港照照明科技有限公司

This RGBW+IC / RGBY + IC (external) dream strip light is a four channel LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM to TM1814. When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc. Internal VDD pin is integrated with 5V regulator with less peripheral devices, which applies to guardrail tube, point source and LED decorative products.
5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor constant current can achieve level 64 adjustment (6.5 mA-38mA) ,PWM brightness controls circuit, and 256 gray scale is adjustable, internal control mode chip sends 2048 points of data.
The KL590 IC appearance is same as 5050 LED which can achieve a consistent and attractive appearance.

3 working input voltages are available:&nbsp; 	 5 VDC version (1 KL590IC (external) +1 5050 RGBW or 5050 RGBY LED. 	 12 VDC version (1 KL590IC (external)+ 3 5050 RGBW or 5050 RGBY LED). 	 24 VDC Version &nbsp; (1 KL590IC (external) + 6 5050 RGBW or 5050 RGBY LED).  
KL590RGBW + IC / KL590RGBY+ IC dream flex-strip light 60LEDs/meter (5V version): 	 Working voltage: DC5V. 	 LED quantity: 60LEDs/M. 	 LED type: SMD5050. 	 Quantity: 60pieces KL590IC + 60 pieces 5050 RGBW/ Y LEDs. 	 Pixel quantity: 60pixels/m. 	 PCB color: white color. 	 Power consumption: max 24W/M 	 Gray scale level: 256 levels&nbsp; 	 Emitting color: r: 620-630nm, G:515-525nm, B:460-475nm, Y:580-590nm. 	 White light: CW: 6000-6500K, NW: 3950-4200K, WW: 2800-3200K, WL: 2400-2700K. 	 Cri: Ra &gt; 80.  &nbsp;
KL590RGBW + IC / KL590RGBY+ IC dream flex-strip light 60LEDs/m (12V version): 	 Working voltage: DC12V. 	 LED quantity: 60LEDs/M. 	 LED type: SMD5050. 	 Quantity: 20pieces KL590 IC + 60 pieces 5050RGBW/Y LEDs. 	 Pixel quantity: 20pixels/m. 	 PCB color: white color. 	 Power consumption: max 19.2 W/M. 	 Gray scale level: 256 levels. 	 Emitting color: R: 620-630nm, G: 515-525nm, B: 460-475nm, Y: 580-590nm. 	 White light: CW: 6000-6500K, NW: 3950-4200K, WW: 2800-3200K, WL: 2400-2700K. 	 Cri: Ra &gt; 80.  &nbsp;
KL590RGBW + IC / KL590RGBY+ IC dream flex-strip light 60LEDs/meter (24V version): 	 Working voltage: DC24V. 	 LED quantity: 60LEDs/M. 	 LED type: SMD5050. 	 Quantity: 10pieces KL590IC + 60pieces 5050RGBW/Y LEDs. 	 Pixel quantity: 10pixels/m.  

LED Strip Light

KL592 (RGB IC) : with constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inuts one group of data set by constant current and PWM.&nbsp; 	 5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor 	 Constant current can achieve 18 MA 	 PWM brightness controls circuit, and 256 brightness is adjustable 	 Single line serial concatenated port 	 Oscillation mode: build in RC vibration and conduct clock synchronization according to signals&nbsp; on data line. After receiving the data from this unit, it can reproduce follow-up data and send it &nbsp;to lower level through data output end, and signals will not be distorted and reduced along with cascade 	 Build in power on reset circuit, and after powering on reset, an registers are initialized to zero 	 External control mode data transmission rate is 800 KHZ 	 Internal control mode chip sends 2048 points of data  &nbsp; Benefits:  	 Comparing with&nbsp;the traditional&nbsp;RGB color, hence,&nbsp;the screen&nbsp;colors look&nbsp;is&nbsp;moredetails, bringing immense visual &nbsp;real color appeal,&nbsp;the quality light is available in different RGB colors. The LED lighting product can be adopted to upgrade your existing strip lights.  
Features:
Voltage: 5V, W: 0.3W
R: 620-630 nm, 2-2.5lm/ 18mA
G: 515-525 nm, 5-6 lm/ 18mA
B: 460-470 nm, 1-1.5 lm/ 18mA

