Q-Nitto Hong Kong Limited

METAL INJECTION MOLDING  Country of Origin： Taiwan  What isMetal injection molding: Metal injection molding (MIM) is a metalworking process by which finely-powdered metal is mixed with a measured amount of binder material to comprise a "feedstock" capable of being handled by plastic processing equipment through a process known as injection mold forming.  Advantage to Client： ①The molding process allows complex parts to be shaped in a single operation and in high volume. ②Ability to mold metal texture comparable to plastic. ③Using a mould allows low cost mass production to be capable. ④Can avoid additional processing for lower the production cost. lathe etc. ⑤Able to produce horizontal holes and deep holes that die casting cannot make. ⑥The variety of metals capable of implementation within MIM feedstock are referred to as powder metallurgy, and these contain the same alloying constituents found in industry standards for common and exotic metal applications.  Made in Taiwan： ①Lower the Processing Cost.　　　　　　　 ②Stablize the product quality.　　　　　　　　 ③Capable of small to mass production.　　　  　  　　 ④Consistent production process.　　　  　  　　 ⑤High Completion of Infrastructure and highly unaffected by political unstability.  ※References：WIKI         

Metal injection molding products

METAL POWDER METALLURGY  Country of Origin: Taiwan  What is Metal powder metallurgy： Metal powder metallurgy (PM) is a term covering a wide range of ways in which materials or components are made from metal powders through compaction. Powder compaction is the process of compacting the metal powder in a die through the application of high pressures.  Advantage to Client： ①Using a mould allows low cost mass production to be capable.　　　　　　　 ②Able to deal with materials that are difficult to lathe.　　　　　　　 ③Powder metallurgy grants adjustability in the ratio of the material.　　　　　　　 ④Product contains many airholes which allow its actual density to be lighter thanits appearance, therefore achieving light weighted products.　　　　　　　 ⑤Lubricating oil can be filled in air holes without additional replenishments.  Made in Taiwan： ①Lower the Processing Cost.　　　　　　　 ②Stabilize the product quality.　　　　　　　　 ③Capable of small to mass production.　　　  　  　　 ④Consistent production process.　　　  　  　　 ⑤High Completion of Infrastructure and highly unaffected by political unstability.  ※References：WIKI      Material: Stainless steel   Use: Gear Material: Iron-based material   Use: Bevel gear Material: Iron-based material   Use: Electroplating products   Use: Bearings Material: Copper-based material   Use: Oil Pump, inner and outer rotor Material: Iron-based material     

Metal powder metallurgy products

MGM Industries & Company

 	 EIGHT Colors - Pink Purple Blue Red Green Bright Green Yellow Orange 	 2.5 x 4 x 2.5 inch 	 Silicone,BPA free &amp; FDA approved.&nbsp;&nbsp;100% FOOD GRADE ,No fillers, no chemical coatings, pinch test passed 	 ECO-FRIENDLY AND DISHWASHER SAFE 	 &nbsp;EASY TO WASH, EASY TO RELEASE, NONSTICK 	 Make all kinds of baked and frozen delicacies you want with these flexible baking cups! These muffin holders are perfect for parties such as birthdays, baby showers, weddings, anniversaries. They can also be used as food divider in kids&#39; Bento lunch boxes.  

Reusable Nonstick Silicone Baking Molds

 Reusable Silicone Baking Cups, Pack of 12  	 12-pack of reusable baking cups; made of food-grade silicone; ideal for baking, lunch/snack cups, and more 	 Cost-saving alternative to disposable paper cups; works with any standard muffin pan 	 Effortless food release&mdash;no greasing or cooking spray needed; stain and odor resistant 	 Freezer-, microwave-, and oven-safe (up to 500 degrees F); dishwasher-safe for quick clean up 	 Measures 3.5 cm high (1.38 inches); includes 2 of each color: pink, orange, yellow, green, blue, and purple  

Reusable Silicone Baking Cups Set

显和有限公司

Rectangular-shaped Silicone Cake Mold includes the following features: 	 Color: Available in various colors 	 Allowing your cakes, jelly, bread or bakery to be made into rectangular design 	 Microwave oven safe 	 Withstand temperature from -40&deg;C - 230&deg;C, can be heated in microwave ovens 	 Non-stick, durable and easy to clean  Material: 	 Food grade silicone  Size closed: 	 Length of 16cm x Width of 8.6cm x Height of 5cm  

Silicone Mold

Yangjiang YF Hardware Co.,Ltd

Product Name6pcs Silicone Mold Set Cake Tools Home Gadgets Bakeware Bread Pan Kitchen Accessories Chocolate Mold Nonstick Silicone Cake MoldMaterialFood grade siliconeSize6Cavity：30*18*4.5cm,149g12Cavity：30*19.5*4.5cm,146gRectangle：253*120*72cm，150gsquare：26*24.5*5cm，174gRound Hollow Chimney ：27.5*24.5*10.5cm，202gRound：28.7*24.5*6cm，159gCarton information58.8*44.5*53cm,10set,9.85kgFunctionbaking toolColorANYMOQ500setFeatureEnvironmentally friendly, non-toxic, heat-resistant, non-stick, durable safe easy cleanScope of ApplicationMicrowave oven, dishwasher cabinet, steamer, can sterilized by boiling..CustomizationAccepted(design,logo,color etc)

