美富国际(实业)有限公司

NdFeB magnet white PTFE (Teflon) coating.The Teflon coating with option of white, grey white, black and grey. Sintered neodymium (NdFeB) magnet.Available from N30 to N54, N30H to N40H, N30SH, N35SH and so on.Durable metallic structure.Superior magnetic property.Versatile and practical.Suitable for application for high performance, miniaturization and less energy consumption.Also suitable for stationery and toy use.Widely used in aerospace, aircrafts, automobiles, electronics and so on.Available in various shapes.

NdFeB Magnet with Teflon Coating

NdFeB (Neodymium-Iron-Boron) magnet is used most popular by people in the industry and our daily life, because it has superior magnetic properties than other kinds of magnetsThe outstanding characteristics are as follows Higher unit magnetic properties than other magnet and assure you of smaller size and lighter weight in designing devicesBeing mostly an iron-based alloy, NdFeB type rare earth magnet is much more prone to surface oxidation or rust. To eliminate such a problem, the user should consider magnet coating, plating, or suitable surface treatmentBeing less prone to chipping during handingLower temperature coefficient of magnetic properties than ceramic but higher than SmCo type rare earth magnetTherefore, this NdFeB type rare earth magnet will suffer irreversible loss at high temperatureThe permanent magnets, which are called the next centurial magnets, are used in a wide range of industries including computers, automobiles, electric machinery, electro-sound devices, automatic control, magnetic force mechanism, microwave communication, petrochemical industry, medical apparatus, and equipment.The magnets are the ideal materials for the subminiature magnetic devices with high function.NdFeB magnets is especially suitable for developing those new products demanding high quality, small volume and light weight.

NdFeB Magnet

 	 Ferrite(Ceramic) Magnet is manufactured from oxide materials using powder metallurgical process. Ceramic magnet is most widely used because of its low cost, high-energy, good electric insulation and excellent resistance to demagnetization. 	 The most common type of ceramic magnets are anisotropic strontium, anisotropic barium and isotropic barium magnet. 	 Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process. 	 The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet designers. 	 When designing the ferrite magnets for a particular application, primary consideration should be given to its shape limitation due to the powder metallurgical manufacturing process and the temperature dependence of ferrite materials. 	 Ferrite Magnets has good anti-corrosion performance, no surface treatment needed. There are two manufacturing process for ferrite magnets: 	 Dry Process &amp; Wet Process. By dry process, can produce isotropic &amp; anisotropic magnets; by wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation. 	 For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher. 	 At present, we have put our emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications.  

Ferrite Magnet

 	 Plastic and rubber magnets are made of bonded ferrite magnet powder and other materials. 	 Anisotropic and isotropic rubber magnet available. 	 Thickness of rubber magnet is available in maximum 0.15mm. 	 Width of rubber magnet is available in maximum 800 mm. 	 Solid colored surface. 	 Soft and flexible texture. 	 Strong magnetism. 	 Rubber magnets are available in different shapes such as strip, coil, sheet, and other shapes. 	 Widely used in micro-motor, fridge, disinfecting cupboard, toy, stationery, print and so on. 	 Various colors are available.  

Rubber Magnet

 	 In shape of round, rectangular or regular magnet shape. 	 Magnets are suitable for use in instrument, meter, micro-motor, etc. 	 They can also be used in electro-acoustic device, microwave device and magnetic drive unit. 	 Different shapes, sizes and colors are available.  

Magnet

 	 Artificial rubber mixed with iron powder. 	 No magnetism. 	 Can be attracted by magnets. 	 Good for sealing the magnetism of magnets. 	 Rectangular shaped sheets. 	 Solid colored surface. 	 Soft and flexible structure. 	 Can be used for magnetic dart boards or any other toys and stationery.  