Lens Type:&nbsp; Water Clear
Available in RGB different colour
&nbsp;
Applications:
Upgrade to New RGB Light LED strip light.
Applies to guardrail tube, point source and LED decorative products.&nbsp;
Full color&nbsp; Indoor/Outdoor decoration light

Material:
Package: Top SMD

5050RGB IC LED

深圳民爆光电股份有限公司

LED fireproof downlight(DL294) AC220-240V, 6W, IP65, IP40, IP20 36°, 60° beam angle 3000K, 4000K, 5000K, 5700K This lamp adopts fireproof bracket and aluminium heat sink, which not only meets the fireproof structure demand but also offers a good heat dissipation performance. It adopts high lumen SMD light source and optic lens with uniform light output. Four cover options: white, black, silver and nickel brushed. What’s more, the cover is fixed by magnetic design, and it has a hidden slide switch for CCT, convenient for CCT change and cover change. - Group design:Type A slim body, Type B deep design with anti-glare effect, Type C Gyro 360degree. - Fireproof: 30Min/60Min/90Min. - IP65 in front part. - Type A &amp; Type B with replaceable cover by magnetic design. - Front slide switch (Type A&amp;B), back slide switch (Type C) for interchangeable CCT. - Flicker free driver with a 6 bit quick connector inside, screwless cord grip design. - IC approved, can be covered directly under insulation material. - Triac dimming. It is designed for general lighting applications in supermarket, shop, hotel, home etc. 

LED fireproof indoor&outdoor downlight

Model no. KL591 (5050RGBYIC LED)
KL591 (RGBYIC LED ) is four channels LED constant current adjustable driver IC with function of internal control synchronizing, which can achieve a wide range of display as MCU inputs one group of data set by constant current and PWM .
When input signal is disconnected, it can realize synchronized fixation of colorful pattern change and prevent in-operation of subsequent cascade chip caused by chip damage. Internal chip is integrated with MCU solidification program and single wire digital interface, data flip-latch, LED constant current driver, circuit, etc.
Internal VDD pin is integrated with 5V regulator with less peripheral devices.
Adopt power CMOS technology
5 V voltage-regulator tube is built into VDD, and the voltage supports 6-24 V after cascading the resistor
Constant current can achieve level 64 adjustment (6.5 mA-38mA)
PWM brightness controls circuit, and 256 brightness is adjustable
Accurate current output value
Single line serial concatenated port
Oscillation mode: build in RC vibration and conduct clock synchronization according to signals&nbsp; on data line. After receiving the data from this unit, it can reproduce follow-up data and send it &nbsp;to lower level through data output end, and signals will not be distorted and reduced along with cascade
Build in power on reset circuit, and after powering on reset, an registers are initialized to zero
External control mode data transmission rate is 800 KHZ
Internal control mode chip sends 1024 points of data&nbsp;
In addition to&nbsp;the existing&nbsp;16777216&nbsp;color, an additional color &quot;yellow Y&quot; has been added in&nbsp;the traditional&nbsp;RGB color,&nbsp;widening the&nbsp;entire&nbsp;gamut, makingLed&nbsp;can be more&nbsp;vividly&nbsp;yellow&nbsp;gold,&nbsp; the color is more realistic comparing with&nbsp;the traditional&nbsp;RGB RGB&nbsp;color, hence,&nbsp;the screen&nbsp;colors look&nbsp;is&nbsp;moredetails, bringing immense visual &nbsp;real color appeal,&nbsp;the quality light is available in different RGBY colors. The LED lighting product can be adopted to upgrade your existing strip lights.
Features:
Voltage: 5V, W: 0.4W
R: 620-630 nm, 2-3 lm/ 16mA
G: 515-525 nm, 6-7 lm/ 16mA
B: 460-470 nm, 1-2 lm/ 16mA
Y: 585-595 nm, 2-3 lm/ 16 mA
&nbsp;
Lens Type:&nbsp; Water Clear
Available in RGBY different colour
&nbsp;
Applications:
Upgrade to New RGBY Light LED strip light.
Applies to guardrail tube, point source and LED decorative products.&nbsp;
Full color&nbsp; Indoor/Outdoor decoration light

