兴利电脑制品有限公司

The TDSB630755C050ON is a digital temperature probe with Maxim Integrated DS18B20 sensor. It is a popular and widely used digital temperature sensor with 1-Wire communication with the host device. The DS18B20 is known for its simplicity, accuracy, and ease of use, making it suitable for various applications.  The DS18B20 temperature probe utilizes a digital temperature sensor based on a silicon integrated circuit. It is designed to provide accurate temperature measurements with a resolution of up to 12 bits, allowing for temperature readings with precision down to 0.0625 degrees Celsius.  One of the key features of the DS18B20 is its unique 1-Wire interface. This interface enables multiple DS18B20 sensors to be connected to a single data line, simplifying the wiring and reducing the number of pins required for communication. Each DS18B20 sensor has a unique 64-bit serial code, which allows for individual identification and addressing when multiple sensors are connected in a network.  The DS18B20 temperature probe operates over a wide temperature range, typically from -55 degrees Celsius to +125 degrees Celsius (-67 to +257 degrees Fahrenheit). It is capable of measuring temperatures with high accuracy, typically within ±0.5 degrees Celsius in the range of -10 to +85 degrees Celsius.  The probe is housed in a SSU316 stainless steel sheath, which provides mechanical protection and makes it suitable for use in various environments, including industrial, automotive, and outdoor applications.  The DS18B20 temperature probe communicates using the 1-Wire protocol, which allows for simple and low-cost integration with microcontrollers, microprocessors, and other digital devices. It requires only a single data line and a pull-up resistor for communication. The sensor can be powered directly from the data line using parasitic power, eliminating the need for an external power supply in some applications.  To read temperature data from the DS18B20, the host device sends specific commands and receives the temperature values in a digital format. There are software libraries and protocols available that simplify the integration of the DS18B20 into various platforms and programming languages.  Application: Home automationWeather monitoringIndustrial controlScientific research

Temperature Probe - Digital

迈高达科技有限公司

Product numberMTR070WV60A-V1ProcessorCortex-A8 architecture, clocked at 1.0GHZMemory512MB of DDR3Flash256MB of NandFlashScreen size7 inchesResolution800x480DisplayWide temperature type, 64K colors or 260,000 colorsLED backlightLife &gt; 25000 hoursTouch screenFour-wire resistive touch screen (integrated driver in Wince system)Operating systemWindows CE 6.0 R3Protection classIP65 (front panel)Working conditions12-24V DC, 600mAOperating temperature・10~55℃・20~80℃ (Storage temperature)Working humidity10~90%RHHardware interfaceFour-way 3-wire RS-232 serial ports (C0M1, COM2, COM3, COM4), two of which (C0M1, COM2) can be used as RS-485 bus interface extensions (optional with isolation mode)A secondary isolated CAN bus interface. (optional)-Use the built-in W coin interface. (optional)One USB Device interface, support Activesync and PC synchronous communication and joint debugging applicationTwo-way USB Host interface, support mouse, keyboard, U disk and other devicesOne use 100M Ethernet interfaceSD/MMC interface, support SD card and MMC cardDC12V-24V, with isolated industrial electric boat case, higher reliabilityStructureplastic shellPanel size206.00x142.00 (mm)Hole Size195.60x131.60 (mm)NoticeWhen the serial port is connected, the GND ground of the two devices must be connected together to avoid burning the serial portchip and affecting the communication.  

7inch 800*480 All-in-one terminal Windows CE Embedded industrial touch screen with WIFI

NINGBO GIANT TIGER CO., LTD.

Pet Training Bells, Dog Puppy Pet Potty Training Bells, Communication Device Cat Interactive Toys Size:dia7.2*5CM Material:metal+plastic Weight:78g  

Pet Training Bells, Dog Puppy Pet Potty Training Bells, Communication Device Cat Interactive Toys

显和有限公司

20,000 mAh Fast Charging Power Bank with 3 Built-in Cables and Digital Display includes the following features : Features built-in type-c and lightning output cables on the backBuilt in USB cable as a hanging lanyardUSB input: 5V/2AType-c input: 5V/3A, 9V/2A, 12V/1.5AUSB-A output: 5V/3A, 5V/4.5A, 9V/2A, 12V/1.5AType-c output: 5V/3A, 9V/2.2A, 12V/1.5AType-c cable output: 5V/3A, 9V/2.2A, 12V/1.67ALightning cable output: 5V/2.1A22.5w super fast chargeCapacity of 20,000 mAhOperated by built-in 1 x 136074 batteryRechargeable by USB and type-c port (charging cable included)LED digital display accurately shows the remaining battery percentage, so you can always know how much power is left and when to rechargeWith a compact size and lightweight design, this power bank is easy to carry aroundCompatible with tablet and phoneMaterial : ABS and PC housingSize closed : Length of 12.4 cm x Width of 7 cm x Thickness of 3.15 cm

