IDP Power Technology Ltd

 Constant current &ndash; Multi-Power Series ( MP Series) 
- Dimmable CC output (with multi-power function)
- Higher flexibility and Reliability LED driver solution
- Multi-Power solution with different output current selection
- Dimmable by leading edge or trailing edge dimmer
-&nbsp;16W and 28W rated&nbsp; power available&nbsp;

Dimmable Constant Current LED Driver

Keytec Technology Co Ltd

KEYTEC is members of the Digital lllumination Interface Alliance(DiiA), we manufacter LED drivers and different DALI products. we have more than 150 drfferent model. contact us about this issue. we have OEM 485-DALI, DT5, touch panel.....we are top team for LED drivers OEM. contact us for more information. we also have triac driver for small downlighting.  

DALI Dimmable Driver

Zhuhai Shengchang Electronics Co., Limited

Setting address by NFC/RDM, Waterprooof. Output: 30W-300W, 1CH-5CH, Constant voltage and constant current. Junction box is available Continuous and smooth dimming  

DMX512 dimmable LED driver 

Kaoyi Group SPA

The latest flicker-free technology from Kaoyi allows the flicker percentage of our drivers to stay below 2% at all dimming range. With synchronous dimming and synchonous start technology, we are capable of providing the most comfortable lighting experience to our users. One of our flicker-free driver series has a VR designed on the housing for users to manually adjust minimum brightness, ensuring identical performance between mutiple lamps connected. The isolated circuit and third-party certification ensure no safety risks on product design. The extent of compatibility is in inverse proportional to product efficiency. Our efficiency compensation technology recognizes the present situation and automatically compensate when needed; simultaneously, it elevates the efficiency of the driver without affecting its compatibility with dimmers. Our latest drivers adopted pressing terminals and patented fastener. The screwless design allows easy installation with working hours saved. Our patented housing is compatible with 0.75mm²-2.5mm² cables. We have moreover developed a whole new non-dimmable product range with this flicker-free technology this year. The compact size and wide usage in lighting caught a lot of attention. With the dip switches equipped in to switch between 8 current options, these drivers can fulfill many lighting needs, especially for track lights. The in-track models even possess an advantage with only 1/3 of the length comparing to other track light drivers. As the flicker-free technology is gaining more and more attention nowadays for eye protection concerns, we believe there is an upsurge of market need since people are laying more emphasis on health, or say, human centric lighting.  

Flicker-Free Dimmable Driver 

Flicker Free Dimmable Driver with advanced technology for optimal lighting.

This dimmable LED driver is available in 20W, 30W, 45W, 80W, 100W, 150W and 200W designs. Professionally engineered, it ensures reliable and stable performance. This highlighted LED driver is compatible assorted LED lighting products. 	 Excellent workmanship. 	 CE approved. 	 Constant voltage. 	 TRIAC dimmable LED driver.  

Dimmable LED Driver

Dimmable LED Driver for various wattages and reliable performance

Shenzhen Jisim Technology Co.,Ltd.

Supports DALI dimming and Push dimming functions, compatible with all imported DALI controllers 0.01% deep dimming, logarithmic or linear dimming curve optional and supporting single lamp, group, and scene control Ultra small volume dedicated to small aperture lighting fixtures, high power factor, high efficiency, and long lifespan Bipolar power supply, no flicker, precise control, smooth dimming curve Complies with international safety regulations and DALI certification standards 5-year warranty 

Dali dimmable driver 3w5w7w9w12w dali  led dimming driver

Dali dimmable driver for precise and efficient lighting control

Dimming Way: Triac/Phase-cut, 0-10V, 1-10V, DALI, Push Output Power: 30W-150W Output Voltage: 12V 24V IP Rating: IP20，IP66 Certificate: UL, cUL, ETL, cETL, FCC, TUV, ENEC, CE, CB, SAA, CCC, RoHS  