Material:
Package: Top SMD

&nbsp;

5050RGBY IC LED

Xiamen Simons Lighting Co Ltd

Features 1. High output COB LED chip, beam angle 38 degree standard, optional 15 degree, 24 degree 2. The bracket mechanism ensures optimum tilting function 60º (-15º~ +45º) and rotating 340º 3. Die-casting aluminum materials on this gimbal smart downlight, excellent heat dissipation, the power for this 90mm cut-out gimbal smart downlight can be up to 15W, IC-4 rated. 4. Colour temperature of this smart downlight is optional to be CCT, RGB, RGBW, application to accent lighting. 5. You can change the colour temperature of the light to change the atmosphere of your home. 6. Group control, can control multiple lights at the same time and also can control the light and other household electrical appliances together. 7. According to WIFI remote, you can controlled your smart downlight through your phone from anywhere. 8. Excellent dimming performance, dim from 5% to 100% fluently. 9. SAA, C-tick, CE approved. The colour and brightness of the downlight can be adjusted through the app, smart downlight will make our life more colourful and brighter. Set the different colour of the different scene on your house, office, party, shop etc.  Spec &amp; Models Technical Parameter Input Voltage200V-240VCRI (Ra&gt;)80,90Power Factor&gt;0.9Working Frequency50/60HZPower10W, 12W, 15WCut Out90mmDiameter102mmHeight80mmTemperature-20～50℃Lifetime30000hIP RatingIP20MaterialsDie-casting AluminumLight SourceLEDLED ChipCOBCCTCW, RGB, RGBWBeam Angle15/24/38°FasciaFlatInstallationRecessedControlTuya app, Alexa, Google Home, Siri voice, Remote ControllerFunctionsCCT/ Light colour change, Scene Model Setting, Wake up, Time setting, Group ControlModels  Model Power Colour Temperature Communication protocol ways DL05-03-12-CW-WI 12W 3000K-5000K Wifi DL05-03-12-CW-WI+BL 12W 3000K-5000K Wifi+Bluetooth DL05-03-12-CW-BLM 12W 3000K-5000K Bluetooth Mesh DL05-03-12-CW-ZIG 12W 3000K-5000K Zigbee DL05-03-12-RGB-WI 12W RGB Wifi DL05-03-12-RGB-WI+BL 12W RGB Wifi+Bluetooth DL05-03-12-RGB-BLM 12W RGB Bluetooth Mesh DL05-03-12-RGB-ZIG 12W RGB Zigbee DL05-03-12-RGBW-WI 12W RGB+3000K/4000K/5000K Wifi DL05-03-12-RGBW-WI+BL 12W RGB+3000K/4000K/5000K Wifi+Bluetooth DL05-03-12-RGBW-BLM 12W RGB+3000K/4000K/5000K Bluetooth Mesh DL05-03-12-RGBW-ZIG 12W RGB+3000K/4000K/5000K Zigbee DL05-03-12-RGBCW-WI 12W RGB+3000K~5000K Wifi DL05-03-12-RGBCW-WI+BL 12W RGB+3000K~5000K Wifi+Bluetooth DL05-03-12-RGBCW-BLM 12W RGB+3000K~5000K Bluetooth Mesh DL05-03-12-RGBCW-ZIG 12W RGB+3000K~5000K Zigbee 

