GRAND QIN TRADE CO.,LIMITED

12v12ah

12v7ah

Zhangzhou Huawei Power Supply Technology Co., Ltd

Car Battery

6v7ah

Chung Hoi Electronic (H.K.) Limited

 	 Input Voltage  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 100-240V 50-60Hz 	 Output Voltage  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 6V/12V AUTO 	 Output Current  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1A/4A (48W) 	 Battery Type  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Wet Gel MF EFB AGM &amp; LioN 	 Housing  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Fire retardant plastic, IP65 	 Operation Temperature  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; -10℃ to 45℃ 	 Warranty  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; One year 	 Ideal&nbsp; to charge and maintenance battery with the 1A/4A charging current for your 6V and 12V battery, fully automatically detected and selected the voltage setting. 	 8 steps fully automatic switch mode charging for greater power absorption 	 12V 4A charging current and able to handle battery size up 150Ah 	 Battery condition detection and polarity protection 	 Dead or unresponsive battery detection 	 Fully automatic with trickle charging 	 Water resistance IP65, rating&nbsp; 	 Spark Free System 	 SC/OL protections 	 Polarity detection 	 Step1. Qualification  Initially ensures that the battery is in good condition prior to charge. As a safety measure charge process will not begin if battery is below 7.5V. 	 Step2. Pulse Mode  &nbsp;Pulse mode provides a pulse charge to help the newly recovered battery to continue to accept charge as it enters the reconditioning phase. 	 Step3. Recondition  The reconditioning phase continues to work the battery at a slightly higher voltage and amperage to &ldquo;re-activate&rdquo; the battery plates for improved depth of charge and charge acceptance. 	 Step4. Bulk  With the battery now through Pulse and reconditioning phases and well on its way to full recovery, the bulk charge phase gives the battery constant current taking the battery up to 80% of its capacity. 	 Step5. Absorption  In the absorption phase the battery is given constant voltage while the charge current is gradually reduced according to raise of battery voltage. 	 Step6. Full  The charge will stop until the battery is 100% charged. 	 Step7. Analysis  Battery will now checked to be sure that it is holding a charge properly and the charger will make a determination and pass the battery for service, or not. 	 Step8. Maintenance  The battery charger keeps under control the voltage of the battery.

Smart Car Battery charger

Smart Car Battery Charger for 6V and 12V batteries

12v33ah

4v4ah

Vanson Electronics Ltd

I/P: 100-240V AC 50-60Hz, 18W O/P: 6V/12V DC 800mA With fixed DC cable, includes 2.5x5.5mm detachable plug and a cable with black &amp; red clamps Features: * Worldwide use - input voltage 100-240VAC * Recharge 6V/12V sealed lead-acid battery * With LED indicator (Red LED light on- indicates charging, Flashing Red LED- indicates charge is completed, LED off- indicates bad cell or wrong connection for polarity) * Voltage AUTO DETECT technology - Automatically adjust to accommodate 6V or 12V sealed Lead-acid battery * Flexible connection - connect the SLA battery via alligator clamps or a DC barrel plug (2.5x5.5mm) * Safety timer control, Reverse polarity &amp; Short circuit protection   

6V/12V Sealed Lead-Acid Battery Charger

Kaiying Power Supply & Electrical Equip Co Ltd

LONG WAY electric toy car batteries are specifically designed and developed for children's electric ride-on cars and electric scooters. They utilize a special lead paste formula and battery formation process to ensure advantages such as long cycle life, low self-discharge rate, and robust storage capacity. Our products meet the requirements of IEC and DOE energy efficiency standards and are certified by UL, CE, and RoHS. They can be shipped by sea or air. These batteries not only provide durable power support but also prioritize safety and environmental friendliness. Their advanced design and manufacturing processes ensure reliability and stability in various application conditions. For children's electric ride-on cars and scooters, these batteries serve not only as power sources but also as safety and reliability guarantees. UL, CE, and RoHS certifications further attest to the quality and compliance of our products, providing users with added confidence and peace of mind. Whether shipped by sea or air, we are committed to delivering our products to customers in the safest and fastest manner possible, ensuring they can enjoy high-quality battery products as soon as possible. 

LONG WAY 24V7 Ah Electrical toy car battery

Shenzhen Southking Technology Co Ltd

 	 Multi-function&nbsp; 	 12V Car Emergency jump starter/Car battery  

Car Jump Start

Car Jump Start for emergency battery needs

Guangzhou Allpowers Ind'l Int'l Ltd

No more drainage with this 7.5-watt, solar-powered car battery charger. Intended to provide an excellent solution for charging the batteries of various vehicles, it can be easily installed and directly connected to the battery with the equipped clasps.

&bull; Rectangular solar panel.
&bull; Voltage: 12V, 18V.
&bull; Power: 7.5W.
&bull; Two small battery clasps.
&bull; Slim and portable.
&bull; Easy to install.

