MGM Industries & Company

Application: *PH-10S, 20S, 30S: suitable for measuring the liquids. *PH-10F, 20F, 30F: suitable for measuring the semisolid substances. *PH-10L, 20L, 30L: suitable for measuring the small volume samples. *PH-40 is suitable for connecting with the various pH electrodes.  PH-10/20 Features: *2 points push-button calibration with auto-buffer recognition. *Hold function freezes current measured value for easy viewing and recording. *Auto-Power Off helps user effectively conserve battery life. *Replaceable electrode module reduces maintenance and replacement cost.  PH-30/40 Features: *BNC connector is easy to connect a variety of pH electrodes (Only for PH-40). *1 to 3 Points calibration with automatic recognition for USA and NIST buffers. *Automatic temperature compensation ensures accurate readings over the entire  range (Only for PH-30); Manual temperature compensation provides a wide range  of temperature input (Only for PH-40). *Auto-Read function senses and locks the measurement andpoint *Setup menu allows setting the pH buffer set, number of calibration points,  temperatureunit, auto-power off, stc. *Reset function automatically resumes all settings back to the factory defaults.   

Pocket pH /ºC/ºF Tester

PHS-25CW/3BW Features: *Economical benchtop pH meter is equipped with a white backlit LCD display. *Automatic electrode slope display helps user decide whether to replace sensor. *Automatic Temperature Compensation ensures accurate measuring recult. *2 points push-button calibration with auto-buffer recognition. PH-210 Features: *1 to 3 points calibration with automatic recognition for USA and NIST buffers. *Automatic electrode diagnosis helps user decide whether to replace the pH electrode. *Automatic temperature compensation ensures accurate readings over the entire range. *Auto-Read funstion senses and locks the measurement endpoint. *Setup menu allows setting the pH buffer set, number of calibration points, temperature unit, etc. *Reset function automatically resumes all setting back to the factory defaults. Accessories: *PH electrode. *Temperature probe (Only for PHS-3BW and PH-210 meter). *PH buffer pouches (pH4.01/7.00/10.01). *DC9V power adapter.   

Benchtop pH Meter

Measurement Parameters: PH-320: pH, mV, relative mV, ion concentration, temperature PH-321: lon concentration, mV, temperature  Features: pH *1 to 5 points calibration with automatic recognition for USA, NIST and DIN buffers. *Automatic electrode diagnosis shows the pH slope and offset. ORP *1 point offset calibration allows adjusting the displayed value to a known standard. *Relative and absolute millivolt modes ensure the reliable ORP measurements. Ion Concentration *2 to 5 points calibration, including the 8 concentration points can be selected. *Direct concentration readout simplifies the measurement process. *Automatic electrode diagnosis shows the calibration points and slopes. *Selectable concentration units (ppm, mg/L, mol/L, mmol/L) and ionic valency. General Features: *Automatic temperature compensation ensures accurate readings over the entire range *Auto-Read function senses and locks the measurement endpoint. *Calibration due alarm prompts user to calibrate the meter regularly. *Auto-Power Off effectively conserves battery life. *Setup menu allows setting the number of calibration points, resolution, stability criteria, temperature unit, date and time, etc. *Reset function automatically resumes all settings back to the factory defaults. *Expanded memory stores or recalls up to 500 data sets. *USB communication interface is easy to transfer data to PC. *Multi-mode power scheme (batteries, power adapter and USB port) Ensures that using the meter smoothly. Optional Ion Selective Electrodes: Ammonium (NH4+), bromide (br-), cadmium (Cd2+), calcium (Ca2+), chloride (Cl-), cupric (Cu2+), cyanide (Cn-), fluoride (F-), lodide (I-), lead (Pb2+), nitrate (NO3-), potassium (K+), silver (Ag+), sodium (Na+), sulphide(S2-) and ammonia (NH3) Accessories: *PH electrode *Temperature probe *PH buffer solutions (pH4.01/7.00/10.01) *Carrying case   