Smart LED Downlight

Features 1. The material of this smart downlight is plastic cover aluminum downlight, high thermal conductive PC, excellent heat dissipation, can up to 12W and great replace die-casting aluminum downlight you had, IC-4 rated. 2. The functions of this smart light can be easily customized by end-customers through the app. 3. This smart light can be customized to be controlled by app, smart audio, siri voice, dimmer board, remote controller etc. 4. High light transparency, the lumens efficiency of CW can be up to 100lm/w. 5. Excellent dimming performance, dim fluently from 1% to 100%. 6. Colour temperature of this smart light is optional to be CW, RGB, RGBW, RGBCW. Users can set different scene mode according to different occasions, choose different colour and scenes. 7. Convenience voice control, help you become a conductor of lights. 8. Wireless wifi control and remote control without the limitations of the distance. 9. The smart light has multi communication protocol ways, wifi, wifi+blue, bluetooth mesh. 10. Approved with SAA, C-tick, CE. Scene setting and selection: Choose different scene and modes according to different places, different modes.  16 million colors can be easily constructed  High thermal conductive plastic materials of housing, excellent heat dissipation, the power can be up to 12W, it can replace the die-casting aluminum light what you are using now.  Easy to be installed 1. Scan the QR to download the app 2. Install the lamp and switch the smart light in quickly flashing 3. Connect smart light to App under a WIFI network.  SPEC &amp; MODELS Technical Parameter Input Voltage200V-240VCRI (Ra&gt;)80,90Power Factor&gt;0.9/&gt;0.5Working Frequency50/60HZPower10W, 12WCut Out90mmDiameter108mmHeight40mm/ 48mmTemperature-20～50℃Lifetime30000hIP RatingIP20MaterialsPlastic cover aluminumLight SourceLEDLED ChipSMD 2835CCTCW, RGBCW, RGB, RGBWBeam Angle90°FasciaRecessed/ FlatInstallationRecessedControlTuya app, Alexa, Google Home, Siri voice, Remote ControllerFunctionsCCT/ Light colour change, Scene Model Setting, Wake up, Time setting, Group Control 

Features 1. Gimbal fascia of the light, each to be adjusted on 45º. 2. The CCT of the light can be RGB, RGBW, RGBCW, CCT, set the color temperature based on the atmosphere you need. 3. Plastic cover aluminum materials, high cost effective, excellent heat dissipation, IC-4 rated. 4. Built-in driver, integrated housing, elegant appearance. 5. Easy to be installed, with the AU plug, only need to plug it and then connect to the devices. 6. The functions of the light can be customized by yourselves on the app. 7. 90mm cut-out, suitable for most of the housing application. 8. Support group control, free combination on demand 9. This smart light has 3 communication protocol ways to be customized, wifi, wifi+bluetooth, blue mesh, zigbee. 10. SAA, C-tick, CE approved. This smart downlight can be controlled by app, smart audio, light sensor, remote controller, switch dimmer etc. And also some of the devices can be used together to control this light. This smart light can be controlled in any places: you can turn it on before you get home.  Easy to be installed 1. Scan the QR to download the app 2. Install the lamp and switch the smart light in quickly flashing 3. Connect smart light to App under a WIFI network.  Spec &amp; Models Technical Parameter Input Voltage200V-240VCRI (Ra&gt;)80,90Power Factor&gt;0.9/&gt;0.5Working Frequency50/60HZPower5W, 8WCut Out90mmDiameter105mmHeight65mmTemperature-20～50℃Lifetime30000hIP RatingIP20MaterialsPlastic cover aluminumLight SourceLEDLED ChipSMD 2835CCTCW, RGBCW, RGB, RGBWBeam Angle40°FasciaGimbalInstallationRecessedControlTuya app, Alexa, Google Home, Siri voice, Remote ControllerFunctionsCCT/ Light colour change, Scene Model Setting, Wake up, Time setting, Group Control Models  Model Power Colour Temperature Communication protocol ways DL02-03-08-CW-WI-F 8W 3000K-5000K Wifi DL02-03-08-CW-WI+BL-F 8W 3000K-5000K Wifi+Bluetooth DL02-03-08-CW-BLM-F 8W 3000K-5000K Bluetooth Mesh DL02-03-08-CW-ZIG-F 8W 3000K-5000K Zigbee DL02-03-08-RGB-WI-F 8W RGB Wifi DL02-03-08-RGB-WI+BL-F 8W RGB Wifi+Bluetooth DL02-03-08-RGB-WI-F 8W RGB Wifi DL02-03-08-RGB-WI+BL-F 8W RGB Wifi+Bluetooth DL02-03-08-RGBW-WI-F 8W RGB+3000K/4000K/5000K Wifi DL02-03-08-RGBW-WI+BL-F 8W RGB+3000K/4000K/5000K Wifi+Bluetooth DL02-03-08-RGBW-WI-F 8W RGB+3000K/4000K/5000K Wifi DL02-03-08-RGBW-WI+BL-F 8W RGB+3000K/4000K/5000K Wifi+Bluetooth DL02-03-08-RGBCW-WI-F 8W RGB+3000K~5000K Wifi DL02-03-08-RGBCW-WI+BL-F 8W RGB+3000K~5000K Wifi+Bluetooth DL02-03-08-RGBCW-WI-F 8W RGB+3000K~5000K Wifi DL02-03-08-RGBCW-WI+BL-F 8W RGB+3000K~5000K Wifi+Bluetooth 