Solar Car Battery Charger

Solar Car Battery Charger for easy vehicle battery charging

Manson Engineering Ind'l Ltd

Optimal Efficiency 92% with Digital ControlThe high power conversion efficiency allows quiet and cooling running of the charger and can provide continuous full loadoperation at 40°C ambient temperature. Designed to cover old and new types of car alternatorsThe SBC-6104 are designed to address to the issues of wide swing of output voltages from the smart alternator, braking regenerative EURO 5/6 vehicles in fully charging the house battery. They are also suitable for use with distant house battery. The charger Booster provides fast safe charging profiles for 4 types of lead based and 2 types of Lithium FePO4 batteries. Multistage ChargingThis is a select (battery type) and forget charger designed for fast accurate and safe recharge of your deep cycle house battery banks. The (digital control) smart multistage charging enables the charger to be connected permanently to your battery banks without the worry of over charging or drying out the electrolyte. Lead acid based BatteryA 3 Stage Bulk, Absorption &amp; Float charging profile for 4 types of lead acid based battery with maximum constant charging current at the Bulk Stage and a Constant Voltage with decreasing charging at the Absorption Stage and a reduced voltage Float Charge for maintenance when battery is full. LiFePO4 (LFP) BatteryA 2 Stage charging is specially for 2 types LiFePO4 battery and charging current stops at the end of Absorption stage. Three charge control methods: Ignition Control:Charger starts charging only when ignition is on and stops charging when Ignition is off.This is the recommended control as it is safer and allows for large input voltage range. Input Voltage Control:This is for non-intelligent or older type alternators with sufficient high &amp; uniform voltage.Charging is cut off easily due to high threshold voltage to protect the starting battery. Vibration Sensor Control:Charger starts charging when repeated vibrations are detected and stops charging when no vibration is detected for over 2 minutes.The built-in vibration sensor makes it possible to use the charger by just connecting to the starter terminal without touching the car’s electrical/electronic wiring thus avoiding any possible excuse for revoking the car’s warranty.Features 480Watt power conversion efficiency &gt;90%.6 selective charging profiles suitable for charging for the most lead acid &amp; Lithium FePO4 batteries.Supplied with a remote Battery temperature sensor to ensure precise and safe charging in large temperature variation.3 types of operation control to choose for specific situation.Alarm signal (fault or not charging) available to integrate with your system.Thermostatically speed control Fan.Protections:Self recoverable Input under Voltage protection.Self recoverable Input over Voltage protection.Self recoverable Output over Voltage protection.Self recoverable Overcurrent protection.Self recoverable Charger over temperature protection. 

SBC-6000 Series DC-DC In-Car Charger for Lead and LFP Batteries

SBC 6000 Series DC DC In Car Charger for Lead and LFP Batteries

Shenzhen Leagend Optoelectronics Co Ltd

	Simple and easy to test the life of battery	Test batteries on and off the vehicle	Accurate results in milliseconds	Battery Life Analysis	Analysis Result : Good or Replace	Large easy to read LCD display.	Test results based on JIS, EN, DIN, SAE and IEC Standards.	Languages: English, Spanish, French, German, Italian, Polish	Quick test—input battery volume (AH), then it can show the battery status.	vehicle cranking system test--- cranking time, voltage and status.	vehicle charging system test—load voltage, unloaded voltage, ripple status and charging system status.	Store the testing result, print function	Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.	System voltage: 12 Volts	Input voltage range: 9V~15V	Power requirements: No internal batteries required. Power on when hooked up during testing.	Testing range: 100 ~ 2000 CCA, 100 ~ 1000 DIN, 100 ~ 1000 IEC, 100 ~ 1700 EN	AH range: 30-220AH

12V Auto Battery Tester

12V Auto Battery Tester for accurate battery life analysis

Precision Enterprise Ltd

12V, 4A Slim Compact Smart Battery Charger
4A smart car battery charger for 12V vehicles, and recommended for START/STOP batteries. Ideal for cars, motorcycles, lawn mowers, boats, jet skis, quad bikes and more.
Compatible with lead acid, gel, calcium, EFB and AGM batteries. The smart charge cycle charges the battery twice as fast as a standard car battery charger, and protects against overcharging. Slim line design makes it easy to store, while the one-button functionality makes it easy to use. The charger automatically detects the battery condition and applies the most suitable charging cycle.
Includes maintenance mode for long-term connection. Ideal for keeping infrequently used batteries in good condition. Rated IP65, making it waterproof for charging outdoors.

Features: 	 Fast, powerful charging 	 Slim design is easy to store 	 Suitable for 12V vehicles 	 Recommended for START/STOP vehicles 	 Touch bar to manual or automatic select slow 1A or fast 4A charging 	 Suitable for lead acid, calcium, EFB and AGM battery 	 Repairs and protects to improve battery health 	 Includes maintenance mode, ideal for long term connection 	 Multiple protection 	 Overheating Protection Short-circuit Protection 	 Reverse-polarity Protection Spark-proof Protection 	 Certificate: CE, RoHS, IEC, IP65 	 Weight: 0.506 KGS  
Package Includes: 	 1 x main car battery charger 	 1 x clamp cable 	 1 x O-ring cable 	 1 x manual  

