Electronics

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

Consumer Electronics

elec

Find Consumer Electronics from the best B2B online marketplace. Find a reliable Consumer Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Consumer Electronics Suppliers and Manufacturers

AEI Protect-On Systems Ltd

HA-268-CS is the 8 zone alarm kit with auto-dialer. Features: Complete System Alarm Kit With Auto-DialerOne Stop Shopping Get A Perfectly Matched SystemIdeal System for Home &amp; Office ProtectionsBuilt-in with Auto-Dialer &amp; CommunicatorThe Alarm Kit Comprises:One HA-268 Alarm Control PanelOne Master Control KeypadTwo PIR-2712 Motion SensorsOne ES-12W Electronic SirenOne 16.5VAC/3A Heavy Duty Power Pack, AP-980Five MC-01 Magnetic ContactsOne PB-01 Panic ButtonThe System is ExpandableIdeal System for DIY &amp; Professional Users

Alarm Kit

HA 268 CS is an 8 zone alarm kit with auto dialer.

HA-266 is a compact auto-dialer alarm control panel with 6 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with a built-in full feature control console for ready installation.Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console.Features for Alarm 6 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 2 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 1.2Ah Back-up Battery (Not Included)12-16VDC OperationWeight: 1.2 Kg (The Control Panel); 220 g (The Keypad)Dimensions: 116(H) X 180(W) X 67(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel 

Alarm Control Panel with auto dialer and multiple protection zones

HA-278 is an 8+16 zone alarm control panel that comes with auto-dialer and communicator. The dialer sends voice message / SMS to four preset telephone number and communicator has two channels for sending alarm reports to two stand alarm monitor stations of Contact ID format.The protection zones and the alarm output facilities are compatible with most of the sensors and output devices on the market. HA-278 is expandable to 24 zones; it is ideal security system for business and residential protections. HA-278 is not app controlled. End-user can remote arm, disarm and checking alarm status on their mobile phone. Here are the QR code for the app control. Welcome to download the app to learn more. Features for HA-278 Alarm 8+16 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingCompatible to HX-2716 16-Zone ExpanderContact ID®Format Communicator, For Communication to MS-270 Monitor StationLCD Display Easy Programming KeypadProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC / 24VDC OperationWeight: 2.2 Kg (The Control Panel); 250 g (The Keypad)Dimensions: 268(H) X 263(W) X 78(D) mm (The Control Panel); 125(H) X 188(W) X 23(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable SMS Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel

HA 278 Alarm Control Panel with auto dialer and communicator

HA-266-CS is the 6 zone compact alarm kit with auto-dialer. Featuers: One stop shopping gets a perfectly matched alarm system.The alarm kit is prepared for people to get an alarm system with the perfectly matched components in one stop shopping for home and office protections. The HA-266-CS is a 6-Zone system with built-in auto-dialer and communicator. The system kit consists of the following components andit is expandable.One HA-266 standard alarm control panel.One PIR-2712 passive infrared motion detector.One ES-12W electronic siren.Five MC-01 magnetic contacts.One PB-01 panic button.One AP-960 12VDC/1.5A power adaptor.The size of the package: 320(W) x 146(D) x 300(H)mm.

HA 266 CS is a compact alarm kit with auto dialer.

    Protects shops, offices, residences, mobile homes &amp; boats, everybody affordable.    Two independent protection zones, instant and delay.    Home or away operation.    Built-in door chime and siren.    Facility for connecting optional remote arm-disarm switch.    Facility for connecting optional remote status indicator.    Facility for connecting door chime buttons.    End-of-line resistor supervisd, compatible with both N.C. &amp; N.O. sensors.    Fixed 60 seconds exit delay, 30 seconds entry delay &amp; 3 minutes alarm time.    Siren driver capable to drive 2 external 8 Ohm siren horns.    12VDC output wet relay contact for other alarm peripheral devices.    12-16VDC operation, 5mA low standby current.    Size: 87(H) x 120(W) x 33(D) mm.    Weight: 180 g.

