Electronics

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Parts, Components & Raw Materials

Find Parts, Components & Raw Materials from the best B2B online marketplace. Find a reliable Parts, Components & Raw Materials supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Parts, Components & Raw Materials Suppliers and Manufacturers

Active Components

elec

Find Active Components from the best B2B online marketplace. Find a reliable Active Components supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Active Components Suppliers and Manufacturers

S. T. Industrial (Asia) Limited

MS-22E01

MS 22E01 Mini Slide Switch, SMT type 2P2T

operating Force : 100gf  160gf 
250gf
Metal Knob , Plastic Knob

TD-13MA

TD 13MA tact switch with customizable features

KWAN DA ELECTRONIC (HK) LIMITED

 ITEM PERFORMANCE Title TACT SWITCH Model TD-402GB Rating 50mA 12V DC ContactResistance(mohms) 100mΩ max Insulation Resistanc(Mohms) 100MΩ min Dielectric Strength(V) AC 500V FOR 1 MIN LifeTest 1,000,000 Cycles OPERATING FORCE 300gf±150gf   

tact switch Dust-proof type(TD-402GB 300gf)

tact switch Dust proof type TD 402GB 300gf

Ningbo Pdlux Electronics Technology Co Ltd

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240VACPower Frequency50/60HzOutputDC36V 300mA±5%Rated Load10W Max.Power factor＞0.7HF system5.8GHz CW electric wave, ISM wave bandTransmission power＜0.2mWDetection range2m-6m-14m(diameter) (adjustable)Time Setting15sec±3sec/ 1min±10sec/ 3min±30sec/ 10min±1min (adjustable)Light-control10LUX-50LUX-200LUX-2000LUX (adjustable)Detection angle360°Working temperature-15°C~+70°CStandby powerapprox.0.5WInstallation sitindoors, ceiling mounting 

PDLUX PD-MVGS Microwave Sensor Switch 

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240VACPower Frequency50/60HzTransmission Power&lt;0.2mWRated Load1600W Max. (220-240VAC)1000W Max. (100-130VAC)HF System5.8GHz CW Electric Wave, ISM BandDetection Angle360° (ceiling installation)180° (wall installation)Detection Range (22℃）2 - 8m (radii.) (adjustable)Vertical Movement Detection Distance&gt;16mTime Setting10sec - 12min (adjustable)Light-control10 - 1000LUX (adjustable)Working Temperature-15℃ ~ +70℃Protection LevelIP20, Class II

PDLUX PD-MV1019-Z Microwave Sensor Switch 

PDLUX PD MV1019 Z Microwave Sensor Switch

Kin Yuan Enterprise Co Ltd

FeaturesModular dimming mechanismSoft start function to protect the lampOver-temperature, over current protectionProvide optimised dimming of LED based lamps and driversImmune to high frequency (ripple) signal injection on mains supplyWith Min. and Max. brightness adjustment, to achieve the optimum dimming range for a particular loadRated Voltage   AC 220-240 V / 50Hz Connected Load  5VA - 400VA (1 - 15 LEDs, 150W max.) Minimum Load  5VA Dimming Method   Trailing edge phase control ﻿Push button and ON/OFF switch Type of Loads  Dimmable LED Light 220 - 240V AC Incandescent lamps Connection   Screw terminals 

HY-L400DIM-EU

HY L400DIM EU modular dimmer for LED and incandescent lamps

 ITEM PERFORMANCE Title TACT SWITCH Model TC-0851 Rating 50mA 12V DC ContactResistance(mohms) 100mΩ max Insulation Resistanc(Mohms) 100MΩ min at 500V DC Dielectric Strength(V) AC 250V FOR 1 MIN LifeTest 1,000,000 Cycles OPERATING FORCE 300gf±150gf   

Dust proof tact switch(TD-0851)