ProUser Super Slim Compact Smart Battery Charger PSL Series

ProUser Super Slim Compact Smart Battery Charger for 12V vehicles

LONG WAY 6V4.5Ah Electrical toy car battery

LONG WAY 6V4 5Ah Electrical toy car battery

 	 Simple and easy to test the life of battery 	 Test batteries on and off the vehicle 	 Accurate results in milliseconds 	 Battery Life Analysis 	 Analysis Result : Good or Replace 	 Large easy to read LCD display. 	 Test results based on JIS, EN, DIN, SAE and IEC Standards. 	 Languages: English, Spanish, French, German, Italian, Polish 	 Quick test&mdash;input battery volume (AH), then it can show the battery status. 	 vehicle cranking system test--- cranking time, voltage and status. 	 vehicle charging system test&mdash;load voltage, unloaded voltage, ripple status and charging system status. 	 Store the testing result, print function 	 Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported. 	 System voltage: 12 Volts 	 Input voltage range: 9V~15V 	 Power requirements: No internal batteries required. Power on when hooked up during testing. 	 Testing range: 100 ~ 2000 CCA, 100 ~ 1000 DIN, 100 ~ 1000 IEC, 100 ~ 1700 EN 	 AH range: 30-220AH  

 	 Type: AGM (absorbed glass mat) battery. 	 12V120AH. 	 Rechargeable valve regulated lead-acid battery. 	 Rectangular housing. 	 Two round metallic connectors on top. 	 With handles on the sides. 	 Displaying product data on the exterior. 	 Functional and durable. 	 Harmonization system (HS) code: 8507200000.  

AGM Battery

AGM Battery - 12V120AH rechargeable valve regulated lead acid battery

 	 6V/12V, 1A Slim Compact Smart Battery Charger 	 1A Slim smart charger for battery maintenance, ideal for connecting to infrequently used vehicles including classic cars, second cars, motorcycles, lawn mowers and more. Suitable for 6V and 12V vehicles and recommended for START/STOP batteries. 	 Compatible with lead acid, gel, calcium, EFB and AGM batteries. Smart charge maintenance cycle keeps batteries in good condition, without overcharging. 	 The compact design makes it easy to store, and the simple interface makes it easy to use: simply connect and select 6V or 12V. Rated IP65, making it waterproof for charging outdoors. 	 &nbsp; 	 Features: 	 Fast, powerful charging 	 Slim design is easy to store 	 Suitable for 6V/12V vehicles 	 Recommended for START/STOP vehicles 	 Touch bar to manual or automatic select voltage 	 Suitable for lead acid, calcium, EFB and AGM battery 	 Repairs and protects to improve battery health 	 Includes maintenance mode, ideal for long term connection 	 Multiple protection 	 Overheating Protection Short-circuit Protection 	 Reverse-polarity Protection Spark-proof Protection 	 Certificate: CE, RoHS, IEC, IP65 	 Weight: 0.442 KGS 	 &nbsp; 	 Package Includes: 	 1 x main car battery charger 	 1 x clamp cable 	 1 x O-ring cable 	 1 x manual  

ProUser Super Slim Compact Smart Battery Charger for 6V and 12V vehicles

Functions: 1.Receives notifications of battery conditions in Bluetooth range. 2.Checks vehicle cranking system automatically while engine is starting. 3.Checks charging system (alternator) 4.Lists the time of each driving. 5.Alerts mobile phone if detects abnormal data. 6.Short-circuit and reverse connection protection. 7.Data stored in battery monitor up to 35 days if out of sync. 8.Automatic synchronization when in Bluetooth range. 9.Compatible with all 12V vehicle batteries. 10.Shows historical data graphically. 11.Engine starting detection automatically. 12.Free app for iOS and Android.  Basic Features: 1.Alert users if charge is low. 2.Review charge history in graph mode. 3.Show the state of charge of battery in real time. 4.Near-Filled perception to get notification automatically.  Support mobiles: All iOS and Android smart phone with Bluetooth 4.0 iOS (iPhone 4S,5, 5C, 5S and later；iPad 2，iPad Air，iPad mini，iPad mini 2 and later) Android: at least Android 4.3 (support for Bluetooth 4.0 phones)  Vehicle Coverage All 12V batteries, including motorcycle, car, SUVs, MPVs, light trucks, trucks, and boats. Including the Lead-Acid, AGM, GEL, EPB, Lithium metal batteries.    Bluetooth Name: Battery Monitor App Name: BM2 Operating Temperature: -40-90℃ Input Voltage: 8V-16V Current: 1mA Voltage Accuracy: ±0.03V Short-circuit Protection: built in Reverse Connection Protection: built in Dimensions: Length: 55mm * Width: 35mm * Height: 15mm Weight: 32g  

Wireless 12V battery monitor for android and iOS phones

 	 Type: MF super sealed battery. 	 12V14AH/10HR. 	 Rectangular housing. 	 Two metallic connectors on top. 	 Labeled with &ldquo;+&rdquo; and &ldquo; -&rdquo;. 	 Efficient power supply. 	 Long life cycle. 	 Ideal for car use.  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?