Alarm Controller 

Alarm Controller for shops, offices, and residences

HA-268 is an auto-dialer alarm control panel with 8 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with one control console for ready installation. Each HA-268 comes with one alarm control panel and one full feature master control console. Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console. FEATURES FOR ALARM 8 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC Operation FEATURES FOR AUTO-DIALER Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

HA 268 auto dialer alarm control panel for home and office

The MS-270 + DM-270 is a complete equipment kit for setting up Alarm Monitor Station easily and straight forward for Building Management, Estate Management as well as District Security Control etc. at very low cost. It is an ideal equipment solution for Installor to setup monitor station for their clients at affordable cost; the keep service business afterward from years to years.  Features for MS-270: Easy Connection to DM-270 Alarm ReceiverReceiver Alarm and Status Signal from HA-278 Alarm Control PanelEasy Search Alarm and Status RecordAuto Backup Alarm and Status Record Over One YearSearch Client ConfigurationSetup and Modify Client ConfigrationSetup and Search Client MapUser Level for Different Account Features for DM-270: Fully Compatible with MS-270 Alarm Monitor Station SoftwareAccommodate 2 PSTN Telephone Lines for DTMF Signal Communication Simultaneous.Selectable for Single or Dual Telephone Line operation; Line 1, Line 2, or Line 1 + Line 224-Hour Telephone Line Fault Monitoring and Warning24-Hour USB Cable Link-up Lost Monitoring and WarningAutomatic Line Pick-up to Receive Incoming Signals from Clients Alarm SystemEncode and Decode All DTMF Alarm Report Signals to Data Codes for Monitor StationOn-board Jumper for Signal Level Optimization

Alarm Monitor Station

Alarm Monitor Station for building and estate management

Power View Ind'l Ltd

Ideal for side doors/windows. Mount it on the window and door with adhesive tape. Adjustable sensitivity for different environments.  #securityalarm #alarm #householdburglaralarmsystem #householdburglaralarm #homesecurityalarm #homesecurityalarmsystems #homesecurityalarmsystem #antiburglaralarm #homealarm #homealarmsystems #homealarmsystem #dooralarm #alarmsystem #windowalarm #sirenalarm 

Security Alarm 2 in 1 

Security Alarm 2 in 1 for doors and windows

HA-262 is a 6 zone high performance local alarm control panel designed to give economic solution for home and office protections. It features simple to use and simple to set up with minimum programming. The system is arm-disarm controlled with its build-in key switch. All main features are set up with the jumpers on the circuit board. Absolutely no learning is required. It is ideal for both "Do-it-yourself" and professional users. Features: 6 End-Of-Line Resistor Supervised Protection ZonesBuilt-in Key-switch for Arm-Disarm ControlFacility for Connection of Optional Arm-Disarm Control Stations for Multi-Station OperationSet Up Desired Functions with Jumper. No Learning Is RequiredAnti Vandal Resistance Metal CabinetProgrammable Time for Entry Delay and Alarm DurationExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual TestingMaximum 4 Keypads or Key Switches Can Be ConnectedForced to Arm with The Faulty Zone(s) BypassedHandover Option for The Instant ZonesRelay Output for Driving Siren/Bell or Strobe LightPower Low Watchdog Resets System

HA 262 is a versatile alarm control panel.

HA-263D &amp; HA-263K is a high performance local alarm control panel with 8 hardware protection zones in two partitions. The main advantage of it is all the main features are accomplished by direct jumper settings on the main circuit board. It is absolutely simple to set up and no learning is required. It is an ideal system for both “Do-It-Yourself” and professional users.The system is designed with two partitions in one enclosure. The two partitions are independently controlled for arm-disarm just like two alarm control panels, which gives the maximum flexibility for users convenience and protection arrangement. The lobby protection zone in the Common Partition is armed while both partition 1 and 2 are armed to give maximum protection; and it is disarmed while one of the partition is disarmed. This allows either partition to arm, while leaving the lobby for access into the other partition.The HA-263D comes with a Digital Keypad for arm-disarm control with user codes, which also offers additional features via programming through the keypad. The system can also work with key-switch and digital keypad in mixed operation.The HA-263K comes with one Key Switch Control Station for combined arm-disarm control of the whole system. Independent control of the two partitions requires two key switch control stations. The system can also work with key-switch and Digital Keypad in mixed operation.Features: Arm-disarm Controlled by Digital Keypad 8 Zones in Two Partitions Independently Programmable User Codes for Partition 1, 2, &amp; The Whole System User Codes Can Be 4-6 Digits Programmable Time for Entry Delay and Alarm Duration Each Protection Zone is Independently Programmable for Response Time Exit and Entry Warning Beeps On-Off Options Arm-Disarm Ring Back Indication On-Off Options Instant Arming Codes for Home and Away Operations Built-in Dynamic Battery Charger and Tester with Auto or Manual Testing On Board Software Zone for Panic Alarms Maximum 4 Control Keypads or Key Switches Can Be Connected Home or Away Operation Forced to Arm with The Faulty Zone(s) Bypassed Handover Option for The Instant Zones Facilities for Driving Siren/Bell, Satellite Siren and Strobe Light Power Low Watchdog Resets System Non-Volatile Memory 12V / 6.5Ah Back-up Battery (Not Included) 16.5VAC Operation Weight: 2.5 Kg (The Control Panel &amp; The Keypad) Dimensions: 270(H) X 265(W) X 78(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad) 

Alarm Control Panel with dual partition and programmable features

Anposi Products Ltd.

matter system alarm

Bestworld Corporation Limited 

     Single package size:10X5X4 cmSingle gross weight:0.200 kg   

Smart Home Security Wireless Remote Alarm System

Ideal for side doors/windows to safe guard your home. Mounted it on the door frame by adhesive tape. It gives out alarm sound instantly when someone opens doors or windows. Magnetic sensor detecting entries. 

