原能工业有限公司

The P150S series gas cylinder valve is suitable for high-pressure, high-purity, corrosive, and toxic gases. It adopts a direct connected diaphragm external seal to prevent the generation of small particles in the area where the gas flows through. It can achieve separate control of filling and discharging, and has the characteristics of low leakage rate and high flow rate. PARAMETERS: 流量系数（Cv） Flow coefficient Cv 0.35 公称压力   Max.working pressure 15 MPa(2200psig) 工作温度    Temperature range -40℃～65℃ 泄漏率     Leak rate 内部internal：＜1×10-9Pa·m3/s 外部external：＜1×10-9Pa·m3/s 连接方式    Connections "NGT、1/2"VCR、1/4"VCR 孔径      Seat diameter size 3.5 mm 制造标准    Manufacturing standards GB/T15382-2021、CGA V-1-2023 MEDIUM WETTED MATERIALS: 阀 体 Body materials：AISI 316L/316L vim+var/哈氏合金 Hastelloy 膜 片 Diaphragm：哈氏合金 Hastelloy +镍基合金 Waspaloy 下主轴 Lower spindle：AISI 316L/316L vim+var/哈氏合金 Hastelloy/镍基合金 Waspaloy 阀 座 Seat disc：PCTFE/PVDF/PI OPTIONS: 电化学抛光 Electrochemical polishing 洁净室装配（百级洁净室） Cleanroom assembly (Class 100 cleanroom) 

P150S series cylinder valve

 Product profile It is the first cut-off (reversing) valve at the bottom outlet of the high temperature and high pressure separator of the core reaction unit of the coal liquefaction unit, which is used to isolate the high temperature and high pressure system of coal liquefaction. Product Parameter Caliperture: entrance 18 "/ exit 4X14" Design temperature: 482℃ Design pressure: 20.55MPa Medium: oil and coal slurry Connection type: butt butt welding Operation type: hydraulic drive About us Founded in Hong Kong in 1988, Yenaut Industries Co., Ltd. is a wholly-owned subsidiary of China Nuclear Energy Industry Corporation.Since its establishment, Yenaut Industries Co., Ltd. has been deeply engaged in the energy industry, with the vision of providing customers with efficient, clean and sustainable energy solutions.Based in Hong Kong, backed by various production bases in Chinese mainland and the strong production capacity of partners, the company provides customers around the world with a wide range of materials, products, equipment and solutions, covering nuclear energy, petrochemical, chemical, coal chemical, electronics industry, semiconductor industry, automobile manufacturing, pharmaceutical and other fields.  

Multi-channel material distribution piston valve

 Product profile The key valves of SUFA hydrogenation station, such as ball valve and regulating valve, are suitable for the integrated pipeline of the hydrogenation station, such as compressor, control cabinet, hydrogenation machine, etc., and the pressure is up to 70MPa, which is also suitable for other similar working conditions of hydrogen energy. Reflects the excellent valve control, safety and sealing performance. Product Parameter Size: 3 / 8 ", 9 / 16" Pressure: 70MPa Design standard: BS / EN12516-2, etc Main material: stainless steel, etc Connection type: sleeve ring connection, etc Operation type: manual, electric, etc About us Founded in Hong Kong in 1988, Yenaut Industries Co., Ltd. is a wholly-owned subsidiary of China Nuclear Energy Industry Corporation.Since its establishment, Yenaut Industries Co., Ltd. has been deeply engaged in the energy industry, with the vision of providing customers with efficient, clean and sustainable energy solutions.Based in Hong Kong, backed by various production bases in Chinese mainland and the strong production capacity of partners, the company provides customers around the world with a wide range of materials, products, equipment and solutions, covering nuclear energy, petrochemical, chemical, coal chemical, electronics industry, semiconductor industry, automobile manufacturing, pharmaceutical and other fields.  