Slim Dimmable LED Driver

Luminglite Lighting Tech Co.,Ltd

30W,60W, 96W,100W,120W,150W,200W,250W,288W,300W,384W 

LED Dimmable Driver

LED Dimmable Driver with multiple wattage options

Quanzhou Smarts Electronic & Technology Co Ltd

Plastic case design Constant voltage led driver 60W TRIAC &amp; 0-10V dimmable mode can be switched to two-color CCT dimming mode, 100-277vac input voltage, UL certified mainly sold in North America, can be suitable for large commercial lighting projects  Feature              •Dim-all: Triac/0-10V/1-10V/10V PWM/Potentiometer •Switch to PWM or Voltage Reduce output ref. To Unique Selling Points •Switch to dual color temperature LED strips •Dimming effect: Voltage Reduce mode: 100%-0.01% dim, stepless dimming,flicker-free, PWM dim mode: 100-0.1% dim, flicker-free •Triac dim mode: Forward phase &amp; reverse phase, MLV, ELV dim •UL cUL listed, Class 2, Class P, Type HL, FCC, NEMA 4X, CE, RoHs •Wet, damp, and dry location, •Title 24 JA8 compliant •Universal input, 100-277Vac •Build in active PFC, typical power factor&gt;0.95, THD&lt;10%@120V Max. load •Constant voltage type, fine tune of output voltage •Super low loading request, works perfect at 10-100% load. •Short-circuit, over-temperature, over-load protection. •7 years warranty   Unique Selling Points： Voltage Reduce Output √Dimming range: 100%-0.01% Ultra Deep Amplitude     √The output voltage peak is in the affordable value of the LED during driver on/off and dimming, no harm to the LED for long-term using, and slow down the speed of lumen depreciation. √Works with single channel dim to warm LED strip/tape (2 wires). √Works with two channel CCT warm-dim LED strip/tape (3 wires).  Compatible PWM &amp; Voltage Reduce output √compatible with RGBCW different LED fixture √compatible with DC-DC design LED fixture, such as MR16, PAR, wall washer, linear lighting, LED strip/type  2）Compatible PWM &amp; Voltage Reduce output √compatible with RGBCW different LED fixture √compatible with DC-DC design LED fixture, such as MR16, PAR, wall washer, linear lighting, LED strip/type  Application: •LED strip/LED tape/LED module •Residential Lighting •Commercial Lighting Series Information: Include 30-340W, single &amp; multiple outputs 

60W TRIAC & 0-10V dimmable constant voltage led driver 100%-0.01% power supply

60W TRIAC dimmable constant voltage LED driver

-60W, 96W,12V/24V Available -ETL Listed -High efficiency:up to 85% -Load:6-100% -Electronic Dimmalbe: ELV, MLV, TRIAC -Dimming range:5-100% 

