,improves compressor delivery capacity. While one stage compressionachievesmaximum 90%volumetric efficiency (90%). 	 Prevention of pressure loss and high energy consumption are achieved by adopting oil mist-spraying cooling method on inter-stage, this is specially designed for reducing unnecessary parts such as intercooler and associated piping. 	 Comparing with single stage compressor, two stage screw compressor do have a lot of economic advantages for long term operation.With the samerequired forcapacity, discharge pressure, two stage compression unit instead of single-stage compression unit to reduce 15%energy consumption.Similarly, under the same condition for power consumption and discharge pressure, two-stage compression can achieve more 15% capacity than the single stage compression.   2.Low maintenance costs  	 The compression ratio of each stage is reduced by using two stage compression technology, axial and radial forces exerted on rotors are greatly relieved, which improve the service life of the rotors and bearings dramatically. 	 Special designed oil mist-spraying cooling method on inter-stage avoids unnecessary parts (e.g. intercooler and piping), and reduces associated maintenance cost.  

Energy Saving Two Stage Oil Electric Industry Screw Compressor

 Specification of ADEKOM KAD Series Refrigerated Air Dryer 

1.Air capacity: 9.5,11.5,14 Nm3/min
2.Max.working pressure: 6-13bar(g)
3.Nominal Power: 2-3HP
4.Cooling method: Air-Cooled
5.Refrigerant: R22,R134A,R407C,R410A
6.Power Supply: 220V-380V/50-60HZ
7.Pressure dew point:3-10℃

 Features of Industrial Electric Refrigeration Air Cooling Dryer  	 KAD+ series refrigerated air dryer is designed to remove this moisture before it reaches your air system. Dry compressed air is one of the key factors to keep pneumatic system and production line trouble free. And KAD+ air dryers are there to meet with this need   Air Circuit  	 The compressed air flows from Air inlet into Pre-cooler for preliminary cooling, then passes through Evaporator for further cooling, the compressed air after refrigeration enters Moisture separator, the condensed water is separated and removed out via autodrain. The dried cool air is returned back to heat exchanger for gaining temperature, and then comes out the dryer through Air outlet.   Refrigerant circuit  	 The refrigerant after passing through Refrigerant compressor becomes liquid form in high temperature and high pressure, this liquid form refrigerant flow through Condenser to cool down and then passes through Desiccant filter for removing particulates. Refrigerant after passing through Capillary becomes low temperature low pressure vapour form then enters Evaporator to conduct heat exchange with incoming hot compressed air. After refrigeration process, the refrigerant returns back to Refrigerant compressor for the next cycle.   Installation and maintenance  	 All KAD+ refrigerated air dryers do not require special foundation. 	 Immediate start-up after connection of inlet and outlet pipes and power supply cable.  

Industrial Electric Refrigeration Air Cooling Dryer

JMC Products

This product is a high performance cooling&nbsp;fan for computers and other small electronic products. Its&nbsp;dual counter-rotating&nbsp;impeller design allows for&nbsp;maximum air flow through the system and is ideal for system environment where&nbsp;hugh amount&nbsp;heat dissipation is needed, such as rack mount servers and telecommunication systems.   Size: 40 x 40 x 56 mm   Operating voltage : 10.8 - 12.6 Vdc   Speed: 11,000~20,000rpm   Air flow:19.4 ~ 40 CFM   Pressure: 0.9 ~ 3.4 in H2O   Available with PWM signal   Ball bearings  

40x56mm Counter Rotating fan

This product is a&nbsp;high performance DC blower for computers and other small electronic devices. It&nbsp;moves&nbsp;air within the system&nbsp;to the direction&nbsp;needed for heat dissipation. It is most suited for system which needs to dissipate large amount of heat in&nbsp;enclosure's particular&nbsp;air exit.   Size:&nbsp;97 x&nbsp;94 x&nbsp;33 mm   Operating voltage : 10.8 - 13.2 Vdc   Speed: 2,400~4,800 rpm   Air flow:18 ~&nbsp;35 CFM   Pressure: 0.5 ~&nbsp;2.7 in H2O   Available with PWM signal   Ball bearings   Also available in 24V &amp; 48V  

97x33 Blower

Guangzhou Debo Machinery Mfg Co., Ltd

&bull; Model no: DB-FM650
&bull; Hot and cold laminator


Technical Parameters
&bull; Max. laminating width: 635mm
&bull; Max. laminating thickness: 5mm
&bull; Max. Laminating Speed: 1600mm/min
&bull; Max. distance between upper and lower rollers: 7mm
&bull; Display: LCD
&bull; Dimension: 910x520x310mm (excluding stand)
&bull; Net weight: 38.00 kg
&nbsp;

Hot and Cold Laminator

Eunsung Chemical Co., Ltd.

