Electronics

elec

Find Electronics from the best B2B online marketplace. Find a reliable Electronics supplier, vendor, manufacturer or distributor to get free quote on HKTDC Sourcing.

Electronics Suppliers and Manufacturers

AEI Protect-On Systems Ltd

HA-278 is an 8+16 zone alarm control panel that comes with auto-dialer and communicator. The dialer sends voice message / SMS to four preset telephone number and communicator has two channels for sending alarm reports to two stand alarm monitor stations of Contact ID format.The protection zones and the alarm output facilities are compatible with most of the sensors and output devices on the market. HA-278 is expandable to 24 zones; it is ideal security system for business and residential protections. HA-278 is not app controlled. End-user can remote arm, disarm and checking alarm status on their mobile phone. Here are the QR code for the app control. Welcome to download the app to learn more. Features for HA-278 Alarm 8+16 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingCompatible to HX-2716 16-Zone ExpanderContact ID®Format Communicator, For Communication to MS-270 Monitor StationLCD Display Easy Programming KeypadProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC / 24VDC OperationWeight: 2.2 Kg (The Control Panel); 250 g (The Keypad)Dimensions: 268(H) X 263(W) X 78(D) mm (The Control Panel); 125(H) X 188(W) X 23(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable SMS Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel

HA 278 Alarm Control Panel with auto dialer and communicator

TFE HK Ltd

The Anti-Tamper alarm is a helpful assistant for caregiver. The latest alarm technology can only be turned off by either infrared (IR) remote control or a Reset Key. This eliminates the risk of the alarm being turned off by the person under care without being attended to by the caregiver. It works as a local alarm or can connect into a multi point Nursecall system with a suitable connecting cable. There are two alarm sounds, with adjustable volume and a silent mode for use with Nursecall systems that operate on remote alarm signaling. It can be wall mounted or fitted to beds, chairs or wheelchairs with the two different size mounting hooks included. The system uses a 4 digit ID code to match each remote control tot he monitor and eliminates interference from other systems. Low battery indicator is incorporated. 

Nursecall Anti-Tamper Alarm

Nursecall Anti Tamper Alarm for caregiver assistance

HA-268-CS is the 8 zone alarm kit with auto-dialer. Features: Complete System Alarm Kit With Auto-DialerOne Stop Shopping Get A Perfectly Matched SystemIdeal System for Home &amp; Office ProtectionsBuilt-in with Auto-Dialer &amp; CommunicatorThe Alarm Kit Comprises:One HA-268 Alarm Control PanelOne Master Control KeypadTwo PIR-2712 Motion SensorsOne ES-12W Electronic SirenOne 16.5VAC/3A Heavy Duty Power Pack, AP-980Five MC-01 Magnetic ContactsOne PB-01 Panic ButtonThe System is ExpandableIdeal System for DIY &amp; Professional Users

Alarm Kit

HA 268 CS is an 8 zone alarm kit with auto dialer.

HA-263D &amp; HA-263K is a high performance local alarm control panel with 8 hardware protection zones in two partitions. The main advantage of it is all the main features are accomplished by direct jumper settings on the main circuit board. It is absolutely simple to set up and no learning is required. It is an ideal system for both “Do-It-Yourself” and professional users.The system is designed with two partitions in one enclosure. The two partitions are independently controlled for arm-disarm just like two alarm control panels, which gives the maximum flexibility for users convenience and protection arrangement. The lobby protection zone in the Common Partition is armed while both partition 1 and 2 are armed to give maximum protection; and it is disarmed while one of the partition is disarmed. This allows either partition to arm, while leaving the lobby for access into the other partition.The HA-263D comes with a Digital Keypad for arm-disarm control with user codes, which also offers additional features via programming through the keypad. The system can also work with key-switch and digital keypad in mixed operation.The HA-263K comes with one Key Switch Control Station for combined arm-disarm control of the whole system. Independent control of the two partitions requires two key switch control stations. The system can also work with key-switch and Digital Keypad in mixed operation.Features: Arm-disarm Controlled by Digital Keypad 8 Zones in Two Partitions Independently Programmable User Codes for Partition 1, 2, &amp; The Whole System User Codes Can Be 4-6 Digits Programmable Time for Entry Delay and Alarm Duration Each Protection Zone is Independently Programmable for Response Time Exit and Entry Warning Beeps On-Off Options Arm-Disarm Ring Back Indication On-Off Options Instant Arming Codes for Home and Away Operations Built-in Dynamic Battery Charger and Tester with Auto or Manual Testing On Board Software Zone for Panic Alarms Maximum 4 Control Keypads or Key Switches Can Be Connected Home or Away Operation Forced to Arm with The Faulty Zone(s) Bypassed Handover Option for The Instant Zones Facilities for Driving Siren/Bell, Satellite Siren and Strobe Light Power Low Watchdog Resets System Non-Volatile Memory 12V / 6.5Ah Back-up Battery (Not Included) 16.5VAC Operation Weight: 2.5 Kg (The Control Panel &amp; The Keypad) Dimensions: 270(H) X 265(W) X 78(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad) 