LED Dimmable Driver-ELV/MLV/TRIAC

ModelSMT-DI060W160-DP2PCertificateUL / FCC / CE /RoHS / Reach/ DALI / NFCOutputRated current160mA-1600mA(multiple current for choice freely by ProNFC)DC Voltage12V-54VNo-load voltage60VmaxVoltage ToleranceOutput current± 10mA for ≤ 300mA, ± 20mA for ≥ 300mA, and ± 30mA for ≥ 1000mARated power60WmaxLine Regulation&lt;0.5%Load Regulation&lt;0.5%InputVoltage Range100-277VACFrequency Range47 - 63HzPower Factor (Typ.)PF≥0.94No load power (Max)&lt;1.5WStandby power (Max)&lt;0.5WTHD(Typ.) @ full load≤15%Efficiency@ full load≥88%@120VAC 60Hz  ≥89%@230VAC 50HZ   ≥89%@277VAC 60HZAC Current(Max.)0.75AInrush Current (Typ.)28.7A, 204us@50%Ipeak@120V   55.2A, 98us@50%Ipeak@230V   66.0A, 220us@50%Ipeak@2770VLeakage current&lt;0.5mAProtectionShort CircuitHiccup mode,recovers automatically after fault condition is removedOvervoltageHiccupor constant power mode,reboots automatically after fault condition is removedOver temperatureAmbient temp. over 55 ± 5℃, output current will be reduced to 50%;Ambient temp.Over 45 ± 5℃,recovers automatically.Ambient temp.over 75 ± 5℃, output current will be reduced to 0%;Ambient temp.Over 45 ± 5℃,recovers automatically.EnvironmentWorking TEMP-40~+60℃ (see below derating curve) Working Humidity20 -90%RH non-condensing Storage TEM.,Humidity-40 - +80℃,10 - 95% RH TEMP.coefficient±0.03%/℃(0 - 50℃)Vibration10~500Hz,2G12min./1 cycle,period for72min. each along X,Y,Z axesSafety &amp; EMCSafety standardsEN61347-1  EN61347-2-13(EU) &amp; UL8750 (US)Withstand voltageI/P-O/P:3.75KVAC (EU) &amp; I/P-O/P:1.8KVAC (US)Strobetest standardIEEE 1789Flicker freelightning surgeDM:2KV Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%RHEMC EmissionEN55015  EN61000-3-2,3(EU) &amp; FCC Part15 Subpart B; ANSI C63.4:2014(US)OthersNet Weight0.38KGDimension314*30*21.7mm(L*W*H)Packingpcs /CTNNotes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.2. To extend the driver's using life, please reduce the loading at lower input voltage .

slim size 60 watt 1600ma constant current DALI-2 & PUSH dimmable led driver power supply

60 watt dimmable LED driver with DALI 2 support

 	 0-10V / 1-10V / PWM&nbsp;CV Dimmable Driver 	 OUTPUT 12V / 24V, 20W-360W  

CV Dimmable Driver

CV Dimmable Driver for LED lighting applications

— UL, cUL listed, Class 2 unit, Type HL rated. — Universal AC input: 120VAC — Full protection aluminium case, for dry, damp, wet location — Flicker-free — Triac dimming — Suitable for linear lighting, tape light, neon Light, profile and cabinet Lighting application. — 60W, 96W,120W,192W,180W,288W---12V/24V Available 

GRE Alpha Electronics Ltd

The displayed constant voltage LED driver is designed to offer smooth and reliable dimming without flicker. It has a durable housing with electrical data printed on the surface and is easy to install. This constant voltage LED driver flaunts a long working life and can work with all kinds of lighting applications. 	 80W constant voltage dimmable LED driver. 	 Offer smooth and reliable dimming without flicker. 	 Durable housing with electrical data printed on the surface. 	 Easy to install. 	 Long working life. 	 Can work with all kinds of lighting applications.  

Dimmable LED Driver for smooth and reliable dimming

Shenzhen Ottima Technology Co.,Ltd

5 in 1 Dimmable LED Driver (0-10V&amp;1-10V &amp;PWM&amp; Triac dimming function in 1 driver) 3 Levels Power in 1 driver for Optional Auxiliary Power Supply (Optional) 5V/12V External NTC Extend OTP Recommend NTC resistance 500K (0/1-10V port) Small size 

