雅迪勤(亞太)有限公司
請輸入包含最少兩個字母或數字的關鍵字。
描述
聯絡供應商
描述
Specification of ADEKOM ETC Series Oil-free Screw Air Compressor
1. Air capacity:5.20,4.80,4.05,6.42,5.69,4.69 m3/min
2. Max.working pressure: 8,10,13 bar(g)
3. Motor power: 30- 37kW
4. Cooling method: Air-cooled
5. Transmission method: Belt Driven
Features of Oil-free Non-Lubricated Screw Air Compressor
1.ADEKOM’s R&D team combined a sprinkler system compressor and an oil-free compressor from our German partners to generate a completely new environmental friendly series: ETC oil-free screw air compressor.
2.Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air.
3.The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment.
4.Oil/hydrogen concentration is below 0,0025 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential.
5.High Efficiency Insulated Heat Exchanger
High efficiency insulated heat exchanger is used to bring up the operating temperature to the optimal reaction temperature for catalytic conversion and then also to cool down the clean and oil free air. In this case, heater inside conversion chamber only needs to be energized in the starting phase of the compressor.
6. Catalytic Conversion Chamber
Inside the catalytic conversion chamber, it is full of catalyst which is solid, highly porous system of mega-, macro- and micropores. The high porosity means also a high surface area of approx. 200m²/g.
Chemical Reactions inside the Eco Tec Converter is a physical-chemical process which uses this special catalyst to convert the oil and other hydrocarbons into water and CO2.
After it has passed the Eco Tec Converter, the quality of the absolutely oil free compressed air exceeds by far the requirements of ISO 8573-1 class 1 standard.
1. Air capacity:5.20,4.80,4.05,6.42,5.69,4.69 m3/min
2. Max.working pressure: 8,10,13 bar(g)
3. Motor power: 30- 37kW
4. Cooling method: Air-cooled
5. Transmission method: Belt Driven
Features of Oil-free Non-Lubricated Screw Air Compressor
1.ADEKOM’s R&D team combined a sprinkler system compressor and an oil-free compressor from our German partners to generate a completely new environmental friendly series: ETC oil-free screw air compressor.
2.Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air.
3.The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment.
4.Oil/hydrogen concentration is below 0,0025 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential.
5.High Efficiency Insulated Heat Exchanger
High efficiency insulated heat exchanger is used to bring up the operating temperature to the optimal reaction temperature for catalytic conversion and then also to cool down the clean and oil free air. In this case, heater inside conversion chamber only needs to be energized in the starting phase of the compressor.
6. Catalytic Conversion Chamber
Inside the catalytic conversion chamber, it is full of catalyst which is solid, highly porous system of mega-, macro- and micropores. The high porosity means also a high surface area of approx. 200m²/g.
Chemical Reactions inside the Eco Tec Converter is a physical-chemical process which uses this special catalyst to convert the oil and other hydrocarbons into water and CO2.
After it has passed the Eco Tec Converter, the quality of the absolutely oil free compressed air exceeds by far the requirements of ISO 8573-1 class 1 standard.
您或許喜歡
確定要取消關注此供應商？