Alarm Control Panel with dual partition and programmable features

HA-268 is an auto-dialer alarm control panel with 8 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with one control console for ready installation. Each HA-268 comes with one alarm control panel and one full feature master control console. Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console. FEATURES FOR ALARM 8 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 4 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 6.5Ah Back-up Battery (Not Included)16.5VAC Operation FEATURES FOR AUTO-DIALER Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

HA 268 auto dialer alarm control panel for home and office

HA-266 is a compact auto-dialer alarm control panel with 6 hardware protection zones and 2 software zones for panic and duress alarms, which is designed for home and office protections. The system gives local alarm warnings as like the traditional alarm systems as well as sending voice message to 4 telephones of pre-set numbers when alarm occurs. The auto dialer is compatible with all the public telephone systems. The control panel comes with a built-in full feature control console for ready installation.Auxiliary control consoles can be purchased separately. Both types of consoles are back lighting and have the same function except the built-in microphone for message recording is not available on the auxiliary control console.Features for Alarm 6 Zones, Programmable for Instant, Delay (2 delay time available), 24 Hour Instant or 24 Hour Silent Alarm ReportingProgrammable Master Code and 8 User CodesAll User Codes with Duress FunctionProtection Zones are Programmable for Single or Multiple TriggeringProgrammable Time for Exit, Entry (2 timings) and Alarm DurationArm-Disarm Control from Keypad or Remotely from Any DTMF Telephone mobile PhoneEach Protection Zone is Programmable for Response TimeExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsInstant Arming Codes for Home and Away OperationsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual Testing OptionsTwo On Board Software Zone for Panic and Duress AlarmsMaximum 2 Control Keypads Can Be ConnectedHome or Away OperationForced to Arm or Arm Prohibited OptionsHandover Option for The Instant ZonesFacilities for Driving Siren/Bell, Satellite Siren and Strobe LightPower Low Watchdog Resets SystemNon-Volatile MemoryCan be Arm-Disarmed by Conventional Key SwitchFull Feature Default Values in System for Ready Use12V / 1.2Ah Back-up Battery (Not Included)12-16VDC OperationWeight: 1.2 Kg (The Control Panel); 220 g (The Keypad)Dimensions: 116(H) X 180(W) X 67(D) mm (The Control Panel); 117(H) X 117(W) X 27(D) mm (The Keypad)Features for Auto-dialer Four 32 Digit Telephone Numbers for Auto-DialerTwo 32 Digit Telephone Numbers for CommunicatorCommunicator Data in DTMF Format with Check-sumTone or Pulse DialingProgrammable Pause Time between Any DigitsVoice Message and Numeric Message are Possible20 Seconds Non-Volatile User Programmable Voice MessageControllable Listen-in DurationBack-up or Non-back-up Dialing for Alarm ReportingAutomatic Telephone Line Fault DetectionProgrammable Dialing Attempts, 8 MaximumProgrammable Message Repeats, 8 MaximumTelephone Numbers can be Tested Individually

Alarm Control Panel 

Alarm Control Panel with auto dialer and multiple protection zones

HA-262 is a 6 zone high performance local alarm control panel designed to give economic solution for home and office protections. It features simple to use and simple to set up with minimum programming. The system is arm-disarm controlled with its build-in key switch. All main features are set up with the jumpers on the circuit board. Absolutely no learning is required. It is ideal for both "Do-it-yourself" and professional users. Features: 6 End-Of-Line Resistor Supervised Protection ZonesBuilt-in Key-switch for Arm-Disarm ControlFacility for Connection of Optional Arm-Disarm Control Stations for Multi-Station OperationSet Up Desired Functions with Jumper. No Learning Is RequiredAnti Vandal Resistance Metal CabinetProgrammable Time for Entry Delay and Alarm DurationExit and Entry Warning Beeps On-Off OptionsArm-Disarm Ring Back Indication On-Off OptionsBuilt-in Dynamic Battery Charger and Tester with Auto or Manual TestingMaximum 4 Keypads or Key Switches Can Be ConnectedForced to Arm with The Faulty Zone(s) BypassedHandover Option for The Instant ZonesRelay Output for Driving Siren/Bell or Strobe LightPower Low Watchdog Resets System

HA 262 is a versatile alarm control panel.