SH777 Entry Alarm

SH777 Entry Alarm for home security with magnetic sensor

Peace Target Ltd

Door Window Sensor Alarm with Magnet Bar includes the following features : 	 Widely protecting shop, office, home or any entrance inside a house requiring protection 	 On / Off switch 	 Mini-sized 	 Magnet bar with magnetic sensor 	 Using 3 x 1.5V AG13 batteries (included) 	 Customized logos are available 	 Available in different colors  Material : 	 Plastic housing  Size closed : 	 Main body - Size of 5.1 x 3.8 x 1.9 cm 	 Magnet bar - Size of 5 x 1.4 x 1.4 cm  

Door Entry Alarm

Door Entry Alarm for home and office security

TFE HK Ltd

Featured here is an anti-tamper dual alarm that can be reset and suspended by infrared remote control. The rubberized housing offers protection against damage caused by dropping onto hard floors. A versatile mounting base and hanger are included for convenient attachment.
   Versions for pull cord operation or with optional sensor pads.   Nurse-call versions will connect to other systems for remote alarm signaling.   &quot;Suspend&quot; mode allows patient repositioning with adjustable stand-by time.   &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use.   2 alarm sounds and low or high volume settings.   &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems.   4-digit ID code to match remote control to alarm and eliminate interference.   Easy cleaning of pull cord.  

Nursecall Anti Tamper Dual Alarm

Nursecall Anti Tamper Dual Alarm with infrared remote control

MEINOE INDUSTRIAL (HK) COMPANY LIMITED

1: Turn on the switch, the indicator light will flashes, 5 seconds later, it will be working 2: When the product detects vibration. It will emits a 130db alarm. After 30 seconds, the alarm will stop. 3: Low battery LED indicator, when the voltage is below 3V,the indicator light will have a red flash at a frequency of once a second. 

MSA-816 Vibration Door Window Alarm

Shock sensor door alarm No installation is required Instant alarm detect any vibration. Used safety spotlight in dark area. Ideal for home, office, hotel, Travelers, etc... 

PV50 Door Guard Alarm w/Spotlight

 	 Using that for Door or window,It will emits 120-125DB sound to scare off bad guy if someone open the door or window without your permission.  

Doors and Windows Alarm

Doors and Windows Alarm emits 120DB sound for security.

 	 Name: Door/Window Alarm with Low voltage indicator 	 Model：MSA-820 &nbsp;&nbsp; 	 Size：75*39*12.2mm 	 Magnetic stripe size: 32*11.5*10mm 	 Product weight: 31g 	 MOQ：3000PCS 	 MEAS：450*300*240MM 	 G.W/N.W：9.5/8.8KGS 	 Material：ABS 	 Battery：3PCS*LR44 (include)  

Door/Window Alarm with Low Voltage Indicator

Door Window Alarm with Low Voltage Indicator

Venture Global Ltd

This Ultra Thin Door / Window Alarm can fit for many sliding doors and windows. This alarm is triggered either by vibration or entry opening. 	 Lifestyles aesthetic design 	 Ultra thin profile &lt; 8.5mm thick. Suit for most sliding doors windows 	 Alarm triggered after entry opened 	 Dual sensors allow magnet placed at left or right side 	 Dual tones:&nbsp;Siren or Bell&nbsp;Sound 	 Clear and Loud Sound 95dB 	 Built&nbsp;in&nbsp;window vibration sensor,&nbsp;can act as glass window broken alert 	 Cyclical alert capability if door / window remain opened 	 Warning sticker provided to alert potential intruder 	 Low battery consumption 	 Low battery power indicator 	 Easy access to replace battery from front cover&nbsp; 	 Powered by 2pcs of CR2032 batteries (included)  

Ultra Thin Door and Window Alarm

Ultra Thin Door and Window Alarm with dual sensors

High Technology Manufacturing Ltd

   POWER SOURCES : 100 - 240VAC~50/60 Hz 100Ma   OUTPUT POWER : 14.5VDC = 150Ma   DIMENSIONS : 178 x 78 x 325mm (WxDxH)   NET WEIGHT : 1.72 kg   APPLICATION : INDOOR USE only; For Industry, Warehouse, Personal Care, Residence, Commercial and Agribusiness.   PACKING :Gift box packing for 1 piece.  

