漳州市东方智慧型仪器表有限公司

Featured here is a digital multimeter that combines five measurements in one unit. It comes with the ability to measure the voltage, current and resistance. This versatile multimeter is great for troubleshooting for a wide array of industrial or household devices.   Voltage: 400V.   Frequency: 10Hz.   Certification: CE, GS, CCC, UL.  

Digital Multimeter

 This tester can measure grounding resistance and AC voltage up to 200V. 2mA current test signal permits grounding resistance tests without tripping current breakers in the circuit under test. It can be used in the grounding resistance measurements of power system, electrical device, lightning protection device, etc. It is easy to use and has a high precision.
SAFETY INFORMATION
This tester has been designed according to IEC-61010 concerning electronic measuring instruments with a measurement category (CAT III 200V). 

Multimeters

 This analog meter is a rectifier type,permanent-magnet moving coil instrument for measurements of DC voltage,AC voltage,DC current,resistance,battery and decibels.
The meter is to operate at an ambient temperature from 0&Omega; to 50&Omega; with a relative humidity of less than 85%. 

Analog Multimeter

The featured digital multimeter comes with voltage, current, ohm, diode and continuity testing function. It has a digital display on the side and is equipped with two probes in black and red. This pocket sized multimeter flaunts a high portability and is convenient to use. 	 Pocket size digital multimeter. 	 With voltage, current, ohm, diode and continuity testing function. 	 Digital display on the side. 	 Equipped with two probes in black and red. 	 Rectangular shaped case. 	 High portability. 	 Convenient to use.  

 	 Feature:  LCD display, Max.displayed value: 6000(frequency: 9999)
Measures the true-rms values of AC voltage and AC current
Transfers the measurement readings of the meter to a computer through standard USB port
Data-hold mode
Analog bar graph(61 segments), reading unit indication and backlight
Automatic polarity indication
Low power consumption&nbsp;
The sampling rate is about 3 times/sec&nbsp;
Overrange indication&nbsp;
Manual range mode and autorange mode
Automatic/manual power-off
Relative value measurement
Max./Min. measurement
Overload protection,
Provides low battery indication
UL&amp;GS marking&nbsp; 	 &nbsp;CAT III 1000V,2 Fuse Protection&nbsp;  Fuse Protection for &quot;&mu;A/mA&quot; Jack Inputs:
630mA,690V,FAST,Min.Interrupt Rating 20000A
Fuse Protection for &quot;10A&quot; Jack Inputs:
10A,690V,FAST,Min.Interrupt Rating 20000A 	 Power Supply:9V(6F22)*1PC 	 Weight:Approx.380g(Including battery and the holster)&nbsp; 	 Specification:  Voltage DC:600m/6/60/600V
Voltage AC:6/60/600V
Current DC:600&mu;/6000&mu;/60m/600m/6/10A
Current AC:600&mu;/6000&mu;/60m/600m/6/10A
Resistance:600/6K/60K/600K/6M/60M&Omega;
Capacitance:40n/400n/4&mu;/40&mu;/400&mu;/4000&mu;F
Frequency:9.999~9.99MHz
Duty Cycle:5％~95%
Continuity:Less than 20&Omega;,more than 150&Omega;
Diode Check:approx.3.0V

True RMS Multimeter

 	 Temperature-Humidity Sensor:This sensor can be mounted on the left side of the meter or extended for measurements in other locations. 	 Holder:If you want to mount the instrument on wall,you can remove this holder from the instrument.  Specification&nbsp; 	 Temperature: -10~60℃/14~140℉ 	 Humidity:20％~95％,Resolution:1％ 	 New Point:-29~59℃/-20.2~138.2℉ 	 Power Supply:1.5V(AAA)battery*2pcs&nbsp; 	 Weight:Approx.135g（Without battery） 	 Humidity alarm  

Digital thermo-hygrometer

标准仪器有限公司

 	 High power rear flashlight Green LED means power on. Low battery self test &amp; Auto power off IR67 Water proof &amp; 2MM drop-proof  

Non-Contact AC Voltage Detector

龙程实业(香港)有限公司

Our product lines have been certified by international standards. With accords to the latest EN 61010, EN 61326 standard have been certified by SGS and with TUV certificate.