20,000 mAh Fast Charging Power Bank w/ 3 Built-in Cables & Digital Display

Shenzhen MicroNature Innovation Technology Co Ltd

Product Introduction MN-G60P three-phase rail gateway is an IoT gateway based on power line carrier communication (PLC) technology. It can be widely used in smart home, industrial lighting, stadium lighting and other fields. The gateway motherboard has a built-in complete object model. Through the instantiation of the object model, each gateway's downstream device can be a controller, sensor and control panel, as well as any combination of these devices. The gateway is a communication transmitter connecting it to the cloud big data. It has functions such as communication management, data transmission, protocol conversion, data processing and forwarding, which makes it convenient for users to understand, manage and control electrical equipment anytime and anywhere. Product Features Equipped with a PLC interface chip that complies with the IEEE P1901.1 standard, it can establish a communication link up to 1Mbps on 90V to 260V DC or AC power lines.Equipped with AllWinner V3s high-performance SoC, based on Linux kernel, complete PLC protocol stack.The gateway is equipped with 64MB of DDR2 RAM and 32MB of Flash, which can complete complex high-density computing. It is equipped with a PLC communication interface and an Ethernet interface, as well as an RS485 interface.Built-in WEB server, users can fully control the device and scene through the WEB server.Supports up to 256 terminal devices.Supports 64 scenes, and the scene linkage of the device is synchronized, with fast response speed and timely attribute update.Supports remote upgrade.Electrical Characteristics Debug Interfaface Dimension   SAAS Cloud Platform  

Power Line Communication PLC-IoT Three-phase Rail Gateway

4-in-1 Travel Plug Adapter includes the following features : Capacity of 10,000 mAhLED digital power displayDouble-sided acrylic mirror designFoldable AC plugBuilt-in data cable is provided on the side of the product, and the data cable has two connectors (type-c and lightning)Type-c input: DC5V-2.4A max PD20WAC plug input: 100-240V AC, 50 / 60Hz 0.4A MaxUSB output: DC4.5V-5A / 5V-4.5A / 5V-3A / 9V-2A / 12V-1.5A 22.5WBuilt-in lighting output: DC5V-2.4A MAXBuilt-in type-c output: DC4.5V-5A / 5V-4.5A / 5V-3A / 9V-2A / 12V-1.5A MaxType-c + USB + built-in cable: DC5V-3A MAXCE, FCC and Rohs compliantMaterial : PC and ABS housingSize closed : Length of 8.4 cm x Width of 8.2 cm x Thickness of 2.9 cm

4-in-1 Travel Plug Adapter

GPS Tracker includes the following features : Anti-theft positioningCharging input: InputAC110-220V50/60HzCharging output: OutputDC5.0V 300-500MaMachine battery: 3.7V 400mAh Li-ion batteryStandby time: 7 daysWorking time 4-6 daysExpansion card: mini TF cardContinuous call: 150-180 minutesNetwork mode: GSM/GPRDGSM positioning time: 25 secondsOperated with polymer batteryMaterial : ABS housingSize closed : Length of 3.5 cm x Width of 2 cm x Thickness of 1.4 cm

