wenzhou weituo precision mould co.,ltd

The photocontroller can turn on and off light automatically according to ambient light; Our product is widely used on streetlighting, garden lighting, area lighting, other outdoor lighting etc.This product is designed with electronic circuits with sensor of photodiode and a surge arrester (MOV) is provided. Its quicker response with time delay of 3-10 seconds offers easy to test feature. This model photocontrol can provide a wide voltage range for customer appliations under almost power supplies.  

Dusk to Dawn Photocell Sensor Twist Lock Twilight Switch

Yueqing Ruiyang Electronic Co., Ltd

Specification               Description Nominal Voltage           20/208/240/277Vac,50/60Hz Applicable Voltage            220 Vac,50/60Hz Rated Load            6A@120/208/240Vac Ballast Power Consumption         0.8Watt Operating Temperature       -30℃ to +70℃ Life Span              5,000 Operations minimum Fail Mode              Fail on or Fail Off Sensor type             Silicon Photodiode or CDS Cell Sensor type            UV Stabilized Polycarbonate Casing Switch on Level          10-22Lux Switch off Level         65LUX (or on request) On/Off Ratio            1:1.2 On/Off Delay            About 30s (or on request ) 

Mini Photocell Sensor Switch Photocontrol  

Photocell Sensor Switch

Specification               Description Nominal Voltage           20/208/240/277Vac,50/60Hz Applicable Voltage            105~305Vac,50/60Hz Rated Load            6A@120/208/240Vac,3.6A@277Vac,Ballast                  8A@120Vac,3A@208/240/277Vac,Electronic Ballast Power Consumption         0.8Watt Operating Temperature       -30℃ to +70℃ Life Span              5,000 Operations minimum Fail Mode              Fail on or Fail Off Sensor type             Silicon Photodiode or CDS Cell Sensor type            UV Stabilized Polycarbonate Casing Switch on Level          10-22Lux Switch off Level         65LUX (or on request) On/Off Ratio            1:4 On/Off Delay            About 30s (or on request ) 

IP67 Protection outdoor photocell sensor switch photocontrol  

Specification               Description Nominal Voltage           20/208/240/277Vac,50/60Hz Applicable Voltage            105~305Vac,50/60Hz Rated Load            8A@120/208/240Vac,3.6A@277Vac,Ballast                  8A@120Vac,3A@208/240/277Vac,Electronic Ballast Power Consumption         0.8Watt MOV                 660J ( Operating Temperature       -30℃ to +70℃ Life Span              5,000 Operations minimum Fail Mode              Fail on or Fail Off Sensor type             Silicon Photodiode or CDS Cell Sensor type            UV Stabilized Polycarbonate Casing NEMA IP Level           IP54 or IP65 Switch on Level          10-22Lux Switch off Level         65LUX (or on request) On/Off Ratio            1:4 On/Off Delay            About 30s (or on request ) 

IP65 Protection Twist-lock Sensor Switch Photocontrols

Twist-lock Sensor Switch Photocontrols photocell sensor switch 

漳州市东方智慧型仪器表有限公司

Widely used in electro-optical source, research teaching, industry inspection as well as agriculture researching and illumination control
Large LCD display 	 Backlight LCD display 	 Data-hold function  Specifications 	 Range:1~50000 Lux in 3 ranges 	 Sampling Rate: About 2 times/sec 	 Sensor: Silicon photodiode &amp; filter 	 Weight: 198g 	 Power Source: 9V (6F22) battery x 1pc  

Digital LUX Meter

Ningbo Pdlux Electronics Technology Co Ltd

                                                PD-D20A-Z                         PD-D20B-Z  Power Source100-127VAC 220-240VAC100-277VAC 220-240VACPower Frequency50/60Hz50/60HzRated Load800W (100V-127VAC 50/60Hz)800W (100V-127VAC 50/60Hz)1500W (220-240VAC 50/60Hz)1500W (220-240VAC 50/60Hz)1800W (277VAC 50/60Hz)Light-control&lt; 5LUX - 20LUX (adjustable)&lt; 5LUX - 20LUX (adjustable)Power consumption&lt; 0.5W

