茂林(香港)线路板有限公司

   电子线路板生产线之环保仪器。  

环保仪器

福州华诺技术服务有限公司

 Describle: 
&nbsp;The dispensing system, diaphragm pump was designed and Intended built for the distribution of the product called AdBlue, AUS32 or use water etc. It&#39;s Ideal for IBC transfer systems, Permanent magnet pump continuous duty.
 Feature:  	 On/Off switch, easy operated 	 Permanent magnet and continuous duty 	 Built-in back flow&nbsp; 	 Self-priming so pump can be located above water tank 	 Runs dry for extended periods of time without damage 	 Hold excellent motor keep stable temperature of pump body 2m cord plug 	 Stable performance, easy operation   Technicial Sepcification  	  Moedel No.:  FL-540A 	  Voltage  AC230V 	  Frequency  50/60Hz 	  Current  2A 	  Power  On/Off switch 	  Pressure Switch  Backflow design instead of Pressure switch 	  Max Flow  45L/Min (6.8GPM),or 45L/Min for choose, if you have other require pls, contact with us 	  Pressure Off  35PSI /2 Bar, Pressure can be adjust according to customer&#39;s require 	  Speed  2900rpm 	  Body Materials  Aluminum 	  Protection  IP55 	  Liquid of&nbsp; Transfer  AdBlue, AUS 32, Water etc.​  
 Application:  	 This pump is perfect for 	 boats, RVs (Recreation Vehicles) 	 Mobile Car washer, Sprayer 	 Agricultural Irrigation 	 Any place need water transfer&nbsp; etc 	 IBC TransferProduct details  

40L/Min Self Priming Adblue Pump with CE Certificate

 Describle: 
High flow HL serives pumps are designed for a while range of applications and&nbsp;are constructed from a selection of materials suitable for handling a broad range of chemicals.
 Feature:  	  ​ 5 chamber high flow pumps, self-priming and can run dry without damage 	 Intended for intermittent duty cycles but can be run continuously for short periods of time 	 light weight and smart , high pressure 	 easy to install, steady performance 	 Build in Pressure switch, over-heat protection 	 medium temperature: 60&ordm;C 	 suitable&nbsp;for adbule, acidity,alkaline and corrosive liquid etc. 	  Technicial Sepcification  	  Moedel No. : FL-12A 	  Voltage  :DC 12V 	  Frequency:  50/60Hz 	  Current:  16A 	  Pressure Switch:  Build in 	  Max Flow : 40L/Min (6.6GPM),or 45L/Min (7.92GPM) for choose, if you have other require pls, contact with us 	  Pressure Off : 40 PSI /2.75 Bar, Pressure can be adjust from 30psi to 70 psi according to customer&#39;s require 	  Speed:  2900 	  Body Materials:  Aluminum 	  Protection : IP55 	  Liquid of&nbsp; Transfer:  AdBlue, Water etc. 	  Application:  	 This pump is perfect for:water transfer, delivery 	 spraying 	 Agricultural Irrigation 	 dispensing and pressure boosting etc.  

DC Self-Priming Pump for Spraying

 Describle: 
&nbsp;&nbsp; &nbsp; &nbsp; &nbsp;The dispensing system, diaphragm pump was designed and Intended built for the distribution of the product called AdBlue, AUS32 or use water etc.
&nbsp;&nbsp; &nbsp; &nbsp;&nbsp;Ideal for IBC transfer systems, Permanent magnet pump continuous duty.
 Feature:  	 On/Off switch, easy operated 	 Permanent magnet and continuous duty 	 Built-in pressure switch automatically starts and stops pump when faucets is opened and closed 	 Self-priming so pump can be located above water tank 	 Runs dry for extended periods of time without damage 	 Hold excellent motor keep stable temperature of pump body 2m cord plug 	  Technicial Sepcification  	  Moedel No.:  HL-230A 	  Voltage  AC230V 	  Frequency  50/60Hz 	  Current  1.5A 	  Power  On/Off switch 	  Pressure Switch  Build in 	  Max Flow  25L/Min (6.8GPM),or 30L/Min for choose, if you have other require pls, contact with us 	  Pressure Off  35PSI /2 Bar, Pressure can be adjust according to customer&#39;s require 	  Speed  2900rpm 	  Body Materials  Aluminum 	  Protection  IP55 	  Liquid of&nbsp; Transfer  AdBlue, AUS 32, Water etc.​ 	  Application:  	 This pump is perfect for 	 boats, RVs (Recreation Vehicles) 	 Mobile Car washer, Sprayer 	 Agricultural Irrigation 	 Any place need water transfer&nbsp; etc 	 IBC Transfer  