This ERV system improves the air quality of offices and apartments. The system brings fresh outdoor air into the building and exhaust gas out of the building. Its heat exchanging mechanism recovers the heat loss&nbsp;of the room during the ventilation processes.

 
  Energy recovery ventilator (ERV). 
  Usually used in apartments, offices, etc. 
  A mechanical ventilation system that improves indoor air quality. 
  Supplies fresh outdoor air to the inside of a building. 
  Passes polluted indoor air to the outside of a building. 
  The heat exchange process can recover heat loss. 
  Energy can be saved by heat exchange to recover wasted heat energy. 
  Ventilation is the most effective way to get rid of carbon dioxide, odors and other chemicals substances. 
  Chemicals such as volatile organic compounds and formaldehyde are often found in the interior materials of buildings. 
  Korean industrial standard: air flow: 250CMH; heat exchanging efficiency (%, heating/cooling): 76/61; power consumption: 100W. 
 

Energy Recovery Ventilator

江苏贝斯特电器有限公司

 Displayed is a 24L cooler and warmer in blue, white and purple. It is equipped with an ergonomic handle and a control panel on the top for ease of use. This sturdy cooler and warmer promises long time service. 
 
  18℃-25℃ cooling capacity. 
  50℃-60℃ heating capacity. 
 

Cooler and Warmer

爱尔国际有限公司

Industrial Air Cooler

Shanghai Runtong Int'l Trade Co Ltd

   Diameter: 1270, 1110, 950 and 790mm.   Speed: 450 r/min.   Air flow: 29000, 32000, 37000 and 44500 m3/h.   Noise: 56, 60, 63 and 65 dB.   Power: 0.37, 0.55, 0.75 and 1.1kW.   Voltage: 380V.   Weight: 43.5, 55, 65 and 85kg.   Overall measurement: 900 x 900 x 400, 1060 x 1060 x 400, 1220 x 1220 x 400, 1385 x 1380 x 400.   Our square suction fan and water curtain cooling equipment is known as the new generation of cooling ventilation, it can prevent dust, remove the air smell and improve the air quality with a good performance.   The cooling fans we produce are widely used in industrial workshops, civil fields &amp; agricultural fields, such as warehouse, stores, supermarkets, large farms, livestock farms, gardening and flower/vegetable greenhouses.   Our products enjoy high reputation at home &amp; abroad and sell well in China, Southeastern Asia, Africa, Mid east, Europe and USA.  

Industrial Fan

Dongguan Yuanyao Electronics Technology Co., Ltd.

The&nbsp;high temperature hot air ageing oven comes in the shape of a cuboid. Featuring a double wall construction, this high temperature hot air ageing&nbsp;oven&nbsp;is safe&nbsp;to&nbsp;use. It is designed to&nbsp;meet the challenging&nbsp;demands of various scientists and for research applications. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
   Internal size: 1200(W) x 800(H) x 1000(D)mm.   Exterior size: 1545(W) x 1760(H) x 1050(D)mm.   Temperature range of room ambient+10℃ - +250℃ (adjustable).   Temperature fluctuation: +/- 0.3℃.   Temperature uniformity: +/- 1℃.   Material of interior: SUS#304 stainless steel.   Materials of exterior: well painted cold rolled steel.  

High Temperature Hot Air Ageing Oven

Pelko Motors Inc

 This fan is professionally engineered for high cooling performance. It provides high airflow in your devices for a stable operation. It makes an exceptional accessory with great utility. 
 
  Voltage: 24V DC. 
  Power: 50.4W. 
  Airflow CW/CCW: 393.7 CFM. 
  Speed CW/CCW: 4,900 RPM. 
  Noise CW/CCW: 67.7dBA. 
 

Cooling Fan

   Voltage: 220 and 380V.   Frequency: 50Hz.   Current: 0.20~0.45A.   Input power: 53~110W.   Speed: 1450~14500r/min.   Capacitor: 3uF.   Net: 2.4kg.   Noise: 65dBA.   Air volume: 150~256 m3/h.  