Featured here is an anti-tamper dual alarm that can be reset and suspended by infrared remote control. The rubberized housing offers protection against damage caused by dropping onto hard floors. A versatile mounting base and hanger are included for convenient attachment.
   Versions for pull cord operation or with optional sensor pads.   Nurse-call versions will connect to other systems for remote alarm signaling.   &quot;Suspend&quot; mode allows patient repositioning with adjustable stand-by time.   &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use.   2 alarm sounds and low or high volume settings.   &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems.   4-digit ID code to match remote control to alarm and eliminate interference.   Easy cleaning of pull cord.  

Nursecall Anti Tamper Dual Alarm

Nursecall Anti Tamper Dual Alarm with infrared remote control

MEINOE INDUSTRIAL (HK) COMPANY LIMITED

 	 Size: 67 x 45 x 34mm 	 Product weight : 30.2g 	 QTY:120PCS 	 MEAS: 37 x 35 x 32CM 	 G.W/N.W:8/6KGS  

Personal Alarm

 	 Size: 50 x 50 x 23mm 	 Product weight: 32.1g 	 QTY: 200PCS 	 MEAS: 37 x 35 x 32cm 	 G.W/N.W:10/9KGS  

Power View Ind'l Ltd

Shock sensor door alarm No installation is required Instant alarm detect any vibration. Used safety spotlight in dark area. Ideal for home, office, hotel, Travelers, etc... 

PV50 Door Guard Alarm w/Spotlight

 The anti-tamper car alarm is equipped with a rubberized housing for protection against damage caused by dropping onto hard floors. The compact design allows efficient use of space. The &quot;suspend&quot; mode allows patient repositioning with adjustable stand-by time.  	 Versions for sensor pads only. 	 Tamper-free resetting and suspension by infrared remote control. 	 Nurse-call versions will connect to other systems for remote alarm signaling. 	 &quot;Reset&quot; mode puts the alarm into stand-by situation until re-activation by next use. 	 2 alarm sounds and low or high volume settings. 	 &quot;Silent&quot; mode for use with remote alarm signaling nurse-call systems. 	 4-digit ID code to match remote control to alarm and eliminate interference. 	 Easy cleaning of pull cord. 	 Versatile mounting bass and hanger included.  

Anti-Tamper Care Alarm

Anti Tamper Care Alarm with remote control and adjustable settings

1: Turn on the switch, the indicator light will flashes, 5 seconds later, it will be working 2: When the product detects vibration. It will emits a 130db alarm. After 30 seconds, the alarm will stop. 3: Low battery LED indicator, when the voltage is below 3V,the indicator light will have a red flash at a frequency of once a second. 

MSA-816 Vibration Door Window Alarm

Size:66*48*25MM Product weight: 41g QTY:100PCS MEAS:37*35*32CM G.W/N.W:7.4/6.8KGS

Personal Alarm with PIR

 	 Model: MSA-810 &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 	 Size: 66x48x25MM 	 Product weight: 41G 	 MOQ: 3000 PCS 	 MEAS: 37x35x32 CM 	 G.W/N.W: 7.4/6.8 KGS 	 Materials: ABS&nbsp; 	 Battery: 3PCSxLR44  

Personal Alarm with PIR Function

The MS-270 + DM-270 is a complete equipment kit for setting up Alarm Monitor Station easily and straight forward for Building Management, Estate Management as well as District Security Control etc. at very low cost. It is an ideal equipment solution for Installor to setup monitor station for their clients at affordable cost; the keep service business afterward from years to years.  Features for MS-270: Easy Connection to DM-270 Alarm ReceiverReceiver Alarm and Status Signal from HA-278 Alarm Control PanelEasy Search Alarm and Status RecordAuto Backup Alarm and Status Record Over One YearSearch Client ConfigurationSetup and Modify Client ConfigrationSetup and Search Client MapUser Level for Different Account Features for DM-270: Fully Compatible with MS-270 Alarm Monitor Station SoftwareAccommodate 2 PSTN Telephone Lines for DTMF Signal Communication Simultaneous.Selectable for Single or Dual Telephone Line operation; Line 1, Line 2, or Line 1 + Line 224-Hour Telephone Line Fault Monitoring and Warning24-Hour USB Cable Link-up Lost Monitoring and WarningAutomatic Line Pick-up to Receive Incoming Signals from Clients Alarm SystemEncode and Decode All DTMF Alarm Report Signals to Data Codes for Monitor StationOn-board Jumper for Signal Level Optimization