Portable pH/ORP Meter

Features: pH *1 to 5 points calibration with automatic recognition for USA, NIST and DIN buffers. *Automatic electrode diagnosis shows the pH slope and offset. *Automatic temperature compensation ensures accurate readings over the entire range. *Calibration due alarm prompts user to calibrate the meter regularly. ORP *1 point offset calibration allows adjusting the displayed value to a known standard *Relative and absolute millvolt modes ensure the rellable ORP measurements General Features *Auto-Read function senses and locks the measurement andpoint *Auto-Power Off effectively conserves battery life *Setup menu allows setting the pH buffer set, number of calibration points, resolution, stability criteria, temperature unit, date and time, etc. *Reset function automatically resumes all settings back to the factory defaults *Expanded memory stores or recalls up to 500 data sets *USB communication interface is easy to transfer data to PC *Multi-mode power scheme (batteries, power adapter and USB port) ensures that using the meter smoothly Accessories: *PH electrode *Temperature probe *PH buffer solutions (pH4.01/7.00/10.01) *Carrying case   

GOnDO Electronic Co., Ltd.

Microprocessor based designed. Large LCD displays readings and temperature simultaneously. Rugged design with waterproof housing. It floats on water. Measuring 5 parameters: pH, Conductivity, TDS, Salinity, and temperature by just on combo electrode. Automatic Temperature Compensation (ATC). &deg;C or &deg;F are switchable. Memory function stores and recalls up to 150 points. MAX/MIN and data Lock (8200M only). Simple to calibrate by one keyboard for 5 points buffer. Indicate percentage of slope (PTS) after calibration Auto power shut off after 10 minutes of non use. Easy replaced electrode module.

pH/ORP/Conductivity/TDS/Salt/Temp. Meter

This is a series of pen-type meters for pH, conductivity, TDS, ORP, and EC testing. They promise fast response and offer reliable and accurate measurements. Each piece has an impact-resistant ABS case with a waterproof rate of IP57 and a large LCD display for convenient reading.
 
  LCD display: 21 x 18mm. 
  1 or 2 points (pH only) manual calibration via a screw trim pot. 
  Changeable electrode module for replacement by users. 
 

Waterproof Pen-Type Meter

 This bench top meter features a microprocessor based designed with a rugged housing and a splash-proof keyboard. The large backlight LCD can display pH, ORP, conductivity or DO and temperature simultaneously. The memory function stores and recalls up to 150 points. 
 
  PL-700AL(S): pH, mV, conductivity, TDS, salt, DO, temperature, (stirrer). 
  PL-700PC(S): pH, mV, conductivity, TDS, salt, temperature, (stirrer). 
  PL-700PD(S): pH, mV, DO, temperature, (stirrer). 
  PL-700PV(S): pH, mV, temperature, (stirrer). 
  Automatic temperature compensation (ATC). 
  Manual salinity (MSC) and altitude (MAC) compensation. 
  Max/min and data lock. 
  Degree ℃/℉ are switchable. 
  Combine special platform and electrode holder, or stirrer (optional) for measuring convenient. 
  The TDS value is determined by multiplying a conductivity reading by a known ratio in the range of 0.50 to 1.00. 
  Output data for capturing on PC directly via USB. 
 

Bench Top Meter

Fast response, reliable and accurate measurements. Large LCD display 21 x 18 mm for reading convenient. Impact resistant ABS case by waterproof designed IP 57 rated. 1 or 2 points(pH only) manual calibration via screw trim pot. The electrode module are changeable for replacement by user.

6000 Series Waterproof Pen Type Meter 

LifeCore Instrument Inc.

Most of the water ionizer for home use is based on 3,5,7 plates platinum coated titanium electrode, 1 or 2 filters (4,000 liter purification). Double Cross Auto Cleaning System. All the elctrode is made of platinum plated titanium. 1)Front loading filter exchange(Front door) 2)Best ORP(-700mV), pH 3)170W SMPS: Stable in any circumstance, No over heat, No energy consumption in stand-by state.

Water Ionizer

This is a waterproof pen meter with a professional design for reliable performance. It is fitted with a large LCD screen for easy viewing. This pen meter is easy and safe to operate.
 