AC Forward Fan

深圳广之超货架实业发展有限公司

   We design and make the shelves according to client require  

cooling fan

FIRST CHANCE ENT CO LTD

  - As shown is a fan heater.  - 2 colours are available.  - Easy to operate  - 2 intensity options  - With a remote control  - Stylish design  

Ceramic Fan Heater

shenzhen guonengjinli science and technology co,.ltd

120mm bracket cooling fan 120*120*25mm
ballbearing/sleeve 18v 1800-2200RPM 75-90CFM 0.14-0.20inch-H2O 29-33dBA by impedance,FG CE ROHS 5mA max at 1500VAC for 1 min between lead wire and frame 100M ohm between lead wire and frame(DC 500V) 70000hrs min at 40 degree C/L10 relative humidity 65%+/-20% &gt;40000hrs min at 40 degree C/L10 relative humidity 65%+/-20% -10~80 degree C(+14~176 degree F) -40~75 degree C(-40~167 degree F) Motor protection and polarity protection UL1571 AWG26,28; UL1007 AWG26,28; UL1061 AWG30 Black PBT (UL94V-0) glass filled PBT guonengjinli.com

Dc Bracket Fan (12025-39s(B)05h) 5v 12v Ever Grand Card Vga Cooler Cooling

Guangzhou 3HZ-SOLAR Technology Co.,Ltd.

This solar attic fan&nbsp;is suitable for use in ventilation, air change and removing moisture in workshop, storage space&nbsp;and all kinds of attics and roofs. It features an eco-friendly solar power source that serves to save your costs. The DC low voltage operation makes this product safe and reliable.

 
  Automatically adjust the strength of air according to sunlight: the stronger the sunlight, the greater the air, max to 750m 3 /h. 
  Intelligence temperature control without manual operation: start when temperature above 25&deg;C and stop working under 23&deg;C. 
  High-quality solar panel has resistance to high pressure and good impact, stable performance and long service life. 
  Enclosed shell design and the materials with UV ingredients&nbsp;to resist weathering.&nbsp; 
  Multiple protective measures: waterproof, insect prevention and rat proof. 
 

Solar Attic Fan

P & N Technology (Xiamen) Co., Ltd.

Parameter: Current:3.7A &nbsp;Volatge:24v &nbsp;fan position:hot side
COP:1.8kg &nbsp;Weight:1.8kg&nbsp;
Features:
1. Higher cooling efficiency and longer working time.
2. Top quality &amp; competitive price.
3. Eco-friendly.
4. Small size&amp;easy to operate.
5. All products are RoHS and reach compliant.
6. SGS ISO9001 verified.
7. Customizable.

Thermoelectric Cooler

Shenzhen Ambeyond Technology Co., Ltd.

&nbsp;1.Rated Voltage :110/115/220/230/380V
&nbsp;2.Diamete:200x200x60mm
3.Current :0.16-0.25A
4.Speed:2500RPM
5.Max Air Flow :60CFM
6.Bearing Type:Double Ball Bearing
7.Packing:10Pcs/Ctn
8.Certification:CE ROHS FCC UL
9.Sample lead time:3-5 days
&nbsp;&nbsp; Delivery lead time: 7-15days

Good Quality AC Ventilation Fan 220X60mm

YoungModeler

This is an Netherlands windmill model. The windmill is a machine, driven by the wind force. It has a wheel equipment with multiple blade fan on top of the tower. The fan rotates in perpendicular direction of the wind.    Traditionally for hydra-power  Ideal gift for model loveres  

Windmill Model

慈溪市沣锐电器有限公司

2000w heavy duty fan heaterceramic heating elementoff/fan/1000w/2000wover heat protectionindicator lightthermostat control

2000W Workshop Fan Heater

Shanghai Oupasi Electric Appliances Co Ltd

The industrial fan heater is easy to be moved thanks to its portable design. It is completed with a dual protection function to prevent overheating. With a waterproof construction, this piece can be used safely in damp and wet areas.
 
  Power: 12-22kW. 
  Stainless steel heating element. 
  Built-in thermostat and regulator power. 
  IP rating: IP44. 
  Insulating plastic handle. 
  Anti-rust metal casing. 
  400V heater will relay. 
  Application: garages, workshops, building sites, etc. 
  Low-noise operation. 
  Tip-over switch. 
 

Industrial Fan Heater

Displayed is a portable industrial fan heater that employs the stainless steel heating element. This piece is engineered to offer dual protection against overheating. This piece can be applied in garages, workshops as well as building sites.
 
  Low-noise operation. 
  IP rating: IP44. 
  Can be used in damp and wet areas. 
  Insulating plastic handles. 
  Anti-rust metal casing. 
  Built-in thermostat and regulator power. 
 

This industrial fan heater is constructed with quality materials to attain high reliability. The power of it can be decided by customers. This heater can be applied in&nbsp;factories as well as workshops.
 
  Power: 2,000kW,&nbsp;3,000kW,&nbsp;5,000kW,&nbsp;9,000kW. 
  Available in other designs. 
 

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?