NINGBO HELISHUN ELECTRON CO.,LTD

HLS-4078

Sun Lik Printing & Screen Metal Co

Custom Graphic Overlays &amp; Membrane Switch Panels We specialize in manufacturing high-quality graphic overlays and membrane switch control panels using premium PC, PET, and PVC materials. Engineered with advanced multi-color silk screen printing, our panels features integrated button embossing, crystal-clear display windows, and selective adhesive backings. They are highly resistant to scratching, chemicals, and wear, ensuring long-lasting performance for medical, industrial, and home appliance interfaces. Fully compliant with ISO 9001 and RoHS standards.  INTEGRATED WINDOWS MULTI-COLOR PRECISION PRINTING EMBOSSED KEYS POTENTIAL 

CUSTOM MEMBRANCE SWITCHES , OVERLAYS & INDUSTRIAL LABELS

CUSTOM MEMBRANCE SWITCHES, OVERLAYS INDUSTRIAL LABELS

FeaturesModular dimming mechanismSoft start function to protect the lampOver-temperature, over current protectionProvide optimised dimming of LED based lamps and driversImmune to high frequency (ripple) signal injection on mains supplyWith Min. and Max. brightness adjustment, to achieve the optimum dimming range for a particular loadRated Voltage  AC 220-240 V / 50Hz Connected Load  5VA - 400VA (1 - 15 LEDs, 150W max.) Minimum Load  5VA Dimming Method    Trailing edge phase control ﻿Knob/ push button and ON/OFF switch Type of Loads  Dimmable LED light 220 - 240V AC Incandescent lamps﻿ Connection  Screw terminals 

Digital dimmer 

Digital dimmer with modular dimming mechanism and soft start function

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240V/ACPower frequency50/60HzTransmission power&lt;0.3mWInstallation sitindoors, ceiling mountingHF system5.8GHz CW electric wave,ISM bandDetection Range1m-3m-6m-11m (radii.) (adjustable)(Ceiling installation)25m Max. (adjustable)(Wall installation)Detection Angle360°(Ceiling installation),180°(Wall installation)Working Temperature-15°C~+70°CInstallation sitindoors, ceiling mountingTime setting8sec-1min-5min-12min, (adjustable)Light-control10LUX-50LUX-200LUX-1000LUX, (adjustable)Power consumptionapprox.0.5W 

PDLUX PD-MV1016B Microwave Sensor Switch 

HK HANGDIN TECH LIMITED

This 1270/1330nm DFB 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber The SFP+ module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector. The transmitter converts 10Gbit/s serial CML electrical data into serial optical data compliant with the 10GBASE-ER standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ. TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 kΩ, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable. 

SFP+ 10G BIDI  Transceiver

SFP 10G BIDI Transceiver for high-speed optical data transmission

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240VACPower Frequency50HzRated Load1000W Max.(220-240VAC) 400W Max.(100-130VAC)HF system5.8GHz CW electric wave, ISM wave bandTransmission Power＜0.2mWPower ConsumptionApprox.0.5WDetection Range3-9m (radii.) (adjustable)(ceiling mounting) 25m Max. (adjustable),(wall mounting)(vertical movement)Time Setting8sec-10min (adjustable)Light-control10-300LUX~ daytime (adjustable)Detection Angle360°(Ceiling installation)Installation SitCeiling mounting, Wall installationIP20 

PDLUX PD-MV1029B Microwave Sensor Switch 

Wanlida Group Co., Limited

 	 120-277VAC 	 0-10V Bi-Level 	 IP65 	 Fixture Sensor 	 UL 	 Warranty: 2 years 	 Material: PC  

fixture sensor

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source90-240V/ACPower frequency50/60HzTransmission power&lt;0.2mWInstallation sitindoors, ceiling mountingHF system5.8GHz CW electric wave,ISM bandDetection Range1m/2m/3m/4m/5m/7m/9m/12m(radii.) (adjustable)Detection Angle360°(Ceiling installation)180°(wall installation)Working Temperature-15°C~+70°CInstallation sitCeiling mounting,Wall installationTime setting10sec/20sec/30sec/50sec/ 90sec /150sec/210sec/300sec  