Adblue Pump for IBC Transfer Systems with Pressure Switch

迅特亚洲有限公司

 Speed through smart technology  	 The S3 digital cutter is fast. The basis for the S3&#39;s outstanding productivity are intelligent control software, a fast drive system, and cutting technology perfected over many years. Z&uuml;nd tools optimally designed for use on the S3 complete the system.   Adaptable production processes  	 S3 multi-functional cutting system allows for many and variable cutting processes. With the addition of sophisticated material-handling solution, you can increase production capacity many times over.   Best price-performance ratio  	 The price-performance ratio of the S3 cutter series is excellent. Only the most modern technology and highest-quality components are used. The flexibility, reliability, and quality of the S3 cutter cannot be matched by any competitor.   FLEXIBLE Modular cutter concept  	 With modular tool and material-handling systems, you can tailor your S3 cutter to your specific requirements. Z&uuml;nd&#39;s modular design concept lets you customize your cutting solution according to your specific production requirements.   A flexible choice of tools  	 You have the flexibility to choose precisely the tools you need for the job at hand. Combine the required tools based on your specific requirements. You can equip the S3 with up to two different tools.   Cutting surface and material hold-down  	 The S3 cutting surface is made of acrylic. The material is held down with vacuum and infinitely adjustable across the width. Energy-efficient vacuum generators ensure optimal material hold-down.   Ergonomics and operation  	 The design and build of the S3 are consistently aligned with the needs of our customers. Ergonomic design, easy handling, and user-friendly operation are the result.   Precise stacking with robot  	 Automate picking and sorting of cut parts with a collaborative robot. This enhances the level of automation of your cutting solution and increases productivity. The collaborative robot requires no guards or protective devices.  

Zund S3 Cutting Machine

Hop Yuen Ind'l Ltd

 	 The powder suction device in the spray chamber is sent to a cyclone centrifugal tower to collect the powder in the powder drum (primary recovery), and the remaining part is filtered for further recovery (secondary recovery). 	 The device has the advantages of high recovery rate, convenient color change, compact structure, convenient installation and low noise. Ideal equipment for powder collection.  

Pol Ish Dust Collecter System

 	  Quality at the highest level  	 The G3 Cutter is a precision machine. From innovative drive system to blade, all components are perfectly coordinated. Produce your jobs at the highest quality level, economically and efficiently. Your customers will be thrilled with the results. 	  Modular design for maximum flexibility  	 The extraordinary modularity of our cutting solutions is truly unique. You can always make your G3 cutting system adapt to new requirements with modifications and upgrades. Z&uuml;nd cutters are a safe investment and offer maximum value retention. Z&uuml;nd&#39;s modular design concept lets you put together a tailor-made cutting solution configured to meet specific production needs.&nbsp; 	  Unsurpassed price-performance ratio  	 The price-performance ratio of the G3 cutter series is outstanding. We use only the most modern technologies and highest-quality components. The flexibility, reliability, and quality of the G3 cutter cannot be matched by any competitor. 	  Maximum productivity  	 The overall productivity of the G3 cutting system is unrivaled. We achieve this through the use of intelligent control technology, robust machine components, and sophisticated cutting technology. All components are perfectly coordinated. 	  Flexible tool configuration  	 Define which functions your G3 cutter has to perform and configure your modular Z&uuml;nd tooling accordingly. 	  Integrated Tool initialization  	 The setup of of knife-cutting, routing, and creasing tools occurs fully automatically. The ITI Initialization System makes the process quick and precise.&nbsp; 	  Optimal material hold-down  	 Energy-efficient vacuum turbines ensure reliable material hold-down during the cutting process. The vacuum area is divided into zones, which can be switched on and off individually across the width of the machine.&nbsp; 	  Process materials up to 110 mm/4.3 in thick  	 On a G3 cutting system, you can process materials up to a thickness of 110 mm/4.3 in. Depending on your requirements, the G3 can be configured with a beam height of 60 or 120 mm/1, 2 or 4 in. This means more flexibility and versatility in your production workflow. 	  Ergonomics and operation  	 Configure the D3 according to your specific needs, with cutter extensions and/or material-handling solutions. Just like the cutter, all these options were designed with an eye towards ergonomics. The cutter is easily accessible from all sides, which ensures an efficient production workflow. 	  Automatic Router bit Changer - ARC  	 The automatic router bit/tool changer ARC dramatically reduces set-up times and simplifies tool handling. The magazine can accommodate up to eight different cutting, polishing, or engraving bits. The bits needed for processing are automatically removed, clamped, initialized, and cleaned after each use. The ITI initialization system checks the zero point after each tool change, ensuring perfectly consistent routing depths.  