Iron Rubber Sheet

Ferrite (Ceramic) Magnet is manufactured from oxide materials using powder metallurgical process. Ceramic magnet is most widely used because of its low cost, high-energy, good electric insulation and excellent resistance to demagnetization.
&nbsp;
The most common type of ceramic magnets are anisotropic strontium, anisotropic barium and isotropic barium magnet.
&nbsp;
Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process.
&nbsp;
The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet designers.
&nbsp;
When designing the ferrite magnets for a particular application, primary consideration should be given to its shape limitation due to the powder metallurgical manufacturing process and the temperature dependence of ferrite materials.
&nbsp;
Ferrite Magnets has good anti-corrosion performance, no surface treatment needed. There are two manufacturing process for ferrite magnets:
Dry Process &amp; Wet Process. By dry process, can produce isotropic &amp; anisotropic magnets; by wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.
&nbsp;
For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher.
&nbsp;
At present, we have put our emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications.

 	 Ferrite (Ceramic) Magnet is manufactured from oxide materials using powder metallurgical process. Ceramic magnet is most widely used because of its low cost, high-energy, good electric insulation and excellent resistance to demagnetization. 	 The most common type of ceramic magnets are anisotropic strontium, anisotropic barium and isotropic barium magnet. 	 Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process. 	 The feature of low recoil permeability, along with the high coercive force, makes them highly resistant to demagnetizing fields. In addition, their relatively low specific density and economical cost are also very attractive to the magnet designers. 	 When designing the ferrite magnets for a particular application, primary consideration should be given to its shape limitation due to the powder metallurgical manufacturing process and the temperature dependence of ferrite materials. 	 Ferrite Magnets has good anti-corrosion performance, no surface treatment needed. There are two manufacturing process for ferrite magnets: 	 Dry Process &amp; Wet Process. By dry process, can produce isotropic &amp; anisotropic magnets; by wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation. 	 For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher. 	 At present, we have put our emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications.  

 SmCo magnets  	 Samarium Cobalt holds its standard property in higher maximum temperatures than neodymium, although its maximum strength is less. The cost of SmCo material is the most expensive, so SmCo is recommended only when its performance is a high-temperature environment is a concern.   Characteristics &amp; application of SmCo permanent magnet : 	 SmCo permanent magnet has a high magnetic energy product and high coercive force. Its properties are better than Alnico, ferrite permanent magnet. Its max. the energy product is up to 239kJ/m3(30MGOe), which is three times of that of Alnico8 permanent magnet, eight times of that of ferrite permanent magnet (Y40). 	 So the permanent magnetic component made from SmCo material is small, light and stable in the property. 	 It is widely applied to electro acoustic&amp; telecommunication apparatus, electric motors, measure meters, peg-top, electronic watch, microwave apparatus, magnetic mechanism, sensor and other static or dynamic magnetic routes. 	 The curie temp. of the SmCo permanent magnet is high and its temp. Coeff. is low. So it is suitable for use at 300, high temp. 	 SmCo permanent magnet is heard and bristle. Its rigidity strength, tensile strength and press strength are low. So it is not suitable for the framework. The main ingredient of SmCo permanent magnet is metal cobalt(Co&ge;Y99.95%). So its price is high.  

Sm-Co Magnet

大华金属制作有限公司

Suitable for both residential and commercial applications, this masterfully crafted post boxes offer a safe and reliable solution for storing the incoming mails. Each section is printed with precise and legible details for easy readability. Made of high-quality material, this wall-mounted letter box is sturdy enough to withstand day-to-day wear and tear. 	 Wall-mounted letter box. 	 Sturdy and wear-resistant construction. 	 Printed with precise and legible details. 	 Offer a safe and reliable storage for the incoming mails. 	 Suitable for both residential and commercial applications. 	 Color: Mirror hairline.  