5 in 1 Dimmable LED Driver

ModelSMT-DI040W140-DP2PCertificateUL / FCC / CE /RoHS / Reach/ DALI / NFCOutputRated current140mA-1400mA(multiple current for choice freely by ProNFC)DC Voltage12V-54VRated power40WmaxVoltage Tolerance±30mANo-load voltage60VmaxLine Regulation&lt;0.1%Load Regulation&lt;0.1%InputVoltage Range100-277VACFrequency Range47 - 63HzPower Factor @ full load≥0.95THD(Typ.) @ full load&lt;10%Efficiency@ full load&gt;85.5%@120VAC 60Hz  &gt;86.5%@230VAC 50HZ  &gt;86.5%@277VAC 60HZNo load power (Max)≤1.5WStandby power(max.)&lt;0.5WAC Current(Max.)&lt;0.56AInrush Current (Typ.)28.8A, 256us@50%Ipeak@120V   55.2A, 130us@50%Ipeak@230V   66.5A, 259us@50%Ipeak@277VLeakage current&lt;0.5mAProtectionShort CircuitHiccup mode,restartsautomatically after fault condition is removedOver loadHiccuporConstant power mode,restartsautomatically after fault condition is removedOver temperatureAmbient temp.Over 55 ± 5℃, output current will be reduced to 50%;Ambient temp.Over 45 ± 5℃, recovers automatically after temp. drops.Ambient temp.Over 75 ± 5℃, output current will be reduced to 0%;Ambient temp.Over 45 ± 5℃, recovers automatically after temp. drops.EnvironmentWorking TEMP-40~+60℃ (see below derating curve) Working Humidity20 -90%RH non-condensing Storage TEM.,Humidity-40 - +80℃,10 - 95% RHTEMP.coefficient±0.03%/℃(0 - 50℃)Vibration10~500Hz,2G12min./1 cycle,period for72min. each along X,Y,Z axesSafety &amp; EMCSafety standardsEN61347-1  EN61347-2-13 (EU) &amp; UL8750 (US)Withstand voltageI/P-O/P:3.75KVAC (EU) &amp; I/P-O/P:1.8KVAC (US)Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%RHEMC EmissionEN55015  EN61000-3-2,3(EU) &amp; FCC Part 15 ,Subpart B; ANSI C63.4:2014 (US)EMC ImmunityIEC/EN61000-4-2,3,4,5,6,8,11; EN/EN61547(EU)Power supplyStrobe test standardIEEE 1789Flicker freelightning surgeLine to line:2KV OthersNet Weight0.32KGDimension324.7*34.8*24.1mm(L*W*H)Packing****pcs /CTNNotes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.2. To extend the driver's using life , please reduce the loading at lower input voltage .

140ma-1400ma DALI-2 & PUSH dimmable constant current 40W led driver power supply for indoor

140W DALI 2 PUSH dimmable constant current LED driver

1.Dimmable/non-Dimmable 2.loading 10-100% 3.PF more than 0.9 4.Flicker free 5.Input 100-277Vac 6.Wattange range:30-384W 

Junction boxed LED Driver

Junction boxed LED Driver with dimmable options

— Meet U.S.,Canada standard — UL/cUL,FCC ,Class 2,Class P — Universal input range:120-277Vac — 5-in-1 Dimming:    Triac/Phase,0-10V,1-10V, Potentiometer,10V PWM 5 in 1 Dimming — short circuit,over voltage and overload protection — Suitable for dry,damp locations — ≤1% dimming, dim to dark — No minimum load — 5 years warranty — Applied to LED lighting 

5 IN 1 Dimmable Driver-UL Certified

Guangdong Aidimming electronics co.,ltd

the CPU is used to control the dimming curve and the mixed frequency control to achieve the visual angle perception brightness. The raw materials used are first-line brands and imported chips are designed for ultra deep dimming,It matches a variety of intelligent dimming systems on the market, accurately controls the brightness, comes with a slow start-up and ultra small size design 1. integrate multiple signal dimming interfaces 2. digital control output flicker free 3. AC input 100-250v range 4. natural air cooling, moisture-proof, heat conducting silicone heat dissipation process 5. deep dimming design 6. multiple protection functions 7. crimping design, convenient and fast 8. 8 gear current selection  

30W Dali dimming driver/DT6/ International version

30W Dali dimming driver for precise brightness control

The standard Dali signal is used to control the brightness and slow up time. One power supply only occupies one address. The raw materials used are first-line brands, and the imported chips are super high Deep dimming design, matching a variety of Dali intelligent dimming systems and KNX Protocol Intelligent Systems on the market. Accurately control the brightness of the light, with silicone heat conduction inside The technology makes the heat dissipation balance of electronic components more stable 1. Dali standard interface and standard DT6 protocol conform to Dali 144 standards 2. Dali2 certification, Dali member 3. Digital control output is adopted, and there is no stroboscopic 4. AC input 200-250v range 5. Natural air cooling, moisture-proof, heat conduction, silica gel heat dissipation process 6. Deep dimming design 7. Multiple protection functions 8. Ultra small volume design 9. Crimping design, convenient and fast 10.4 gear current selection 