Zund G3 Cutting Machine

 Integrated Compact Color Camera -ICC 
State-of-the-art sensor technology, high-quality optics, and adjustable LED lighting: the ICC camera detects the exact position of printed material in the cutting area enabling perfect registration.
Perfectly positioned in the center of the module, the camera is able to cover the entire working area.
No matter the lighting conditions - low ambient light, reflective materials, or low-contrast colors registration with the ICC camera is always possible!
All benefits at a glance 	 Fast and easy setup. 	 Reliable and accurate recognition of registration marks and material edges. 	 The laser pointer is used for visual determination of the reference point and facilitates orientation. 	 Completely supported in Z&uuml;nd Cut Center - ZCC with algorithms that intelligently process image data in a matter of seconds. 	 Full compatibility with the OCC camera. Switching between the two systems is seamless.  The Over Cutter Camera - OCC is an intelligent optical system for fully automated digital capture of register marks. The camera is mounted above the center of the cutter, either on a support frame or the ceiling. It captures all register marks within the working area of the cutting system in a single image &mdash; automatically and in a matter of seconds.

 Over Cutter Camera-OCC 
Because of the OCC&#39;s one-shot capture technology, the number of register marks and their position on the cutting surface become completely irrelevant, which significantly increases the overall productivity of the cutting system. OCC data processing functions are completely integrated in the ZCC software: in seconds, powerful algorithms analyze the camera data and compensate for any distortions.
All benefits at a glance 	 One-shot technology captures all register marks at once, resulting in significant time savings and productivity increases. 	 Reduces manual intervention in the production workflow to a minimum. 	 Completely supported in Z&uuml;nd Cut Center - ZCC with algorithms that intelligently process image data in a matter of seconds. 	 Full compatibility with the ICC camera. Switching between the two systems is seamless. 	 Independent of the thickness of printed materials.   Optical Systems  	 We offer customized turnkey solutions for your Z&uuml;nd cutting system. With numerous components, from optical systems and corresponding mounting devices, to monitors for visualization and high-performance software solutions, we will put together the best digital workflow for your needs. 	 Put together a cutting solution according to your needs. Monitors, projection systems, and cameras for material detection and capture can be combined as needed.  

Zund Registration System

JC Universal Group Limited

 	 Designed for fine and ultra-fine cleaning tasks, the xtra line 2can be flexibly deployed and extended due to the modular system concept (building block system) at any time.&nbsp; 	 Different tank sizes can even be easily accommodated in one system, so that individualised systems are conceptualized.  

Elma, Xtra Line

 	 Low Energy Consumption ,Less than 150 watts 	 Low Heat Gain 	 Low Sound Level  

Fan Filter Unit

"Sanyuen" Industrial Painting Equipment’s

 	 &quot;SANYUEN&quot; Clean benches are equipment for obtaining a perfectly clean environment locally, and compared with clean rooms, which composed a whole room, have the advantage of providing a clean environment at low cost. &quot;SANYUEN&quot; Clean benches have come into general use in the electronic computer industrial and medical science, it providing excellent working conditions matched to the field of application have been developed.  

