L D Diamond and Jewellery Ltd

Bearing Ring

Q-Nitto Hong Kong Limited

Model No. : MT82-B21A Material : SUS304 Spec : ID 7±0.05 x OD 11±0.2 x L 7.2 ±0.1 x t= 2.0 Joint Gap : 0.05 below  Dimple Shape : (0.8x1.6) 凹 (0.3) Purpose : Use for automotive Description : 1. Indents are shaped square by standard (see fig.) and 1/4t to 1/2t in depth. 2. Nominal diameter also represents bolt diameter. 3. Internal diameters are measured by pin gauge. 4. Numbers in the table represent numbers of rows. 5. Production of Insert Bushing is available on request (made-to-order). 6. Diamond, straight, or other knurling patterns also available for indents. Can custom-made by providing drawings. Up to many different sizes from 4 inch to 12 mm.  Can OEM? : No, can't add logos. MOQ : 150,000pcs   

Insert Bushing 

Insert Bushing for automotive applications, Model No MT82 B21A

Model No. : HGW15CCZOC Description : HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove and structure optimization. It features equal load ratings in the radial, reverse radial and lateral directions, and self-aligning to absorb installation error. Thus, HIWIN HG series linear guideways can achieve a long life with high speed, high accuracy and smooth linear motion.  Features of HG series: (1) Self-aligning capability By design, the circular-arc groove has contact points at 45 degrees. HG series can absorb most installation errors due to surface irregularities and provide smooth linear motion through the elastic deformation of rolling elements and the shift of contact points. Self-aligning capability, high accuracy and smooth operation can be obtained with an easy installation.  (2) Interchangeability Because of precision dimensional control, the dimensional tolerance of HG series can be kept in a reasonable range, which means that any blocks and any rails in a specific series can be used together while maintaining dimensional tolerance. A retainer is added to prevent the balls from falling out when the blocks are removed from the rail.  (3) High rigidity in all four directions Because of the four-row design, the HG series linear guideway has equal load ratings in the radial, reverse radial and lateral directions. Furthermore, the circular-arc groove provides a wide-contact width between the balls and the groove raceway allowing large permissible loads and high rigidity.  MOQ : 1pcs   

Linear Guide

Linear Guide with high load capacity and smooth motion

山東中軸軸承有限公司

 Pillow Block&nbsp;bearings 
avilable in diff size
Dynamic load ratings N: 3500-96000 (depends on size)
Static&nbsp;load ratings N: 6650-71500&nbsp;(depends on size)
a pedestal used to provide support for a rotating shaft with the help of compatible&nbsp;bearings&nbsp;&amp; various accessories
made of&nbsp;cast iron&nbsp;or&nbsp;cast steel
Origin: Shandong, CHina
Welcome to contacat us for detail
&nbsp;

Pillow Block Bearings Set

 	 Taper roller bearings set 	 avilable in diff size 	 Weight: 0.081kg-42kg (depends on size) 	 application: Pairs of tapered roller bearings are used in car and vehicle wheel bearings&nbsp; 	 Origin: Shandong, CHina 	 Welcome to contacat us for detail  

Taper Roller Bearings Set

Taper Roller Bearings Set for car and vehicle wheels

山東萬瑞達軸承有限公司

 	 Taper Roller Bearing&nbsp;30205Equipment Type: Roller 	 Inside diameter: 25mm 	 outside diameter: 52mm 	 width: 16,25mm 	 Applications:&nbsp;Trailer and Caravan axles  

Taper Roller Bearing 30205

Taper Roller Bearing 30205 for trailer and caravan axles

Fuk Hing Manufacturing Co. Limited

Tensioner

 	 Deep groove ball bearings 	 avilable in diff size 	 These bearings arecommon type and are used in a wide variety of applications, including mechines and vehicles 	 Origin: Shandong, CHina 	 Welcome to contacat us for detail  

Deep Groove Ball Bearings Set

 	 DEEP GROOVE BALL BEARING 	 Inside Diameter: 25mm 	 Outside Diameter: 52mm 	 Ball Bearing Type: Deep Groove 	 Race Width: 15mm 	 End Type: Sealed 	 Number of Rows: 1 	 Static Load Rating: 7.8kN 	 Cage Material: Steel 	 Race Type: Plain 	 Dynamic Load Rating: 14.8kN 	 Limiting Speed: 8500rpm 	 Bore Type: Parallel  

Deep Groove Ball Bearing

Deep Groove Ball Bearing with various specifications

KOGA GEAR PRODUCT CO LTD

   Designed for professional usages reliably.   High-precision positioning.   Minimize noise /vibration of machine devices.&nbsp;   Cumulative pitch error of less than 15&mu;m.   18 time more in tooth surface , 2.6 times more in bending strength of our carburized version compared with conventional normal straight rack:   Added intensity.   Minimizes noise and vibration of machine devices&nbsp;with&nbsp;60% reduction in vibration.  

我的採購

確定要取消關注此供應商？

確定要取消關注此供應商？