6pcs Silicone Mold Set Cake Tools Home Gadgets Bakeware Bread Pan Kitchen Accessories Chocolate Mold Nonstick Silicone Cake Mold

联合育儿(中国)有限公司

  Plastic injection moulding or tooling, Products Design, 3D CAD & CAM Drawing, OEM & ODM is welcome   Product Design  Our CAD & CAM office had installed with the latest computer   design software such as 'Pro-Engineer', 'Plastic Advisor' and 'CATIA'   With aimed of these programme we can simply input  the 3D geometric (dimensions) of the designed product   Then we can perform the virtual fits, colour match and assembly  simulation of each product component Also, we can saving much time   in making prototype muck up and simplifier our mold making.   Capacity and type of plastic injection mould & tooling making:   Video & Audio Cassette Housing & Parts   Fully Automatic screw Moulds (i.e. Bottle Cap)  Multi-cavity Hot runner Moulds  Electrical Appliances & Household Products   Precision Gears  

Plastic injection moulding or tooling

 	 Multi function FDA approved BPA FREE Silicon Candy Molds&nbsp; 	 Perfect starter candy making kit for aspiring pastry chef 	 Material: Silicone, FDA approved and BPA free 	 Non-stick coating 	 Durable and long-lasting 	 Easy to clean 	 Also can be Homemade Candle making kits, Homemade Soap making kits! Can even be used as Ice Trays! 	 Heat resistant up to 450&deg;F 	 Pattern:&nbsp;Chocolate Spoon mold,Chocolate Numbers 0-9,Chocolate Leaves,&nbsp;Heart shaped molds, and more 	 Can be customised, into specify shape or cartoon shaped  

Silicon Candy Molds 

6-Cavity Silicone Ice Cube Tray with Transparent Lid Cover includes the following features : Designed with 6 individual cavities, allowing you to make square-shaped ice cubes at onceMade with silicone materials, safe, odorless and non-toxicEach flat cube compartment is separate from others so you can easily push from the bottom, no need for awkward bending or twistingFeatures a PP lid which is designed higher for easy filling and transporting, not easy to spill, keeps ice cubes from absorbing freezer odorTrays stack easily and neatly in the freezer without sticking to each otherEasy to clean, just hand wash with mild soap and waterBesides water, fill with any of your favorite juice, cold coffee, lemonade and milk to make flavored ice cubeSuitable for large gatherings, parties, or occasions where you need a significant amount of iceVarious colors are availableMaterial : Silicone bodySize closed : Length of 18 cm x Width of 11.5 cm x Height of 5.5 cmCavity - Length of 4.8 cm x Width of 4.8 cmNet weight of 154.5 grams

6-Cavity Silicone Ice Cube Tray w/ Transparent Lid Cover

 	 FOR ALL AGES: these are perfect for healthy kid-friendly fruit juice, lemonade or milkshake ice pops, and adult-friendly margarita, vodka or frozen cocktails. 	 ECO-FRIENDLY: Made of BPA-Free, FDA approved PP plastic; the posicle molds are dishwasher safe and reusable - safe for your family and the environment. 	 MEASUREMENTS: Our popsicle molds are the perfect size to put in a juice, alcohol, or special combination mix you wish. They measure 4.5cm x 12.5cm. 	 COMBO COLORS: These umbrella shaped ice cream pop mold trays have an exciting combination of bright summer colors, including blue, pink, orange &amp; purple! 	 EASY TO USE: Making these fun summer snacks is easy. Just fill it up with your chosen beverage, put on the tops and let them freeze over in the freezer!  

Kids Umbrella Shapes Popsicle Ice Mold Maker Set

  Customer design or OEM mold and project is welcome;   Product Design  Our CAD & CAM office had installed with the latest computer   design software such as 'Pro-Engineer', 'Plastic Advisor' and 'CATIA'   With aimed of these programme we can simply input   the 3D geometric (dimensions) of the designed product   Then we can perform the virtual fits, colour match and assembly  simulation of each product component Also, we can saving much time   in making prototype muck up and simplifier our mold making.   Capacity and type of plastic injection mould & tooling making:   Video & Audio Cassette Housing & Parts   Fully Automatic screw Moulds (i.e. Bottle Cap)  Multi-cavity Hot runner Moulds  Electrical Appliances & Household Products   Precision Gears  

Silicone Letter Alphabet-shaped Ice Cubes Trays includes the following features : 	 Suitable for hold alphabet-shaped ice cubes 	 Durable protection enables stacking during storage  Material : 	 Food grade silicon housing  Size closed : 	 Length of 18.5 cm x Width of 11.5 cm x Thickness of 1.5 cm  

Alphabet Ice Tray

Silicone Holiday Ice Cube Tray includes the following features : 	 Suitable for hold various shaped ice cubes 	 Durable protection enables stacking during storage 	 Cold-resistant temperature: -60 degree 	 Heat-resistant temperature: 240 degree 	 Available in various colors  Material : 	 Food grade silicon housing  Size closed : 	 Length of 21.3 cm x Width of 10.5 cm x Thickness of 1.2 cm  