 20W Dali dimming driver/DT6

model SMT-012-030VTDHV2 SMT-024-030VTDHV2 Output DC Voltage 12V 24V RatedCurrent 2.5A 1.25A RatedPower 30W 30W Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Load Regulation ±1% Input Voltage Range 100-277VAC Frequency Range 47-63Hz Power Factor(Typ.)@ full load 0.99@120VAC 0.98@277VAC 0.99@120VAC 0.95@277VAC THD（Typ.）@ full load &lt;20% Efficiency（Typ.）@ full load 79% @120Vac   80%@277Vac 79% @120Vac   80%@277Vac AC Current（Max.） 0.5A@100Vac Inrush Current（Typ.） 7A, 50%, 420us @120Vac   12A, 50%, 480us @277Vac Leakage current &lt;0.50mA protection Working TEMP. -40～+60℃(see below derating curve) Working Humidity 20～90%RH, non-condensing Storage TEMP. Humidity -40～+80℃，10～95%RH Environment TEMP .coefficient ±0.03%/℃（0～50℃） Vibration 10～500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes Safety standards UL8750+UL1310 Withstand voltage I/P-O/P:1.88KVAC  Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH Safety&amp;EMC EMC EMISSION FCC Part 15 B Working TEMP. -40～+60℃(see below derating curve) Working Humidity 20～90%RH, non-condensing Storage TEMP. Humidity -40～+80℃，10～95%RH Others Weight About 0.95Kg Size 165*94.5*40mm（L*W*H） packing 10PCS/CTN（L*W*H） Notes 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. 

277Vac Triac 0-10V 5 in 1 dimmable constant voltage led driver 30W

277Vac Triac dimmable constant voltage led driver

ModelSMT-DI040W140-D4IP-YTCertificateUL/FCC/CE /ClassP/TYPE HL/SELV/ RoHS / Reach/ENEC/ICES/UKCAOutputRated current140mA-1400mADC Voltage12-54VDCRated power60WmaxVoltage ToleranceOutput current ± 20mALine Regulation&lt;0.1%Load Regulation&lt;0.1%InputVoltage Range100-277VACFrequency Range47 - 63HzPower Factor (Typ.)&gt;0.99@120VAC 60Hz  &gt;0.98@230VAC 50HZ  &gt;0.95@277VAC 60HZNo load power (Max)&lt;1.5WStandby power (Max)&lt;0.5WTHD(Typ.) @ full load&lt;11%@120VAC  &lt;9%@230VAC  &lt;10%@277VACEfficiency @ full load&gt;85.4%@120VAC 60Hz  &gt;86.8%@230VAC 50HZ  &gt;86.8%@277VAC 60HZAC Current(Max.)0.41A@100VAC 60HzInrush Current (Typ.)28.8A, 256us@50%Ipeak@120V   55.2A, 130us@50%Ipeak@230V66.5A, 259us@50%Ipeak@277VLeakage current&lt;0.5mAProtectionShort CircuitHiccup mode,recovers automatically after fault condition is removedOvervoltageHiccup or constant power mode,reboots automatically after fault condition is removedOver temperatureAmbient temperature over 55℃±5℃ to reduce output to 50%;The ambient temperature drops to 45℃±5℃and automatically recovers.Ambient temperature over 75℃±5℃ to reduce output to 0%;The ambient temperature drops to 45℃±5℃and automatically recovers.EnvironmentWorking TEMP-40~+50℃ (see below derating curve) Working Humidity20 -90%RH non-condensing Storage TEM.,Humidity-40 - +80℃,10 - 95% RHTEMP.coefficient±0.03%/℃(0 - 50℃)Vibration10~500Hz, 2G12min./1 cycle,period for 72min. each along X,Y,Z axesSafety &amp; EMCSafety standardsEN61347-1  EN61347-2-13(EU) &amp; UL8750 (US)Withstand voltageI/P-O/P:3.75KVAC  I/P-FG:1.5KVAC  O/P-FG:0.5KVACStrobetest standardIEEE 1789 Flicker freeSurge Immunity TestAC Power Line:Differential Mode 2 kV, Common Mode 4 kVIsolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%RHEMC EmissionEN55015  EN61000-3-2,3(EU) &amp; FCC Part15 Subpart B; ANSI C63.4:2014(US)OthersNet Weight255gDimension296.7*30*21.7mm(L*W*H)Packing32*24.5*298mm  50pcs /CTNNotes1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.2. To extend the driver's using life,please reduce the loading at lower input voltage.3. LED driver Meets the harmonic emissions requirements of ANSI C82.77-10.