Smart Gimbal LED Downlight

Features 1. Die-casting aluminum downlight, excellent heat dissipation, IC-4 rated. 2. Colour temperature is optional to be CCT, RGB, RGBW, RGBCW on this smart downlight. 3. Integrated housing design, elegant appearance. 4. 4 Multi communication protocol ways can be customized on this smart downlight, wifi, wifi+bluetooth, bluetooth mesh, zigbee. 5. Support group control, one mobile phone can control multiple lights at the same time. 6. You can share the smart downlight to your family through the app, multiple phones can control one lights. 7. Cut-out is 90mm, suitable for most of the building. 8. Excellent dimming performance, dim from 5% to 100% fluently. 9. You can control your home smart downlight from anywhere. 10. Personalize this smart downlight with a colour palette of over 16 million colours and different tones of white light from dark to bright. 11. High light transparency, high light output, the lumen efficiency can be up to 100lm/w. 12. SAA, C-Tick, CE aprroved. Intelligent voice control, using voice to control lighting. Through Amazon Echo, Google Home, IFTTT voice control, make your family life more comfortable.    Mobile app to adjust brightness. According to your different needs, you can adjust the brightness through the mobile app to get a better viewing experience.   Easy to be installed   Spec &amp; Models Technical Parameter Input Voltage200V-240VCRI (Ra&gt;)80,90Power Factor&gt;0.9/&gt;0.5Working Frequency50/60HZPower10W, 12WCut Out90mmDiameter108mmHeight30mmTemperature-20～50℃Lifetime30000hIP RatingIP20MaterialsPlastic cover aluminumLight SourceLEDLED ChipSMD 2835CCTCW, RGBCW, RGB, RGBWBeam Angle90°FasciaFlatInstallationRecessedControlTuya app, Alexa, Google Home, Siri voice, Remote ControllerFunctionsCCT/ Light colour change, Scene Model Setting, Wake up, Time setting, Group ControlModels  Model Power Colour Temperature Communication protocol ways DL04-03-12-CW-WI 12W 3000K-5000K Wifi DL04-03-12-CW-WI+BL 12W 3000K-5000K Wifi+Bluetooth DL04-03-12-CW-BLM 12W 3000K-5000K Bluetooth Mesh DL04-03-12-CW-ZIG 12W 3000K-5000K Zigbee DL04-03-12-RGB-WI 12W RGB Wifi DL04-03-12-RGB-WI+BL 12W RGB Wifi+Bluetooth DL04-03-12-RGB-BLM 12W RGB Bluetooth Mesh DL04-03-12-RGB-ZIG 12W RGB Zigbee DL04-03-12-RGBW-WI 12W RGB+3000K/4000K/5000K Wifi DL04-03-12-RGBW-WI+BL 12W RGB+3000K/4000K/5000K Wifi+Bluetooth DL04-03-12-RGBW-BLM 12W RGB+3000K/4000K/5000K Bluetooth Mesh DL04-03-12-RGBW-ZIG 12W RGB+3000K/4000K/5000K Zigbee DL04-03-12-RGBCW-WI 12W RGB+3000K~5000K Wifi DL04-03-12-RGBCW-WI+BL 12W RGB+3000K~5000K Wifi+Bluetooth DL04-03-12-RGBCW-BLM 12W RGB+3000K~5000K Bluetooth Mesh DL04-03-12-RGBCW-ZIG 12W RGB+3000K~5000K Zigbee 