  Fast response, reliable and accurate measurements. 
  Large LCD display 21 x 18 mm for reading easily. 
  Impact resistant ABS casing. 
  Waterproof: IP57 rated. 
  1 or 2 points (pH only) manual calibration via screw trim pot. 
  The electrode module is changeable for replacement by users. 
 

Waterproof Pen Meter

This is a multifunctional pen meter that boasts a robust waterproof housing for enhanced durability. It is well designed to deliver reliable and high-precision performance. The ergonomic handle allows a firm and easy grip.
 
  Microprocessor based for fast and accurate measurements. 
  Waterproof housing: IP57. 
  It floats on water. 
  Large LCD display pH or ORP or conductivity or TDS or salinity or DO and temperature simultaneously. 
  Simple to calibrate by one keyboard and automatic temperature compensation (ATC), manual salinity (MSC) and altitude (MAC) compensation. 
  Multi-functions with data-hold, max./min. and show PTS after calibration. 
  Degree ℃/℉ are switchable. 
  Low battery and consumption indicator. 
  Auto power shut off after 10 minutes of non use. 
  Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion. 
 

Waterproof Multifunctional Pen Meter

Microprocessor based designed, and rugged housing with splash proof keyboard. The large backlight LCD displays pH or ORP or Conductivity or DO and Temperature simultaneously. Automatic Temperature Compensation(ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation. Memory function stores and recalls up to 150 points. MAX/MIN and data Lock. Degree ℃/℉ are switchable. Combine special platform and electrode holder, or stirrer(Optional) for measuring convenient. The TDS value is determined by multiplying a conductivity reading by a known ratio in the range of 0.50 to 1.00. Output data for capturing on PC directly via USB or Bluetooth

PL-700 Series Bench Top Meter with Stirrer

深圳市巨大鼎新科技有限公司

   3.8 inch LCD screen.   Display the PH value, ORP, time, water flow, temperature and operating instructions.   Automatically remind filter replacement when the filters are out of service life.   With high performance and environmental protection power button.   Biological touch button.   Automatic/manual electrolytic cell cleaning function.   Electrolysis with hot water.   Electrolytic strength regulation setting: 15 levels.   micro-adjust for alkaline water and 6 levels for acid water.   Acid water has 2-stage selections, alkaline has 3-stage selections, pure water has 1-stage selection.   Electrode materials: Titanium-platinum alloy.   Water yield: alkaline water 4liter/min; acid water 3 liter/min.   Outlet water temperature: about 36 Centidegree.   Machine protection mode: over voltage protection, under voltage protection, over current protection, overheat protection.   Placement: flat or hanging on the wall.   Electrolysis generation mode: continuous electrolysis.  Package: 
   Unit Size: 210 x 100 x 325mm.   Packing size: 310 x 150 x 450mm.   Unit G.W: 3.5kg.  

High Quality Commercial Water Ionizer/3.8 inch LCD Screen Faucet Water Ionizer

   Product name: alkaline water ionizer.   3.8 inch LCD screen.   Display the PH value, ORP, time, water flow, temperature and operating instructions.   Automatically remind filter replacement when the filters are out of service life.   With high performance and environmental protection power button.   Biological touch button.   Automatic/manual electrolytic cell cleaning function.   Electrolysis with hot water.   Electrolytic strength regulation setting: 15 levels.   micro-adjust for alkaline water and 6 levels for acid water.   Acid water has 2-stage selections, alkaline has 3-stage selections, pure water has 1-stage selection.   Electrode materials: Titanium-platinum alloy.   Water yield: alkaline water 4liter/min; acid water 3 liter/min.   Outlet water temperature: about 36 centidegree.   Machine protection mode: overvoltage protection, undervoltage protection, overcurrent protection, overheat protection.   Placement: flat or hanging on the wall.   Electrolysis generation mode: continuous electrolysis.  Package: 
   Unit size: 210 x 100 x 325mm.   Packing size: 310 x 150 x 450mm.   Unit G.W.: 3.5kg.  

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?