GPS Tracker

小未科技 (珠海) 有限公司

The ZigBee 3.0 Smart Gateway is a powerful IoT hub designed to connect and manage ZigBee smart devices through both 2.4GHz Wi-Fi and 10/100M Ethernet connections. Serving as the central controller of a smart home system, it enables seamless communication between ZigBee sensors, switches, lighting, security devices, and mobile applications, delivering a stable, reliable, and intelligent home automation experience. Supporting the ZigBee 3.0 protocol, the gateway provides excellent compatibility with a wide range of ZigBee devices and allows up to 128 sub-devices to be connected simultaneously, making it suitable for residential, commercial, hotel, office, and smart building applications. Users can choose either Wi-Fi or wired Ethernet networking according to different installation environments. The Ethernet connection offers enhanced stability, lower latency, and stronger anti-interference performance, making it ideal for projects requiring continuous and reliable communication. The gateway supports Bluetooth (BLE) provisioning for quick and easy network configuration, while remote OTA firmware upgrades ensure devices remain updated with the latest features and security improvements. Designed with an automatic recovery mechanism, the gateway performs a physical restart if abnormal operation is detected for more than three minutes, significantly improving long-term reliability and system stability. With its compact ABS housing and low power consumption, the gateway can be easily installed in homes, apartments, hotels, offices, retail stores, and smart community projects. It serves as the intelligent bridge connecting sensors, lighting, climate control, door locks, curtains, and other ZigBee-enabled devices into one unified smart ecosystem. Ideal for smart home brands, IoT solution providers, system integrators, distributors, telecom operators, and OEM/ODM projects. Key FeaturesZigBee 3.0 smart home gatewaySupports both Wi-Fi and wired Ethernet networkingConnects up to 128 ZigBee devicesBLE quick network provisioningRemote OTA firmware upgradeStable wired communication with RJ45 Ethernet portReliable ZigBee mesh networkingAutomatic abnormal operation recoveryCompact, low-power industrial designWide compatibility with ZigBee smart devicesEasy installation and deploymentOEM &amp; ODM customization supported

ZigBee 3.0 Smart Gateway with Wi-Fi & Ethernet | Wireless IoT Hub Supporting Up to 128 ZigBee Devices

2-in-1 Car Jump Starter &amp; Air Inflator includes the following features : Capacity of 37Wh (10,000 mAh/3.7V)LCD displayCharging specifications: DC5V/2A, 9V/2A (type-c)Charging time: 3-6 hoursUSB output: 5V/2A MaxStarter current: 600APeak current: 800AAuto 12V emergency starterPowerful USB power bankBuilt-in LED flashlight2 x Intelligent clampsSupports 12V system vehiclesGreat for engine with 5.0L gasoline vehicles &amp; 3.5L diesel vehiclesIntelligent relay wire clamp protection function: Working voltage detection, provides 4 types of protection - reverse charging, short circuit, reverse connection and temperature protectionAir pump: T-type 19-cylinder movementMaximum air pressure: 120psi±5psiRS390-17500 rpmMicro cable and type C cable includedAccessories: 1 x air pump power supply, 1 x charging cable, 1 x 4-piece adapter, 1 x starter battery clamp, 1 x manualMaterial : ABS plastic bodySize closed : Length of 8.96 cm x Width of 4.36 cm x Height of 22.1 cmWeight of 0.77 kgs

2-in-1 Car Jump Starter & Air Inflator

10,000 mAh Multi Built-in Cables Power Bank includes the following features : Mini-sized designInput: 1A/2.1AOutput: 1A/2.1ACapacity of 10,000 mAhPower indicator for battery statusBuilt-in USB input, lighting, type-c and micro charging cableOperated by 1 x 1260110 Li-polymer batteryCompatible with various mobile phonesMaterial : PC + ABS housingSize closed : Length of 14.5 cm x Width of 8.5 cm x Thickness of 2.2 cm

10,000 mAh Multi Built-in Cables Power Bank

Round-shaped Anti-lost Tracker includes the following features : Ultra-low power consumption 4.0 bluetooth chipAnti-lost alarm tracer functionFind objects with one click, open the APP to view the location and easily retrieve it according to the map locationOperated by 1 x CR2032 battery (210mAh)Standby time: 6 monthsWorking distance: 10-15 metersCertification: CE/ROHS/FCCCompatible with iOS and Android systemsSuitable for wallets, cars, pets, bags and other itemsMaterial : ABS housingSize closed : Diameter of 3.19 cm x Thickness of 0.9 cmWeight of 25 grams