Featured here is&nbsp;a high-quality handheld digital multimeter suitable for multiple testing purposes. Its high accuracy and easy operation make it an ideal choice for you. This reliable multimeter is also available in various models. 	 6000 counts LCD display 	 Auto range &amp; manual range 	 DC / AC voltage 	 DC / AC current 	 Resistance 	 Diode test 	 Audible continuity test 	 Capacitance 	 Frequency 	 Temperature 	 Duty cycle 	 Relative measurement 	 Back light 	 True RMS 	 Auto power off 	 Low battery indication 	 Overload protection  

Multimeter

美特(中国)有限公司

  Introduction :   	 MS-WDMMD20 is an external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement. 	 One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external wireless modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.    Key Specifications/Special Features :   	 True RMS 	 6000 counts (3-3/4 digit) 	 Auto/manual range 	 Large LCD display with backlight 	 Auto / Manual &lsquo;V&rsquo; (AC / DC) (600V / 1000V) 	 Auto/manual resistor measurement : 0 - 60M&Omega; (approx.) 	 Continuity check : &lt;50&Omega; Beep buzzer sounds 	 Capacitance : 10nF - 100mF 	 Diode check : 3.0 V 	 Input impedance 10M&Omega; 	 &lsquo;NCV&rsquo; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V 	 &lsquo;SPT&rsquo; Single Probe Test AC Voltage (Audible and Visible) &gt; 100V 	 &lsquo;NCF&rsquo; Non-Contact Frequency Detection 	 Freeze / Hold reading 	 Auto-power off (APO) : 5 mins approx. 	 Relative reading (Rel) 	 Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%) 	 Max. / Min. / Max. - Min. display 	 L&omicron;w battery indication (2.6V approx.) 	 Fused test leads tted with replaceable 600mA (&Oslash;6x32mm) fast blow fuse (included) 	 Standalone mode : without external wireless module 	 Wireless connectivity transmit data&nbsp;to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately) 	 Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately) 	 Battery powered : 1 x 9V (6F22 / 6LR61 / 1604) 	 Dimension (LxWxD) mm : 179x94x54 	 Weight (approx.) grams : 330 (without battery)&nbsp;  

Wireless Connectivity Digital Multimeter Detector with Auto Measurement

  Introduction :   	 This is an external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement. 	 One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external wireless modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.    Key Specifications/Special Features:   	 True RMS 	 6000 counts (3-3/4 digit) 	 Auto/manual range 	 Large LCD display with backlight 	 Auto / Manual &lsquo;V&rsquo; (AC / DC) (600V / 1000V) 	 &#39;&mu;A / mA / 10A (AC / DC) 	 Auto/manual resistor measurement : 0 - 60M&Omega; (approx.) 	 Continuity check : &lt;50&Omega; Beep buzzer sounds 	 Capacitance : 10nF - 100mF 	 Diode check : 3.0 V 	 Input impedance 10M&Omega; 	 &lsquo;NCV&rsquo; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V 	 &lsquo;SPT&rsquo; Single Probe Test AC Voltage (Audible and Visible) &gt; 100V 	 &lsquo;NCF&rsquo; Non-Contact Frequency Detection 	 Freeze / Hold reading 	 Auto-power off (APO) : 5 mins approx. 	 Relative reading (Rel) 	 Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%) 	 Max. / Min. / Max. - Min. display 	 L&omicron;w battery indication (2.6V approx.) 	 Fused test leads tted with replaceable 600mA (&Oslash;6x32mm) and 10A (&Oslash;10x38mm) fast blow fuse (included) 	 Standalone mode : without external wireless module. 	 Wireless connectivity transmit data&nbsp;to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately) 	 Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately) 	 Battery powered : 1 x 9V (6F22 / 6LR61 / 1604) 	 Dimension (LxWxD) mm : 179x94x54 	 Weight (approx.) grams : 340 (without battery)&nbsp;  

Wireless Connectivity Digital Multimeter Detector with FREE APPS

  Introduction :  

This is a external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement.

One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.