hydrogen production system valve

 Product profile The valve by the medium pressure, normal or abnormal stop the pump, by the disc and the medium back pressure and push the valve disc, first quickly close most of the stroke, and then use the damping of the buffer device, slow down the rest, to prevent the destructive water hammer and participate in controlling the valve of the reverse speed of the pump. Generally installed in the pump mouth, the main function is to prevent the medium backflow, prevent the pump and its drive motor reversal, effectively solve the impact of the pipeline system, as well as the discharge of the medium in the container, is widely used in water purification, source water, sewage, sea water and other medium supply and drainage system. Product Parameter Size range: DN400~800 Pressure rating: PN6~16 Design standard: JB / T 13880, CJ / T514 Main material: QT 500-7 Connection type: flange type Operation type: automatic About us Founded in Hong Kong in 1988, Yenaut Industries Co., Ltd. is a wholly-owned subsidiary of China Nuclear Energy Industry Corporation.Since its establishment, Yenaut Industries Co., Ltd. has been deeply engaged in the energy industry, with the vision of providing customers with efficient, clean and sustainable energy solutions.Based in Hong Kong, backed by various production bases in Chinese mainland and the strong production capacity of partners, the company provides customers around the world with a wide range of materials, products, equipment and solutions, covering nuclear energy, petrochemical, chemical, coal chemical, electronics industry, semiconductor industry, automobile manufacturing, pharmaceutical and other fields.   

Micro-resistance slow-closed check valve

Guangdong Dinglisheng Technology Co., Ltd.

真空压缩袋 一种耐用、密封的存储解决方案，旨在通过真空泵或阀门去除空气来压缩衣物、床上用品或季节性物品。它由防穿刺的多层聚乙烯 （PE） 或环保材料制成，可节省高达 80% 的存储空间，同时保护内容物免受灰尘、湿气和害虫的侵害。具有加固接缝、单向空气阀和透明面板，便于识别。可重复使用，重量轻，非常适合旅行、壁橱整理或长期保存。减少杂乱，最大限度地降低霉菌风险，并取代笨重的容器，为家庭和商业用途提供经济高效、节省空间的存储。 

Transparent Best Embossed Sous Vide Vacuum Pack Bags

安徽方兴实业有限公司

Gate valve

西安西进进出口有限责任公司

The displayed ball valve is finished in a silver tone. It is crafted of sturdy materials for lasting durability. It features a solid construction and locking handle, allowing easy installation and operation. This valve is your good helper to control the flow of gas and liquid within the pipe.

&bull; Ball Valve.
&bull; Made of sturdy materials.
&bull; With a locking handle.
&bull; In silver finish.
&bull; Easy for operation.
&bull; Made in Shaanxi.

Ball Valve

宁波东海集团有限公司

Available in both floating type and trunnion mount, this ball valve is constructed with stainless steel and other durable materials to guarantee safety and longevity. It controls the flow across a pipeline by a rotating wheel, able to perform complete shutoff with minimum wear and tear.   Body material: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, etc.   Ball type: floating ball, trunnion mounted ball.   Manufacturing standards: API, ANSI, BS, DIN, and JIS.   Size range: from 1/2 inch to 36 inches (DN15mm-DN900mm).   Pressure: from ANSI class 150 to 2500 (PN1.6-42MPa).   Applicable temperature: from-196 degrees Celsius to 380 degrees Celsius.   Connection: flanged, butt-welded.  

Yiwu Yilingnuo Sanitary Ware Co Ltd

Shown here is an angle valve with a polished surface. This angle valve is made of high-quality copper for added durability. This copper angle valve comes with robust construction for a long lifespan.
 
  Material: copper. 
  Durable structure. 
 

Angle Valve

Fitwell Polytechnik Pvt Ltd

 	 That CPVC Pipes Fittings which include the product range of Ball Valve, Brass ElBow, Brass FTA, Brass MTA and etc.  

CPVC Fitting

精俊国际

Highlighted here is a valve designed for flow regulation. It has a metallic toned body with a handle on top for control. This valve is durably constructed to ensure a long working life. 	 Body material: C3771B. 	 Nominal diameter: RC 1/4&quot;. 	 Spacing: 53mm. 	 Mass: 0.8kg. 	 Max inlet pressure: 250PSI. 	 Metallic body. 	 With a handle on top. 	 Durable construction. 	 Long working life. 	 Ideal for flow regulation. 	 17.2 bar BVC-06 is ball valve with built-in check valve.  