Clean Bench

Maliphant International Sales Ltd

 	 The smart electric pill crusher that protects medical professionals from toxic airborne pill dust  

SafeCrush

Hui Tong Electronic Co.,Ltd

 	 Veton AC axial fans have the impedance protected. It have various of sizes ranging from 80 x 80 x 25mm to 220 x 220 x 60mm. It have the ball bearing and sleeve bearing. It can run on 110-120V AC, 220-240V AC and 380V AC. Special voltage could be customized. In order to meet the worldwide safety requirement. It have obtained the certificates of UL, CUL, TUV, CE, SGS and REACH. 	 Veton AC Axial Fans are made by metal frame or plastic frame. Its impeller have different appearance. We also can provide different wires and housings for it.  Fan model PDF fan model PDF: 	 80 x 80 x 25mm, 80 x 80 x 38mm 	 92 x 92 x 25mm, 92 x 92 x 38mm 	 110 x 110 x 25mm, 120 x 120 x 25mm 	 120 x 120 x 38mm, 135 x 135 x 38mm 	 150 x 150 x 50mm, 172 x 150 x 51mm 	 200 x 200 x 60mm, 220 x 220 x 60mm  

AC Fan, AC Axial Fan 

 	 Veton DC blowers have the reverse polarity protected. It have various of sizes including 5015, 5828, 6015, 7525, 7530, 9733, 12032, etc. It have the ball bearing and sleeve bearing. It can run on 5V DC, 12V DC, 24V DC or 48V DC. Special voltage could be customized. In order to meet the worldwide safety requirement. It have obtained the certificates of UL, CUL, TUV, CE, SGS and REACH. 	 Veton DC blowers have different special requirements in frame design. Special options like auto-restarting function, temperature control function, tachometer speed sensor output, lock rotor alarm output, pulse width modulation (PWM), dust proof and water resistant. We can offer all of these as you requirement.  Blower model PDF blower model PDF: 	 4020 5015 	 5828 6015 	 7525 7530 	 9733 12032  

DC Blower

Ningbo Yi Cheng Da Welding Technology Co., Ltd.

 	 Materials: Anti-static housing case, CPU controlled and transformer and operating soldering handle 	 Usage: Applications on IC soldering and desoldering 	 Material: PVC / ABS 	 Function / Selling Point: Hot air station plus soldering station combined in compact housing case 	 Power Source: Wire 	 Output (Watts): 70W 	 Input Voltage: 220V/110 	 Working Frequency (Hz): 50-60Hz 	 Power Consumption (mAh): 70W 	 Working Hours (Mins / Hours): 12 hours 	 Certification: CE, RoHS 	 Accessories: Power cord, nozzles  

2 in 1 Rework Station

厦门睿康科技有限公司

Product Size: Back: 80*48*11.5cm Seat: 40*43*5cm Shiatsu Back Massager Air Compression Seat Vibration 

 Shiatsu Back Massager with Air Compression

CARPA DESIGN EUROPE, S.L.

• Voltage: DC 12V• 1x 21mm metal cylinder• Max power: 100psi• Electricity: 10A• Inﬂatable air:≥ 27L• Length of the cable: 3m• Length of hose: 70 cm• Digital gauge• 9-piece LED lights• Accessories: 3 separate nozzle adaptors, 1 10A fuse, and 4 valve caps for inflating bikes, tires, balls, and more  

Sparco Air Compressor for bike, paddle surf

Dongguan Watchmaker Technology Co., Ltd.

QUIET OILLESS AIR COMPREESOR

厦门海斯派森电子有限公司

 	 DC 110V~220V home adapter included.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Output: DC 12V 2A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 Air Pressure Strength: Low:25 KPa,Middle:35-40KPa,High:45-48KPa;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 	 AIR MASSAGE STRESS RELIEVER - It has 3x3 airbags inside, so it can provide more massage methods to release stress, relief fatigue and pain for daily use and help for circulation improvement, swollen leg. 	 SELECTABLE MODES AND COMPRESSION INTENSITY - The controller has 3 Intensity Levels and 3 Modes selectable, you can choose a setting for an optimal relaxation experience. 	 ADJUSTABLE LEG WRAPS SIZE - The calf circumference of the leg wraps can be up to 21 inches. The 2 compression leg wraps are made of high grade finely sewn fabric. 	 Automatically shut-off after 15 minutes,  

