Item: Jump starter air compressor

Multi-functional

A 、USB mobile power output, automatic allocation of 5V1A and 5V2. 1A;

B 、6W COB white light illumination output;

C 、6W COB red light illumination output;

D 、6W high brightness red flashing warning lamp output;

E 、6W SOS signal output;

F 、DC12V 20A high current output;

Auto emergency start function

#1000A super high power emergency start function; can Be started up to 15 times;

#-30 to +60 degree normal start-up environment;

Air Pump Motor Detail:

#Voltage-12V current-10A, Speed-17000 rpm

#High precision tire pressure detection and inflation function;

#The preset inflation pressure has memory function;

#5-minute rapid inflation function;

#One button start, & automatic full stop function;

#4 kinds of air pressure units are freely switched;

#Material: ABS

Specification:

Charging time: 4-5 hours

Rated Input: 2A

Battery capacity: 8000 maH

Starting current: 500 A

Peak current: 1000 A

Cylinder 19 mm

Power: 60W

Inflation time: 6-8 minutes (195 tire)

Operation temperature: -20℃ to 60℃

Product size: 180x85x550 mm

Weight: 475 gm

The product is a car battery emergency start, lighting, & SOS.

Please charge to 12V on-board devices to power. 

 Charge the device

Note: Charge at least 4 hours before first use.

Indication of power status

*Press the power switch for 3 seconds to check the power status of the device.

*When use for car start-up, it is recommended that the device should be at or near 100% power, or at least 70% power.

Charging instructions

*Connect the AC adapter to the equipped USB charging cable to charge the device.

*Do not use any other charging cable and charger otherwise may damage the internal lithium-ion battery.

*The power indicator LED lights will be lit in turn to indicate the charging progress.

*When all the LED lights are on, the device is fully charged.

Product accessories

Lithium Power Pack with air pump

Clamp cable

Type C cable

User manual

car jump starter

Battery booster tire inflator

Charge your mobile device

1)  Plug the USB charging cable into the device's USB charging Port

2)  Connect the charging cable to the mobile device

3)  Press the power switch to start charging

Lighting

The device has a number of different working light modes by pressing the power switch.

In any of the modes, press and hold the power switch for four seconds to close the device.