Photoelectric sensor

Power Source100-130VAC 220-240VACPower Frequency50/60HzLight-control8~30LUX＜5~100LUX (only for PD-P02 &amp; PD-P03)Rated Current6A10A

Light control sensor

Power Source220-240VACPower Frequency50HzLight-controlLoad on＜10LUXLoad off＞30LUXRated Current6A (pure resistance load)

ParametersSymbolMinTypMaxUnitNoteSupply VoltageVDD2.233.7VWorking currentIDD99.511μASensitivity thresholdVSENS902000μVOutput RELLow output currentIOL10mAVOL&lt;1VOutput high currentIOH-10mAVOH&gt;(VDD-1V)REL low level output lock timeTOL2sNot adjustableREL high level output lock timeTOH23600sEnter SENS/ONTIMEVoltage input range0VDD/2VThe adjustment range is between 0V and VDD/2Input bias current-11μAEnable OENInput low voltageVILBetween 0.8V-1.2Vis the hysteresis area0.8VOEN voltage high to low threshold levelInput high voltageVIH1.2VOEN voltage low to high threshold levelEnter the currentII-11μAVss ＜ VIN ＜ VDDOscillators and filtersLow-pass filter cutoff frequency7HzHigh-pass filter cut-off frequency0.44HzThe oscillator frequency on the chipFCLK64kHz 

Infrared Motion Sensor SMD

ParameterSymbolMinMaxUnitNoteOperating temperatureT OT-3070℃VoltageV DD315VView angleθX=110°Y=100°°Field of view is theoretical valueStorage temperatureT ST-4080℃Detection wavelengthλ514μmInfrared receiving electrodes2*24elements

Power Source100-130VAC 220-240VACPower Frequency50/60HzLight-control8~30LUX＜5~100LUX (only for PD-P02 &amp; PD-P03)Rated Current6A10A15A (only for PD-P03)25A (only for PD-P03)

NoTest itemsStandard testTest Results1Salt mist testGB/T 10125-2012OK2High temperature test500 hours at 70℃OK3High temperature test500 hours at -40℃OK4Hot and cold shock test30℃±3℃@30min→25℃±3℃@min→70℃±3℃@30min→25℃±3℃ cycle 10 timesOK5Hot flash testTemperature 85℃, 85%RH, 100 hoursOK6Resistance to welding heatSolder 2 times in accordance with the prescribed reflow soldering process.During the secondsoldering, the product must be cooled to room temperatureOK7Vibration testFrequency variation: 10-55Hz, amplitude 1.5mm, 3 axis vertical direction each vibration for 1h OKOK8Air tightnessSoak the product in water, vacuum: 1kPa, 5 minutes OKOK

 Infrared Motion Sensor SMD

ParameterSymbolMinTypMaxUnitNoteSupply VoltageV DD2.233.7VWorking currentI DD99.511μASensitivity thresholdV SENS902000μVOutput RELLow output currentI OL10mAVOL&lt;1VOutput high currentI OH-10mAVOH&gt;(VDD-1V)REL low level output lock timeT OL2sNot adjustableREL high level output lock timeT OH23600sEnter SENS/ONTIMEVoltage input range0VDD/2VThe adjustment range is between 0V and VDD/2Input bias current-11μAEnable OENInput low voltageV ILBetween 0.8V-1.2Vis the hysteresis area0.8VOEN voltage high to low threshold levelInput high voltageV IH1.2VOEN voltage low to high threshold levelEnter the currentI I-11μAV ss ＜ V IN ＜ V DDOscillators and filtersLow-pass filter cutoff frequency7HzHigh-pass filter cut-off frequency0.44HzThe oscillator frequency on the chipF CLK64kHz

Power Source100-277VACPower Frequency50/60HzRated Load800W Max.(100-127VAC)1500W Max.(220-240VAC)1800W (277VAC)Light-control＜5Lux-20Lux(adjustable)Power consumption＜0.5W

Power Source100-130VAC 220-240VACPower Frequency50/60HzLight-control＜20LUXRated Current1A

PREMA Semiconductor GmbH

This is a photodiode with a dual-cell design. Made professionally, this photodiode is sensitive and efficient. This dual photodiode comes in a compact size and is easy to install. 	 Very small plastic leadless optical package. 	 High sensitivity. 	 Low dark current.  