Air compression Foot massager blood circulation legs machine with new controller 

Shenzhen Urion Technology Co Ltd

 	 Input: 230V/50Hz 	 Power Consumption: 160VA 	 Medication Capacity: 6cc 	 Particle Size: Reparable Fraction 0.5 to 5um 80% MMAD: 2.0um 	 Average Nebulization Rate: Above 0.2ml/min. 	 Noise Level: Below 58 dBA 	 Compressor Pressure Range: 30 ~ 45 Psi(2.1 ~ 3.2 bar) Operation Pressure Range: 10~16 Psi(0.69~ 1.1 bar) Liter Flow Range: 8 ~ 10 lpm Operation Temperature Range: 10C~ 40C (50F~ 104F) Operation Humidity Range: 10~ 95% 	 RH Storage Temperature Range: -20C to 70C(-4F to 158F) 	 Storage Humidity Range: 10~ 95%RH Standard 	 Accessories: nebulizer bottle, 1.6m air tube, mouth piece, adult mask, child mask, air filter (5pcs)  

Compressor Nebulizer

Tianjin Konbest Technology Co., Ltd.

wireless leg massage air compression INTRODUCTION: Pressure therapy is a high class lymphatic drainage and Spa natural health beauty machine in medical and beauty market. In beauty market, the compression system has a soft massage from feet to heart, and it is slimming treatment by drainage dissolved fat cells or bad deposit. In medical market, it has a sequential squeezing from distal to proximal, thus help to improve the circulation of blood and lymph, and to prevent the DVT and PE, trauma, inflammation and edema relief Product Name Pneumatic Compression Therapy System Model KB-9690K(Rechargeable) Brand &amp; Logo Could be customized Features 4 different optional massage modes optimize the treatment effect  air pressure levels could be adjusted for most comfort  Skip care and intensive care function could be chosen separately  Time setting (10-90mins )  Digital display Handle design for convenient using  Computer programs instead of mechanism design for more accuracy   Sequential squeezing and intermittent wave massage combined  Indication lights will be on while related chambers working Device Material ABS Air Bag Material  TPU Size/Weight 21*13*8.6CM  2.5KG Treating Model Mode A/B/C/D Pressure range 30-260mmHg Input voltage AC100-240V, Rated Power 49W Output DC12.6V, 4A  Power supply 5200mAh Li battery Air Chamber 6chambers (air bags) Working Model Digital Operation LEDTouch Screen Plug Available according to different market like US, EU standard. Warranty 12 Months for host device        Company Information We have been in home health care massager and sports recovery filed for more than 10 years. We have our own factory with 12,000square meters more than 100 skillful workers, yearly turn out about 360,000PCS. Our main products include pneumatic compression therapy system, air pressure foot leg massager, fasica massage gun and vibrating foam roller. We could offer one stop solutions for sports recovery.  Exhibition:  FQA 1. Why choose us? 1).Direct Manufacturer:our factory cover 12,000square meters with several production lines, competitive price 2)Professionalexperience:we have been in home care device production especially for air pressure massage for more than 10 years. 3)Customized Service:OEM/ODM available. 4)International Standard:ISO, CE, ROHS 2. When can I get the quotation? We usually quote within 24 hours after we get your inquiry. If you are urgently to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority. 3. How long can I expect to get the samples? After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. 4. Whatabout your payment terms and delivery term? We accept T/T(30% prepayment), D/A, DP.FOB/CIF/CFR upon your request 5.How many days you could make delivery? We often could make prompt delivery within 25-35days for your OEM order based onquantityabout2000pcs.  

(Clone) therapy 6 chamber Air Compression Pressure Therapy System Leg Foot Massager Machine Sport Recovery Boots Pants

Shaoxing Heybei Automotive Co., Ltd.

Rated Power: DC12V Max. Curent: 14A Cylinder Diam: 30mm Cable Length: 3m Rubber Hose: 75cm Max. pressure: 100-150 psi Air Flow: 35 L/min.      

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?