Round-shaped Anti-lost Tracker

深圳市海曼科技股份有限公司

The Heiman S1-Z Z-Wave Smoke Alarm is designed for professional smart home systems, offering stable and low-power wireless communication. It enables seamless integration into Z-Wave networks, ensuring reliable device connectivity and long-term performance. The alarm provides accurate smoke detection and immediate alerts when danger is detected. Certified to UL217 10th edition and CAN/ULC-S531 standards, it meets stringent safety requirements. The S1-Z is ideal for smart home platforms, system integrators, and large-scale deployment projects.  Working Voltage：DC3V (EVE CR123A) Sensor Type：Photoelectric Alarm Sound Level：≥ 85dB at 10ft Temperature Range： 40℉ (4.4℃) to 100℉ (37.8℃) Humidity Range：≤ 95%RH (non-condensing) Alarm Sensitivity：1.9%/ft ± 0.33 %/ft OBS Dimensions：Φ70 x H37mm  Heiman is a professional manufacturer specializing in fire safety alarms and smart home sensors, with over 21 years of industry experience. Founded in Shenzhen, China, the company operates a dual manufacturing base in Shenzhen and Vietnam, with an annual production capacity of 15 million units. Heiman owns a CNAS ISO7025 accredited laboratory and an Intertek/ETL recognized satellite lab, ensuring strict quality testing and compliance. With over 1,000 patents and certifications, the company serves customers in more than 100 countries worldwide. Heiman provides one-stop OEM/ODM solutions, including industrial design, hardware and software development, cloud integration, and technical support, making it a reliable partner for global distributors and brands.                      

UL217 10th Certified Z-Wave Smoke Alarm with Low Power Smart Connectivity

Bluetooth Smart Watch with Coder includes the following features : Bluetooth-compatible: 5.0Battery capacity: 220 mAhLCD: 1.86Resolution: 240 x 280Support for Android 4.4 and ISO9.0 or aboveRechargeable with USB charging cableFunctions:- Bluetooth music- Step counter calorie- Counter distance- Sleep monitor, wrist sense notifications of incoming call- Text message- Find phone- Social mediasMaterial : ABS and TPU housingSize closed : Length of 4.3 cm x Width of 3.6 cm x Thickness of 0.98 cm

Bluetooth Smart Watch w/ Coder

5,000 mAh Wireless Solar Charger includes the following features : Capacity of 5,000 mAhLED SOS lightMagnetic wireless charging functionSolar panel - Monocrystalline silicon 5.5V10MALanyard design for easy portabilityWaterproof and dustproofInput: Micro - 5V / 2A or Type-C - 5V / 2AOutput: USB - 5V / 2A (wireless charging: 5v/1w)USB charging cable includedMaterial : ABS housing with silicone inlaySize closed : L 11 cm x W 6.8 cm x Thickness of 1.9 cmWeight of 175 grams

5,000 mAh Wireless Solar Charger

10 Pcs Universal-Tie Set includes the following features : Organize and secure mobile phones, cables, equipment, etc.2 of each size in different colorsMulti-purposeIncluded 2 carabiners for additionally fastening the tiesMaterial : Iron wire with TPU housingSize closed : Dia. 6.6 mm - 45 cm x 2 pcs; 30 cm x 2 pcsDia. 4.0 mm - 15 cm x 2 pcs; 8 cm x 2 pcsLarge carabiner - Length of 7.5 cmSmall carabiner - Length of 4 cm

10 Pcs Universal-Tie Set 

18,000 mAh Car Jump Starter includes the following features : 1 x Quality LED with 3 lighting modes (emergency light &gt; SOS &gt; strobe)Capacity of 18,000 mAhCurrent: 1,200ATYPE-C input: 5V/2AUSB output: 5V/2ACharging time: 3-4 hoursWorking temperature: -20°C ~ 60°CSmart display screenMain functions: start, inflate, charge and lightOther functions: emergency lighting, SOS rescue and digital chargingSuitable for starting various vehicles2 x Intelligent clampsMaterial : ABS housingSize closed : Length of 18.5 cm x Width of 8.5 cm x Thickness of 4 cm

18,000 mAh Car Jump Starter

5,600 mAh Battery Power Bank includes the following features : LED flashlightInput: 5V / 1.2AOutput: 5V / 1.2ASwitch buttonCompatible with mobile phones and tablets30 cm Charging cable includedMaterial : ABS housingSize closed : Length of 10 cm x Width of 2.25 cm

5,600 mAh Battery Power Bank

15,000 mAh Wireless Solar Power Bank with 20 LEDs includes the following features : 20 x White LED lighting bulbsInput (micro): DC 5V/2AOutput: DC 5V/1A (USB1); DC 5V/2A (USB2)Qi Wireless output: 5V/1AOperated by 15,000 mAh built-in batterySmart &amp; ergonomic design, easy to hold and useSolar panel makes it always keep charging for emergency2A charge / discharge current, up to 10WUSB charging cable includedMaterial : ABS housingMonocrystalline silicon solar panelSize closed : Length of 15.5 cm x Width of 8.5 cm x Thickness of 2.3 cm