DALI-2 (D4i) dimmable constant current plastic case 40w led driver output 1400mA 

DALI 2 D4i dimmable constant current LED driver

 PWM Dimming Electronic LED Driver 300watt 12vdc&nbsp;
Features&nbsp;  	 Output constant voltage&nbsp;&nbsp;&nbsp; 	 Input voltage range 100-277VAC&nbsp;&nbsp;&nbsp;&nbsp; 	 Built-in PFC function / PF&gt;0.97 &nbsp;&nbsp;&nbsp; 	 Efficiency &gt;88%&nbsp;/ Dimming range: 0~100% 	 Protections:short circuit/over voltage/over heat 	 PWM output, does not change the color index&nbsp;&nbsp; 	 Cooling by free air convection&nbsp;/ Flicker-free &nbsp;&nbsp; 	 Work with leading edge and trailing edge triac&nbsp;dimmers&nbsp;available 	 Metal&nbsp;housing, suitable for dry, damp, wet location 	 PWM output, does not change the color index&nbsp;&nbsp; 	 Strong compatibility, flicker-free dimming 	 Suitable for LED lighting and moving sign applications 	 Compliance to worldwide safety regulations for lightings.&nbsp; 	 Compatible with Forward&nbsp;phase, Reverse phase, Triac, MLV, ELV Dimmers 	 7 years warranty&nbsp; &nbsp;  
 Dimming Operation 

Output constant current level can be adjusted through input&nbsp;terminal of the AC phase line(L) by connection a triac dimmer.
Compatible with Leading edge or trailing edge triac dimmers, but trailing edge dimmers work better.
Please try to use dimmers with power at least 1.5 times as the output power of the driver.
&nbsp;

PWM Dimming Electronic LED Driver

36w Triac dimmable led power supply slim LED&nbsp;driver
 Features&nbsp;  	 Output constant voltage type&nbsp;Output Voltage(V) 12V DC 	 Input voltage range 100-277V AC&nbsp;&nbsp; 	 Class 2, Class P, Type HL approval&nbsp; 	 Built-in PFC function&nbsp;/ Efficiency &gt; 82%&nbsp;/ PF&gt; 0.99 	 Dimming range: 0~100%&nbsp;/ load: 5~100% 	 Protections: Short circuit / over voltage / overheat 	 IP20&nbsp;design for indoor&nbsp;dry or damp environment&nbsp;installations 	 Cooling by free air convection&nbsp;&nbsp;&nbsp; 	 Work with leading-edge and trailing edge Triac&nbsp;dimmers&nbsp;available 	 PWM output does not change the color index&nbsp; 	 Full protection aluminum&nbsp;housing, for dry, damp, wet location 	 Strong compatibility, flicker-free dimming 	 Suitable for LED lighting and moving sign applications 	 Compliance to worldwide safety regulations for lighting 	 7 years warranty   Dimming Operation&nbsp;  	 Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer. 	 Compatible with Leading edge or trailing edge triac dimmers, but trailing edge dimmers work better.. 	 Please try to use dimmers with power at least 1.5 times as the output power of the driver.  

My Sourcing

Unfollow this supplier?

Unfollow this supplier?