High Pressure Check Valve

RegO 3129G is one of the External Hydrostatic Relief Valves.
External Hydrostatic Relief Valves are designed especially for the protection of piping and shut-off valves where there is a possibility of trapping liquid LP-Gas or anhydrous ammonia. They may be installed in pipelines and hoses located between shut-off valves or in the side boss of RegO shut-off valves.
&nbsp;
 Specification:  	 Part Number:  RegO 3129G  	 Start to discharge setting PSIG: 250 	 Valve body material: Brass 	 Spring: Stainless Steel 	 Container connection M. NPT: 1/2&rdquo; 	 Height (Approx.): 2 19/32&rdquo; 	 Wrench Hex Section: 1 1/8&rdquo; 	 Protective Cap: 3129-40P 	 Pipe-away/Adapter of Threads: 3129-10* 	 Application: Commercial, Industrial 	 Gases: LPG, Anhydrous Ammonia   Features: 
- Relief valve designed to automatically reseat firmly after discharge.
- Resilient seat disc provides a &ldquo;bubble-tight&rdquo; seal.
- Available in both brass and stainless steel.
- Available in configurations that permit direct attachment of vent piping when required.

Pressure Relief Valve

CEME Spa

This is a series 88 solenoid valve. The valve is supplied with a three-pole plug connector (UNI ISO 6592). It is suitable for industrial systems. 
    Sealing: NBR on request FPM, EPDM, EPDM-KTW  Body: brass  Internal parts: stainless steel  Fluids: water, air  

Solenoid Valve

琪宏企业有限公司

   This brass shower volume control is ball valve action, can prevent water leaks efficiently.   Adjustable flow from stopping to full on, 1/2&rdquo; MIP x 1/2&rdquo; FIP connection.   Brass body with zinc die cast control handle, chrome plating finish.   Material: brass body/zinc handle.   Action: ball valve.   Connection: 1/2&rdquo; MIP x 1/2&rdquo; FIP.   Weight: 127g.   Finish: chrome plated.  

Ball Valve Action Brass Shower Volume Control Valve

Ningbo Bosen Fala Capacitor Co.,Ltd

This is emergency solenoid valve use for GAS pipe link gas detector, the detector will send signal to solenoid valves by connecting cables, and solenoid valves will close when LPG or LNG leakaging in the house.

With wrought aluminum or brass alloy for body

More size: 1/4inch (10mm) 1/2inch(15mm) and 3/4inch(20mm) 1inch(25mm) 1 1/4inch(32mm)
The details as follows:
Technical Data
*Suitable gas types: town gas *Closing modes: current impulse or manual
*Body: wrought aluminum or brass alloy *Driving Voltage: DC 9-24V
*Sealing material: NBR rubber
*Close time :&lt;1sec
*Operation temperature:-10~50&deg;C
*Explosion proof mark: Exmb ||T4
*Pressure max :150kpa
*Lead wire :0.4m
*Connection: G1/4&quot;,G1/2&quot;,G3/4&quot;,G1&quot;, G1 1/4&quot;
*Turn on :manual&nbsp; .

LOWEST PRICE SUPPLY.
We will supply best quality, fast delivery time, best service and reasonable price to establish long cooperate with you...OEM and ODM are welcome.
PLEASE NOTE: the fast delivery time, such as 20000pcs will finish them with in 1 month when we have agreement.


We will supply free sample to let you check the quality first. CE approved
Welcome to send inquiry, we will send our catalog to you by email.


&nbsp;

Gas Emergency Solenoid Valve

Yueqing Kanghong Electronic Co., Ltd.

 This is a solenoid valve with a pilot action way. Professionally designed, this solenoid valve can work under a wide range of pressure levels. This high quality solenoid valve is durable and easy to use. 
 
  Action way: pilot type. 
  Working pressure: 0.02MPa-0.8MPa. 
  Connection way: four-tenths male thread. 
 

山东鼎隆进出口有限公司

   Material: stainless steel.   Stainless steel investment precision casting.   Threaded end.   CNC machined.   Din2999 NPT BSP BSPT iso228-1 thread.   Size from 1/8&quot; to 4&quot;.   1/8&quot; 1/4&quot; 3/8&quot; thread drilled other sizes CNC machined.   ASTM A351 (304, 304L, 316, 316L).   -60 F to 450 F.   150lbs pressure rate.   Strong and tough quality.   Long service life.   Price negotiable.  