Dual Photodiode

Genicom Co Ltd

Listing Description Gallium Nitride Based Material
Schottky type Photodiode
Photovoltaic Mode Operation
Good Visible Blindness
High Responsivit
Detailed Description * Feature
- AlGaInN-based Schottky photodiode
- Photovoltaic mode
- Window material : Quartz
- Good visible blindness
- Low dark current
- High reliability
- Hermetic package

* Specification
- Operating temp: -30 ~ 85 C
- Dark current: &lt; 1 nA max.
- Peak responsivity: 0.1 A/W typ.
- Detection range
&gt; GUVV-T10GD : 230 ~ 395 nm
&gt; GUVA-T11GD, GUVA-T11GD-L, GUVA-T21GD-U : 220 ~ 370 nm
&gt; GUVB-T11GD, GUVB-T11GD-L, GUVB-T21GD-U : 220 ~ 320 nm
&gt; GUVC-T10GD, GUVC-T10GD-L, GUVC-T20GD-U : 210 ~ 280 nm
- Chip size
&gt; Standard (GUVx-T1xGD) : 0.4 mm X 0.4 mm (TO-46)
&gt; Large (GUVx-T1xGD-L) : 1.4 mm X 1.4 mm(TO-46)
&gt; Ultra large (GUVx-T2xGD-U) : 3.4 mm X 3.4 mm(T0-39)

* Application
- UV curing
- UV sterilization
- UV spectroscopy
- UV Index monitoring
- UV lamp/LED monitoring

UV sensor TO type

Listing Description GUVV-S10SD : 240 ~ 395 nm
GUVA-S12SD : 240 ~ 370 nm
GUVB-S11SD : 235 ~ 320 nm
Detailed Description * Feature
- AlGaInN-based Schottky photodiode
- Photovoltaic mode
- Window material : Si
- Good visible blindness
- Low dark current
- High reliability

* Specification
- Operating temp: -30 ~ 85 C (-22 ~ 185 F)
- Dark current : &lt; 1 nA max.
- Peak responsivity: 0.1 A/W typ.
- Detection range
&gt; GUVV-S10SD : 240 ~ 395 nm
&gt; GUVA-S12SD : 240 ~ 370 nm
&gt; GUVB-S11SD : 235 ~ 320 nm

* Application
- UV Index monitoring
- UV lamp/LED monitoring
- UV spectroscopy

UV SENSOR SMD type

PIMACS Co., Ltd

  This mirror-type goniophotometer system comes with a black and silvery finish. It is used for measurement of the light emitted from an object at different angles. It is a perfect measuring device for LED light sources.      Measurement according to LM-79 and CIE-121 specifications.      Essential instruments for Energy Star certification of various luminaire.      Automatically batch measuring optical properties such as distribution of luminous intensity, total luminous flux, color coordinate, color rendering index, correlated color temperature, etc. and electrical properties such as voltage, current, electric power, electric efficiency, etc.     Model: NeoLight 9300/9500/9700.      Goniophotometer - C, &gamma;, S axis scanning mode.     Scanning resolution: 0.03 deg.      Accuracy: 0.05 deg.      Sample max. size/weight: 1600mm/ 50kg.      Balanced optical mirror.     Motor balanced mirror moving system.     Size: max. 2100mm X 1700mm.     Detector module.      High dynamic silicone photodiode detector.     F1' factor accuracy: 1.5% (spectral responsivity calibration with spectroradiometer).     The measurement Item.     Luminous intensity per degree (cd) and total luminous flux (lm) of LED lamps and various luminaire     Color coordinate(x, y), Color rendering index (CRI) and correlated color temperature (CCT).     Voltage (V), current (A), electric power (W) and luminous efficiency (lm/W).   

我的采购

确定要取消关注此供应商?

确定要取消关注此供应商?