Features: 1. 4 sizes can be chosen 2. Optional to done CCT, RGB, RGBW, RGBCW 3. Optional to be controlled by app, smart audio, switch dimmer, remote controller, motion/ light sensor. 4. High output, the lumen efficiency can be up to 100lm/w. 5. Excellent dimming performance, can match leading edge, trailing edge, universal dimmers. 6. Optional to choose different communication protocol ways, wifi, bluetooth, wifi+ bluetooth,bluetooth mesh (SIG), zigbee. 7. This smart downlight is easy to be installed, with 0.8m AC cable and plug. With tuya smart model, easier to connect the light with your devices. 8. Wireless, don’t need to install any network wires on the light. 9. Approved with SAA, C-Tick, CE. Integrated design, internal driver, elegant appearance on the light. High thermal conductivity plastics materials is used on this light, excellent heat dissipation and high cost effective, IC-4 rated.  You can customized the function of the lights on the app including dimming 1~100%, CCT change, colour change, scene setting, music sync, timing setting, random timing, sleep and wake up, rhythms, power memory.  Easy to be installed with the plug. And you can control each light individually or together as a group. One device can one button control few different lights.  SPEC &amp; MODELS Technical Parameter Input Voltage200V-240VCRI (Ra&gt;)80,90Power Factor&gt;0.5/ &gt;0.9Working Frequency50/60HZPower5W, 8WCut Out90mmDiameter115mmHeight55mmTemperature-20～50℃Lifetime30000hIP RatingIP44MaterialsPlastic cover aluminumLight SourceLEDLED ChipSMD 2835CCT3000~5000K, RGB, RGB+3000K/ 4000K/ 5000K, RGB+ 3000~5000KBeam Angle100°Light ColorNatural/ warm/ coldInstallationRecessed Models Model Power Colour Temperature Communication protocol ways DL01-03-08-CW-WI 8W 3000K-5000K Wifi DL01-03-08-CW-WI+BL 8W 3000K-5000K Wifi+Bluetooth DL01-03-08-CW-BLM 8W 3000K-5000K BluetoothMesh DL01-03-08-CW-ZIG 8W 3000K-5000K Zigbee DL01-03-08-RGB-WI 8W RGB Wifi DL01-03-08-RGB-WI+BL 8W RGB Wifi+Bluetooth DL01-03-08-RGB-WI 8W RGB Wifi DL01-03-08-RGB-WI+BL 8W RGB Wifi+Bluetooth DL01-03-08-RGBW-WI 8W RGB+3000K/4000K/5000K Wifi DL01-03-08-RGBW-WI+BL 8W RGB+3000K/4000K/5000K Wifi+Bluetooth DL01-03-08-RGBW-WI 8W RGB+3000K/4000K/5000K Wifi DL01-03-08-RGBW-WI+BL 8W RGB+3000K/4000K/5000K Wifi+Bluetooth DL01-03-08-RGBCW-WI 8W RGB+3000K~5000K Wifi DL01-03-08-RGBCW-WI+BL 8W RGB+3000K~5000K Wifi+Bluetooth DL01-03-08-RGBCW-WI 8W RGB+3000K~5000K Wifi DL01-03-08-RGBCW-WI+BL 8W RGB+3000K~5000K Wifi+Bluetooth 

Smart Downlight

Navior Technology Co., Ltd.