  Key Specifications/Special Features :  

- True RMS
- 6000 counts (3-3/4 digit)
- Auto/manual range
- Large LCD display with backlight
- Auto / Manual &lsquo;V&rsquo; (AC / DC) (600V / 1000V)
- Auto/manual resistor measurement : 0 - 60M&Omega; (approx.)
- Continuity check : &lt;50&Omega; Beep buzzer sounds
- Capacitance : 10nF - 100mF
- Diode check : 3.0 V
- Input impedance 10M&Omega;
- &lsquo;NCV&rsquo; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V
- &lsquo;SPT&rsquo; Single Probe Test AC Voltage (Audible and Visible) &gt; 100V
- &lsquo;NCF&rsquo; Non-Contact Frequency Detection
- Freeze / Hold reading
- Auto-power off (APO) : 5 mins approx.
- Relative reading (Rel)
- Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%)
- Max. / Min. / Max. - Min. display
- L&omicron;w battery indication (2.6V approx.)
- Fitted with replaceable 600mA (&Oslash;6x32mm) fast blow fuse
- Standalone mode : without external wireless module
- Wireless connectivity transmit data&nbsp;to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately)
- Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately)
- Battery powered : 1 x 9V (6F22 / 6LR61 / 1604)
- Dimension (LxWxD) mm : 188x96x58
- Weight (approx.) grams : 395 (without battery)&nbsp;

Wireless Connectivity Digital Multimeter Detector (DMMD)

  Introduction :   	 This is an external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement. 	 One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.    Key Specifications/Special Features :   	 True RMS 	 6000 counts (3-3/4 digit) 	 Auto/manual range 	 Large LCD display with backlight 	 Auto / Manual &lsquo;V&rsquo; (AC / DC) (600V / 1000V) 	 &#39;&mu;A / mA / 10A (AC / DC) 	 Auto/manual resistor measurement : 0 - 60M&Omega; (approx.) 	 Continuity check : &lt;50&Omega; Beep buzzer sounds 	 Capacitance : 10nF - 100mF 	 Diode check : 3.0 V 	 Input impedance 10M&Omega; 	 &#39;NCV&#39; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V 	 &#39;SPT&#39; Single Probe Test AC Voltage (Audible and Visible) &gt; 100V 	 &#39;NCF&#39; Non-Contact Frequency Detection 	 Freeze / Hold reading 	 Auto-power off (APO) : 5 mins approx. 	 Relative reading (Rel) 	 Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%) 	 Max. / Min. / Max. - Min. display 	 L&omicron;w battery indication (2.6V approx.) 	 Fitted with replaceable 600mA (&Oslash;6x32mm) and 10A (&Oslash;10x38mm) fast blow fuse 	 Standalone mode : without external wireless module 	 Wireless connectivity transmit data&nbsp;to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately) 	 Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately) 	 Battery powered : 1 x 9V (6F22 / 6LR61 / 1604) 	 Dimension (LxWxD) mm : 188x96x56 	 Weight (approx.) grams : 415 (without battery)&nbsp;  

Wireless Connectivity Digital Multimeter Detector with "NCV" & "NCF"

 	  Key Specifications/Special Features:  	 Count / Digit : 6000 / 3-3/4 	 Auto/ Manual&#39;V&#39;(AC/ DC): (600V / 1000V)&nbsp; 	 Continuity&lt;500 beep / Diode check 3V 	 &#39;NCV&#39; Non-Contact AC Voltage Detection (Audible and Visible) &gt; 100V 	 &#39;NCF&#39; Non-Contact Frequency Detection 	 Freeze / Hold Reading Relative reading 	 Auto Power Off (5 mins.)&nbsp;or always ON 	 Measureable temperature from thermocouple -50℃ ~ 1000℃ (-58℉~ 1832℉) 	 Standalone mode or Bluetooth Connectivity transmit data to&nbsp;Smart 	 One / Tablet with iOS APPS or Android APPS&nbsp; 	 Data logger compatible (Bluetooth with memory integrated) 	 Battery Powered: 1 x 9V (6F22 / 6LR61 / 1604)&nbsp; 	 Dimension (L x W x D) mm: 188 x 96 x 56  

Wireless Connectivity Digital Multimeter Detector

Our product lines have been certified by international standards.With accords to the latest EN 61010, EN 61326 standard have been certified by SGS and with TUV certificate. 	 Smart digital multimeter 	 Auto-select and auto-range 	 DC/AC voltage 	 DC/AC current 	 Resistance 	 Diode test 	 Audible continuity test 	 Data hold 	 Max hold 	 Back light 	 Auto power off 	 Low battery indication 	 Overload protection 	 15A  

Shenzhen Everbest Machinery Industry Co., Ltd. (CEM)

The 989 Heavy duty True RMS Industrial Digital Multimeter with TFT color LCD display, providing fast A/D converting sampling time, high accuracy, built-in datalogging and Trend Capture feactures.