Home Protector Alarm

Home Protector Alarm for indoor security and safety.

Shun Yuen Trading & Sourcing Company Limited

 	 Aluminum + PC +ABS 	 10W 	 100-240V 	 600lm 	 283 x 200 x 156mm  

Sensor Alarm Light

GUARDMAN® Wandering Prevention System is a DIY Elderly Monitoring System, ideal for alerting caregivers when persons with Impaired Memory Syndrome like Dementia OR with Alzheimer’s disease step out of the protected zone accidentally.  • The transmitters can be ideally placed on the door/window OR down the pathway leading to the Monitored Zone Exit. • Once the Transmitter is triggered, it will send a wireless signal to the Receiver unit, alerting the caregiver. • SUB-1G RF frequency with wireless transmission range up to 300m / 1,000ft (direct line of sight).  Wireless Door / Window Alarm (Transmitter) • Ultra-thin profile &lt;8.5mm thick. Suitable for installation on sliding doors/windows. • Transmits a wireless signal to the receiver unit and triggers an alert sound once the door/window is opened. • Loud 95dB alert sound. Dual tone selection. • Cyclical alert continues if the door/window is left open/unattended. • Low battery indication on the receiver unit. Wireless Indoor Motion Detector (Transmitter) • Can be placed down the pathway leading to the Protected Zone Exit. • PIR sensor detects range up to 7m and +/- 30 degrees. • Sensor with swivel joint design. • Transmits a wireless signal to the receiver unit when someone enters the monitored zone. • Low battery indication on the receiver unit. Wireless Entry Mat (Transmitter) • Slip resistant. Can be placed under the door mat/rug. • IP55 weather proof. • Transmits a wireless signal to the receiver unit when someone steps on the door mat/rug • Low battery indication on the receiver unit. Vibrating Pager (Receiver) • Loud sound up to 95dB. Selection of 18 different alarm tones available. • 3 selectable operating modes: sound / vibrating / sound &amp; vibrating. • Configurable with up to 4 different GUARDMAN® sensors / transmitters. • LED indicator icon available for each zone / channel. • Portable built-in belt clip 

Wandering Prevention System

Wandering Prevention System for elderly monitoring and safety.

Main unit size: 95*43*24mm Remote size:59.5*32.5*12mm Main unit weight: 38.2 g (without battery) Remote weight: 17.3 g (with battery) Decibel: 115-130dB Material：ABS Main battery: 3 AAA batteries Remote battery: 1 CR2032 battery Qty: 88PCS MEAS:42*33*24CM G.W/N.W:11.1/10.45kgs Function: Remote Control System Function DescriptionThis system offers a comprehensive set of features, including arming, disarming, a doorbell/vehicle locator, and a tilt alarm, all operable via a portable remote. 1. Pairing FunctionTo pair the remote with the main unit: Press and hold thePairing Button on the remote until you hear a "Beep" from the main unit. Then, briefly press theArm/Disarm Button to complete the pairing process. 2. Arming Function Briefly press theArm/Disarm Button. You will hear a "Do-Re-Mi" confirmation tone. The system will enter alert mode after a 5-second delay, confirmed by a single "Beep". If the alarm is triggered, you can press theArm/Disarm Button again to stop the alarm immediately and exit the armed state. 3. Disarming Function Briefly press theArm/Disarm Button. You will hear a "Mi-Re-Do" confirmation tone. The system will immediately exit the alert mode. 4. Doorbell &amp; Vehicle Find FunctionThis function uses two separate buttons: Briefly press theRingtone Select Button to cycle through 3 different ringtones. Briefly press theTrigger Button to sound the currently selected ringtone for 3 seconds, helping you locate your vehicle or use it as a doorbell. 5. SOS Function (Tilt Alarm)This feature triggers an alarm if the vehicle's tilt angle exceeds 60° (e.g., if it is being lifted or moved). Enter Setup Mode: Press and hold theFunction Setting Button on the remote until its indicator light turns off and then lights up steadily again. Initiate Calibration: Then, briefly press theArm/Disarm Button. The main unit will beep once to indicate it has entered posture calibration. The vehicle must remain still for 10 seconds. Calibration Result: Calibration Successful: The main unit will beep 5 times, indicating the function is now active. Calibration Failed: The main unit will beep 2 times, meaning you need to reinstall the main unit and repeat the process. Function Active: Once activated, the alarm will sound if the vehicle's tilt angle exceeds 60°. The alarm will stop automatically when the vehicle is returned to its original angle. 

My Sourcing