AnQing HengHe Electronics LLC.
The color of color LED lamp changes continuously, and the photosensitive plate is automatically controlled. When there is no strong light induction, the LED is automatically turned on without wiring. The installation is simple and the work is stable and reliable
1: The internal chip circuit is connected at the factory. It contains a 1.2V 600 Ma battery and a solar chip 2V 100 mA
2: After installation, please turn on and hang the switch. The color LED lamp and photosensitive plate are automatically operated. When there is no strong light induction, the LED is automatically turned on
3: The geographical location of installing solar lamps must be in the section with sufficient daylighting and not blocked by any obstacles.
4: Single product unified mail order box packaging 13 * 13 * 8cm/1pc outer box: 55 * 27.5 * 43cm / 40PCS
matters needing attention
1: Since the conversion efficiency of solar panels is affected by the light intensity, the continuous luminous time of the lamp string will vary according to weather conditions, seasonal changes, geographical location and other factors. This is normal.
2: The lamp string can be charged only when the "on / off" is adjusted to the "on" state.
3: The waterproof design of the product is limited to rain and moisture. Do not immerse the product in water for a long time.
4: Please do not hit or beat this product violently to avoid damage!
5: Please read the installation and use instructions carefully!