Stainless Steel Letter Box Paint

朗怡国际有限公司

Features: 	 No need to carry the key of it , your finger is the key. 	 Super long stand by time. charge it full for one time, it can stand by for half of a year . 	 Full charge only take 2 hours. 	 Waterproof 	 Size: 3.1*1.8*0.5 in  

Smart Fingerprint Lock

Letter Box

美裕宣传制作有限公司

Multifunction Gadgets - Twist 8 Tools in a twist designMade of durable hardened martensitic stainless steel 420Wire cutterBike Spoke wrenchSpanners 5.5 / 7 / 8 / 12Key ChainBottle opener - Carabiner hookPhillips screwdriver - Flat screwdriverRuler

Twist Multifunction Gadgets

Stainless Steel Letter Box Single 1

Stainless Steel Letter Box Ti-Gold

联合育儿(中国)有限公司

   Plastic injection moulding or tooling, Products Design, 3D CAD &amp; CAM Drawing, OEM &amp; ODM is welcome   Product Design   Our CAD &amp; CAM office had installed with the latest computer   design software such as 'Pro-Engineer', 'Plastic Advisor' and 'CATIA'   With aimed of these programme we can simply input   the 3D geometric (dimensions) of the designed product   Then we can perform the virtual fits, colour match and assembly   simulation of each product component Also, we can saving much time   in making prototype muck up and simplifier our mold making.   Capacity and type of plastic injection mould &amp; tooling making:   Video &amp; Audio Cassette Housing &amp; Parts   Fully Automatic screw Moulds (i.e. Bottle Cap)   Multi-cavity Hot runner Moulds   Electrical Appliances &amp; Household Products   Precision Gears  

Plastic injection moulding or tooling

   Customer design or OEM mold and project is welcome;   Product Design   Our CAD &amp; CAM office had installed with the latest computer   design software such as 'Pro-Engineer', 'Plastic Advisor' and 'CATIA'   With aimed of these programme we can simply input   the 3D geometric (dimensions) of the designed product   Then we can perform the virtual fits, colour match and assembly   simulation of each product component Also, we can saving much time   in making prototype muck up and simplifier our mold making.   Capacity and type of plastic injection mould &amp; tooling making:   Video &amp; Audio Cassette Housing &amp; Parts   Fully Automatic screw Moulds (i.e. Bottle Cap)   Multi-cavity Hot runner Moulds   Electrical Appliances &amp; Household Products   Precision Gears  

Aitken, Vanson & Company, Limited

 	 Description: 600DX600D 100% polyester with coating 	 Colour: black 	 Packing: export carton 	 Gender: Unisex  

Tools Bag

长城铁盒制品厂有限公司

   Material: tinplate.   Can printing it according to the customer's requirements.   Can emboss or deboss customer's logo.   Finished: shiny or matte.   Finished: shiny or matte.   The MSDS for ink inside paint and outside and tinplate.   ISO 9001:2000 factory approved.   FDA approved, EN 71 and RoHS standard.  

Tin Signal

We specializes in supplying packaging tin box of various shapes, such as heart shape tins, round tins, tin pails, rectangular tins and square tins etc. Our tin boxes are perfect for all occasions turn them into Christmas tins, chocolate tins, candy tins, cookie tins, food packaging, book tins, cigarette tins, lunch box, saving box, mint boxes, etc.
   Material: tinplate.   Without the hinge.   Can printing it according to the customer's requirements.   Can emboss or deboss customer's logo.   Finished: shiny/matte/crackle.   Certificates: SGS/ISO/FDA/RoHS/EN 71.  

 	 Material: 0.21-0.23mm thickness of first grade tinplate. 	 Size: can be designed for customer&rsquo;s design. 	 Printing: CMYK offset printing, embossed, debussed, etc. 	 Protective: coating outside, silver or golden lacquer, shinny or matt finish. 	 Usage: tin plate. 	 Durable and long lasting use. 	 Customer&#39;s logo and design are acceptable. 	 Advantages: good price, excellent quality and prompt delivery. 	 Certificate: FDA approved, EN 71 and ROHS standard. 	 4C offset printing colors.  

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?