Stainless Steel Equal Tee

华宇科技有限公司

 Type: Normally-Closed 2-Way
Medium: Air (40 micron filtration)
Temperature Range: 30 to 180&deg;F
Power Consumption: 0.67 watt
Response: 5 to 10 milliseconds
Mounting: In-line
Ports: #10-32
Operating Range: 90% to 150% of rated voltage
Air Flow: 0.6 scfm @ 100 psig; 17 l/min @ 7 bar
&ldquo;L&rdquo; option - 0.5 scfm @ 50 psig; 14 l/min @ 3.5 bar
&ldquo;H&rdquo; option - 0.45 scfm @ 25 psig; 13 l/min @ 1.8 bar
Pressure Range: 28&rdquo; Hg Vac. to 105 psig; 0 to 7 bar max
&ldquo;L&rdquo; option: 28&rdquo; Hg Vac. to 50 psig; 0 to 3.5 bar max
&ldquo;H&rdquo; option: 28&rdquo; Hg Vac. to 25 psig; 0 to 1.8 bar max 

Banseok Precision IND. Co., Ltd.

 The precision valve outperforms&nbsp;the rest with high stability. It is manufactured under strict quality supervision. This precision valve is designed suitable for various industrial applications. 
 
  Diaphragm type. 
  Viscosity: high, middle and&nbsp;low. 
  For grease, silicone, oil, epoxy, two-liquid type epoxy, silicone urethane anaerobic UV and&nbsp;anaerobic adhesive materials. 
 

Precision Valve

DWYER INSTRUMENTS HK LTD

   W.E. Anderson a Division of Dwyer Instruments Inc., the preferred source for your complete range of practical and affordable instrumentation, is announcing the release of its  NEW SERIES WE01 AUTOMATED 2-PIECE NPT STAINLESS STEEL BALL VALVE.    The  Series WE01  incorporates a 2- piece stainless steel ball valve for great flow rates with minimal pressure drop. The valve features a blowout proof stem for added safety, reinforced PTFE seats and seals for longer life, and a 316SS (ASTM CF8M) ball for better performance. Actuators are direct mounted creating a compact assembly for tight spaces. Limit switches are able to be mounted directly to the valves allowing for remote position indication.   The Series WE01 can be configured with either an electric or pneumatic actuator. Electric actuators are available in weatherproof or explosion-proof, a variety of supply voltages and two-position modulating control. Two-position actuators use the supply voltage to drive the valve open or closed, while the modulating actuator accepts a 4 to 20mA input for valve positioning.&nbsp; Actuators feature thermal overload protection and permanently lubricated gear train.   The pneumatic double acting actuator uses an air supply to drive the valve open and closed. The actuator has two supply ports, with one driving the valve open and the other driving the valve closed. Spring return pneumatic actuators use the air supply to open the valve and internally loaded springs return the valve to the closed position. Also available is the SN solenoid valve to electrically switch the air supply pressure between the air supply ports for opening and closing the valve. Actuators are constructed of anodized and epoxy coated aluminum for years of corrosion free service.  

Automated 2-Piece NPT Stainless Steel Ball Valve

陕西君海柴油机进出口有限责任公司

It provides a wide range of control valves for the process industry. These include severe service, choke, desuperheating and turbine bypass applications.
&nbsp;

Valve Cage

广州图波贸易有限公司

   Material: stainless steel (sleeve).   Simple connection by pressing its sleeve.   Flexible customized valve size between 16mm and 20mm.   U-shape ball valve used specially on pex pipes.   Sturdy and durable composition of enhanced strength.   Widely chosen pipe ball valve for professional pipe repair and household DIY projects for its reliability and security.  

Pipe Ball Valve

Tai Shing Electronic Components Corp

The water valve module offers outstanding performance with a PPS construction. The rigid construction ensures high durability. This water valve module is a great choice for your faucet designs.

 
  Easy installation. 
  Materials: PPS.

 &nbsp; 
 

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?