This Bluetooth smart remote controller is designed for the iPhone 4S, iPhone 5, iPad 3, iPad 4 and iTouch 5. It is professionally engineered to ensure stable and reliable performance. The robust structure ensures a long service life.
 
  Bluetooth smart remote controller and bi-directional anti-lost alarm. 
  Bluetooth 4.0 (Bluetooth low energy, BLE). 
  Compatible smartphone: iPhone 4S, iPhone 5, iPad 3, iPad 4 and iTouch 5. 
  Compatible OS: iOS. 
  iOS app: Navior-iC (free download). 
  Remote control iPhone/iPad/iTouch to take photos or video remotely. 
  Easily to take group photos with friends and families. 
  Up to 15 continuous shooting in minutes, to keep all your happiness and the best photos you like. 
  Share photos with friends via weibo/Facebook or mail directly. 
  Any pose you like is possible now. 
  Care your favorite items, the iPhone/iPad iC connect with the iPhone/iPad wirelessly via Bluetooth. 
  Low energy 4.0 protocol. 
  In 30 feet connection safe range, the iPhone/iPad dashboard will track up to 5 items with the iC, to call and find them by a trigger alarm, for example, to find a TV remote controller at home. 
  If the iPhone/iPad or item bind with the iC is out of safe range, Bluetooth connection break, both the iPhone/iPad and the iC will sound alarm to alert you. 
  Last seen &ndash; a bad case, item bind with the iC lost, Navior-iC app will pin point the last seen location and time of iC in a map. 
  GPS and cloud service &ndash; a bad case, if the iPhone or iPad lost, Navior-iC app will track GPS location of the iPhone/iPad and send mail to your configured mail box continuously for retrieve. 
  GPS location: track accurate GPS location of the last seen iC or all GPS location records of the iPhone/iPad for retrieve. 
  Ultra low power consumption: iC Lite 1 button battery standby over half year, iC pro/classic 1 button battery standby over 3 months. 
  Input: 1 press button to remote control the iPhone/iPad take photos, or call an iPhone/iPad alarm, 1 button battery cover. 
  Output: 1 LED light and 1 buzzer. 
  Weight: 14g. 
  Color and design: gorilla glass round with anodized aluminum alloy, pure black color and white color, twelve constellations for your choice, perfectly match the iPhone/iPad. 
  Apple funs will pursue for their fashion design. 
  Charger: microUSB charger, standby for 3 months. 
  Certification: FCC, CE and RoHS. 
 

Bluetooth Smart Remote Controller

This is a Bluetooth smart remote controller that is designed for the iPhone 4S, iPhone 5, iPad 3, iPad 4 and iTouch 5. It comes with a candy-like design in bright colors for an eye-catching look. It is professionally engineered to ensure stable and reliable performance.
 