PDLUX PD-MV1002 Microwave Sensor Switch 

This is a microwave sensor switch with a robust housing. It is professionally engineered for reliability and durability. This microwave sensor switch is easy to install and requires little maintenance. Power Source220-240VACPower Frequency50HzRated Load1200W/5A,Max,tungsten(cosφ=1)(220-240V/AC) 300W/2.5A,Max,fluorescent(cosφ=0.5)(220-240V/AC)HF system5.8GHz CW electric wave, ISM wave bandTransmission Power＜0.2mWPower ConsumptionApprox.0.5WDetection Range2-10m(radii.) (adjustable)Time Setting5sec±1sec - 30min±1min (adjustable)Light-control＜ 5~2000LUX (adjustable)Detection Angle360°Working Temperature-15°C~+70°CInstallation Sitindoors, ceiling mounting

Microwave Sensor Switch

Microwave Sensor Switch for reliable and easy installation

Huichuan Electric Limited Company of Weifang

Mosfet

Mosfet - 2N60, 4N60, 8N60 models available

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240VACPower Frequency50HzRated Load1000W Max.(220-240VAC) 400W Max.(100-130VAC)HF system5.8GHz CW electric wave, ISM wave bandTransmission Power＜0.2mWPower ConsumptionApprox.0.5WDetection Range3-9m (radii.) (adjustable)Time Setting8sec-10min (adjustable)Light-control10-300LUX~ daytime (adjustable)Detection Angle360°(Ceiling installation)Installation SitCeiling mounting, Wall installation 

PDLUX PD-MV1029A Microwave Sensor Switch 

HLS-CMA3

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240V/ACPower frequency50/60HzTransmission power&lt;0.3mWInstallation sitindoors, ceiling mountingHF system5.8GHz CW electric wave,ISM bandDetection Range1m-3m-6m-11m (radii.) (adjustable)Detection Angle360°Working Temperature-15°C~+70°CInstallation sitindoors, ceiling mountingTime setting8sec-1min-5min-12min, (adjustable)Light-control10LUX-50LUX-200LUX-1000LUX, (adjustable)Power consumptionapprox.0.5W 

PDLUX PD-MV1016A Microwave Sensor Switch 

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power Source100-240V/ACPower Frequency50/60HzRated Load1200W/5A,Max,tungsten(cosφ=1) 300W/2.5A,Max,fluorescent(cosφ=0.5)HF system5.8GHz CW electric wave, ISM wave bandProtection LevelIP20, Class IITransmission Power＜0.2mWPower ConsumptionApprox.0.5WDetection Range1-8m (radii.) (adjustable)Time Setting8sec-2min-6min-12min ( adjustable )Light-control10LUX-100LUX-150LUX- &gt;2000LUX ( adjustable )Detection Angle360°Working Temperature-15°C~+70°CInstallation Sitindoors, ceiling mounting  

PDLUX PD-MV1025 Microwave Sensor Switch 

HLS-T78

This is a high-frequency microwave sensor with a waterproof housing. It is professionally engineered to deliver reliable and stable performance. This high-quality microwave sensor is easy to install. Power SourceDC 25-80VOutput Current＜ 3AProtection LevelIP20, Class 2HF system5.8GHz CW electric wave, ISM wave bandTransmission Power＜0.3mWDetection Range1-8m (radii.) (adjustable)Time Setting8sec-12min ( adjustable)Light-control10 - 1000LUX(adjustable)Detection Angle360°(ceiling mounting)Working Temperature-15°C~+70°CInstallation Sitindoors, ceiling mounting  

PDLUX PD-MV1017MD-C Microwave Sensor Switch 

PDLUX PD MV1017MD C Microwave Sensor Switch

Power Source100-130VAC 220-240VACPower Frequency50/60HzLight-control8~30LUX＜5~100LUX (only for PD-P02 &amp; PD-P03)Rated Current6A10A

My Sourcing