Heavy Duty True RMS Digital Multimeter

石家庄数英仪器有限公司

This function and arbitrary waveform generator boasts a robust housing for extra durability. It is designed to display high-precision results with its digital screen. This waveform generator is easy to operate and maintain. 	 4.3&#39; color TFT LCD. 	 Dual outputs. 	 Frequency range up to 30MHz. 	 120MHz sampling rate, 14 bits vertical resolution. 	 350MHz frequency counter. 	 USB Host, USB device and RS-232. 	 Rectangular shape. 	 With an adjustable stand. 	 Good performance. 	 Robust housing for extra durability. 	 Display high-precision results. 	 Easy to operate and maintain.  

Function & Arbitrary Waveform Generator

科泰仪器（昆山）有限公司

Featured here is a highly sensitive and accurate multimeter in a handy, compact housing. The digital analog multimeter guarantees quick and easy measurement of AC/DC voltage, DC current and resistance. It makes an essential tool for electrical technicians. 	 Dual display (analog and LCD). 	 Overload protection. 	 19 range in 5 functions 	 AC/DC voltage measurement up to 500V. 	 DC current measurement up to 10A. 	 Resistance measurement up to 2M ohm. 	 Audible continuity tests. 	 Input impedance: 10M ohm. 	 Accessories: 9V battery, test leads, English manual, gift box. 	 AC Voltage: 200/500V. 	 DC Voltage: 0.2/2/20/200/500V.  

Digital Analog Multimeter

漳州市华仪电子有限公司

Highlighted is a digital multimeter with a four-digit display screen that is easy to read. The advanced mechanism is engineered to endure high-voltage input. This sturdy multimeter is a great accessory for electricity faultfinding. 	 Voltage: 200 to 1,000V. 	 Impedance: 200 to 2,000ohm. 	 Weight: 150g. 	 Available in various designs.  

 	 Professional digital multimeters safety conformance 	 EN 61010-1 CAT Ⅳ 600V, CATⅢ 1,000V 	 1,000V input protection on all ranges 	 10A/1,000V &amp; 0.5A/1,000V fuses protection on current ranges  

This outlined cable testing multimeter comes with a specially engineered detector for enhanced accuracy. With a conventional four-digit display, this multimeter is easy to read. This handy multimeter is a brilliant faultfinding device for&nbsp;electronic appliances.   Voltage: 200 to 600V.   Impedance: 200 to 20M ohm.   Cables test for RJ11, RJ12, RJ45 and USB.   Powered by two AAA 1.5V batteries.  

Cable Testing Multimeter

Honeytek Instrument (HK) Co.

 The digital multimeter comes with a large LCD screen for data displaying. The simple design of the buttons on the front makes the device user-friendlier. This multimeter is a great tool for electrical measurements such as voltage, current, ampere and more. 	 LCD size: 53 x 29mm. 	 Wide applications. 	 Available in various models and specifications.
	&nbsp;   

 This true-RMS industrial digital multimeter comes with a full graphics type LCD display with white backlight for clear viewing. It is equipped with the ability to record data of signals and review trend capture curve while you work on other projects. The compact size ensures easy holding by hand. 
 
  With 50,000 counts. 
  Function: voltage DC/AC, current DC/AC, temperature, resistance, capacitance, frequency, diode and&nbsp;continuity measurement. 
  Bluetooth technology. 
 

Industrial Digital Multimeter

This digital multimeter quickly and accurately measures AC/DC voltage, current , resistance, capacitance and frequency. This digital multimeter features an automatic ranging function for convenient and time-saving operation. The backlit display is easy to read under any light conditions. 	 Fuse: 500mA/ 500V, 10A/500V. 	 Fuse size: 6.3 x 32mm, 6.3 x 32mm. 	 3 3/4 digits 3999 count. 	 Overload protection. 	 DC/AC voltage measurement up to 600V. 	 DC/AC current measurement up to 10A. 	 Resistance measurement up to 40M ohm. 	 Capacitance measurement up to 100F. 	 Frequency measurement up to 10MHz. 	 Diode tests. 	 Accessories included: 9V battery, elastomer boot, test leads, English manual, gift box.  

DCV:200MV-600V=/-(0.5%+2),ACV:200V-600V+/-(1.2%+10),DCA:200u A-10A+/-(1%+2),OHM:200ohm-2m ohm +/-(0.8%+2),hFE:yes,Diode Text:yes,power supply:9V 6F22,maximum display:1999
    Product size:95*59*18mm,product net weight: 68g  Packing:doublelister,quantity:60pcs,dimension:45.2*31*34, G.W: 9.5KGS,N.W.:8.5KGS  

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?