Décor Ice Tray

Silicone Ice Cube Tray for 4 Glass-Shaped Ice Cube includes the following features : 	 Mold for 4 wine glass shaped ice cube 	 Durable protection enables stacking during storage  Material : 	 Food grade silicone  Size closed : 	 Size of 12.2 x 12.2 x 5.8 cm  Available in different colors

Ice Cube Tray

Silicone Cake Pop Mold includes the following features :&nbsp; 	 Makes 6 pieces of flower-shaped cake pop&#39;s 	 Included 6 pieces of cake pop sticks 	 Easy to clean and to store  Material : 	 Food grade silicone  Size closed : 	 Length of 24 cm x Width of 9.4 cm  

Cake Pop Mold

16-Cavity Silicone Ice Cube Tray with PP Lid Cover includes the following features : Designed with 16 individual cavities, allowing you to make rectangular-shaped ice cubes at onceMade with food-grade silicone materials, safe, odorless and non-toxicFlexible mold allows you to demold easily without affecting the shapeFeatures a PP lid to prevent spills and keep ice cubes from absorbing freezer smellsTrays stack easily and neatly in the freezer without sticking to each otherEasy to clean, just hand wash with mild soap and waterAlso can be used for all kinds of chocolates, candies, jellies and mini dessertsBesides water, fill with any of your favorite juice, cold coffee, lemonade and milk to make flavored ice cubeSuitable for large gatherings, parties, or occasions where you need a significant amount of iceVarious colors are availableMaterial : Food-graded silicone body with PP lidSize closed : Length of 31.7 cm x Width of 12.5 cm x Height of 4.3 cmCavity - Length of 5.5 cm x Width of 3 cmWeight of 85 grams

16-Cavity Silicone Ice Cube Tray w/ PP Lid Cover 

Honeybee Shaped Ice Cube Tray includes the following features : 	 Ice tray for make a honeybee shape 	 Available in various colors  Material : 	 Food grade silicone body  Size closed : 	 Length of 5.7 cm x Width of 5.7 cm x Thickness of 2.9 cm 	 Weight of 80 grams  

爱知达国际有限公司

  ALUM 8/10/12 HOLES POPSICLE  

Popsicle with 24 pcs wooden sticks. 8, 10 and 12 holes for you to choose. Convenient kitchen helper add more creativity to your home kitchen. Easy and handy to enjoy popsicles. Best choice for summer heat. &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;

  SIZE  
 08 HOLES : &nbsp;20.3 x 14.6 x 10.2 H. CM
 10 HOLES:  &nbsp;23.0 x 14.5 x 10.0 H. CM
 12 HOLES:  &nbsp;21.0 x 12.0 x 8 H. CM

Alum 8/10/12 Holes Popsicle

 	 Ice cream tool Wheat straw Eco-friendly Mini alphabet Ice cream Ice Pop Maker and Popsicle Mold 	 Material: Wheat straw or PP Plastic, eco-friendly, healthy 	 Design: make your popsicles into alphabet shape 	 Help babies learn enlish alphabet while eating popsicle 	 capacity:8 popsicles  

Ice Pop Maker and Popsicle Mold

Silicone Cake Pop Mold includes the following features : 	 Makes 6 pieces of flower-shaped cake pop&#39;s 	 Included 6 pieces of cake pop sticks 	 Easy to clean and to store  Material : 	 Food grade silicone  Size closed : 	 Length of 24 cm x Width of 9.4 cm  

Silicone Food Mold

嘉宏制品有限公司

   Food grade cookie cutter with wooden stick set.   MOQ: 3000pcs.  

Cookie Cutter Set 

Square-shaped Silicone Cupcake Mold includes the following features : 	 Allowing your cakes or bakery to be made into square design 	 Microwave oven safe 	 Withstand temperature from -40&deg;C ~ 230&deg;C, can be heated in microwave ovens 	 Available in different colors  Material : 	 Food grade silicone body  Size closed : 	 Length of 6.5 cm x Width of 6.5 cm x Height of 3.3 cm  

Cup Cake Mold

The particularly notable advantage of this item is its capacity, you see. This high quality mold allows you to make 10 ice pops at once, which is a perfect choice for large production. Plus, as it uses disposable wood popsicle stick, it doesn’t matter if your kids lose them. The structure helps remain the food upright therefore you don’t have to keep an eye on it from time to time. Material: PP (lid), PE (cup), alum (cast).Simple and practical design.10 opaque cubes in total for large production.Offers a classical ice pop shape.Tinted lid.24 pieces of wooden sticks provided.Will not tip in your freezer.Sturdy, durable and easy to clean.Perfect item for creating fun and healthy desserts anytime.Customized colors are welcomed.

Ice Pop Maker

Silicone Ice Cube Tray for 6 Pieces of Ice Cube includes the following features : 	 Suitable for hold 6 pieces of ice cube 	 Durable protection enables stacking during storage  Material : 	 Food grade silicone  Size closed : 	 Size of 18 x 12.5 x 5.5 cm  Available in different colors

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?