Alarm Monitor Station

Alarm Monitor Station for building and estate management

 	 Size:42 x 33 x14.5MM 	 Product weight: 20g 	 QTY:200PCS 	 MEAS: 370 x 350 x 320m 	 G.W/N.W:5.9/5.3KGS  

Peace Target Ltd

Door Window Sensor Alarm with Magnet Bar includes the following features : 	 Widely protecting shop, office, home or any entrance inside a house requiring protection 	 On / Off switch 	 Mini-sized 	 Magnet bar with magnetic sensor 	 Using 3 x 1.5V AG13 batteries (included) 	 Customized logos are available 	 Available in different colors  Material : 	 Plastic housing  Size closed : 	 Main body - Size of 5.1 x 3.8 x 1.9 cm 	 Magnet bar - Size of 5 x 1.4 x 1.4 cm  

Door Entry Alarm

Door Entry Alarm for home and office security

Venture Global Ltd

Keep your office safe from intruders and unwelcomed visitors with this wireless indoor motion detector. This highlighted wireless indoor motor detector is equipped with a PIR sensor that has a detecting range for up to seven meters. It also features a random pairing code to avoid interference. Once paired with multi-alert receivers like DCX25 or DCX-800, this indoor motor detector effectively transmits wireless signals to the receiver when a person entered the monitored zone. Take your office’s security system to a whole new level with this trusty wireless indoor motion detector. Supports SUB-1G RF frequency 868MHz / 915MHz wireless operation.Transmit range can go up to 300 m / 1,000 ft (direct line of sight).Transmit range also subjects to the receiver.With random pairing code to avoid interference.The built-in PIR sensor has a detection range that is up to 7 m and +/- 30 degrees.Features a swivel joint sensor.Comes with a power on / off switch.Timer setting: 5 minutes or 5 seconds for sleep mode.Compatible with multi-alert receiver: MA-1000, DCX-900, DCX-800, DCX-25 and DWA-800.Powered by a piece of 9V battery.

Wireless Indoor Motion Detector System 

Wireless Indoor Motion Detector System for enhanced office security

    Protects shops, offices, residences, mobile homes &amp; boats, everybody affordable.    Two independent protection zones, instant and delay.    Home or away operation.    Built-in door chime and siren.    Facility for connecting optional remote arm-disarm switch.    Facility for connecting optional remote status indicator.    Facility for connecting door chime buttons.    End-of-line resistor supervisd, compatible with both N.C. &amp; N.O. sensors.    Fixed 60 seconds exit delay, 30 seconds entry delay &amp; 3 minutes alarm time.    Siren driver capable to drive 2 external 8 Ohm siren horns.    12VDC output wet relay contact for other alarm peripheral devices.    12-16VDC operation, 5mA low standby current.    Size: 87(H) x 120(W) x 33(D) mm.    Weight: 180 g.

Alarm Controller 

Alarm Controller for shops, offices, and residences

PIR-2712 is a general purpose PIR sensor. It is designed to give a cost effective and reliable solution for the residential and commercial security systems. PIR-2712 employs a low noise dual-element pyro-sensor and an MCU device in security logic and environmental controls. The alternate polarity signal processor inside the MCU has very high rejection to noise dur to radio interference or power surges. The MCU device also provides the functions of digital pulse counting, power-up delay and alarm output timing and controls. All of which maximises security and false alarm immunity. Features: Low noise dual element pyro-sensorAlternate polarity signal processingSecurity logics are integrated in the MCU deviceSurface-mount component technology, great EMI and RFI immunityNormal or pulse count response for harsh environmentsNC or NO contact for alarm output 

Passive Infrared Intrusion Detector

Passive Infrared Intrusion Detector for reliable security solutions

Hang this small light sensor alarm in your medical box, cabinet, handbag, private documents or everywhere you need to protect, it will give out siren instantly when someone is opening them. Adjustable Hi/Low sensitivity for different environments. 

SH268 Light Sensor Alarm

SH268 Light Sensor Alarm for security and protection

Entry Chime Mode: Mount it beside door and it will automatically give Ding Dong melody when someone open the door. Entry Alarm Mode: It will automatically alert high output siren when someone is opening the door. Easily mounted on door frame by adhesive tape. Magnetic sensor detects entry. 

SH1010 Twins Guard

SH1010 Twins Guard door alarm with entry chime and alert

 130 db Personal Alarm with LED and Keyring includes the following features :     Press the left button to turn on LED   Press the right button to initiate alarm   Volume: 130db   Using 3 x AG13 batteries (included)   Keyring included   Customized logos are available   Material :    ABS housing   Size closed :    5 x 5 x 2 cm  

My Sourcing