15,000 mAh Wireless Solar Power Bank w/ 20 LEDs

Smart Watch with Fitness Tracker includes the following features : Bluetooth version: 4.2Battery: 55 mAhLCD: 1.30Resolution: 128 x 128APP: FitproAndroid 5.0 and ISO9.0 or aboveRechargeable with USB charging cableFunctions:- Step counter calorie- Counter distance- Sleep monitor, wrist sense notifications of incoming call- Text message- Social mediasMaterial : ABS and TPU housing

Smart Watch w/ Fitness Tracker

Children's Toy Walkie Talkie includes the following features : AntennaLED lightSpeakerBacklit LED screensRF output power: 0.5WMicrophonePower buttonLamp buttonCall buttonPTT buttonChannel scanCommunicate with friends through 3 channelsOutdoor toys for kids have a 5 km rangeOperated by rechargeable Ni-MH batteryUSB charging functionFrequency range: 400-470 (MHz)Theoretical battery life: 24 hoursUSB charging cable includedMaterial : ABS housing with SAN lensSize closed : Length of 3.1 cm x Width of 2.8 cm x Height of 14 cm

Children's Toy Walkie Talkie

5,000 mAh Magnetic Power Bank includes the following features : TYPE-C input: 18WTYPE-C output: 22.5WUSB-A output: 5V/3A, 9V/2A, 12V/1.5A, 4.5V/5A, 5V/4.5AWireless charging output: 5W/7.5W/10W/15W MaxBattery capacity: 5,000 mAhRated capacity: 3,000 mAhTransparent explosion-proof tempered film screen15w wireless fast charge + 22.5w super fast chargeFolding bracket on the backUSB charging cable includedMaterial : Plastic housingSize closed : Length of 9 cm x Width of 6.3 cm x Thickness of 1.9 cmWeight of 200 grams

5,000 mAh Magnetic Power Bank

20,000 mAh Fast Charging Power Bank with Built-in Cables includes the following features : Capacity of 20,000 mAh2 x LED bulbs for lightingType-c input: 5V/3A, 9V/2A, 12V/1.5AMicro input: 5V/2A, 9V/2A, 12V/1.5AType-c output: 5V/3A, 9V/2.2A, 12V/1.6AUSB output: 4.5V/5A, 5V/3A, 9V/2A, 12V/1.5ASupport 66W fast chargingSmart digital display for battery statusBuilt-in USB input, lighting and type-c charging cableOperated by 1 x 1260110 Li-polymer batteryCompatible with various mobile phonesMaterial : PC and ABS housingSize closed : Length of 14.6 x Width of 6.9 cm x Thickness of 1.7 cm

20,000 mAh Fast Charging Power Bank with Built-in Cables

10,000 mAh Magnetic 15w Fast Charging Power Bank with Dual Built-in Cables includes the following features : Features built-in type-c and lightning output cablesTYPE-C input: 18WTYPE-C output: 18WUSB-A output: 5V/4.5A, 9V/2A, 12V/1.5ABattery capacity: 10,000 mAhRated capacity: 6,000 mAhPowered by Li-polymer battery15W Fast charging, bidirectional outputThe LED digital display accurately shows the remaining battery percentage, so you can always know how much power is left and when to rechargeWith a compact size and lightweight design, this power bank is easy to carry aroundIt can easily fit into your pocket or backpack, making it perfect for on-the-go chargingCompatible with tablet and phoneMaterial : PC and ABS housingSize closed : Length of 11.2 cm x Width of 7 cm x Thickness of 19.6 cmWeight of 185 grams

10,000 mAh Magnetic 15w Fast Charging Power Bank w/ Dual Built-in Cables

10,000 mAh Wireless Power Bank with Phone Stand includes the following features : Wireless charging: 5V/1AInput type-c: DC 5V/2.4AMicro: DC 5V/2AOutput USB1: DC 5V/1AOutput USB2: DC 5V/2AOperated by 10,000 mAh built-in batteryWidely used for all kinds of Qi enabled wireless charging devicesWith phone holder function, release your hands3 Input/output ports: Type-c, micro &amp; USB1W LED lamp for lightingHigh transmit efficiency, no heat during useMulti-level protection design, more safetyUSB charging cable includedMaterial : ABS housingSize closed : Length of 17.3 cm x Width of 8.7 cm x Thickness of 1.6 cm

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?