  Bluetooth smart remote controller and bi-directional anti-lost alarm. 
  Bluetooth 4.0 (Bluetooth low energy, BLE). 
  Compatible smartphone: iPhone 4S, iPhone 5, iPad 3, iPad 4 and iTouch 5. 
  Compatible OS: iOS. 
  iOS app: Navior-iC (free download). 
  Remote control iPhone/iPad/iTouch to take photos or video remotely. 
  Easily to take group photos with friends and families. 
  Up to 15 continuous shooting in minutes, to keep all your happiness and the best photos you like. 
  Share photos with friends via weibo/Facebook or mail directly. 
  Any pose you like is possible now. 
  Care your favorite items, the iPhone/iPad iC connect with the iPhone/iPad wirelessly via Bluetooth. 
  Low energy 4.0 protocol. 
  In 30 feet connection safe range, the iPhone/iPad dashboard will track up to 5 items with the iC, to call and find them by a trigger alarm, for example, to find a TV remote controller at home. 
  If the iPhone/iPad or item bind with the iC is out of safe range, Bluetooth connection break, both the iPhone/iPad and the iC will sound alarm to alert you. 
  Last seen &ndash; a bad case, item bind with the iC lost, Navior-iC app will pin point the last seen location and time of iC in a map. 
  GPS and cloud service &ndash; a bad case, if the iPhone or iPad lost, Navior-iC app will track GPS location of the iPhone/iPad and send mail to your configured mail box continuously for retrieve. 
  GPS location: track accurate GPS location of the last seen iC or all GPS location records of the iPhone/iPad for retrieve. 
  Ultra low power consumption: iC Lite 1 button battery standby over half year, iC pro/classic 1 button battery standby over 3 months. 
  Input: 1 press button to remote control the iPhone/iPad take photos, or call an iPhone/iPad alarm, 1 button battery cover. 
  Output: 1 LED light and 1 buzzer. 
  Size: 35mm (D), 12mm (T). 
  Weight: 7g. 
  Material: PC. 
  Color and design: candy-like design, 8 colors for your choice. 
  Charger: 1 CR2032 button battery standby by for 3 months. 
  Certification: FCC, CE and RoHS. 
  Color: white, black, blue, red, green, pink, silvery and golden. 
 

This Bluetooth smart remote controller comes with a stylish and elegant appearance. It is designed for the iPhone 4S, iPhone 5, iPad 3, iPad 4 and iTouch 5. This Bluetooth smart remote controller is manufactured under strict QC to ensure reliable quality.
 
  Navior iC classic Bluetooth smart remote controller and bi-directional anti-lost alarm. 
  Bluetooth 4.0 (Bluetooth low energy, BLE). 
  Compatible smartphone: iPhone 4S, iPhone 5, iPad 3, iPad 4 and iTouch 5. 
  Compatible OS: iOS. 
  iOS app: Navior-iC (free download). 
  Remote control iPhone/iPad/iTouch to take photos or video remotely. 
  Easily to take group photos with friends and families. 
  Up to 15 continuous shooting in minutes, to keep all your happiness and the best photos you like. 
  Share photos with friends via weibo/Facebook or mail directly. 
  Any pose you like is possible now. 
  Care your favorite items, the iPhone/iPad iC connect with the iPhone/iPad wirelessly via Bluetooth. 
  Low energy 4.0 protocol. 
  In 30 feet connection safe range, the iPhone/iPad dashboard will track up to 5 items with the iC, to call and find them by a trigger alarm, for example, to find a TV remote controller at home. 
  If the iPhone/iPad or item bind with the iC is out of safe range, Bluetooth connection break, both the iPhone/iPad and the iC will sound alarm to alert you. 
  Last seen &ndash; a bad case, item bind with the iC lost, Navior-iC app will pin point the last seen location and time of iC in a map. 
  GPS and cloud service &ndash; a bad case, if the iPhone or iPad lost, Navior-iC app will track GPS location of the iPhone/iPad and send mail to your configured mail box continuously for retrieve. 
  GPS location: track accurate GPS location of the last seen iC or all GPS location records of the iPhone/iPad for retrieve. 
  Ultra low power consumption: iC Lite 1 button battery standby over half year, iC pro/classic 1 button battery standby over 3 months. 
  Input: 1 press button to remote control the iPhone/iPad take photos, or call an iPhone/iPad alarm, 1 button battery cover. 
  Output: 1 LED light and 1 buzzer. 
  Weight: 34g. 
  Color and design: gorilla glass front panel, uni-body aluminum alloy back panel, same size as a name card and a super thin design fit for your wallet or pocket. 
  Pure black color and white color, twelve constellations for choice, perfectly match the iPhone/iPad. 
  Apple funs will pursue for their fashion design. 
  Charger: microUSB charger, standby for 3 months. 
  Certification: FCC, CE and RoHS. 
 

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?